Use of Microsoft Bluetooth

Similar Questions

• BlackBerry Smartphones Can I use a Microsoft Bluetooth mobile keyboard 5000 with my blackberry bold 9900 phone?

  I was wondering if I can use a keyboard microsoft bluetooth mobile keyboard 5000 with my Blackberry Bold 9900 phone?  When I go to the pair, the phone finds the Microsoft keyboard, but he asks me a key digital authentication, then for an alphanumeric password.

  Keyboard manual says that if you are asked an authentication key, let the program create, but my Blackberry does not create anything, he's looking for the authentication key.

  It is a company phone.  Should I contact my COMPUTER tech support to see if they can shed some light on this or did someone here knows what I can do to remedy this?

  Or am I wrong in assuming that I can use the mobile keyboard with Blackberry?

  Thanks in advance for your help.

  Jon

  That the keyboard does not support the Bluetooth HID profile.  BlackBerry requires Bluetooth SPP profile.

• Microsoft Bluetooth Notebook Mouse 5000 question

  I've been using the Microsoft Bluetooth Notebook Mouse 5000 with my laptop Sony VAIO under Vista Home Premium for almost 6 months. A few days earlier, I was transferring a file from my laptop to my phone via bluetooth while the mouse is connected. During this operation, the cursor of the mouse began to move eradically in the branch on which I show the mouse. He was slow and jerky by following my movements. I had noticed this behavior in previous proceedings, all in my phone and pc were in communication via bluetooth. To fix this issue on all other occasions, I would be simply to disable the bluetooth mouse that had completed the transfer and then turn it back on and it will behave as expected. On this occasion I hit by mistake the detectable button on the bottom of the mouse instead of the power switch. The mouse came into discoverable mode, indicated by the alternating flashes red and green battery light, and the cursor no longer responds. Then, I turned off the mouse and turned back, waiting for his execution to return to normal. However, he was always insensitive. I tried to add the mouse using the bluetooth devices Wizard, but as Research Assistant for the devices mouse is not discovered, although it is in discovery mode. So, I fixed my drivers bluetooth supplied with the laptop, but no change. Interestingly, in the device under the mouse Manager, here's my touchpad and a hid-compliant mouse, if I don't have another mouse connected. When I turn off my bluetooth power, this device disappears from Device Manager and reappears when the power is turned back on, despite the bluetooth mouse not lit. I can still communicate with my phone via bluetooth, but not the mouse. Microsoft sent me a new mouse, but I do not expect this to solve the problem, because I think it's a software problem. Someone at - it ideas? If you would like more information, I can certainly do...

  I had the same problem the year last on a Dell XT; Ms sent me a new mouse BT 5000 and still had the issue. I gave up and updates several months later and unknown, the machine worked again. Today, I tried to use it on another laptop and worked well. I went back to my XT and the red LED flashing (detection mode) is back. Now, it will not pair with a PC. I think the problem is with the mouse it self. He becomes confused and stock in a mode that is not really "detectable" or bc no BT device cannot be found. Remove the water for long periods only resets NOT to be. I finally make it work but don't know what not solved the problem but that's what I did: disconnected (off) BT on PC, which is held to discover button mouse while turning power off, battery removed from the mouse. BT on PC has and began to search for devices of BT, replaced batt in mouse and turned on, you press on discover button mouse (PC is always looking for a device), and he appeared! I chose it and the red light stopped flashing and works well.

  Note that I tried everything back several months ago on the different versions of hosts BT running on XP pro with no luck. Now I use Win7 and this procedure was performed on a Win7 OS PC which seems to be more stable. Hope this helps someone. Sorry I could not be more specific about what is perhaps the question; I still don't know! :)

• Microsoft Bluetooth Mobile Keyboard 6000 stops working

  I use a Microsoft Bluetooth Mobile Keyboard 6000 and it connects very well and I can type for a minute or two, and then it stops just work. I tried to uninstall and reboot several times, but it continues to be. All the drivers are up to date. Batteries are fine. Pleas advise because it is currently unusable.

  Hello

  If I understand correctly you are facing problems with breakdowns of response with you Microsoft's products, is this correct?

  Please follow the steps mentioned in the articles below and let me know if it helps.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  Connect a Bluetooth device that are neither require a TRANSCEIVER

  If you still face problems, please let me know.

  1. is the program specific question?

  2. are you having the same problem when you connect the keyboard to a different computer?

  3. what was the recent change in hardware or software performed on the computer before the question?

  I hope this helps.

