use of the extended dialogue

Similar Questions

• The document has been changed since its creation and use of the extended functionality is no longer available

  I have Adobe Acrobat Reader DC 2015.016.20039 on my system. I filled a form using Foxit Reader. When I tried to open the form with Adobe Acrobat Reader DC I received the error "the document enabled extended in Adobe Acrobat Reader DC features. The document has been changed since its creation and use of the extended functionality is no longer available. Please contact the author for the original version of this document.

  I tried other PDF programs, no problem at the opening of this form.

  

  Function "Activation reader" comes from the original shape, and it's essentially a digital signature. It is specific for the free product of Viewer PDF by Adobe (aka Adobe (Acrobat) Reader).

  The problem is that only Adobe products are able to (re) make these documents without breaking the seal of the digital signature.

  So, what happened in your case is the Foxit Viewer broke the seal during the recording of back and what's. Using Acrobat, you can save a copy of the form, and then continue will fill. Otherwise, you will be better off to start over, but stay with viewers Adobe PDF all the time, working with the form, or with a different Viewer, once again all the time you work with the shape.

  BTW, player XI and most recent no. have more need of extended for more rights blocked by previous versions of Reader. This is not enough in this case; only, it would be useful for the sender of the form.

  Update (after rereading of the original message): if it's just for viewing or print the form, you can ignore this message. You can also try to save just, you have a version of player who no longer has the rights extended (at your risk).

  I hope this can help.

• Impossible to use the extended battery T420 extension

  It is quite disconcerting to have the laptop stop and be empty when the battery life indicator said there is more than 6 hours of life left.

  My T420 has a senior 55 + and 27 ++ long battery life.  If the main battery is used to power, when the main battery reaches 0%, it will fail to pass the long battery life and die.  It's not only to stop, it will stop.  Windows don't like this.  If the computer is using the extended battery for power, it can switch successfully to the main battery when the battery reaches 0%.

  There seems to be no way 'approved' to force the first laptop using the extended battery.  I got this laptop a few weeks, but in my experimentation, the laptop uses preferably the battery with the lowest percentage of all.

  For normal use, long battery life load profile I programmed to stop at 95%, this will get the laptop started on right stack when the two are connected, but not help if I'm out and on the use of the main battery and want to extend by adding the long battery life.

  The only method I found to force the laptop to use the battery when the main battery is low-capacity must simply remove the main battery.  Of course, to do this, I have to either stop the laptop or the put it hibernates in.  Then, remove the main battery and attach the long battery life.  Reboot the laptop.  So far, I have no problems with this method. The laptop is perfectly happy with just 27 ++ battery attached.  But if I'm going to pass the batteries, I might as well have an extra 55 ++ lying around and waive the 27 ++.

  Would be nice if Lenovo could provide instructions or a software patch that would allow me to tell the laptop to use preferentially the extended battery as soon as it is available.

  The way the system is designed, it's that you won't always unload the 2nd battery first, not the main battery. If this is not the case, check the switch on the 2nd battery. Make sure it is in the position "on / green.

• window appears on the extended screen, but the screen isn't there anymore so can't get to the window (2nd screen on laptop is only when it is connected to the desktop)

  Hi... interesting problem. I use my laptop computer on a desk with a second screen and moving.

  The last time I was using my laptop on the desk, I brought an application (Quicken) on the second screen and now when I start it up it displays on-screen extended even if I use the standalone laptop. I can't demand because it appears in the second screen and I can't get it back to the main screen. I even rebooted and it seems to 'remember' where is was the last time.

  Any thoughts on how to get it back (I know I can reconnect the second screen and move it back, but what about the time when I'm not near my office and want to access an application that was last used on the extended screen.)

  Argh...

  Thanks for your thoughts, I assume that there is a simple key sequence to make it visible on the main screen once I can't find it anywhere.

  Kind regards
  Lex Gitter

  Very late reply, I have the same problem and I solve it hovering over the window you want in the taskbar when the preview window displays a right-click on it.  Select optimize.  The window will appear on your screen.  No, you can enter the window and its size down, it stays on the current view

• N300 wireless Extender - using the Extender Network and the primary network

  Is it possible to use the wireless N300 extender only in areas where it is needed and the main network elsewhere?

  I want to be able to use to boost the signal to a smart TV via an ethernet cable, but want to use my main network in the rest of the House where I can get faster speeds.

