Use of global variable from local variables for business rules

Similar Questions

• Using a Global Variable for the input recorder DisplayRange

  I'm assuming; Since I can't do it; that you cannot change the display range of a graphic recorder by using a variable.  If there is a way I'd love to know how.

  Thank you!

  Determine if you can use a global variable is to click right in the parameter field. If the global variable is available in the context menu, then you can use a variable y.

  You can use a variable of the y-axis from the settings.

  You cannot use a variable for the display range of the x-axis parameter. This is because DASYLab needs to know the amount of memory to be allocated at the beginning of the measure.

• How to set global variables for use by all THE #subform [0] items of form1. ?

  Hi all

  I don't know how to code javascript but am new to Adobe LiveCycle.  When I open the script editor, I have the following code (the code is in United Nations in bold):

  -form1. #subform [0]: initialize :-(FormCalc, client).

  //////////////////////////////
  TO START: SET GLOBAL PRICES.
  //////////////////////////////

  var Cityscope_Sydney_CostUser1 = 60,39;
  var Cityscope_Sydney_CostUsers2to5 = 3.02;
  var Cityscope_Sydney_CostUsers6to20 = 1.21;
  var Cityscope_Sydney_CostHardCopyWithOnline = 14.59;
  var Cityscope_Sydney_CostHardCopyWithoutOnline = 54,67;
  var Cityscope_Sydney_CostHardCopyAdditional = 14.59;

  var Cityscope_NorthSydney_CostUser1 = 48,40;
  var Cityscope_NorthSydney_CostUsers2to5 = 2.42;
  var Cityscope_NorthSydney_CostUsers6to20 = 0.97;
  var Cityscope_NorthSydney_CostHardCopyWithOnline = 14.59;
  var Cityscope_NorthSydney_CostHardCopyWithoutOnline = 43,54;
  var Cityscope_NorthSydney_CostHardCopyAdditional = 14.59;

  
  ////////////////////////////
  END: SET GLOBAL PRICES.
  ////////////////////////////

  -form1. #subform [0]: enter :-(FormCalc, client).

  -form1. #subform [0]: output :-(FormCalc, client).

  -form1. #subform [0]: calculate :-(FormCalc, client).

  -form1. #subform [0]: validate :-(FormCalc, client).

  -form1. #subform [0]: preSave - (FormCalc, client).

  < < = etc etc etc = > >

  -form1. #subform [0]. Item1Cost::initialize :-(JavaScript, client).

  -form1. #subform [0]. Item1Cost::enter :-(FormCalc, client).

  -form1. #subform [0]. Item1Cost::exit :-(FormCalc, client).

  -form1. #subform [0]. Item1Cost::calculate :-(JavaScript, client).

  Store the values of the form of friendly names.
  var AreaSelected = Item1Area.rawValue;
  var NumberOfUsersSelected = Item1Users.rawValue;

  Declare other variables.
  var Users1Calculation;
  var Users2to5Calculation;
  var Users6to20Calculation;

  
  Calculate the cost to the "components" user will depend on the number of users selected for the region.
  Switch (true)
  {
  If (NumberOfUsersSelected < 2):
  Users1Calculation = NumberOfUsersSelected * Cityscope_Sydney_CostUser1;
  Users2to5Calculation = 0.00;
  Users6to20Calculation = 0.00;
  break;
  If (NumberOfUsersSelected > 1 & & NumberOfUsersSelected < 6):
  Users1Calculation = Cityscope_Sydney_CostUser1;
  Users2to5Calculation = (NumberOfUsersSelected - 1) * Cityscope_Sydney_CostUsers2to5;
  Users6to20Calculation = 0.00;
  break;
  If (NumberOfUsersSelected > 5):
  Users1Calculation = Cityscope_Sydney_CostUser1;
  Users2to5Calculation = 4 * Cityscope_Sydney_CostUsers2to5;
  Users6to20Calculation = (NumberOfUsersSelected - 5) * Cityscope_Sydney_CostUsers6to20;
  break;
  by default:
  Alert ("BROKEN: calculate the individual components of cost of use will depend on the number of users selected for the region.");
  }

  apply the total cost for this article
  Item1Cost.RawValue = Users1Calculation + Users2to5Calculation + Users6to20Calculation;

  -form1. #subform [0]. Item1Cost::validate :-(FormCalc, client).

