Images the memory footprint

Similar Questions

• Acquisition of images with 3 USB cameras causing too many uses of the memory/cpu

  Dear experts,

  I'm trying to capture images with 3 cameras USB, located in 3 different positions. I have to initialize each cameras using USB list vi camera when switching between cameras. I realize that, by making this method causing too many uses of the memory/cpu and can cause CPU hang up. If I stop the program, the memory/cpu counter are down.

  Do you know how to reduce this problem.

  Thank you

  Hart

  
  

• Lost all my images on the memory card

  I just bought an A2300 and he took on a week hiking trip in Colorado.  At the end of the trip, I took the memory card from the camera and gave it to one of the other backpackers to load my images on his Mac.   He said he saw half a dozen on the map on the .jpg files, but couldn't open them.  When he gave me the card back and I put it in the camera, the card was empty!  I had more than 100 photos on this card when I handed to him.  Now I have nothing.  Any ideas on what happened to all the files and what I can do to recover all the images?

  There are several threads on this topicalready & many lists some software free links interesting to try BUT here is the link to a very good program that you can test drive to see if the images are there & recoverable before you pay for it. IF she finds them you know at least they exist & that you have the choice between either pay for licensed software or try the free stuff & see if it works for you.

  http://www.LC-tech.com/PC/SanDisk-RescuePRO-and-RescuePro-Deluxe/

• I usually use picasa to upload my images, but for some reason any 'auto play' does not appear when I insert the memory card. Any advice?

  When you use picasa to upload my images I usuall just put the memory card in the Tower, AutoPlay appears and then I can view, download, etc... But now the auto dish doesn't appear so that I can tdoen load one of my images from picasa. Can someone help me with this? Thank you

  Hello

  I suggest you to refer to the following Microsoft article and check if it helps.

  Troubleshoot AutoPlay:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Change AutoPlay settings:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  For more information, see the following Microsoft article.

  AutoPlay: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Hope the information is useful.

• Will not let me load the images of memory in pictures on my new MacBook

  I can't upload pictures from a memory card in Photos.  Know the memory card is full at halfway but show anything when I try this.

  On MacBook version 10.11.5

  Exactly how you do that? Using a card reader? Using a USB connection? What camera? What has changed since it worked?

  What else can you tell us?

  LN

• images dialog box is empty when you insert the memory card

  This is after you have inserted a card high capacity in the player, which hung the memory slot.  Now just insert a regular memory card, the dialog box appears, but there is nothing in it.

  Sorry if the info seems confused but maybe the
  answer is here somewhere.

  FWIW... There used a similar problem with a Sony memory
  Stick... the solution is to insert the stick into the drive and
  Restart the computer... somehow this would reset the
  stick.  I don't know if it will work for you.

  You may also check your AutoPlay settings...
  If you insert the card and go to... Start / my computer...
  and right-click on the drive letter for the location of in the map is...
  choose... Properties / AutoPlay tab...

  Choose... Mixed content...
  Tick... Select an action to perform
  On the left, click on the default button / apply / OK.

  Give it a try...

  It is possible that your media player is not compatible
  with the SDHC technology. The best is maybe to buy
  an external drive that is compatible SDHC or download
  Unit photo using a USB cable.

  Regarding the card... have regular SD, you tried to manually
  Download the pictures?

  If you connect the device to your PC via a USB cable, turn
  on the camera... then go to... Start / my computer... it may be
  listed as a drive letter...

  If_yes_right click on the drive letter and select... Explorer or
  Open... This should display the directory of the memory card.
  You can copy and paste or drag and drop the files from there to a
  folder on your hard drive.

  (The same steps work if you have a media player...
  When you go to... Start / computer... the media slots
  Drive should be listed under... "Removable disk" with a drive
  letter.)

  Finally... the AutoPlay Repair Wizard can be worth a try:

  Microsoft Autoplay Repair Wizard
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=c680a7b6-e8fa-45C4-A171-1b389cfacdad

• Portege Z930 - how to clear the memory of the fingerprint sensor?

  Hello

  Tell me how to clear the memory of the fingerprint sensor?
  Reinstall the operating system and now I can not add your impressions.

  They have their No....

  > Reinstall the operating system and now I can not add your impressions.
  Stand by. You have reinstalled OS using original recovery image?

• ICloud photo library - double images and memory iPhone 5 c problem

  Hello

  After months of deliberation, I decided to convert my Aperture on Mac in photo library and link the family three iPads and my iPhone to iCloud photos. I made sure all software updates have been installed on all devices, including the Mac. After 22 days of continuous download, I have now all the pictures in the clouds!

