USB storage file change password

Similar Questions

• WNR2200 Netgear ReadyShare USB storage does not

  I have trouble getting the USB ReadyShare working on my router Netgear WNR2200 storage. If I reset the router to factory by using a paper clip and now the reset button in and then just connect a computer to Ethernet, 1 Port, it works fine and I can access by typing just "\\readyshare" in windows Explorer. Unfortunately I can not leave the router with its factory settings as it is not good for my network, I disable DHCP, because it's the 3rd router on my network. The router itself works great when I do that, all the computers connected to have a connection to the internet and can also connect to each other etc... purpose storage readyshare file sharing no longer works. It's just as if she is not there.

  While I was trying to experiment when he actually stopped working, so I reset the router to factory settings and started again. Connected to the computer first to 1 Port Ethernet and it worked fine as before. Went in the router settings and turned off DHCP and it has always worked well. It is only when I actually connect the router to other routers which ReadyShare USB storage stops working. When it is assigned an IP address from my main router which is the DHCP I guess? I don't know why that's upsetting it well? I checked on the same workgroup (a setting that I didn't notice initially) but also makes no difference.

  Does anyone have an idea what I am doing wrong? I guess it is just configured wrong and it's probably something really simple, but I can't see it. Any help would be much appreciated, thanks!

  Simon

  Change the LAN IP is affecting an IP address on the WNR2200 to be in the same range of main router.

  You will be able to change this in the LAN Setup.

  The steps would be:

  1. do you have a computer just be directly to the WNR2200 and nothing else.

  2. navigate to the router admin page.

  3. change the LAN IP to a unique IP address, such as 10.0.0.200 or one IP address that is not used in the network.

  4 disable DHCP.

  5. once the settings are saved, connect the main router to one of the WNR2200 LAN ports.

  From there, you should be able to access the USB key.

  Let me know what happens.

• "Storage insufficient to create the shadow copy storage file or other shadow copy data"(0x8004231F). "

  I have Windows Vista Home Premium (32 bit) and you cannot create a system restore point.  Despite all attempts, I keep getting the error message "storage insufficient to create the shadow copy storage file or other shadow copy data"(0x8004231F). "  There is a large hard drive space (90 GB free with)< 70="" gb="" used). ="" how="" can="" this="" be="">

  Hi rebick,.

   

  Welcome to Microsoft Answers Forums.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  • When was the last time it worked?
  • Remember to make changes to the computer recently?

  First of all, I would say that you unplug any external drive connected to the computer except the keyboard and mouse.

  This error message can occur if there is some system files corrupted on your computer. Suggest to run a SFC scan, which would be a search for system files corrupted on the computer and replace them.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11 after the scan finished, close the command prompt window reboot the computer and check.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista.

  For more information please visit the link below.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  If the step above does not resolve the issue, I would say that you create a new user on the computer account.

  Log on to the new user account and check if you can create a system restore point.

  1. Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
  2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click on create a new account.
  4. Type the name you want to assign to the user account, click an account type, and then click on create an account.

   http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• EA6400 Problem FTP USB Storage

  When I do not restrict access to the files I can reach them by FTP

  

  When I restrict access I can't reach them more

  After usin my login, I got this screen

  

  As seen: the Transcend is not visible.

  Yes, I have the right to see and write about the USB storage.

  Anyone a suggestion?

  Use username: admin and password: the router password (default admin). Do not use your Linksys WiFi Smart password.

  Are you able to access the drive locally using the user Remi? The fact that you have checked the part of Transcend when you created the user Remi?

  Try the suggestion of Chadster by creating a new user, and then clear the browser. Or you can try using a different computer.

• EA3500 USB storage security

  I am the administrator of my HOME network and I would be the ONLY access to certain folders on a USB storage device.  I know that there is an administrator account and guest, already established which cannot be deleted.  As my HOME network admin I just type my user name and password in the admin area and then click on share?