  -form1. #subform [0]. Item1Cost::MouseEnter :-(FormCalc, client).

  -form1. #subform [0]. Item1Cost::mouseExit :-(FormCalc, client).

  -form1. #subform [0]. Item1Cost::change :-(FormCalc, client).

  -form1. #subform [0]. Item1Cost::full :-(FormCalc, client).

  -form1. #subform [0]. Item1Cost::MouseUp :-(FormCalc, client).

  -form1. #subform [0]. Item1Cost::MouseDown :-(FormCalc, client).

  -form1. #subform [0]. Item1Cost::click :-(FormCalc, client).

  -form1. #subform [0]. Item1Cost::preSave - (FormCalc, client).

  -form1. #subform [0]. Item1Cost::postSave - (FormCalc, client).

  -form1. #subform [0]. Item1Cost::prePrint - (FormCalc, client).

  -form1. #subform [0]. Item1Cost::postPrint - (FormCalc, client).

  -form1. #subform [0]. Item1Cost::preSubmit:form - (FormCalc, client)-

  -form1. #subform [0]. Item1Cost::docReady - (FormCalc, client).

  -form1. #subform [0]. Item1Cost::docClose - (FormCalc, client).

  -form1. #subform [0]. Item1Cost::ready:form - (FormCalc, client)-

  -form1. #subform [0]. Item1Cost::ready:layout - (FormCalc, client)-

  -form1. #subform [0]. Item1Users::initialize :-(FormCalc, client).

  -form1. #subform [0]. Item1Users::enter :-(FormCalc, client).

  -form1. #subform [0]. Item1Users::exit :-(FormCalc, client).

  -form1. #subform [0]. Item1Users::calculate :-(FormCalc, client).

  -form1. #subform [0]. Item1Users::validate :-(FormCalc, client).

  -form1. #subform [0]. Item1Users::MouseEnter :-(FormCalc, client).

  -form1. #subform [0]. Item1Users::mouseExit :-(FormCalc, client).

  -form1. #subform [0]. Item1Users::change :-(FormCalc, client).

  -form1. #subform [0]. Item1Users::full :-(FormCalc, client).

  -form1. #subform [0]. Item1Users::MouseUp :-(FormCalc, client).

  -form1. #subform [0]. Item1Users::MouseDown :-(FormCalc, client).

  -form1. #subform [0]. Item1Users::click :-(FormCalc, client).

  -form1. #subform [0]. Item1Users::preSave - (FormCalc, client).

  -form1. #subform [0]. Item1Users::postSave - (FormCalc, client).

  -form1. #subform [0]. Item1Users::prePrint - (FormCalc, client).

  -form1. #subform [0]. Item1Users::postPrint - (FormCalc, client).

  -form1. #subform [0]. Item1Users::preSubmit:form - (FormCalc, client)-

  -form1. #subform [0]. Item1Users::docReady - (FormCalc, client).

  -form1. #subform [0]. Item1Users::docClose - (FormCalc, client).

  -form1. #subform [0]. Item1Users::ready:form - (FormCalc, client)-

  -form1. #subform [0]. Item1Users::ready:layout - (FormCalc, client)-

  .. and so on and so forth...

  In short, I want the code in:

  -form1. #subform [0]. Item1Cost::calculate :-(JavaScript, client).

  .. .to be able to access the variables I created in:

  -form1. #subform [0]: initialize :-(FormCalc, client).

  
  (I guess that's where I store global variables)

  At this point, global variables are not accessible with the above configuration.  Was the only one I can get this working is to cut and paste the Globals in each item of form1. #subform [0], which of course defeats the purpose of global variables!  I intend to have a lot more items so wouldn't duplicate global variables for each of them!

  Can someone show me how to do this?

  Any help is very appreciated!

  Thank you

  Stanbridge

  Post edited by: stanbridgej - colors and fonts or not will not save.  Are bolded my question make (non-fat) code easier to read (I hope).