  However I have 2 problems. My 30 k + original images expanded to 40 k + with thousands of duplicates and my iPhone 5 c memory (8 GB - what a mistake!) is now full and I cannot take photos more or update applications on it. I guess that duplicates are albums on iPads.

  Before I converted, I checked and the documentation stated that the Photos would be recognition of duplicates and not replicate in the cloud. I also checked the box to optimize the images on my iPad and iPhone not realizing that even with the optimization of the paltry memory on the 5 c would be totally inadequate - the iPad is very good.

  Now I have more documented and install PhotoSweeper on the Mac seems a possible solution to the problem in double - the alternative is to go through each image!

  Re the problem of the iPhone, the only solution I see is to stop the iCloud photo library on the phone and then remove the images on the phone. Who will free the memory, and I will then be able to take pictures I have to take pictures by other means. It's not ideal for a functioning flawlessly, but when my contract is up this summer the next phone will be a greater amount of memory and hope it will be seamless!

  Any advice please before going further?

  Photo Sweeper is a good package and works well and is course - so are duplicate Annihilator for Photos and PowerPhotos

  You could try turning off ICPL on the small phone, cleaning of duplicates and leaving all s = complete uploads and downloads and stabilize and they new the on with photos on the iPhone - optimized it can handle then - worth a try

  LN

• Laptop Pavilion g6 with end of module startup and the memory + beep

  My laptop is a g6-1c58dx. I have problems with my cooling fan, so I went on the disassembly to enter the fan to clean the fan of was (?). So far so good. I think I'll have some kind of problem put the barrette back now however. I'm not positive on what side of the bar of memory has been upward when I took it out and I forgot which of the two players, is in. However, I tried with both parties in the two slots and still no dice. Whenever I hit the power button, the capslock key, the screen does not light and I get 3 long beeps followed two short beeps. I tried to find a good image of the memory card in the laptop somewhere online to see if I'm doing something wrong, but I couldn't find a pretty good. I went digging in the part of support rescources mentioned here have a few videos and others which could be related to my problem, but I could not find g6, only g1, g2 and g3. So, it's very late here. I worked on this all night. Could someone tell me what I need to do to stop the maddness?

  Here it is:

  https://www.YouTube.com/watch?v=_1I0kahnC4I

  and

  https://www.YouTube.com/watch?v=VLXe2LJXpBs

• How can I get the address of the memory of a table?

  Hi all

  Please bear with me, as this can be confusing. Let me know if you have any questions.

  I have a CCD of Hamamatsu and an external DLL that comes with it that I use. I call the "DcamCapture" function - this sends the capture command to the CCD.

  Its documentation:

  "BOOL DcamCapture (LPVOID pImageBuff, INT nBuffSize)

  [Summary]
  Begins to capture an image of the device.

  [Arguments]
  pImageBuff specifies the start address of the buffer where the image data is
  to be stored.

  nBuffSize specifies the size of the buffer (number of bytes).

  [Note]
  (1) this function emits an instruction to begin to capture the image. Since the image
  capture is not complete even when the function is completed, use the DcamWait

  function to check if the image capture is complete. »

  The "BOLD" is my own. So after that I called this function, I have to call DcamWait. The problem is, from this point, labview has already written the pImageBuff to its indicator variable - in fact, he wrote immediately after the return of this function. But before that data has even written to memory! So I go out exactly what I put in - an empty array.

  In C++, this isn't a problem. What they do in their code for the example is call DcamCapture, DcamWait in a loop, and then dereference the pointer pImageBuff once all this is done.

  I don't know how to dereference the pointer of table in Labview.

  So I have to, as a clumsy hack, call DcamCapture TWICE. I first call DcamCapture, then DcamWait, then DcamCapture again - this time, I use the FCM to dereference the pointer, pImageBuff, which has the correct data (now).

  -How can I get the location of the memory of the pImageBuff? And then, how can I access it?

  Thanks for your help. I called NOR and they 'think' about my problem - I would see if anyone here can come up with a solution.

  You can do this by using the functions of the memory manager of LabVIEW, you call by setting the name of the library to 'LabVIEW' in the call library function node.  The functions you need are DSNewPtr, MoveBlock (which in fact copy of data) and DSDisposePtr.  There are short documents on these functions using LabVIEW.  You need to call DSNewPtr to allocate the memory, switch to the DCamCapture, loop on DCamWait, use MoveBlock to copy this pointer data in a table that manages LabVIEW and finally free the pointer.  Here is an example of a similar sequence: http://forums.ni.com/t5/LabVIEW/array-pointer-from-dll/m-p/1217453#M519958.