• Since I use 'Microsoft Bluetooth Mobile Keyboard 6000' with separate numeric keypad, I can't use the ASCI codes.

  Original title: ASCI codes with separate numeric keypad.

  Hi all

  Since I use 'Microsoft Bluetooth Mobile Keyboard 6000' with separate numeric keypad I can't use codes ASCI. Y at - it software or setting, which allows to manage this?

  Thank you very much.

  Hello Stephen,

  I have another, better solution now (hint of a colleague): I changed the code of the NumLock key to the ALT key code (I need not the normal function of the NumLock key). Now, I can type ASCI codes with the keys on the keypad num only and it works :-).

  You can change codes for keys in the registry. Unfortunately, I have only a German description for this in Windows XP (http://www.computerhilfen.de/hilfen-5-80753-0.html). But I am sure, there will be English descriptions in the web as well.

  Best regards

• Microsoft Bluetooth Mouse with my Satellite A60-122 issue

  Hi there;
  I'm a new user in this forum and this is my situation:

  I bought a Microsoft IntelliMouse Explorer with a USB Bluetooth adapter. When I plug the Bluetooth adapter to one of my four USB ports, bluetooth connection seems fine. However, I can't work with my new mouse. I have try all this on a Mac computer and mouse everything goes perfectly. I have not yet installed the driver! I don't know what is happening. I had installed the driver several times and it seems OK. DC when I search the mouse over the icon of bluetooth device, I see him there. However, the mouse does not work and when I open again the icon of bluetooth device, I can't see the connection bluetooth mouse more.

  My question was already posted by Sorin11 (08.12.05), and I would like to know if today, hopefully there is a solution to this problem of bluetooth.

  Thank you
  Antonio

  Hello

  Well, the Satellite A60-122 has no Bluetooth. In this case, you will need to use the 3rd Bluetooth driver and the device.
  In addition, the Mac has a completely different operating system and you can not compare the two devices.
  Unfortunately, I can't give you a correct answer, why this problem occurs. You should check if you are using the correct drivers. You should especially drivers for Windows OS.
  In my opinion, you should ask the manufacturers of the ItelliMouse for the support.

• Toshiba Bluetooth Stack vs Microsoft Bluetooth Stack

  What Bluetooth stack is better and more reliable for Toshiba Qosmio G20-127, reviews Microsoft Bluetooth Stack (coming from XP Service Pack 2), or, the native of Toshiba Bluetooth Stack 4.00.23?

  Hello

  I can t give you an answer exactly. But I'm using the Toshiba Bluetooth stack and it works correctly. I put t have any problems.
  If you wish, you can check out this Toshiba Bluetooth info site:
  http://APS.toshiba-tro.de/Bluetooth/

  You will find many FAQ, news on Toshiba Bluetooth.

• Pavilion Envy 700-074: enumerator Microsoft Bluetooth Code 10

  I came across a problem with a yellow exclamation mark for Microsoft Bluetooth Device.  It shows an incomplete pilot.  I have read through the various errors and suggestions for other people on the forum, but it does not really my problem.  The first thing I did was uninstall the driver and the rebooth my computer, but the same error comes back and I can't find anything on the support page for my model.  The computer seems to work fine without this driver, but the exclamation point is indicating a problem.   Why I even checked my system is because my card reader quit working and I was trying to solve this problem when I discovered the error THE.  The card reader problem is always there as well.  For any help or suggestion would be appreciated.  I bought a card reader for the problem but I fear if something will follow other problems.

  NancyZ

  I think I solved my problem.  10.0.10586.0 driver version refers to a mouse, but my mouse was very well so when I went in my devices to see what was hooked and am completely down he showed that a fitbit attached as "One" with a question mark next to it.  When I went into the properties he had nothing and he indicated was not connected because it lacked drivers.  I think it was a hold during a previous fitbit that I had connected but no longer use.  I just deleted the "one" and then restarted my computer.  He did not come back and in my sysstems the Bluetooth enumerator THE not displayed with a yellow exclamation point.  So far, everything seems to work on my computer.  In regards to my card reader, it is only the card compact flash that he can't read, but other cards can be read very well, so unless something happens that I think I'm okay just by using a card reader.

• pouvez the archos 101 Tablet pair with microsoft bluetooth keyboard 6000?

  ARCHOS and microsoft 6000 bluetooth keyboard

  pouvez the archos 101 Tablet pair with microsoft bluetooth keyboard 6000? What is the genric pairing passkey?