  I haven't used Formccalc, but I thought it would be the same regardless. Insert a script object to the top of the hierarchy and call it, for example "sco." Paste the Globals. Then refer to variables of the extent that sco. Cityscope_Sydney_CostUser1, etc. Make one

  App.Alert (sco. Cityscope_Sydney_CostUser1);

  one of the fields. If the debugger is activated, it will tell you if it cannot resolve the reference as "sco. In this case, you may need to use the som expression to reference the script object, for example

  var scoScript = xfa.resolveNode ("topOfHierarchy.sco");

  scoScript.Cityscope_Sydney_CostUser1

  But if as close as possible to the top of the hierarchy above should work.

• global variables for the XML plugin problem

  Hello world

  recently I started working on a dialog box SOUTH, where the user can load the *.xml files in DIAdem.So much my code for the button looks like this:

  ....

  Call the FileNameGet ('ALL', 'FileRead","*.xml")
  Call DataFileLoad (FileDlgName, "XML_Plugin", "Load")

  ....

  And I must say that it works very well! I am able to load all listed in the devices file. BUT when I tried a number of loading devices, I used a global variable, that I defined in the vbscript file that I load the SOUTH since, I've noticed that global variables, I've defined with GlobalDim are not defined in the vbs.:mansurprised of XML_Pluging:

  Then I started to experiment and so far without success, no matter where I define global variables, in my plugin *.xml all not defined! The native commands even and DIAdem functrions does not work. If I run the script in tiara, it shows no errors, but when I use the plugin to open a file, then it gives an error. For example, MsgBox is not allowed.

  I used the plugin example for *.xml, which was published on the Web site of NOR, and I made a few changes. But overall I have it has not corrupted and I kept the same structure:

  Void ReadStore (File)

  Dim XmlFile: xmlFile = File.Info.FullPath
  '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
  'open the file '.
  OpenXMLFile xmlFile

  End Sub

  Void OpenXMLFile (xmlFile)
  '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
  ' Open MS - Xml Parser
  'Create the ActiveX object for the Microsoft XML parser.
  Dim XDoc: set xDoc = CreateObject ("MSXML2. DOMDocument.3.0")

  "Try to load the XML document
  If xDoc.Load (xmlFile) = False Then
  "Failed to load the document XML.
  RaiseError ' unable to load XML document!
  End If

  protected originalLocale: originalLocale = Getlocalte
  "SetLocale" en - us ".

  "The XML document loaded successfully!
  '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

  '----------------------------------------------
  "Read the header information.
  '----------------------------------------------

  Here, I have read some values of the header and then I loop on all devices present in the file!

  So basically I have two subroutines and that's all.

  SetLocale originalLocale

  End Sub

  So what I am doing wrong? Why global variables and other functions do not work. Is it because there is xml code in the script this way or it's a version problem?

  I use DIAdem 10.2. If I use global variables in other vbscripts, I use to draw curves for example I have no problem. Now I'm no *.xml code and no subroutines.

  I'd appreciate any solution that will make my *.xml plugin to work.

  Hi fscommand.

  It is expected all behavior.  Use XML, as all VBScript DataPlugins, runs in a separate VBScript host of the DIAdem VBScript host.  DIAdem VBScript host adds all global variables green and Red controls global to host Microsoft VBScript standard.  Use VBScript host has its own special abilities (file object, root object), but there is NO access to Globals green or red blanket orders in the reception of DIAdem VBScript.  Your SUDialog runs in a third host VBScript, which is separated from the other two and the other two are not capabilities (command SUDialog callback functions), but the SUDialog VBScript host and VBScript tiara share all global variables green and Red orders overall.

  Normally all blue VBScript commands are allowed in all 3 VBScripts hosts, but in the case of the DataPlugins MsgBox and InputBox functions were especially restrained because the dialogues could cause a lot of trouble with the DataFinder.  In fact, they have been allowed to 9.1 tiara which was the latest version of tiara for the DataFinder appear.

