Use two assistants for the acquisition of data at the same time

Similar Questions

• Can I use two cards at the same time on the same computer?

  Hello

  I have two graphics cards, one is integrated, i.e. HD 2500, Intel and the other is dedicated, i.e. Nvidia Geforce GT620. My question is that can I use both at the same time on the same PC. Whenever I try to connect via a VGA cable (per processor) and DVI (via graphic card) at the same time, the screen goes black and when I take off the DVI cable, the screen will return. When I connect the DVI again after log on, there is just the theme of Windows and folders that I opened all get reduced. When I disconnect the DVI cable once again, I opened the folder displays again.
   
  I want to make use of both integrated and dedicated graphics card, I read on the internet that two graphics cards give a performance gain. Also, I'm a gamer. But in time, I bought my PC, I had no knowledge about computers. I want to use two graphics cards. Please tell me a way by which I can use two graphics cards at the same time without the problem described above.

  Yes, you can use two cards graphics, combined to boost performance. But it depends on a condition: the two (or more) cards must be of the same brand. To make it clearer, you can use two or more NVIDIA graphics (thanks to SLI technology) or AMD graphics (with CrossFireX technology, supports up to four graphics card in a single PC).

  But, a mixture of graphics cards of different brand, as NVIDIA and AMD or NVIDIA and Intel or AMD and Intel or NVIDIA, AMD and Intel, can not be used for SLI or CrossFireX.
  On the black screen, please follow the following link:
  http://support.Microsoft.com/kb/976064

• BlackBerry Smartphones using two BB with the same account of Blackberry.

  Currently, I have a BB 9900 and is considering obtaining a BBZ10. The 9900 has a standard sim card by which the Z10 I think a micro sim. (I still have to talk to my service provider relating to the regime of a sim 2)

  Is it possible to use two phones at the same time, if my provider allows, regarding BB services etc. using the same account etc?

  I thought that I have addressed this before first topic to contact my ISP.

  Thank you.

  Kind regards.

  You ask the subject from the BBID even on both devices?

  Yes, to a certain extent, on the data.

  E-mail and social accounts like Facebook and Twitter works perfectly.

  BlackBerry Messenger will use only a BBID on a device at a time... If you have the same BBID on both devices, you will need to choose which will be your active BBM.

  Of course, the main question to this is if your mobile operator will allow two SIM cards with the same account. Doubtful.

• Two applications at the same time on the M200?

  On the Amazon website (and I'm sure elsewhere), it says on the M200:
  "With the optional Tablet Multi Dock station, you can connect an external keyboard and monitor allowing you to run different applications on screens separated at the same time."
  I've been reading my M200 and the multidock and it doesn't say how to do this. It seems strange when it's supposed to be something special you can do with the M200, he's not telling how you do! Could someone enlighten me please?
  Thank you very much

  Hello

  In my view, this means that the option of extended desktop.
  If the external monitor is plugged so that you can use this option to enlarge the display option. This option, you can activate with the key FN + F5 combination. If this option is enabled for example, you can open two widows of IE and one from this window, you can switch to the external display. In this case, you can use two applications at the same time

  Good bye

• Has taken pc in for Reg. gliches & fix, now the speakers will not work! Have chked everything I know, still sound like dubbing, or two channels at the same time?

  I run a custom built Tower pc, with windows xp svc pk 3 on this subject. ASUS MB brd. have a large woofer and two small tweets, it looks like that I play the song even in two places at the same time, only not synchronized.  All confused, lived all the diagnostic test can think and all say it works fine of course.  As a result, been combing of this Council, but can't really find something sufficiently specific for this problem.  Or if it's here, Miss me him!  For any help would be appreciated, I wish you my songs back!  I tried to play off of windows media and hard drive also.

  BTW, I'm the old lady of 58, so, could you young computer scientists Genesis keep it as simple as possible!  Please, I beg you! Thank you very much!!

  Hello

  1. what Media Player do you use?

  Try and proceed as described in the link.

  How to fix sound problems in Windows XP:

  http://support.Microsoft.com/kb/307918/en-GB

• Mr President, how can I enter two rows at the same time with different default values that only the first line to use see?

  Mr President.

  My worm jdev is 12.2.1

  How to enter two rows at the same time with different default values that only the first line to use see?

  Suppose I have a table with four fields as below

  "DEBIT" VARCHAR2(7) , 
    "DRNAME" VARCHAR2(50),
    "CREDIT" VARCHAR2(7) , 
    "CRNAME" VARCHAR2(50),
  

  Now I want that when I click on a button (create an insert) to create the first line with the default values below

  

  So if I click on the button and then validate the second row with different values is also inserted on commit.

  The value of the second row are like the picture below

  

  But the second row should be invisible. It could be achieved by adding vc in the vo.

  The difficult part in my question is therefore, to add the second row with the new default values.

  Because I already added default values in the first row.

  Now how to add second time default values.

  Concerning

  Mr President

  I change the code given by expensive Sameh Nassar and get my results.