  If you use a PC open a file browser and enter the following in the address bar

  \\192.168.1.1

  If you use a Mac open a browser and enter the following URL in the address bar

  SMB://192.168.1.1

  You should be prompted to enter a user name and password.

  In some cases, must be added the part about the end of the URL.

  Ex: \\192.168.1.1\my-share-name

• USB storage, software packages and WRT610N Rev.2

  Hello!

  I have two questions about WRT610N.

  First of all. Is that a firmware update is coming for the second revision of WRT610N? It's been a while since the release of the current version. In addition, Linksys E3000 was revealed and looking into its hardware specification, it is quite same router with a bit of software update.

  And on the other hand. I wonder about the firmwares, because I have little problem with storage connected to the USB port on the router. When I use the SMB protocol to download large files, my wifi connection can be moved, and NetBIOS service was corrected (specific Windows Event Viewer). After restored connection I can't use storage via SMB until you restart. FTP protocol works without any problem, but it is not so convenient.

  It may be the problem with my laptop, but I already tried different versions of the card WiFi driver (it's Intel 3945 ABG), and I can't change my OS (it's Windows 7, and Yes, I tried to clean install). So, I really hope the new firmware or your advice. Someone at - it met similar problems?

  Sorry for my English, I'm not native and thanks in advance.

  Although Ubuntu SMB Server is much more stable and stronger, then the operating system Windows and Windows performs well when transferring file using SMS Service.

  Maybe you can try to change some of the settings on your router, if all goes well, this should help you. Change MTU size on your router for 1300 and click on save settings... Then below click on the "Advance Wireless Settings" sub-tab and below to change the interval of tag to 75, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...

  Now, check if you are able to transfer large files from your computer to the USB storage...

• Windows 7 is no longer reads the USB storage devices

  I have a problem similar to some other posts, but different enough so that I write it here.

  When I insert a USB storage device (like a Microcenter * Go Flash) Windows 7 Ultimate just shows a yellow exclamation mark next to the device in Device Manager. OtherDevices, USB Flash drive. Software update driver fails, no update.  Uninstalling and reinstalling has no effect.

  Under properties:

  Type of device: USB FLash Drive

  Maufacturer: unknown

  Location: Port_ #0003.Hub_ #0008

  Pilot wrote:

  Privder: unknown

  DAT: Not available

  Version: Not available

  digital GIS: dig signed ot

  Under Details:

  Hardware ID: USB\VID_1307 & PID_0163 & REV_0100

  USB\VID_1307 & PID_0163

  There is no ping, no popup. Nothing. All this used to work very well, and now, when I need to copy files to work urgrnetly, he's dead.

  Just rub a little salt, I CAN access the device through Linux in VMWare Workstation. But when vmware is not current execution, or when I disconnect and try to attach to host, nothing happens.

  I tried each storage device USB I can find and no luck on any of them.

  Thank you

  TMB

  After digging through the forums, I tried to copy the usbstor.inf and .pnf to the Windows\inf directory and reinstalled the driver through the Device Manager, and it loaded right up.

  I don't know, but I suspect that the impact of this change, there are other devices that can complain. For now, the process of transfer between W7 and VMWARE/linux seems flawless.

  TMB - back

• Impossible to disconnect itself from USB storage devices

  Original title: USB storage devices

  Once more I couldn't properly disconnect a USB storage device because Windows tells me that a program is still using the device. There is no reason for any program to access it then why on earth isn't Windows the task/program name so that I can address the issue instead of having to restart my computer? Of the many irritants "characteristic" of Windows, it is one of the most galling.

  Hello

  ·        What is present in the USB key?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  I suggest you follow the steps mentioned in the article below and check if the problem is resolved.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  If there is nothing important in the USB device, I suggest you to format the device and see if the problem still occurs.

  Note: If there is no important data in the USB then, back up data, and then format the USB.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Drag and drop copy from C: to a USB storage device

  I saved a few songs my cloud storage on my C: drive.  How can I highlight these files and drag / drop in a device of USB storage for future use?