  So, why do you want to pass information between the XML use and tiara?  If you want to use to share information with DIAdem, then you should just expose every piece of information as a new property in the data portal, which can read and use the code VBScript DIAdem.  The path of the XML file is already available inside the use of XML.  What other information in the call VBScript DIAdem do you need to share with the use?

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• Global variables for circular buffer

  Hallo!

  I have another question:

  I need to have a variable circular buffer size. So I want set size circular buffer by a global varable.

  Is this possible? I tried to use the global variable like {VAR_01} to insert in the field that you want to the memory size circular buffer, but dasylab puts only a zero in the field.

  Thank you and have a nice day.

  Hilby

  Unfortunately, it is not possible to have a variable size buffer. Right-click in the textfield corresponding: the shortcut menu does not show an entry to select the global variable from a list.

• Can I use a global variable to determine the event?

  If I want to switch using MouseEvents or TouchEvents, can I use a global variable to switch between the two?

  For example,.

  var myEvent:String = new String();

  myEvent = "MouseEvent.MOUSE_UP."

  myEvent = "TouchEvent.TOUCH_TAP";

  myObject.addEventListener (myEvent, doFunction);

  This does not work, but I was wondering if there was a good way to achieve this so that I can switch between the modes of entry easily during the test across different devices?

  do not use quotation marks:

  var myEvent:String;

  myEvent = MouseEvent.MOUSE_UP;

  myEvent = TouchEvent.TOUCH_TAP;

  myObject.addEventListener (myEvent, doFunction);

• How to use a substitution variable in a rule of load?

  I need to use a substitution variable in a rule of load in a column, I will receive a parameter to correct the month and year of the values in the loading data, could someone tell me if this is possible. I put an expression '& Yearproc' in the value column, but it does not work.

  If you are a member of the WORLD (or even if not, you can register for free associate membership) you can download the presentation from Glenn since 2009 Kaleidoscope "little used Essbase features (such as data mining and triggers) ' - there is a section to this presentation on the substitution variables - it does a great job showing how it works.

  Go to: www.odtug.com, and then Tech, then Essbase/Hyperion resources and search for Schwartzberg. It is currently the ninth presentation on the list - I think that this change based on the popularity of downloads.

  Kind regards

  Cameron Lackpour

• anyone can share me some references for business rule

  Hi, I am a beginner for business rule.
  And I learned "The administrator of the Hyperion Business Regulation Guide", it is very useful.
  But anyone can share me any student guide for a simple way to start with the business rule.
  
  For example, I learned the workforce planning are example of rule. I found each rule has been to start with "SET CREATENONMISSINGBLK ON;", but I can't find any description for it in the Administrator's guide.
  
  Also, in the form of Member, each begins with "[OpenInputValueBlock]" and end with "[CloseInputValueBlock]".
  Should I write the formula in this kind of structure?
  
  In all, can someone share me some references for how to start with BR as "hello world".
  
  Thank you very much!

  Management rules are just as improved essbase calc scripts so basically use the same language, the best source is the ref of tech essbase that contains information about the functions and calc commands.
  If you go to-http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?calc_func_chap.html
  Calculation of sections and orders of calculation functions are those to have a read of.

  [OpenInputValueBlock] is mainly used by workforce planning applications, the code is converted when it is pushed to essbase planning, have a read of - http://download.oracle.com/docs/cd/E17236_01/epm.1112/hp_admin/ch12s07s03s02.html for more information, you don't need to code it well.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• What are the best practices for use of GLOBAL Variables

  Hello
  
  Please guide how Global Variables can be declared and how they can be initialized.
  
  
  Further please guide what are the impacts of the Variables(if any) world on the memory of the CLIENT or the SERVER, if they are not initialized or released after use.
  
  
  Thank you.
  
  Kind regards.

  There are 255 characters (fixed) - or a less than before, don't know if they still are that length.
  My preference is not to use and use the settings or package variables. There is no real control of globals, so you may find yourself with an applications which has a good number of them which is used only once but which persists during the user's session.

• How to use the global variable in the table target?

  Hello

  I am trying to load several files into a single interface. the data is loaded successfully. 92. the files are there. for this I used variables and package.