  This forum is for feedback on the site of the Microsoft Answers forum. You must find a site support or support for your table or the keyboard forums. I am not able to access material support of Microsoft sites (for example, http://www.microsoft.com/hardware/en-us), but there is a video at http://www.youtube.com/watch?v=BSmOY4fFgEE that may be useful. even if the video is on a different tablet version, one of the speakers specifically refers to the Archos 101 and the Microsoft Bluetooth Keyboard 6000.

  Oh, wait, now, I finally got http://www.microsoft.com/hardware/en-us/support/troubleshooting, which has a link to "how to set up a Bluetooth keyboard?

• NEED TO DOWNLOAD THE VERSION OF THE MICROSOFT BLUETOOTH 6.0.6000.16398 ENUMERATOR DRIVER

  I can not send or receive files via bluetooth using my own hard drive... But if I change the hard drive and use my friends hard drive (WHICH IS THE SAME AS MINE because WHAT WE the TWO USE SAME DESIGN OF PORTABLE ' COMPAQ PRESARIO V3000") bluetooth icon automatically appears and I can send and receive files. A NOTICE AM MISSING VERSION of the ENUMERATOR DRIVER MICROSOFT BLUETOOTH 6.0.6000.16398... And I don't have the disk.

  Hi fredykiondo,

  I suggest you try the methods mentioned below and check if it helps.

  Method 1: Check the drivers and Bluetooth Support services.

  (a) click Start-> type services.msc in the search box, Services window will then open in the list for Bluetooth Support Service Control and double-click it. Ensure that the service is set to automatic forstartup type and started for the status.

  (b) ClickStart-> device manager type on the search box, Device Manager window opens for Bluetooth device check expand it and double click on the driver. Go todriver tab and click on put the driver update drivers. If still it is even trying to uninstall and reinstall the drivers in the same tab by uninstall option.

  Method 2: No detection system file checker (SFC).

  http://support.Microsoft.com/kb/929833

  Install all necessary software required for Bluetooth device work properly.

  Reference: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-45935-1&lc=en&dlc=en&cc=us&os=2093&product=1817059&sw_lang=&key=null&site=null

• Unable to connect Microsoft Bluetooth Mobile Keyboard 6000 to my PC laptop Toshiba M65-S8092

  I could not connect Microsoft Bluetooth Mobile Keyboard 6000 to my M65-S8092 PC Toshiba laptop.  The labtop does not recognize the keyboard or numeric keypad.  When the keyboard or pad is turned on initially a light solid green lights and the light flashes red and green.

  Hello

  1. are you able to connect other devices via Bluetooth from your computer?

  2. don't you make changes to the computer until the problem occurred?

  3. it connects to another Windows XP computer?

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Troubleshooting Wireless and Bluetooth problems.  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/keyboard/wireless-Bluetooth

  Method 3: If it's Windows XP Service Pack 2 then I suggest you to see link below and check if it helps.

  How to troubleshoot Bluetooth detection and connectivity problems in Windows XP Service Pack 2: http://support.microsoft.com/kb/883258

  For your reference: http://support.Microsoft.com/kb/952818

  Hope this information is useful.

• Impossible to associate Microsoft Bluetooth Mobile Keyboard 6000 with XP

  I can't pair my Microsoft Bluetooth Mobile Keyboard 6000 with my XP laptop. I am running 2002 Profession of XP SP 3. My laptop is able to find the device but it freezes on the screen of security configuration.

  When I select the matching device I get the security configuration screen. He seems to accept my security code that the numbers are replaced by dots when I type them however the hourglass disappears never and the remains of button "pair now ' gray. After a few minutes, it gives me a matching error message. Yes, I type the code correctly, I tried more than a dozen times now. I also noticed that the indicator light quites blinking ounces the safety of installation box.

  I read the thread "Unable to pair up with Microsoft Bluetooth Mobile Keyboard 6000 using Lenovo X 61 Tablet with office XP" and have not been able to find a solution. Please help I really want to it works.

  Hello Yinka_nut,

  Please see the related help forum thread.  Thank you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/unable-to-pair-with-Microsoft-Bluetooth-mobile/f65d6189-0c75-4EC4-9d0f-78cb550bc90c

• Keyboard and numeric keypad does not work (Microsoft Bluetooth Mobile Keyboard 6000)

  I have no problem 'successfully' matching the two devices.

  According to the Association, only one paired device provides actually entered in the computer.
  Learn type / using the volume keys on the keyboard works; the numeric keypad does not work
  OR by tapping the keypad works but the keyboard does not work.
  Sometimes the first device remains "locked", sometimes the second devices seem to start the first.
  What gives?
  I have had this problem since I bought the unit in mid-2010.  I quit trying to solve the problem so far because I now have a need for the numeric keypad.
  I am running Windows Vista Basic Home Edition on a Dell Inspiron 530.
  I use no other Bluetooth devices.
  My mouse is wireless (non-Bluetooth).
  My LAN is wireless (non-Bluetooth).
  Any help would be greatly appreciated!

  Hello

  Thanks for the reply.

  I suggest you to follow a few troubleshooting steps more and check if this helps you fix the problem on your computer.

  Method:

  You can try to check on another user account and see if the problem still persists.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Hope this information helps you.

• Microsoft Bluetooth Wireless Laser Mouse works, extremely, annoyingly slow after change of motherboard out sometimes.

  I have problems with my motherboards.  I installed originally a jury of six core AMD Asus but discovered that the sound circuit on the Board picked up the RF of six hearts.  So I changed it to a Biostar TA890FXE an AM3 Board with 4 PCIE slots.

  This map may contain 4 Pcie, but has only 2 16 x slots that are white in color for Crossfire.  The other 2 Pcie are for the slower cards.  I have my card installed in slot 1 PCIe 16 x

  Since I was a boxed version of Vista Ultimate 64 bit the replacement of the Board of Directors has gone well with without a hitch, except for this problem.  The darn wireless mouse keeps presenting a significant delay from time to time.

  I upgraded to the latest BIOS and also found that a USB Joystick was also causing problems until I uninstalled the ATI Radeon drivers several times.  I have uninstalled/reinstalled all drivers USB again and again.   I even upgraded from 8 GB to 16 GB of ram Corsair and the thing does not run any faster (except for loading video in an editor) than my Asus M4785M with 4 GB ram.

  At first, I figured the card Radeon 4650 diamond with 1 GB of ram, when I ran FSX I got frequent black screens between refreshes.   When the aircraft was in its window the mouse lag so I moved it into the box with the graphics.  I could move it very quickly from time to time but not always.  As soon as the mouse has crossed the border of the FSX menu in the aircraft selection menu, the LAG would begin.

  Strange however, I also have the Microsoft Bluetooth Entertainment 7000 keyboard and it has a built-in mouse pad.  So when I got the offset of the wireless mouse I found that the mouse pad, keyboard do not show it.  Of course, a lot of batteries have been tried.  I have also a key 3G modem and the thought that maybe the RF frequencies could interfere with the bluetooth transmitter, and yet the mouse KEYBOARD pad worked fine all the time!

  At a point of the USB ports on the front of my PC failed suddenly and I used the port in the back instead, as the 3 g modem suddenly was cut.  He started upward once again connected to the rear port, but he chose all of a sudden another 3G network, spend roaming, something that isn't supposed to

  occur.

  So it seems to be a USB problem.  I double checked the connectors on the front panel plugged into the motherboard header, but it was close.  I removed it and he exchanged with a rear slot spare USB cable I have no problems. I even swapped the transmitter Bluetooth of the rear USB ports in the front and vice versa, and these problems went away.

  Yet from time to time, there will be a sound of loading the disk heads and there will be a lag on the mouse and it flit on the screen itself.  I removed all the USB drivers and mouse drivers and drivers of keyboard without result, I then plugged a wired keyboard and mouse while the USB was plugged in and waited.  The wired keyboard had built in the trackball, so I couldn't move around as fast as Bluetooth, one mouse cursor and again, I got the mouse slows down from time to time.   Most of the time is when a noise was heard from the hard drive.   I turned off Superfetch to listen to the record and it made no difference.

  I left the PC running on its own after turning off any energy saving features and when I came back to it, I finally found that the keyboard was a lag now, too, I had to wait about 30 seconds for something to wake up until the keyboard is recognized.   It seems that it is the same problem that mouse, but at a later date.  I then re active features and screen saver and keyboard lag reduced significantly saving energy.

  Then, once, I got a huge amount of lag when Google open white paper screen, the mouse cursor wouldn't move at all for a long time or erratically.   In this case, I thought to 'pull' the wired keyboard and the trackball at the back of the card, and the problem immediately disappeared as if there were conflicts.

  However, this did not last long, and about an hour later, the mouse pointer lag appeared.  Don't forget this mouse worked fine for a year on an Asus card and withdraw it very well.

