N300 wireless Extender - using the Extender Network and the primary network

Similar Questions

• P1102w "unable to communicate with any wireless router using the provided SSID"

  Hi all, apologies if there is an answer to that somewhere, I took a look, and several people have had something similar, but without a clear resolution.

  I got a job p1102w successfully for about 2 years now and this week he suddenly won't print wireless. No recent changes to the network, no change to the printer, no changes to the computer.

  No luck with simple things so I reinstalled the printer (it works via USB), but when I get to the wireless network configuration steps I encountered a problem.  Automatically scan for wireless networks detects my home network, but by selecting translates "unable to communicate with any access point or wireless router using the provided SSID. The same error message occurs when you try to connect to a network wireless of my neighbors.

  Any ideas would be very appreciated.

  Isaac

  At this point, I would say that there is a problem with the card wireless in the printer.  Do you know if this printer is under warranty?

  www.HP.com/go/warrantycheck

  If your printer is still under warranty, then I suggest call HP for Technical Support on this printer.

  Contact HP worldwide | HP

  Jason

• How to extract the values of the line full in the bean to support using the primary key

  Hello

  I have a table that has columns as plant_name, business planner email id and identification of email resident engineer. Here, Plant_name is the primary key.

  Now, I have this plant's name slipped and dropped like selectonechoice (drop) on page jsff. In this user can select any name of 1 plant drop down.

  Right now, I can go get plant in backing bean name, but I can't understand how business plan for extraction and identification of email of the engineer resident in this key primary-plant_name at the bean to support.

  Please let me know if anyone has an idea in this regard.

  JDeveloper version 11.1.1.6.0

  Thanks in advance.

  Sneha

  Sneha211 wrote:

  On the jsff page

  required = "#{bindings." Plant.hints.Mandatory}.

  shortDesc = "#{bindings." Plant.hints.ToolTip}.

  ID = "soc1" unselectedLabel = "- Select -"

  autoSubmit = 'true '.

  Binding = "#{backingBeanScope.backingbean.plantbean}" > "

  ID = "si1" / >

  In backing bean

  DCBindingContainer = lBindingContainer

  (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  DCIteratorBinding lBinding = lBindingContainer.findIteratorBinding("SupplierVO1Iterator");

  NewRow row = lBinding.getCurrentRow ();

  String aamplant1 = (String) newRow.getAttribute ("Plant");

  Hi Sneha, you've written code for it

  you have found the current line and the primary key then this line, then why you not not using this same rank to get the other attributes?

  NewRow row = lBinding.getCurrentRow ();

  String aamplant1 = (String) newRow.getAttribute ("Plant");

  String businessPalnner = (String) newRow.getAttribute ("business_planner"); Returns the value of the same line
  

  Engineer in String = (String) newRow.getAttribute ("engineer");

  
  

  OR if your condition is like that-

  you have a primary key field value, but you do not have the corresponding line, then you can get that line and it's attribute by using the primary key value

  See - http://adfgouravtkiet.blogspot.in/2012/10/filtering-of-data-from-vo.html

  Hope it helps

  -Ashish
  

• creating a unique index of instaed of using the primary key index

  Hello
  
  I heard in a debate sometimes it is better to create a unique index on a column and use it instead of using the primary key index in oracle. I did not understand what that the reason propely.
  
  Can someone please help me in this topic if it is valid.
  
  Thanks in advance

  On the surface, which does not seem reasonable... Volume of the DML is irrelevent to determine which column is the primary key for a table.

  My wild speculation a bit at a reasonable time could someone do...

  If you use synthetic primary keys (i.e. the keys generated by sequence) and that your tables are subject to large volumes of inserts such as there is a danger that the block "to the right" will be the source of contention block and worry not about analysis of beach on the column, you can create a reverse on this column (unique or non-unique) key index before creating the primary key constraint and to indicate Oracle to use this existing index to respect the primary key constraint.

  Obviously, however, this involves a lot of assumptions to arrive at a reasonable point. There may well be another set of assumptions that could also lead to a valid argument. Or it could be a myth that someone has heard and just repeats.

  Justin

• I can load the wireless keyboard using the IPhone charger form?

  I can load the wireless keyboard using my IPhone charger?

  Strictly speaking, they are not quite universal.  It varies, but what happened to the one that came with the keyboard?