  My requrement is 92 files of data loaded into the target table. I want to know what data from file.

  to this I added a column (filename) to the existing target table.

  If I used joints (not same condition), its totally wrong. all file names are coming.

  Please see the following screenshots.

  

  exit; target table.

  

  in fact in the target table. first 10 lines are coming from file.i.e first _ACCOUNT_LIMIT_511.TXT. but all the files names are coming.

  I'm confuse. After the first data file inserted then insert second data file. in that all file names are coming. Please help me.

  I thought that the global variable is preferable to identify the data came from which file.

  to do this, the global variable is used in the target table. I don't always have my exit.

  Please help me.

  Thanks in advance.

  

  Hello

  You can use the same way, how you use the project variable, just you have to do a thin is #GLOBAL.variable_name for example: #GLOBAL. SMART_AL_FILE_NAME_S

  Note: Make sure you that while you use one variable overall in interface, indicator should be staged as you chose above the screen

  hope this helps you

  Kind regards

  Phanikanth

• I don't get to use the global variable. Take a look in my form, please.

  Hello.

  I'm ashamed. I'm not able to use a base on the LiveCyle feature: Global Variable / object.

  I have a textfield for the user to put your name. Then, the user must click at the base. His name and value must be of value to a global variable, then I would use this value in any form.

  This look at my example I would use this value.

  https://Acrobat.com/#d=k0YlC1MXEdVTh1g2TXAJxw

  What is the error? I tried to put as a global variable, but it does not work.

  PS: Call of the value using textfield (TextField.rawValue = TextField2.rawValue), it works fine, but I prefer to use the variable

  Thank you very much.

  Hi Rafael,.

  I'm good thanks

  I do not know if I understood the question, but I think you're asking if it is possible to have a field that displays the value of a global variable (i.e. the 'view' you refer to), which is updated automatically via scripts of calculation or similar to but not dependent on another event, such as 'click '.

  In my view, using a linked across the object world is the only way, and you are right - it is certainly easier.

  Please let me know if I've not understood the question

  Thank you

  Tim

• How to get the global variable for an instanceId

  Hello
  
  I have data in global variables of an instance level. And using that instanceId, how can I get the global-level variables data.
  
  Please me tips
  
  
  Thank you
  Sailendra

  Hello
  I guess you want to get the value of the external variable within the process. You can do like this:

  assuming that it is of type string. For other types of type cast properly...
  String extVarValue = (String) (New Component(instance: this)).get(attribute: extVarName);

  Replace "extVarName" with your project name. It returns the value of your project for the instance that you are currently working.

  -Thank you,
  Malar.

• Global variables for alerts

  Is this possible, or currently a function, to use the system or global variables in alerts?

  We are transmitting these alerts in a ticketing system, and they keep opening the same ticket, because there is no difference in the subject line.

  Would it be possible to have a feature, a box to check, or variable that can be added to the subject line of the alert or alerts name field?

  Example:

  

  Name: % DATE logged courante% TIMES

  Or maybe a checkbox that adds the date and time to the subject line of the e-mail?

  I love! You can open a query on loginsight.vmware.com?

• Substitution of Variables in business rules...

  Hello
  I have two variabels substitution essbase. I've used them in my data forms. But when I write a business rule in essbase that I don't get to use these substitution variables. I want to say... a business rul never uses a substitution variable? If so, how can I use them? Any idea? I use v 11.1.1.1.
  
  Thank you.

  There is no option for get about it. Just type in your rule

  for example:

  FIX(&MYSUBVAR,...)

  .....

  ENDFIX

• Best practices for business rules

  Our business rules have
  Difficulty ([cost center])
  
  to extract Center cost of the user of its form to make it work faster.
  
  What is the best practice for running the same rule of business, but for all Center cost? Will it put this business rule in a menu somewhere and let him invite users to manually type "Cost Center" so that the business rule treats all cost centers?
  Thank you.
  David

  We always use the method that John described. Having two versions of the same business rule. Accepting a guest of execution for the "user" of the business rule version. Another fixed on all the level zero for the 'admin' of the business rule version.