• Connected by USB PS 7510: access to the memory card?

  For the past year, I had my PS 7510 connected wireless to my home LAN. The memory card appears on my computer (Mac OS X) in my list of devices, and I could access the images that I had scanned it. Changes of houshold allowed me to change my setup and I chose to disable the wireless function and use the USB to connect to the printer. All functions work well, though the memory card is not visible or accessible from any of my applications. Access to the computer is the card memory limited to wireless connectivity? Best regards, Brian

  Thanks for your effort.

  I had already applied the way you suggested in your last post, but I've been through once again, deleting and adding the printer. No immediate joy. Then I took a look at the data in the system and I was wondering why I couldn't see even the card on the printer on the USB port. I was wondering, ad did what I should have done from the outset - I removed the card and reinserted and then he appearred in my list of device as you wish. I feel a little stupid for not having done this before.

  Once again, thank you for the effort and support. I'll look to mark the post as solved.

  Brian

• Office Tower Inspiron 530, where is the memory slot?

  where is the memory slot?

  Do you mean the connector for installing more RAM (computer case): http://support.dell.com/support/edocs/systems/inspd530/en/OM/HTML/parts.htm#wp1580857 depending on what variety of Inspiron 530 you have, you can have 4 connectors (items 3, 4, 5, 6, & in this image) or only 2 (points 3 and 4 in this picture)

  Or a player where you insert devices such as card SD cards? http://support.Dell.com/support/eDOCS/systems/inspd530/en/OM/HTML/settin58.jpg

• Move photos to the memory card

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi mbelva,

  Moving images from your hard drive to a memory card or vice versa is no different to move files from one folder to another. Insert your memory card into your card reader and then open Windows Explorer. Make sure that your memory card is recognized by Windows. If it has you should see it in Windows Explorer in the left pane under computer. Then locate the pictures you want to move, and either drag them from the folder on your hard drive to your card or cut and paste. Remove the memory card when you are finished.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• The memory could not be written

  Hello. I have two PCs running ask for 3d stuff. A machine is an i7, an AMD. We have a N-vidia a ATI graphics card. We have 16G RAM, the other 8.
  We run to W7 pro the other W7 Home premium. What they have in common, is that they have both run Posers Firefly, FFR renderer on the network. Either you let ask rendered your image or you ask the other machine to do. Anyway. I got this program for a while that an everything worked smoothly until a Saturday two weeks ago. Just after the last batch of updates. The two machine comes with an application when rendering error. "The memory could not be written.
  Changes in system only facts during this period was the updates so I am convinced that something touched something and so on.
  It is said expressly: "FFRender64.exe - Application error the instruction at 0x402a9546 referenced memory at 0x000001a0. the memory could not be written. Click OK to terminate the program"
  Could someone please find something? and don't forget TWO machines, brands of TWO GPU CPU TWO brands, TWO brands of MB and still the same problem!
  Dick Andersson

  Hello

  To help you with your query, we'd like to know what version of Windows are you using?

  Please click on this link to download and run the Hardware Troubleshooter.

  If the troubleshooter does not solve the problem, please follow these methods below:

  Method 1: Perform the clean boot

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in Windows.

  Please click on this link to learn how to perform the clean boot.

  Note: Please see: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Method 2: Run the System File Checker

  Make sure you backup your personal files all exists before running the auditor of the filesystem in the event of HARD disk failure.

  1. Type cmd in the charm of the research.
  2. Prompt, right click then click on run as administrator.
  3. Copy and paste the following command in your command-line prompt: sfc / scannow
  4. Press enter to execute the command. It may take a few minutes to complete. If you find 100% full verification, click X to close the command prompt.
  5. Restart the PC for the changes to take effect.

  Let us know the result.

• QNetworkAccessManager limiting the memory usage when no head

  I have a long application works without head that downloads files from 6 MB upwards on a web server. Now using QNetworkAccessManager to view the file, I see the memory usage, pull up and soon to exceed the limit of 3 MB.

  The QNetworkAccessManager then suffers bad allocations and crashes.

  I was hoping would be sort of the QNetworkAccessManager chunk the data of the file on the disk and keep low memory footprint, but it seems he is trying to remove all of the file.

  All means to limit or control the behavior of the QNetworkAccessManager?

  See you soon

  Paul.

  Hello.

  We started an internal investigation to verify the QNetworkAccessManager implementation.  A suggestion to try next was to try using libcurl to perform the download of files.