  At the moment he seems to want to connect to all devices in the House.

  Hello elies

  If you your extensor different SSID name of your primary network, you can decided which devices connect to the Extender and those which connect to the main network.

  DarrenM

• Is legal to use "slmgr-rearm" extend using period in Windows 7 Ultimate & may I re-install Win 7 and use it for 30 days after the expiration date (29 days)?

  Hello
  I live in Iran.
  Here access to the original windows is not easy.
  I have ultimate edition (eternity) win 7.
  He let me to use during 30 days three times use "slmgr-rearm" to extend the trial period.
  Hereby, I can use and update.
  I have two questions.
  1. is legal to use "slmgr-rearm" extend with period?
  2-may I have reinstall win 7 and use it for 30 days after the expiration date (29 days)?

  with speciall thank you

  original title: Reinstall windows 7 ultimate

  According to the software Microsoft Windows 7 license, you must activate Windows 7 within 30 days of installation.  You are not allowed to circumvent or bypass the product activation.  After 30 days, you must enter a genuine Windows 7 product key for the edition you have installed, or remove Windows 7 by reformatting the hard drive, on which it is installed.

  In addition, you must respect Export Basics.

• Try to find the extended ICA if I use a graph on a t shirt, anyone know?

  Try to find the extended ICA if I use a graph on a t shirt, anyone know?

  Hello

  In the FAQ - Adobe Stock helps | Frequently asked questions

  Adobe Stock offers licenses allowing licensees to sell products or services based on an image?

  At the moment, Adobe Stock only provides standard licenses, allowing the licensee to use the images only for illustration purposes.

  Licenses are available via Fotolia - sizes and licenses

  ~ David

• Qosmio G30: How to turn on the extended desktop?

  It is possible to extend the desktop on the screen of the laptop and and external monitor when connected to an external monitor? I see in the manual that he talks with the "simultaneous" external display and the monitor to the laptop, but I need her to be not only "reproduced" and "extended" on both monitors for both monitors.

  In addition, these two monitors can operate with different resolutions (for example, 1280 x 1024 on the resolution of the laptop standard and external)?

  It is also possible to drive two external monitors of the single monitor out (I do not, but thought I would ask)?

  Thank you

  Phil

  Hello

  Of course, it should be possible to activate the extended desktop.
  Go to the display properties. Then, choose the number of Monitor 2 and choose the option to extend my desktop on this monitor
  It is also possible to use different resolutions.

• M300: Don't forget the extended desktop settings

  I use my M300 with a monitor and an extended desktop (i.e. different images on both monitors). I also have the external monitor put in place for a higher resolution than the lcd (and on the left of the LCD not allowed).

  However, I have to redo the settings everytime I connect. Is there a way to get the graphical utility to remember the configuration (and even to assign to the left button of the keyboard hardware)?

  Hello

  As much as I know the laptop don't forget last configuration, and if you use the extend my Windows desktop on this monitor, it may happen that the application window will not be displayed on LCD laptop but on extended monitor you will not be able to see in this case.

  I spend every time as you and it takes just 30 seconds and I can live with it. Just a question: how to connect external monitors (directly to the laptop or docking station)?

• Signal low iPhone in the use of the battery (6 apps with weak signal)

  Hello world

  I bought a second hand Iphone, it works fine but the battery runs out quickly when I use it (especially on safari). In the use of the battery, I see always weak signal under the apps and always under phone, even though I have 4/5 bar. I have yet found a solution...

  https://drive.Google.com/file/d/0B0aW-K-0VfulQW1LVVJCVHc0OW8/view?USP=sharing (here's a screenshot)

  Thank you in advance, I hope that your answers will help me.

  Hi luca9903,

  I see you are a new user here in the Apple Support communities - welcome! I hope we find you often contributing in the future.

  If you have short battery life when you are using your iPhone, you can use the information on this page to help extend - Batteries - maximize Performance - Apple

  Thank you for using communities of Apple Support.

  Sincerely.

• Disable the extended FIFO FPGA target during execution

  Hello

  I use a FIFO extended target in my FPGA to constantly calculate the derivative of a measured value (dB/dt). Thus the FIFO stores all values during time dt. This means dt determines the number of items in the FIFO and dB is determined by the actual value less the oldest value in the FIFO. It works well when I initialize with the code in figure InitFIFO.

