Use of IE with Windows and active Internet the FMS server 8.1 requires a username / password

Similar Questions

• After the reinstallation of Vista (32 bit) I'm done with Windows and most of the stuff on the disk 1 (c), but with stuff on the disk 2 (d).

  original title: after reinstallation of Vista (32 bit), I found myself with Windows and most of the stuff on the disk 1 (c), but with stuff on the disk 2 (d). It's hard to backup.

  I wish all the disk 0, which is 250 GB, leaving the 1 free 500 GB disc to have been the repository of backup and archiving of others.  But I don't want to have to reinstall everything.  I couldn't move bootmgr, BOOTSECT. BAK and 'boot' folder on the disk 1 (c) by somehow the system partition?  Then there would be no OS stuff on disk 0 (D :); back, but better than mixed.)  What happens if I disconnect physically the smallest disk, Startup Repair will make the disc with Windows boot and system partitions? Thank you.

  Hi OldScientist,

  Before performing these steps, it is recommended to make a backup of your important data.

  Step 1: Mark Disk 1 (C) as active partition, then launch Startup Repair

  Follow the steps mentioned in the link below to mark C as active partition

  Mark a partition as active

  http://Windows.Microsoft.com/en-us/Windows-Vista/mark-a-partition-as-active

  Follow the steps mentioned in the link below to launch the Startup Repair tool

  How to use Startup Repair?

  If the problem persists,

  Step 2: Follow the steps mentioned in the article below to rebuild the BCD (Boot Configuration data)

   

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information".

  http://support.Microsoft.com/kb/927391

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• using a pc with windows 7 pro, in the print LR 6 cc module I'm not able to find the button configuration page on the left side of the bottom of the screen, where is it?

  Running a pc with windows 7 pro, in LR 6 CC in the print module.  In the lower left corner of the screen, there is only a 'page setup' button and it heading me information of "printer setup".   Must have 2 buttons in the lower left corner of the screen... "the installation and configuration of printing the page program" cannot access information 'page layout'... need some help here.

  Tom Glendenning

  < < edited by moderator > >

  Under Windows, there is only one button.

  It's Mac OS which has 2 buttons.

  What exactly do you miss?

• URL redirects can be configured with XE, and what is the HTTP Server

  I wish I could the URL redirects. I'm under XE with Application Express 2.1.0.00.39.
  
  I want to be able to have a URL like www.schoolwebsite.com and when the user presses on it - have redirect to the page of the Apex for the application. I thought I had to use a redirect in the configuration file HTTP and that XE used Oracle_HTTP and I have set up this way.
  
  But I can't find an Apache Directory.
  
  1. what HTTP server is used with XE and Application Express 2.1.0.00.39?
  2. can I set up for this type of redirection?
  3. do I need to install a HTTP server for this?
  
  Thank you
  Stephen

  If you want to achieve without a separate http server, follow this discussion:
  Re: Default Page

  Kind regards
  ~ Dietmar.

• Using Acrobat XI with IE11 and Win7; I can't the acrobat toolbar. Watch modules Manager he's here and activated, but the toolbar is not there. And when I use right click and click on convert to Adobe pdf format, nothing happens.

  Using Acrobat XI with IE11 and Win7; I can't the acrobat toolbar. Watch modules Manager he's here and activated, but the toolbar is not there. And when I use right click and click on convert to Adobe pdf format, nothing happens.

  Can anyone help?

  Hi Richard,

  1. start Internet Explorer.

  2. Select Tools > Internet Options, and then click the Advanced tab.

  3. check if "enable third-party browser extensions (requires restart)" and click OK.

  4. close all Internet Explorer Windows.

  5 restart Internet Explorer.

  Let us know how it goes.

  You can also check out the following link and see.

  Quick fix | See a PDF on the Web

  Concerning

  Sukrit diallo

• I use a PC with Windows 10 and Lightroom 6.1.1. When in the develop Module of Lightroom freezes when I try to edit the next picture after correcting the first.

  I use a PC with Windows 10 and Lightroom 6.1.1.  As soon as I want to move from a photo retouched to another in the develop Module, Lightroom freezes.  Can you help me?

  Hi Petra,

  > Try disabling the option of GPU in the Lightroom > edit > Preferences > Performance tab

  > Update your graphics card driver

  Hope this helps

  ~ Assani

• I got Photoshop CS2 before on my computer, but after that I formatted this last day, I can't download the programs again. I use Vista on my computer and my Internet is also open.