  Take a look at this document from Apple.

  https://support.Apple.com/en-GB/HT201700

• Performance problem on the SQL query that does not use the primary key index

  Hello!
  
  I have some performance issues on a single SQL query (Oracle 10 g).
  I could solve the problem by using the INDEX indicator, but I would like to know WHY this is happening.
  
  * Tables *.
  create table jobs)
  ID number (5) not null,
  name varchar2 (100),
  primary key constraint Job_PK (id)
  )
  /
  -Record count: 298
  
  create table Comp)
  integer ID not null,
  name varchar2 (100),
  primary key constraint Comp_PK (id)
  )
  /
  -Record count: 193
  
  -Relation m: n
  create table JobComp)
  integer ID not null,
  id_job integer not null,
  id_comp integer not null,
  primary key constraint JobComp_PK (id),
  unique key constraint JobComp_UK (id_job, id_comp),
  Constraint JobComp_FK_Job foreign key (id_job) refers to Job (id),
  Constraint JobComp_FK_Comp foreign key (id_comp) makes reference Comp (id)
  )
  /
  create index JobComp_IX_Comp on JobComp (Cod_Comp)
  /
  create index JobComp_IX_Job on JobComp (Cod_Job)
  /
  -Record count: 6431
  
  * Ask *.
  
  When I run this query, the execution plan shows the index using (JobComp_PK and JobComp_IX_Comp).
  No problem.
  
  Select JobComp.*
  of JobComp
  Join jobs
  on Job.id = JobComp.id_job
  where JobComp.id_comp = 134
  /
  -runs in 0.20 sec
  
  But when I add the field 'name' of the work table the plan uses full access table to the table of work
  
  Select JobComp.*, Job.name
  of JobComp
  Join jobs
  on Job.id = JobComp.id_job
  where JobComp.id_comp = 134
  /
  -runs in the 2.70 dry
  
  With the help of the index
  
  Select / * + INDEX (Job Job_PK) * /.
  JobComp.*, Job.name
  of JobComp
  Join jobs
  on Job.id = JobComp.id_job
  where JobComp.id_comp = 134
  /
  -runs in 0.20 sec
  
  * Doubt *.
  
  This behavior is correct?
  
  PS. : I tried to recalculate the statistics, but nothing changes:
  
  analyze the job calculation table statistics.
  /
  change the statistical calculation of index Job_PK reconstruction;
  /
  Start
  dbms_utility.analyze_schema (sys_context ('userenv', 'current_schema'), 'CALCULATE');
  end;
  /
  
  [of]
  Gustavo Ehrhardt

  Gus.EHR wrote:
  Hello.
  I'm sorry for the plan unformatted.
  The execution time of the querys "without field name' and 'with the field name with suspicion" are equal.
  He has no problem caching, because I get the plans of the sequence different from the querys and repeated the performance. The result is always the same.

  I don't think that there is no problem with oracle crossing LOOP IMBRIQUEE to the HASH JOIN when you include the field name and this should be the expected behavior. But it seems that your WORKING table has a degree of parallelism set against what is causing the query to run in parallel (as JOB table is now available with full table scan, instead of indexed access earlier). It could be that the parallel execution is contributor to extra Runtime.
  (a) do you know why the degree of parallelism on the WORK table has been defined? Do you need it?

  You can see if the following query provides a better response time?

  select /*+ NOPARALLEL(JOB) */ JobComp.*, Job.Name
    from JobComp
    join Job
      on Job.id = JobComp.id_job
   where JobComp.id_comp = 134
  

• Wireless router has been reset, now the printer does not print wireless, cannot use the CD to reinstall the

  After our wireless router has been reset, our printer lost its ability to print wireless.  The error message indicates that the printer settings are not compatible with the settings of the wireless router. My CDROM drive is not working so I can just uninstall and reinstall it with the CD.  How can I change the printer settings to match the settings on my router?

  Hi there adamkarin,

  Thanks for your info!

  This is the link that you need to help set up the printer on your wireless network.

  Installation of the printer software for a network connection Wireless (via an Access Point)

  Good luck

• How can I remove the microsoft account and use the address as one alias on another?

  So I have two microsoft accounts using gmail addresses, the first is the one who has all my data (throughout the onedrive, Skype, xbox, windows, etc.) and the second has nothing. I want to do is delete the second so that I can use the address as primary on the first alias (as is my most used gmail account). Is this possible?

  account 1: * e-mail address is removed from the privacy *.

  account 2: * e-mail address is removed from the privacy *.

  Hi Dan,.

  Thanks for posting in the Microsoft Community.

  From the description, it seems that you want to remove one of the two Microsoft accounts.

  Once you remove the secondary account from Microsoft, you can use the primary address, but you can go as an alias. 

  To remove a Microsoft account, you can see the Microsoft article and check if that helps:

  http://Windows.Microsoft.com/en-us/Windows-8/remove-account

  Note: Before deleting an account Microsoft make a backup of data.

  You can also consult the Microsoft account and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Live/account-close-account

  To remove the Gmail account, you can green light, making the Gmail Web site.

  Just reply to the State of the question.

  Thank you.

• Turn on/off wireless so that the laptop is connected (external keyboard)

  Portégé R700-184
  Part number: PT311E-02Y01JEN

  Hello

  Can someone tell me how to turn on/off wireless switch using an external keyboard for docking station is the R700 while it is on it?

  We only seem to be able to turn on/off wireless by using the key on the keyboard (Fn + F8) construction.

  Also, is there anyway that wireless can be turned off by default at startup upward? Is this something that can be done through the BIOS, or perhaps by twisting a registry key?

  Grateful for any help.

  :-)

  I have a better idea: as you know you can use Flash cards to move the pointer on the top and in two mouse clicks, you can turn off WLAN.
  So you n t need special option for external keyboard or anything else.

  Open flashcards settings and activate the option allow the mouse to bring up maps, click on map of F8 and choose the option you want.

  It is very easy.

• F20 - 132 - can I connect a wireless antenna in the antenna of my TV connector?

  Hi... I think I missunderstood something when I read the manual of my laptop... maybe someone can help me with this problem

  It is possible to connect a wireless antenna uses the same input, used for the TV antenna?

  Currently I use an adapter (supplied with my laptop) for my cable TV to work, but without this adapter I can plug an antenna wireless in there?

  This seems really strange, but that's what I heard in my manual... or the translation of the English-Portuguese was bad: P

  Can someone explain if I can plug an antenna and what type and which connector I need.

  THX in advance and sorry for my rusty English

  Hello

  The adapter is needed to connect the antenna cable, because the antenna cable supports different jack. If the wireless antenna must have the same cable as a normal antenna if cable adapter is required.
  Maybe the 3rd party Wlan antenna has an own map but I n t think so.

• WIP 310 of configuration using the Web User Interface

  I just got my new WIP 310 - G2 phone and try to connect via my wireless router using the web interface of the phone.

  I don't see how I have the card information provided by my VoIP provider for different fields in the Web interface.

  I got information is of approximately

  • Name of user and password (phone number)?
  • Proxy IP and Port requested
  • Outgoing Port and Proxy number
  • Expire time
  • Time to package
  • DTMF relay
  • UDP Port number
  • RTP Port number

  Hope that somepone could help me with some links to documentation and advice on how to do it.

  See this link to configure WIP 310.

• Not able to scan from the printer to my computer control panel using the HP Photosmart 5510

  Hello

  I recently bought the new HP Photosmart 5510 all in one - and I am not able to scan from my printer to my computer.

  I am however able to scan by launching the scan of the computer. I talked to HP customer earlier this evening and we ran printing + scan doctor and can't find any problems.

  I am running Windows 7-64 bit and that you have installed my wireless printer using the Installation CD supplied with the printer today.

  I could not finish troubleshooting with the technician that I talked to because I had to go to work. The person that I spoke with proposed possibly the full functionality of software downloaded from the hp.com site, which I'm happy to do, but I think that it is useless, because I have the CD of installation here. (The rep that I talked to was very nice, but I prefer not to have to uninstall and reinstall if it is not necessary)

  Because as I mentioned above, everything works perfectly and I am able to scan - but not directly from the printer itself.

  When I try to scan from my printer to my computer an error message appears on the control panel of the printer indicating that: there is no scan destination options of analysis chosen / no..