  But the FIFO of compensation is not possible (see figure clearFIFO). In the while loop if "reset dB" is false, as the new value of B is written on the FIFO, then the oldest value is read from, for the number of items in the FIFO remain constant. To change dt during execution, I need to clear the FIFO and initialize it with a new length (number of items). I tried the next loop, but it does not work. The FIFO does not initilized with the elements. The length is zero and the loop counter for (#deltaB Length2) is 0.

  What I am doing wrong? Is there a better way to erase a FIFO during execution in the FPGA? I'm now stuck for 2 days with this problem and looking forward to any idea or suggestion.

  Thank you very much. Best regards

  Andy

  Hej,

  Thank you for your response. You were correct, that deltab FIFO length was 0 because the defalt value was zero. The problem is that in my host vi on the RT system I put DeltaB FIFO length in a loop of high priority and as you can see when I restart the FPGA, DeltaB FIFO length has a valid value (the code in figure 1 works well with a local variable of DeltaB FIFO length in the FPGA). But the variable to set the variable "reset dB" is under the control of the loop of low priority of the host vi. And there, I had an entry DeltaB FIFO length unwired.

  So, I learned that a control FPGA read/write unwired sends a '0' or resets the variable to its default value in the FPGA. I assumed that nothing is transferred and the last variable is retained if you let a control read/write unwired. Now, I learned of this stupid error!

  Thanks a lot again!

  Andy

• I get the Extended player Fatal Error Message every time my laptop boots to the top and I have no idea why

  I have no idea where this fatal of the extended drive error message. I don't play the games on my laptop, but my wife does in his user ID. We are both this error under our separate message ID. We don't remember to delete all programs, but when I try to install Extended Player it tells me that a critical file is missing. I tried using the Microsoft Cleanup utility, but the extended player does not appear on the list. I don't know where to go from here. Can I get help please?

  Hi Justamurray,

  1. How have you tried to install the extended player?

  2. did you of recent changes on the computer?

  3. What is the version of Windows installed on the computer?

  I suggest that you check and uninstall if you have the extended player program installed on the computer using the control panel.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Note: The link above is also applicable to the operating systems Windows 7.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion 14 use of the N-202AX games

  Is HP Pavilion 14 N-202AX for the games? Why does the exhaust part heat when I play games? Thank you

  Hi there @HPCronus

  Welcome to the Forums of HP Support!

  The quick answer to any question about laptop computers and games is no, unless it's a phone specifically optimized game. Most of the time the laptops are meant to be portable and able to operate for an extended period on their batteries, so there design falls into this philosophy.

  Play games of increasing complexity requires the cpu to work harder than during the normal application operation and uses also the GPU as well, and that generates automatically more heat.

  Why computers generate heat

  I hope this helps.

• How to get the computer to recognize the Extender

  original title: I have a range of universal wifi netgear WN3000RP to extend, received the signal from my router, but don't know how to say my comp I have extender

  I have an exterder of range universal wifi WN3000RP received the signal from my ROUTER, but don't know hoe to program my comp. to receive the signal of the Extender

  Hello

  1. what operating system do you use?

  2 have had any changes made to your computer before this problem?

  I suggest you try the steps mentioned below and check if it helps:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  See also:

  http://forum1.NETGEAR.com/showthread.php?t=76411

  Hope this information is useful.

• How to store the last dialogue view

  recently, I found a switch in Windows that makes windows keeps the last view of a dialogue, instead of coming up with the opinion that he believed.
  Thus, for example, when you select her Browse... dialog, you get usually quite a small window with the view set to 'list '.
  With this switch set, the type of window size and view of the previous use of the dialogue have been preserved, which suited me very well.
  Unfortunately, I did not keep a record of the order required and have lost this facility.

  Can someone tell me please? It was an order given during execution of a prompt of commands as an administrator with the form

  ' commandxxx variablename 0 or 1' if I remember correctly, with the variable being something like LastDiag or last display.

  Hi Rojabro,

  You can take a look at this Microsoft article and see if it helps:

  http://TechNet.Microsoft.com/en-us/library/ee176868.aspx

  You can also refer to the following thread explaining the difference between the commands and PowerShell prompt:

  http://social.technet.Microsoft.com/forums/fi-fi/w7itproperf/thread/f94c9dfb-20de-485D-9093-1f7a154ac4c4

  If the article above does not help to solve the problem, you can post your request in the TechNet Forum for assistance:

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Hope this information is useful.