  My next attempt with the Bios, and it happened unexpectedly.  This motherboard has a utility to start Bios screen where I can put my own splash screen and no the Biostar on a difficult start.  So I did and all of a sudden all the problems cleared up!    It was as if something in the Bios was hung in, and then there is this whim of hard drive noise and once again, lag lag lag on my mouse.   With 16 GB of ram and 1 GB of video ram?  Just to not use the Aero's office, no sense at all to me.

  Tried to contact Biostar for 12 days now, no response.  Have the latest drivers for vista from windows for the keyboard of entertainment and mouse, service pack 2 for Vista and a 1 TB hard drive, 500 watt antec PSU, problem occurs with or without overclocking.

  Anyone?  Anyone?

  AMD Phenom 2 1090 t black edition 3.2Ghz

  HD4650 diamond! GB

  Corsair XMS3 DD3 x 4 1066 4 GB

  1 TB of Seagate SATA

  Antec 500W PSU Green

  Note: This map has a header of a CD rom, but also the DVD Sata PATA

  Latest

  I could no longer the transceiver Bluetooth 2.0 with the mouse and keyboard.  I went to a keyboard and a wired mouse again.   Then a few days later I decided that I would plug the transceiver Bluetooth 3.0.  This time it installed fine even if I had uninstalled the Intellipoint software.   I went then to the receiver Bluetooth 2.0 and it didn't work anymore.  I did a reboot between the two, and suddenly I saw a Microsoft update will appear at the bottom right of my screen.  I left it to update, and then he said that I could connect other bluetooth devices other than my keyboard of entertainment game.

  Well, this is not true at all, for the entertainment keyboard transceiver pairs automatically.    Yet, this message appeared.  When I went into the control panel to verify the situation once again, I found that there is no Bluetooth icon.   From what I've read on other Vista users using a transmitter of 3rd Bluetooth part, it seems that the Bluetooth stack has disappeared because I mixed the two Microsoft Bluetooth transceivers.    Something else occurred as well, it reminded me of moments where I would install a new installation of Win98 and some drivers as the main card drivers were not yet installed.  He will have to restart the system and over and over again for each driver be seen, and if we were out of sequence, should be made to remove and start over again until all have been installed.  In this case, it seems to be the same kind of priority when it comes to the way in which the Bluetooth drivers are installed.  When I removed the Bluetooth 2.0 transmitter/receiver and replaced by unity Bluetooth 3.0, I seem to have rid one of these priorities, let the program update that must have been stuck in the pile of pilots, how the keyboard and the mouse works perfectly now.

  With 3 wireless transmitter that is I can no longer use the Bluetooth 2.0, one all the more, I plugged it in different USB ports and we saw him, but it was not enough to cause any installer to appear.   It's as if they are reticulate together now, and I can no longer use the add a device feature.   Even if I add the second transmitter/receiver, it is simply ignored.

  Since then, right now I have no need of an additional feature and the keyboard works very well, I'll keep this configuration until I have to reinstall the motherboard still when I start then a clean Vista install.  Unfortunately the new motherboard that I received does not work as I had hoped it would be, not that it would affect the situation above, that's simply not what I was told it was, and I plan to return it the manufacturer once more.

• Microsoft Bluetooth Notebook Mouse 5000 installation error: "problem installing the driver for the device software - file to install the driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or la

  Original title: Microsoft Bluetooth Notebook Mouse 5000 install problem

  I have a LG S1 Pro Express dual computer with vista sp2. My Bluetooth Notebook mouse 5000 can be coupled to my computer, but after pairing, it will say "Device Bluetooth HID - ready to use" and "unidentified - device failed. It then opens a window saying "problem of installing the software driver for the device - driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or later. »

  I checked some things here and read about intellipoint 7.x and installed but it still does not work. This used to work before mouse

  Hello
   
   
  The drivers that you try to install seems to be corrupted. Let us fisrt remove all traces of the software driver for this device in the Device Manager and then install the drivers from the manufacturer's Web site.
   
  Step 1.
  You can uninstall the audio drivers completely from the Device Manager and re-install from the manufacturer's Web site.
  I would also recommend to check if there are Windows updates for this device.
   
  Step 2.
  Here is the link to download the latest drivers.
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK
   
  Select the type of product like "Mouse" and select the product as "Notebook Optical Mouse" and your version of operating system and the language of the operating system.
   
  This page will direct you to a link to download the IntelliPoint software, which is the software of the mouse.
   
  For more information see the links below.
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
   
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.