Use of Variables in the statement of sym.play(1000)

Similar Questions

• Can Oracle 10g - I use a variable for the access of the user identifywhat tablesto?

  I have the following code in a trigger (PL/Sql block) of a form:
  
  Select fieldname in user1.sometable myvar;
  
  is it possible to use a variable instead of coding hard "user1"? And on the same subject, this variable would also be declared in the world?
  
  Thanks in advance,
  Darren

  Hello!

  User1 is the owner of the table sometable.

  If only the User1 runs your form, there is no need to put the tableowner in front of the tablename parameter.

  If other users run your form, you must create a public or private (for each user) synonym of this table.
  After that, you don't need to use owner.tablename in your sql statement.

  But:
  You cannot use a variable for the user name without using dynamic sql
  as you do if you create a recordgroup.

  Concerning

• Use of variable in the For-Each statement

  Hello gurus.
  
  I'm having a problem using a variable, I created in a statement for each. Here is the code I am using
  My goal is to create a variable based on the type of Bill. If the invoice is a proof or a reprint, a copy should be printed. If it's a final bill, I need two copies.
  
  <? xdoxslt:set_variable($_XDOCTX,_'x',_0)? >
  for each<? If: Print_Additional_Header_Text_ID238 = "PROOF"? > <? xdoxslt:set_variable($_XDOCTX,_'x',_1)? > <? end if? >
  <? If: Print_Additional_Header_Text_ID238 = "REPRINT"? > <? xdoxslt:set_variable($_XDOCTX,_'x',_1)? > <? end if? >
  <? : otherwise (Print_Additional_Header_Text_ID238)? > <? xdoxslt:set_variable($_XDOCTX,_'x',2)? > <? end if? >
  <? xdoxslt:get_variable($_XDOCTX,'x')? > <? for-each@section:xdoxslt:foreach_number($_XDOCTX,1,$x,1)? >
  
  foreach is the loop that I use to repeat sections of the Bill.
  
  When I run with the last impression for each preview, I get an error that says "undefined variable: 'x'"»
  But when I remove the last for each good variable, 1 or 2, will show in the invoice.
  
  My question is: How can I use the variable 'x' in <? for-each@section:xdoxslt:foreach_number($_XDOCTX,1,$x,1)? >
  
  TIA
  Darius
  
  Published by: 852460 on May 24, 2011 08:31
  
  Published by: DEK17 on July 20, 2011 13:15

  Probably, this will help you

  http://winrichman.blogspot.com/search/label/multiple%20copy

  Try

  
  or
  
  

• The use of variables in the help of timelines

  I wonder how can I use this code for a nav to change the wire and outside the States.

  This line of code works.

  sym.getComposition () .getStage ().getSymbol("Section2") .getSymbol ("map_Popups") .getSymbol ("U SA") .play ("Over");

  I try to save every country in a variable, but do not work.

  sym.setVariable ("current2", "USA");

  sym.getComposition () .getStage ().getSymbol("Section2").getSymbol ("map_Popups") .getSymbol (current2) .play ("over");

  Now you need a getVariable() to read. Try this:

  sym.setVariable ("current2", "USA");

  get the variable

  var newCountry = sym.getVariable ("current2");

  sym.getComposition () .getStage ().getSymbol("Section2").getSymbol ("map_Popups").getSymbol(ne_wCountry).play ("Over");

• Variable in the statement IF not working not

  Hey, I'm faced with a problem,
  
  This code which I use, basically I count all Emp and if Emp > 1, then I want to show 'Yes', but it does not work,
  
  <? xdoxslt:set_variable($_XDOCTX,'C',count(.//EMP))? >
  <? If: xdoxslt:get_variable($_XDOCTX,'C') > '1', then 'yes '? > <? end if?
  
  any ideas where I am doing wrong
  
  What is the syntax for the use of a variable with if statement?
  
  Any help would be much appreciated
  
  Thank you
  Ronny

  If you want to use if otherwise you can use as below
  1, 'Yes', ')? >

• The use of variables in the Calc scripts and business rules

  I'm sure that there have been previous discussions on this topic, but can anyone let me know the benefits of using variables in scripts of Calc and BRs?
  
  Thank you
  A

  I've never used variable Calc and after reading a guide to the study, which has talked about them, I didn't really understand the benefits.