  The flash drive should show in the view of "Computer" (on Windows XP is called 'My Computer') similar to a player.  Just double click on the flash player and then paste the songs.

  DRM - Digital rights management - it prevents moving songs of moved between devices.

• How to change password email, cannot get the email account

  GI rlfreind change password, can not get into my account. need to change the account password for this * address email is removed from the privacy * can receive information on my * address email is removed from the privacy * box

  * original title - how to get my mail password is changed by angry girlfreind *.

  Hello

  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• Connection of external USB storage

  I connected an external hard drive (WD "My Passport", 300 GB) USB to my router (Cisco EA6500). The drive has been formatted to NTFS. My services 3 computers router.

  I looked at the Linksys WiFi Smart 'External storage' tools and see the FTP server is 'On', DLNA is 'On' and ensure access to records is 'On '. Access to the files tab all my computers have the permission to write & Edit and Delete actions.

  The external drive appears in the LinkSys WiFi Smart as a 'Network Device' online program.

  But it does not appear in Windows Explorer (or file such that named in 10 Windows Explorer).

  I'm unable to access this storage to record data, how do I do so?

  Hi, rszanti. Were you able to map a network drive on your computer? Network drive mapping is necessary so that you can access a device USB storage or storage network (SIN) attached to your router.

• Impossible to logon to share the folder with "User must change password at the next logon" in Windows Server 2003

  I use Windows Server 2003 R2 SP2 as a file server.  I create new user 'A' in Windows Server 2003 as well with the option "user must change password at the next logon" selected and give way under the group users and users in the domain for this user.  I then share an output folder.  User 'A' is using Windows XP SP3 to connect to this shared folder.  However, when I try to connect, Windows reappear to enter user name and password.  I think it is the limitation in Windows that the user 'A' will be unable to change the password at the next logon or change password at any point in time at all.  Correct me if I heard wrong.

  If possible, can someone enlighten me what is wrong or what I need to do for user to access folder and change the password on the first logon.

  If what I described is not possible, is there another way for me to configure for the user to access share folder so that the user doesn't have to join domain or user of the AD?

  http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

  You will need to repost the above Server forums.

  Here is the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• indication of password is necessary to change password

  Please help me to get a new indication for a changed password.  In others, I need to change the tip to match the modified and new password.

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read the BANNING of cracking of passwords information tools information provided in these forums in the thread above posted by Bill fill MSFT, moderator

  Mick Murphy - Microsoft partner

• User account is locked and says change password

  My wife has Vista on a Dell computer.  When she went to use his username happen but the password does not work.  Gave him a tip and then said to reset password.  When she tried, said she needed a disc which it doesn't have.  Everything is locked.  She can't do anything but the screeen of the user account and the guide to help change password and she has no disc.  Please help us.  Thank you.

  mohdrafi,

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And stop copy and paste other peoples work in these Forums!

  You copied and pasted above of my posts, my answer is different from Microsoft and I use "quotes".

  «Microsoft support engineers cannot help you recover passwords of the files and functionality of Microsoft who are lost or forgotten products.»

  Above is what he says to the Microsoft link. That's how I know you have copied and pasted what I post, which is below to:

  'http://support.microsoft.com/default.aspx/kb/189126 '.

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. »

  You do this with a lot of your answers and with other regular posters work in your answers on these Forums.

  Write your OWN answers.

  Mick Murphy - Microsoft partner

• How do I alphabetize storage files?

  How do I alphabetize storage files?

  Hi Betty,.

  Thanks for posting your query in Microsoft Community.

  Let me ask you;

  • Are you referring to records on OneDrive or in the PC?
  • Are you referring to files on an external drive?
  • Are you referring to sort records alphabetically?

  The four basic methods to organize how your files and folders appear in Windows 7 include organization, sorting, grouping and changing your display. Understand the differences between these options will help you customize and combine them at your leisure.

  I ask you to refer to the suggestions in the article below:

  Organize, sort, or group your files

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.