  Thanks once again dear Sameh Nassar .

  My code to get my goal is

  First line of code is

      protected void doDML(int operation, TransactionEvent e) {    
  
          if(operation != DML_DELETE)
               {
                   setAmount(getPurqty().multiply(getUnitpurprice()));
               } 
  
          if (operation == DML_INSERT )
                     {
                             System.out.println("I am in Insert with vid= " + getVid());
                         insertSecondRowInDatabase(getVid(),getLineitem(),"6010010","SALES TAX PAYABLE",
                          (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                         }
  
          if(operation == DML_UPDATE)
                            {                                                    
  
                               System.out.println("I am in Update with vid= " + getVid());
                           updateSecondRowInDatabase(getVid(),
                               (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                            }                      
  
          super.doDML(operation, e);
      }
      private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object value4, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "Insert into vdet (VID,LINEITEM,DEBIT,DRNAME,AMOUNT) values " +
               "('" + value1 + "','" + value2 + "','" + value3 + "','" + value4 + "','" + value5 + "')";  
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }
                }  
  
                private void updateSecondRowInDatabase(Object value1, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "update vdet set  AMOUNT='"+ value5+"' where VID='" + value1 + "'";                     
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);  
  
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }                  
  
                }
  

  Second line code is inside a bean method

      public void addNewPurchaseVoucher(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("VoucherView1Iterator");
                 RowSetIterator rsi = dciter.getRowSetIterator();
                 Row lastRow = rsi.last();
                 int lastRowIndex = rsi.getRangeIndexOf(lastRow);
                 Row newRow = rsi.createRow();
                 newRow.setNewRowState(Row.STATUS_NEW);
                 rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
                 rsi.setCurrentRow(newRow);
  
                 BindingContainer bindings1 = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter1 = (DCIteratorBinding) bindings1.get("VdetView1Iterator");
                 RowSetIterator rsi1 = dciter1.getRowSetIterator();
                 Row lastRow1 = rsi1.last();
                 int lastRowIndex1 = rsi1.getRangeIndexOf(lastRow1);
                 Row newRow1 = rsi1.createRow();
                 newRow1.setNewRowState(Row.STATUS_NEW);
                 rsi1.insertRowAtRangeIndex(lastRowIndex1 +1, newRow1);
                 rsi1.setCurrentRow(newRow1);
      }
  

  And final saveUpdate method is

      public void saveUpdateButton(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindingsBC = BindingContext.getCurrent().getCurrentBindingsEntry();      
  
                 OperationBinding commit = bindingsBC.getOperationBinding("Commit");
                 commit.execute(); 
  
          OperationBinding operationBinding = BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Commit");
          operationBinding.execute();
          DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("VdetView1Iterator");// write iterator name from pageDef.
          iter.getViewObject().executeQuery();  
  
      }
  

  Thanks for all the cooperation to obtain the desired results.

  Concerning

• Can I use the CC apps on my two computers at the same time?

  A full individual membership, two computers simultaneously, using 2 different applications of CC. For example: I am editing/export in Premiere Pro on one, audio with hearing or graphics with Photoshop on the other. Is this OK and I will be able to access creative cloud of these two computers at the same time?

  Thank you! Christy

  Hi John,.

  There was some confusion on this subject at the launch of creative cloud. The EULA States that you can install it on two computers at once, however, you may not use the applications on those computers simultaneously. This is the case even when you are not in the same application. Sorry for the confusion.

  Thank you
  Kevin

• TreeSize Professional - using this tool for the first time - need help to run the report

  Using TreeSize Professional for the first time and I need search records to analyze documents containing invalid characters and path names that are too long.  We are moving the content in SharePoiint and SharePoint will not accept path names that are more than 250 characters and invalid characters.

  Does anyone know how to do this research?

  [Moved from the community centre of Participation]

  What is a TreeSize question or a question of SharePoint?

  Try SharePoint forums on the left side of

  https://social.technet.Microsoft.com/forums/en-us/home?category=SharePoint&filter=AllTypes&sort=lastpostdesc

  Don

• Two users on the same PC. How to run the application even for two users at the same time?

  Hello friends,

  I have two user accounts on my pc. Is it possible to run the same application (for example: DEFRAG or disc cleanup utlities) for two users at the same time? I mean, these utlilities work by all of the computer or user account? That would mean the same application to perform for a single user in the background and foreground to the user, or I'm totally lost in space?

  Thank you for your comments

  You should run Disk Cleanup in each user account. Do not try to shut it down or change user when defragmentation; system files may be damaged. You must stop the defragmentation, log off, restart the defragmentation and don't really no point for it. MS - MVP - Elephant Boy computers - don't panic!

• How to open two PDFs at the same time (for example on two related screens)? It was always possible in the previous version of the Adobe Reader software.

  How to open two PDFs at the same time (for example on two related screens)? It was always possible in the previous version of the Adobe Reader software. Now while one of them is open, I can't open the other, because it is hidden, and I have only shown in the taskbar as a thumbnail.