  ^ ^ ^ I use variables all the time to make difficult abstract formulas. Here is an example.

  /*     Declare variables     */
  VAR varSalaryCosts ;
  VAR varProdOHLabXXXX ;
  VAR varXXXX ;
  
  A whole bunch of code here along with very limited FIX statement and then...
  
  "Salaried Labor"
  (
       varSalaryCosts = "Salary Costs"->"No Department"->"No Category"->"Salaried" -
                           "Wage Bonus"->"No Department"->"No Category"->"Salaried" -
                           "YYYY Retention Bonus 40%"->"No Department"->"No Category"->"Salaried" -
                           "YYYY 60% Ret Bonus Accrual"->"No Department"->"No Category"->"Salaried" ;
       varProdOHLabXXXX = "Number of Employees"->"ZZZZDepartments"->"Codes"->"Salaried" +
                           "Number of Employees"->"Blah Departments"->"Codes"->"Salaried" +
                           "Number of Employees"->"Humph Departments"->"Codes"->"Salaried" +
                           "Number of Employees"->"TTTT"->"Codes"->"Salaried" ;
       "Salaried Labor" = varSalaryCosts * ("Number of Employees"->"Salaried" / varProdOHLabXXXX) ;
  )
  

  The last formula is how the formula was described to me by the owner of the company. I find it much easier to read something like:

  "Salaried Labor" = ("Salary Costs"->"No Department"->"No Category"->"Salaried" -
                           "Wage Bonus"->"No Department"->"No Category"->"Salaried" -
                           "YYYY Retention Bonus 40%"->"No Department"->"No Category"->"Salaried" -
                           "YYYY 60% Ret Bonus Accrual"->"No Department"->"No Category"->"Salaried") *
                           ("Number of Employees"->"Salaried" /
                           ("Number of Employees"->"ZZZZDepartments"->"Codes"->"Salaried" +
                           "Number of Employees"->"Blah Departments"->"Codes"->"Salaried" +
                           "Number of Employees"->"Humph Departments"->"Codes"->"Salaried" +
                           "Number of Employees"->"TTTT"->"Codes"->"Salaried")) ;
  

  I used the TABLE in a calc script really-cool-but-alas-not-invented-by-me do better than planning made the conversion of currency currency conversion in planning. (How's that for a run-on sentence?) It is one of the six blog posts that I'm trying and I will end it soon, I hope. I am now thrash mode. It doesn't have its uses and I'll try to remember to update this thread when I'm done.

  Kind regards

  Cameron Lackpour

• Use a variable in the paragraph in PL/SQL

  Hello

  Please let me know how to use variable in the PL/SQL Select query clause.

  [code]

  create or replace PROCEDURE emp

  2 EAST

  emp_id 3 VARCHAR2 (1000);

  4 BEGIN

  emp_id 5: = '1989100351, 1989100352, 1989100354';

  6 - emp_id: = '1989100351';

  7 FOR rec IN (select employee_id of employee emp_id WHERE employe_id IN)

  8 LOOP

  9 dbms_output.put_line (rec.employee_id);

  10 END OF LOOP;

  11 END emp;

  12.

  DISPLAYS THE ERROR MESSAGE;

  Created procedure.

  [email protected]/ICSN - SQL > no errors.

  [email protected]/ICSN - SQL > EXEC emp;

  BEGIN emp; END;

  *

  ERROR on line 1:

  ORA-01722: invalid number

  ORA-06512: at "emp", line 7

  ORA-06512: at line 1

  [/ code]

  You cannot use pl/sql variable with values separated by commas in the paragraph directly, you must break into multiple records

  Try this too [g 11]

  create or replace PROCEDURE emp

  IS

  emp_id VARCHAR2 (1000);

  BEGIN

  emp_id: = '1989100351, 1989100352, 1989100354';

  FOR rec IN (select employee_id from employee WHERE employe_id IN ())

  Select (column_value) .getnumberval)

  from xmltable (emp_id)) double.

  )

  LOOP

  dbms_output.put_line (Rec.employee_id);

  END LOOP;

  END emp;

  /

• Using of Variable in the filter expression will not scan.

  IN ODI 11.1.1.3.0, I've defined a Variable of type 'Alphanumeric' (SelectionDate), default = January 1, 1970 with the query select: select to_char (SYSDATE, 'DD-MON-YYYY') of double.
  I intend to use this variable as a scenario (parameter) variable that receives a value in the form "DD-MON-YYYY', of the execution environment.
  I refreshed the variable and the value received June 16, 2011 (current date). So far so good.
  
  Then, I defined an Interface and use the variable in a filter expression:
  
  Filter active: checked
  
  Tab implementation:
  SOURCE_VIEW. SELECTION_DATE BETWEEN TO_DATE (' #PROJECT1.) SelectionDate', 'DD-MON-YYYY') AND (TO_DATE (' #PROJECT1.)) SelectionDate', 'DD-MON-YYYY') + 1).
  
  Run on: Source
  
  During the verification of the expression (click the check mark in the application tab) I always get: Expression is not valid for the DBMS. java.sql.SQLDataException: ORA-01858: a non-digit character was found here where was waiting for a digital.
  
  I can't filter to analyze. Thank you for your ideas of what could be wrong.
  
  
  
  Jose.

  Hi Jose,

  You must set this variable in a package and refresh it. Then place your interface with the current filter condition.
  Run the package. It should work.

  Thank you
  Fati

• Column unresolved when using presentation variable in the filter responses

  Hi all
  
  I am using a dashboard command prompt that sets a variable presentation - pres_year. I use the presentation variable in the filter of the application.
  In the 'Criteria' tab, in the filter for a request, I put a year column (YEAR) the presentation via the Expr Variable variable and enter the variable name of presentation only. End up with:
  YEAR is equal to / is in @{pres_year}
  
  When you use the dashboard, the prompt and ask all work fine. The problem is when I'm in demand for answers and I click on the "View results" button I get the following error:
  "NQSError: 27005 unresolved column pres_year'.
  
  Any suggestions?
  
  Thank you.

  Set a default value after the presentation variable in your filter. If you put no default value, and then in the responses, the application not of value to the variable of presentation. Click on the filter and add default value. Then it won't work.

  Edited by: David_T on October 14, 2010 08:13

• How to use a variable in a statement attachMovie?

  Hey guys.

  What I'm trying to make is simply this:

  < variable > = mvcShip

  var ship1 = _root.attachMovie (< variable > shipName + _root.getNextHighestDepth (), _root.getNextHighestDepth ());

  What I'm trying here is to the same variable in the name of an item in my library. (Im using this to use different ships in a vertical shooting game old style arcade).  The goal is to make a ship to appear on stage.

  Where < variable > is replaced by a library (for example. mvcShip) item, it works fine, but if the variable is in place, I get a value of trace of ship1 as "undefined", and the ship does not appear on the scene.

  Any help would be appreciated

  P.S. Please ask if you want to reach me the full code.

  The Flash help documents are probably your best reference to understand how various functions of coding work.  Here's the attachMovie method

  attachMovie (id:String, name:String, depth:number);

  Or more towards what you do...

  var shipName:String = "mvcEnMissile";

  var missile4 = _root.attachMovie (recipient, shipName, + _root.getNextHighestDepth (), _root.getNextHighestDepth ());

  Where mvcEnMissile is the ID of the connection that you assign to the movieclip in the library through the properties-> link options in the menu library.  mvcEnMissile is not the name of the element you that you see listed in the library, unless you have attributed to him under the name of the library and the link ID

• How to use text variables and the Image for printing

  I work for several months on the product with AS3 Configurator.
  I am not competent with AS3.
  Now, it seems that perhaps my design is all wrong.
  Is there a good way to do this?

  I have a main scenario that has video clips showing images of different options for the product.
  On the first image, I use buttons to select the choice for option 1 of the Option1_mc.
  Can I store the selection in a variable.
  I use a button to go to the next choice (screen 10.)

  On frame 10, I use buttons to select the choice of option 2 in the Option2_mc.
  It is stored in another variable.

  There are about 10 options that are selected and stored in variables.
  Some are text values and other images taken from video clips Option instances.

  I made a Print_mc to use to printjob.
  I can't get the values of the variables to display the first image for printing.

  Any helpl would be appreciated.

  You are welcome.

  you will not be able to insert a variable into a textfield.  you are going to assign to the text of your TextField property set to one of your points of variables to.

  Thus, for example, if you have:

  var var1:String = 'this is a test ';

  You can use:

  TF. Text = var1;

• using local variables in the help of calc

  Hello
  
  I am trying to use local variables in a calc by declaring two variables and then referencing these two variables to do some math. However, I get an error: error: invalid member name 1012004 [Cumulative_Biscuits]
  
  Anyone know why it gives this error? I'm he declare incorrectly? Here is my code.
  
  
  
  
  
  ESS_LOCALE English_UnitedStates.Latin1@Binary
  
  UPDATECALC OFF SET;
  SET AGGMISSG
  SET CACHE HIGH;
  SET CREATENONMISSINGBLK
  
  
  var Cumulative_Biscuits, Average_Biscuits;
  
  Difficulty ("New York", "Cola", "Budget", & CurrYr, & CurrMonth)
  
  / * Calculate the Cumulative cookies for 24 months * /.
  Cumulative_Biscuits =
  
  @Sumrange ('cookies'-> 'Real', @XRANGE (PriorYr02-> PriorMonth02, & PriorYr02-> Dec)) +.
  @Sumrange ('cookies'-> 'Real', @XRANGE (PriorYr01-> Jan & PriorYr01-> Dec)) +.
  @Sumrange ('cookies'-> 'Real', @XRANGE (CurrYr-> Jan & CurrYr-> PriorMonth));
  
  / * Now calc average 24 previous months * /.
  Average_Biscuits = Cumulative_Biscuits / 24;
  
  ENDFIX
  
  / * Now to spread the calculated average above for the next 20 months in the current scenario * /.
  
  
  Difficulty ('New York', 'Cola', 'Budget')
  / * End of month will always be Dec here * /.
  Fix (& CurrYr, & CurrMonth:Dec)
  
  "Cookies" = Average_Biscuits-> & CurrMonth;
  
  Endfix
  / * Month will always be Jan to Dec here * /.
  Fix (& NextYr, Jan: Dec)
  
  "Cookies" = Average_Biscuits-> & CurrYr-> & CurrMonth;
  
  Endfix
  / * Beginning of month will always be Jan here * /.
  Difficulty (& NextYr02, Jan: & NextMonth02)
  
  "Cookies" = Average_Biscuits-> & CurrYr-> & CurrMonth;
  
  Endfix
  
  Endfix

  Maybe this will help you too:- Re: calculation with temporary variables does not work

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Could not use brush history because the State of the story doesn't have a corresponding channel Please HELP CS6

  Whenever I try to use my history brush, the error pops up and I have no idea why. If I try just to open a blank document and use the brush it does not give me this error and I can 'use' the brush, but nothing is displayed on the project. Anyway, so when this error happens im trying to do a project and say I put a leader (picture) in the project and it's the first thing I do. I place, then I sized the image down some. I'm then a new layer to use the brush to behind the image and then that's when I get the error. I have no idea what is wrong can someone please help me I'm desperate: (.)

  It drove me crazy too and I couldn't find anything on the Net or in all the tutorials on the Adobe site. The solution I found is extremely obscure - it seems that it is essential when you take the snapshot for the layer of story that you do not choose the default option in the snapshot dialog box that appears to allow you to name the snapshot. In this dialog box, use a "Comprehensive Document", instead, click on the arrow to select the option below that is 'Merged layers', then it worked like a charm. Good luck!

• Can we use repository variables in the SQL statement of the guest of the column?

  Hi guys,.
  This is the query
  SELECT '-End Date '. " End year"OF"The consumer sector"WHERE ("-End Date "." ") End of year' = valueof (current_year)) or ("-End Date". "") (Year-end' = valueof (current_year) - 1).
  When you use this sql prompt of criteria being of error.
  Please suggest.
  
  Thanks.Sri

  Appreciate if you score as correct on the suggestion

  Also your old messages, at least let us know your comments ;)

• Use of variable in the instructions of expression TestStand

  I'm trying to implement the following:

  Locals.tot_power = (Locals.reading + Locals.tot_power) 10th

  as long as expression of TestStand, he does not accept the variable locals.reading for power exp. is it possible to do it somehow?

  I guess that there is also another simple solution that is to use the Evaluate() function.
  In the following example, Locals.MyNumber and Locals.Exp are numeric variables.

  E.g.:
  Locals.MyNumber = evaluate (Val ("10F" + Str (Locals.Exp)))

  Roberto Piacentini
  National Instruments
  Technical sales engineer
  www.NI.com/support