  Hello. I have a problem downloading the photoshop cs2 free on the Adobe site to my PC... I got 2 before Photoshop on my computer, but after that I formatted this last day, I can't download the programs again. I use Vista on my computer and my Internet is also open and I ludovic Firefox. My firewall I also closed when I try to download the file, but the problem is the same. When I try to download the photoshop or other programs Adobe down your site (Adobe website) and cams out there a text saying: Firefox can not find server download.adobe.com. Check the address for typing errors, like ww.eksempel.dk instead of www.eksempel.dk if you can not load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the web. I also tried with Crome and Microsoft Internet but still the same problem and error text is displayed. Can someone help me? Please...

  Hi benjamina35117761,

  Please visit the following link;

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• The iexplore.exe program ceased to interact with Windows and was closed

  The version of iexplore.exe 9.0.8112.16447 program ceased to interact with Windows and was closed

  This happens from time to time only.

  Hello

  Follow these methods.

  Method 1: I suggest that scan you Chccker file system (CFS) on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2:  If Internet Explorer does not work, you can try to disable Internet Explorer and then enable the feature that is as good as the uninstall and put it back.

  Follow the steps below to do the same.

  To enable or disable the Internet Explorer, follow these steps:

  a. click the Start button, select Control Panel, click programsand then click Windows turn on or off features. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. uncheck Internet Explorer. Click OK and restart the computer.

  c. now follow the same steps to activate Internet Explorer by selecting the checkbox.

  Access the link for more information on the above steps to turn off or on the features of Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

• A call from someone who says they are with windows and there is a problem on my laptop anonomous

  I just got a phone call from a person saying they are with windows and there is a problem with my laptop. This happened to someone else and how is it possible to know what type of camera I use (e.g., laptop computer)? How can I check to see if someone else has access to my account?

  The game, June 5, 2014 19:29:39 + 0000, mslindatx wrote:

  I just got a phone call from a person saying they are with windows and there is a problem with my laptop. This happened to someone else and how is it possible to know what type of camera I use (e.g., laptop computer)? How can I check to see if someone else has access to my account?

  It's a scam and with all the names and phone numbers, one who has
  become very frequent lately. See
  http://www.troyhunt.com/2012/08/virus-scams-social-engineering-victims.html
  and
  http://www.howtogeek.com/176605/tell-your-relatives-no-Microsoft-wont-call-you-about-your-computer/
  and
  http://www.howtogeek.com/180514/the-%E2%80%9ctech-support%E2%80%9D-scammers-called-Htg-so-we-had-fun-with-them/

  In addition to their money get on your part to do anything of any value,
  If you leave them in your computer, who knows what they were doing or where
  What confidential information they stole.

  So if you have done so, I highly recommend that you do both of the following
  immediately:

  1 do a clean reinstall of Windows.

  2. change all of your passwords, especially banks or other
  financial sites.

• my trusty Palm 750 (at & t) used to synchronize with Windows 7, 64-bit.

  original title: Palm Treo 750 GSM Smartphone

  Looks like my trusty Palm 750 (at & t) used to synchronize with Windows 7, 64-bit.

  It is understandable and disappointing.

  Is there any kind of emulator-type of a solution to synchronize?

  I ask because I don't have a data plan and need the cable to maintain contacts and calendar on the terminal entrances.

  Thank you

  Mike

  Hello
  
  I suggest you contact your hotline and check if it helps.
  
  http://palmsupport.org/Palm-support
   
   

• The SystemSettings.exe version 6.2.9200.16384 program ceased to interact with Windows and was closed

  Original title: can someone please help me Dell can not... The SystemSettings.exe version 6.2.9200.16384 program ceased to interact with Windows and was closed.

  Here is what I get when I try to download the Dell digital program.  I also can't use it either on the site to check my phone and nobody at Dell know what to do...

  The SystemSettings.exe version 6.2.9200.16384 program ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the control panel of the center of the Action.

