Similar Questions

• Cannot use internet in desktop mode, but can in Windows 8 mode. Help?

  Hey having a lot of problem with Windows 8 Pro cannot use internet in desktop mode but can in Windows 8 mode?

  Hey having a lot of problem with Windows 8 Pro cannot use internet in desktop mode but can in Windows 8 mode?

  I found myself with the same issue - although, for me, everything was working and then stopped at random...

  Since there is no useable answer to your question here, I begin troubleshooting me...

  What I found was a simple enough solution which seemed to reset the internet connection in desktop mode:

  1. to reveal desktop mode from the menu of charms (roll mouse over the right side of the screen)

  2. Select the charm of "settings".

  3. Select 'Network' in the parameter options

  4. right click on the network, you're connected to, and then select "turn sharing enabled or disabled.

  5 turn on network sharing

  This should reset your internet settings and retrieve your desktop mode in the loop...

• I did an upgrade and now can't get past login screen

  I did an update of my Macbook Pro, non-unibody, running 10.8. ? by using the software update page.  It seemed it wasn't minor corrections to the drivers, but the Mavericks jump or what.

  Everything seems to work well and he did it again to the login screen.  Now it makes a loop on the login screen.  When I enter my login, it seems, it tries to connect but just returns to the login screen and my avatar.  If I enter an incorrect password, it is as it should be and shakes the password box, but when I enter the correct pass it's all gray, then black, then loops back to the login screen and my avatar.

  Help please?

  Bruce

  It would be useful that you have indicated the EXACT model/year of yoyr MBP.

  Reset the SMC and the NVRAM:

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  Try a safe boot:

  https://support.Apple.com/en-us/HT201262

  Any change?

  Ciao.

• How can I remove the email notification in the Windows 7 login screen?

  opening start screen

  When I turn on my computer at the beginning to start click on user name in my name says 464 emails unread how rectify this.

  Regards Mike Robson

  Glib answer: read your emails.

  Notification of "unread mail" on the Windows Home screen reflects information from several e-mail applications that can be installed on your computer, including at least, Outlook Express and Mozilla Thunderbird's.  Other messaging applications can also contribute to the total.

  If you click on the link, you are supposed to see what e-mail client has how many messages, but I have never actually confirmed this feature.

  See Presentation of the mail notification display on the Windows XP Welcome screen.

  You can completely disable this notification.  The link above the article explains how to change the registry, but the easiest is to download TweakUI for Windows XP.  For some reason, the Microsoft download link for this seems to be non-functional now, but you can get it here--> http://download.cnet.com/Tweak-UI/3000-2072_4-10002117.html

  After you install TweakUI, click on "Login" in the left pane, then "unread mail".

• How can I change the text at the bottom of the Windows Vista login screen?

  Hello
  I want to change the text at the bottom of the login screen (where it says 'Windows Vista '). Can I do this? If so, how?

  Hello

  the text is stored as a bitmap inside the Basebrd.dll. Use tools like Anolis.Resourcer or ResHacker to replace the bitmap image.

  André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• When I log into Windows, the login screen does not appear, how can I fix?

  I am running Windows XP Professional.  When I start my computer, it works fine.  I can log on and have no problem.  Unfortunately, when I log into my profile, Windows logon screen does not appear.  I use the log on screen where you have to manually type your user name and password.  The HP wallpaper happens, but the log in box does not work.  Better yet, it is not always the case.  I logged on and outside several times without any problems to come back later and find the log in box missing.  The only way I can solve the problem is to manually shut down the computer using the power button then restarting him.  I have no idea why this is happening or how I can fix this problem.  Any ideas?

  Hello

  I suggest you try the steps in the following Microsoft KB article and check if it helps.

  How to turn on automatic logon in Windows XP

  http://support.Microsoft.com/kb/315231

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  It will be useful.

• How to fix my computer laptop vaio to restart so I can get to the login screen my sceen is the Windows Boot Manager screen, and I don't have a disk so how can I solve this without disc

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=1, 24,26,66,9,70,5,72

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I change the login screen to validate the results of the quiz on a local server?

  A lot of people looking for an answer to this question. You know someone solve this problem? At least, I need to change the screen to connect to my local language text. Thank you very much for the help.

  Hi Martin,

  These are run time messages and you can replace it by following this procedure:

  If you want to change specific labels that you cannot change through Captivate, you can do this with the strings.txtfile, which is located in the folder of instalation Adobe Captivate > en_US

  1 open the file

  2. change any label you want

  3. record.

  4 rename in strings.zdct

  5. replace the original strings.zdct file

  6. restart Captivate

  I suggest you original strings.zdct and strings.txt backup - just in case files.

  Kind regards

  MILIN

• Cannot connect google mail, problems with the new google login screen

  After putting my mail, im asked the password, I put it, but it of not open a session and gets stuck it
  I'm using Firefox for Linux (x 64)

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

  Use this link to make sure your plugins are up-to-date.
  If all are listed as unknown or research, don't worry to their topic.

• Samsung NC-240 - Windows 7 with VMware View connection problem

  Hi all

  My Samsung NC-240 is set to connect to my server VMware View Connection Manager. I can connect to one of my Windows XP via PCoIP or RDP virtual desktop very well, but I can't connect to my virtual Windows 7 desktop. Whenever I try to connect, it will be wrong and tell them "Session Lost!"

  Research in the NC-240 event log, I see the following:

  11 d, 00:01:09.260 > ready to connect to the host

  11 d, 00:01:21.990 > connection to the host (10.3.70.110, 00-00-00-00-00-00)

  11 d, 00:01:22.020 > using resolution 1920 x 1080 at 60 Hz on DVI port 0

  11 d, 00:01:22.150 > CONNECTED (10.3.70.110, 00-00-00-00-00-00)

  11 d, 00:01:22.160 > receiving power state updated: S0

  11 d, 00:01:22.960 > CURRENT SESSION

  11 d, 00:01:23.600 > (MGMT_RDP): invalid capability length (20)

  11 d, 00:01:23.600 > connection down (RDP protocol error detected)

  11 d, 00:01:23.680 > lost Session!

  11 d, 00:01:23.680 > (MGMT_RDP): INIT: received unknown event 0 x 20!

  Here is the information of the current version of my NC-240:

  Part number of the firmware: FW010034

  Hardware version:

  Firmware Version: 3.0

  Firmware Build ID: v250

  Firmware version Date: December 7, 2009 15:55:15

  PCoIP processor revision: 1.0

  Bootloader Version: 2.1

  Bootloader version identifier: v163

  Bootloader Build Date: August 28, 2008 16:56:13

  Here is the information of the current version of my Agent and VMware View VCM:

  VMware View 4.0.0 - 210939

  I appreciate any input.

  Thank you

  Sang A

  I think it's the same than P20 then try wyse page

• How to start to use the Oracle client to access the database?

  People,
  
  Hello. I just installed Oracle Client (Instant Client) in the directory/home/myOracle/Oracle_Client.
  But I don't know how to start and configure the client to access Oracle database.
  
  Can all folk tell me how to start to use the Oracle client to access the database?

  user8860348 wrote:
  People,

  Hello. I've successfully used Oracle SQL Developer. But I want to know how to use the Instant Client.

  Can any folk tell me how to use the Client then just install it?

  I guess you're hurting understand the definition of Client instant, there isn't a tool or application or tool GUI as a sql developer or another that you can start using. It's just client installed with the minimum characteristics
  If you want to use the right application tool install sql developer in your instant client or simply running sqlplus

  See you soon

• I can't access my home screen and the fast user switching!

  I get an error message when I try to change the way I connect
  "client services for NetWare has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the Client Services for NetWare. "
  What is NetWare? Where is he? I don't find it on my program list to remove it! Help!

  To resolve this issue, follow these steps. NOTE: If you rely on access to a Novell network and need the Client Service for Netware or the Novell Client, you cannot use the home screen or fast Windows XP user switching features.

  1. If you are using the Novell Client, see the following Web site for instructions on how to uninstall Novell support:
     http://support.Novell.com (http://support.novell.com/)
  2. If you are using the classic view in Control Panel, double-click network connections. If you are using the category view, click on network connections and Internetand then click on network connections.
  3. Right-click each connection that you have, and then click Properties each time.
  4. Under the tab general in each Local network connection, select the Client Service for Netware, and then click Uninstall.
  5. In the Dial-up connection properties dialog box, click the Networking tab, highlight the Client Service for Netwareand then click Uninstall.
  6. Restart the computer.
  7. Open Control Panel, and then double-click user accounts.
  8. Under pick a task..., click on change the way users log on or off the power.
  9. Click to select the opening and closing of session options you want: use of the Welcome screen or use quick user change.

• If 2 Airport extreme can stay connected to each other using their LAN ports?

  Hello friends,

  I would like to know if 2 Airport extreme or 1 Airport Extreme and Airport Express can stay connected to each other using LAN ports at the ends? I thought this is the LAN port 1 connected to the WAN port on the 2nd.

  Thank you

  To clarify the issue and the scenario, one of my friend described a typical scenario in which there are 2 AEs. AE1 has an ISP in its port WAN and AE2 has a different ISP in its WAN port. This 2 AE can mutually connected between them by using ports LAN AE1 and AE2 ethernet cable? He said this could be feasible if AE2 remained in bridged mode, without using the ISP attached to its WAN port. I just don't get how this is possible. Friends of the search help.

  Thank you

• Can not connect using vCenter Orchestrator Client

  I use the 5.5.1.0 version. The client used to connect successfully to the server. But recently, he can't. When I clicked on "Login", it displays "Login, please wait...". "for about 1 minute, then alerts in red, as shown below. I wonder what a network/firewall issue. Could you please help to propose a solution?

  

  Make sure that 8287 and 8286 ports are not blocked by a firewall.

• You must use view client for windows to access view server connection"

  When I go to my security on the outside, I get a message in 5.1, but 5.0 would simply run the installation of the client.  Is this new 5.1?  "You must use view client for windows to access the server view connection."

  Well Yes new feature. Is VMware view Client unbundling

  Take a look at

  http://www.VMware.com/files/PDF/view/VMware-view-evaluators-Guide.PDF

  from pg 87

  On page 88, he says

  Portal of the view on the login server see the landing Page

  The URL root view connection server is hosting a view portal or download customer portal, as the default value, the destination page. The page contains instructions to launch an existing customer of the view and a link to a download page to the VMware.com website that contains a client compatible with the detected operating system version.

  The portal of the view is more directly initiates a Client installation view, but instead allows the user to manually call the installation process.