  Hi ewap51098943,

  You can disable this in the Edit menu-> preferences-> General

  

  Kind regards
  Nicos

• Use student CC license on two computers at the same time?

  Can I use my license CC student on two computers at the same time without a problem? I know that I can install it on two computers, but I want to use at the same time in different places.

  A unique creative cloud membership can be installed on both machines only and you are also able to use both at the same time. This is a special exception that we have provided to our clients creative cloud.

  I hope this will help you.

  Creating cloud on 2 PCs

  Concerning

  Baudier

• Reconfigure fails when adding two volumes at the same time

  Hi all

  We use vRealize ver 6.2.1 6.2.1 Build Automation - 2543390.

  We found a bug strange reconfiguration of a virtual machine. If I add a volume of hd at a time, there is no problem. But if I try to add two volumes at the same time him reconfigure fails with the message "reconfigures has not, waiting for retry.

  

  On the vRA 'Infrastructure-monitoring-> log >' error is: "machine Reconfigure failed: Machine: xxx, error: apply WaitForTask StorageDrsRecomendations_Task Enttity...» XXXX.VMDK invalid data store path.

  

  On vCenter Console, the error is: "path of the invalid data store [Cluster... vmdk]."

  

  The same error occurs using vCenter 5.5 x and 6.x

  Any ideas?

  Thank you very much

  D.

  It was a problem with DTS investment by vRA. We have identified the problem and the fix will be available in the next version.

  Thank you

  Kumaran

• Satellite L550-117 - how to use VGA + HDMI at the same time?

  Hello
  I have a Satellite/Satellite L550 series Satellite L550 - 117.
  Can I use 2 monitors at the same time, using the function key (laptop screen + HDMI, VGA + HDMI, VGA, portable computer), but I would use "laptop screen", "VGA output" + "Output HDMI" at the same time (for example: to play a movie on an HD TV and work on the other two screens).
  I also want to play sounds on computer speakers 'and' an HDMI output, not the speakers for computer 'or' HDMI.

  Is it possible with this notebook and how?

  Thank you

  Hey Buddy,

  Good idea you have unfortunately it of not possible to use 3 monitors at the same time. You can use the internal monitor and an external monitor but not the two external monitors. This is not supported in the graphics card.

  Then, you use internal monitor, VGA connection or internal monitor + HDMI connection. That s what you can do.

• 15 n series Pavilion: Pavilion 15 computer n097sa laptop. L and R audio that passes through the two speakers at the same time.

  Hi, so basically, I just upgraded to this laptop 15 n097sa (new to me) of my old sucks, and it's so much better.
  Only, I just noticed that when his left or right is out at the same time the two speakers. I noticed you access with your headphones. the left certainly comes out the left a little more and the right thus respectively, but they always come out of two speakers much.
  To clarify that, the only left channel is coming from the two speakers at the same time, instead of just the left speaker. And similarly for the right channel.
  I only did a real test on youtube videos of stereo test, even I tested it on my old acer before, that came out of the correct speakers.
  I have a sound dts, no matter who is and it could be reduced to just change the settings, but I don't think that's it.
  Does anyone else have or had this problem too?
  I know I'm a sucker for pc, but please go steady on me, your.
  Win pro 8.1.

  will you please and thank you very much indeed, couch.

  Malygris1 wrote:

  Hi there @SofaQueue

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are having problems with the audio balance on your laptop, and I am happy to help you with this. First of all, I would say reinstall the audio driver.

  ETC.

  Let me know if you still have problems and view the details of what happens.

  I will mark it as resolved now. Very useful, thanks.
  What I found was the following: I have really no problem at all, it was the parameters of the audio DTS after all.
  Simply turn off the audio improvements and testing showed once again that's all it was.
  

  Thanks again though, nice to see people are willing to help so much!

  Edit: Is PS it OK to mark my answer as a solution? I don't care if or whatnot, it just is the right answer and makes sense. I'll do it if he lets me.

• Avoid to get two theards at the same time

  Hello

  I was wondering how to avoid to run two threads at the same time in teststand. When I using teststand, I found it can run two threads in simultaneity.for example, I can open a file sequence, using single-pass enter point to run a theard, when this theard is not finished, I use single-pass or TestUUTs enter point to run other theard. I want to avoid this case. Is there settings, we can get motor teststand to tell me a thread is running or not?

  Thank you!

  You write a custom user interface? If you use an application Manager (all the example user interfaces and the sequence editor to do), you can see:

  ApplicationManager.Executions.Count > 0

  If you use just the engine that you can keep the number of executions by increment your account upon receipt of the UIMsg_StartExecution UIMessage and reduce your number when UIMsg_EndExecution is received.

  If instead you want to determine the number of executions of a sequence running, you can use RunState.Engine.GetInternalOption () to get a reference to the Application Manager (at least of the UIS and the sequence editor that use an Application Manager) and then do the following ActiveX to get the Executions.Count property.

  Hope this helps,

  -Doug