  However, I can't find anywhere with my HP software where I could add / make sure that the destinations were there. (As I could on my other printers. (IE. By the solution Center)

  This printer does not appear to be a solution center that I could find and the scanner installed with the CD icon doesn't give me any options regarding changing the settings of the parser

  I wonder:

  1. the Hp Photosmart 5510 does not have the capacity to scan from the printer control panel?

  2 OR the CD installation provided with my printer only has the base drivers as the agent of tech support suggested? Which means to scan from my printer I need to download drivers for your hp Web site?

  3. or is the problem because of something else entirely?

  Thanks for your help!

  HI Dublin,

  Follow the steps below to uninstall and reinstall the printer.

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall the Photosmart 6510 in the list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the drivers and full software functionality, and then reinstall the printer.

  Version 28.8

• How to prevent the host ESXi 6 to use the graphics card?

  In my ESXi host computer, I have a NVIDIA Quadro 2000 graphics card. However, the host takes the graphics card to start stop passthrough to Virtual Machines (VM). Is there a way to prevent the ESXI host enter the graphics card primary?

  "< a href ="https://justus.berlin/2015/06/enable-passthrough-of-mainprimary-gpu-in-xenserver-6-5sp1/"> XenServer has the means to prevent the army to use the main graphics Cardinal < /a > if all goes well it a similar method for ESXi.

  This last post is an attempt to set the record straight about the ESXi host using the primary (or only) graphics card. In addition, more information will provide about success past by the graphics card to a virtual machine that is used with a monitor and peripherals as a workstation.

  Configuration

  ESXi 6.0.0 U2 (Build 3620759)

  Material

  Workstation HP Z620 (J61 BIOS v03.88)

  (1) Xeon E5-2670

  64 GB OF DDR3 MEMORY

  (1) NVIDIA Quadro 2000

  VM - Windows 7 Professional SP1

  #1

  There is no need to prevent the host from the use of the graphics card beyond to choose the graphics card to get through to a virtual machine. Do alerts if the host and the appropriate parameters are defined automatically. However, the Web Client vSphere does not reflect this behavior when running Firefox on Mac OSX 10.11.3 47.0.1. Recommend use if possible vSphere Client. It presents a panorama that is closer to the real situation within 6 ESXi. If the Web Client is not the height by the time vSphere client is relieved there will be real trouble.

  #2

  At this point, I think, the pilot VSGA vSphere installed as part of "vmware tools" on a virtual machine is required for the successful graphics card through to a monitor. The process of solving problems associated with a virtual machine to crash the host on VM shutdown or restart has led to the false impression that an uninstall of the VSGA vSphere pilot was necessary for the proper functioning of the virtual machine. Do not uninstall the driver VSGA vSphere.

  #3

  A virtual machine with passthrough crashing the ESXi host when to stop or restart a VM guest is not unusual. Click here to see an informative discussion about this and how to fix the problem. If the link does not head the Forum of the source, the House and perform a descriptive research. Essentially, the problem seems to be generated by the interaction of the VM with the PCIe bus on start/stop. In my case, after each accident, the ESXi host area before any PCIe 2 location where the graphic card is installed. See the transponder required for features in the BIOS of HP.

  #4

  ESXi through a GPU was a PITA. It is possible to give enough time and effort. VMware documentation is miserable, so dependent on human is a given. Be sure to leave breadcrumbs for others.

  TTFN,

  Jake

• Any solution to use the same IP configured on Windows 7 to Windows XP Mode.

  Hello

  Currently I have the Installer Windows XP mode on Windows 7. The environment requires static IP address within the specific range (eg. 192.168.6.xxx) to download documents from the repository (server). But because of the limitation on the static IP address, is there a work around where XP Mode can use the primary IP configured on Windows 7? Please specify.

  Best regards

  Verhasselt

  (moved from XP)

  Hello Vasanth,

  Thanks for posting your query in Microsoft Community. I apologize for the late response. The question you have posted here would be better suited in the TechNet forum. You can use the link below to post here.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  I hope this helps.

• How to extend the network and using the Ethernet port to connect an older computer without wifi capability

  I have a wireless network with my Time Capsule, but also I have an old computer without wifi capability. Is it possible to share the connection to this computer that connects an airport express (model A1264) to extend it and the computer thought that the ethernet port on the Airport express?

  Thank you.

  Yes