  Process ID: cd8

  Start time: 01ce962cbf318c8a

  The termination time: 10

  Application path: C:\Windows\ImmersiveControlPanel\SystemSettings.exe

  Report ID: f1125230-0221-11e3-be6b-84a6c8d081a7

  Failed package name: windows.immersivecontrolpanel_6.2.0.0_neutral_neutral_cw5n1h2txyewy

  Flaws in the application related to a package ID: microsoft.windows.immersivecontrolpanel

   

   

  my laptop did not work properly since I got back from dell.  I also can't do a refresh of ore a reinstall then please to do not recommend do not.  I tried a clean to stall the disc, nothing... Help me please.

  Malinda

  Malinda,

  Try to create a media disc by following the steps in http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media

  If the problem persists, try to perform a refresh and check if that helps.

  Note: The applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

  Let us know the results.

• Whenever I start my computer with Windows XP, I get the message "it is necessary to restart your computer. If I select 'YES', the system restarts and I get the same message.

  Original title: "RESTART YOUR COMPUTER IS REQUIRED" MESSAGE LOOP

  Whenever I start my computer with Windows XP, I get the message "it is necessary to restart your computer.  If I select 'YES', the system restarts and I get the same message.  Always shut up if I keep you select 'YES '.  I can work around the problem by choosing 'NO '.  How can I avoid that this message that appears constantly when I start the computer?

  http://forums.techarena.in/Windows-Update/1095335.htm

  read the above and follow the tips on adobe updater and maybe this will help.

  If this is not the case after return and include information about your machine, svc pk and IE #.

• The use of devices with Windows 8

  Hi all

  I saw many problems for people with questions about the use of Bluetooth with Windows 8 devices, especially after the upgrade.

  Take a look at this document, which covers:

  I hope that this document provides assistance.

  Good luck!

• I used to work with Interbase and Firebird and used databases the keyword "domain". I am now switchig to Oracle as a primary database and would like to find an alternative appropriate "domain" in Oracle, as it appears he does ' t taken in charge the stand

  I used to work with Interbase and Firebird and used databases the keyword "domain".

  I am now switchig to Oracle as a primary database and would like to find a suitable

  Variant of 'area' in Oracle such that it appears he does ' t support the standard SQL syntax.

  for example:

  Create the int2 smallint field;

  create domain id2 int2 default 0 not NULL; / * for the primary key * /.

  create domain rel2 int2 default 0 not NULL; / * foreign key * /.

  I tried a couple of approaches to achieve this "area" is:

  1. create synonym - cannot be used with the basic types;

  2. create the type - type of work, but the implementation is rather clumsy

  and can be costly in terms of performance.

  Is there something else to Oracle that can emulate the feature "domain"?

  Thanks in advence, I got really approciate any help on this.

  Alex.

  Your best approximation is CREATE TYPE, but their is nothing of what is a 100% adjustment.

  For example, if you create a domain with a check constraint you need to implement than separately on each table.

• I am trying to update Windows and I get the 0x080072F8F error code

  I'm trying to update Windows and I get the 0x80072F8F error code.  I tried to set the time, but that did not help.  I unchecked the revocation of the certificate and that did not help.  I can't go beyond a step at the entrance to .dll.  The one on the list has worked but when I tried as wintrust.dll he asks me what program to use to open this and others.  I even downloaded and bought RegCurePro, but which is not made and will ask for my money back because he did what he was supposed to.  Can I PLEASE get help on this?

  How many copies of Windows that you downloaded?

  First of all, I would like to inform you that only one copy of Windows can be installed and activated on a single computer.

  Follow the steps below to solve the problem;

  
  Method 1: Verify that your Internet connection is working

  This method is rated: moderately easy.

  To run this method, follow these steps:

  (a) click Start and then click Help and Support.
  (b) in the search help box or in the search online help box, type troubleshoot network and Internet connection problems, and then click Search Help.
  (c) in the list of topics, click on solve the network and Internet connection problems.
  (d) click the link that best describes the problem you are experiencing.
  (e) follow the suggestions to solve the problem you are experiencing.
  (f) when you are done, follow the steps in method B to reactivate Windows 7.

  If this method does not work for you, go to method 2.

  
  Method 2: Activate Windows 7 using the automated telephone system

  This method is rated: easy.

  To run this method, follow these steps:

  (a) click Start, and then click computer.
  (b) click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation section.
  (c) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (d) click on show me other ways to activate.
  (e) click on use the automated telephone and then follow the instructions that are provided.

  
  Method 3:

  Reset your TCP/IP stack

  (a) click Start

  (b) type in the box search command

  (c) right click command and select run as administrator

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset