User-defined project status

Similar Questions

• Task to the mapping of object status: is it possible to have user-defined status?

  Hi guru.

  'Task of object state Mapping' tab for the definition of the process allows you to set the "status of the object' to 'status '.

  'Status of the object' contains values defined on "Definition of the State" for defined object "resource". It is possible to extend this list by adding user-defined status. But the allocation of these statutes (for example, 'view data name updated') for status (say, 'C', finished) it causes a corresponding Bundle error is found.

  How is it possible to use the user defined the statutes?

  Hello

  These statutes are pre-defined and shipped by the IOM.

  You cannot change C-> etc. put into service.

  ~ J

• Sharing Variables defined by the user through projects

  Hello

  I wonder if it is possible to share Variables defined by the user between projects. What I have in mind, is that I would like to have my user defined Variables configured in a central location and then insert them into my projects as variables bound so that they update automatically when I change their values. For example, I define a variable named ProductVersion , that has the value 9. Then I insert this variable in all my projects as a bound variable. After 2 months the product version changes was 10, so I change the value of the variable at 10 to the place where it is stored and it is automatically updated in all projects. Is it possible somehow? I'm new to RoboHelp and I find no answer. I tried the solution for a while using the product on the Internet without success. I even contacted Adobe Support and they redirect me to this forum I used help and manual before and how they deal with user variables was quite simple.

  Hello

  Unfortunately RoboHelp does not offer a way to let this, at least, is not directly.

  However, I think I found a way to get there, the variables are stored in a file named rhvariable.apj. So what you could do is to add this file as a file of luggage to each of your projects that will share variables.

  Now, you would create a shared location, but also a new category in your resource manager. This will create a common location to store the file apj.

  Add the file of baggage to the location. Repeat for all the projects that share variables.

  Now, when the variable is changed in any of the project participants, it should be to update the shared location and you can achieve the goal.

  Note, however, that although you'll get what you want, it will be always open each of the participating projects, synchronize the APJ file and generate the output in order to to refresh all. No way, I am aware of escape that.

  Cheers, Rick

• Aid for the creation of the projected CRS user-defined application

  Hello
  
  I am creating a CRS in Oracle Spatial to the Transverse of Mercator (3MC) 3 degrees projection system, which is widely used in Canada Alerta.
  
  This projection is based on UTM with NAD83, but uses 3 degrees for the width of the box instead of 6 degrees. The Central meridians to 114. The scale factor at the central meridian is 0.9999 and there is no category or the fictitious ordered. Scope (-200000,5450000) to (225000,6150000)
  
  Y does it can someone help me please on this issue? It is very much appreciated if you can create the script for defination projection and covert of longitude and latitude.
  
  Thanks in advance!
  Jerry
  
  Published by: user11307677 on June 26, 2009 13:58

  SRID 999989 will work for you?

  999989
  PROJCS ["Edmonton Transverse of Mercator", GEOGCS ["NAD83 (CSRS98)", REFERENCE ["NAD83 Canadian spatial reference"]]]
  [[Conference system (EPSG ID 6140)", SPHEROID [translation]"GRS 1980 (EPSG ID 7019)"6378137.0, 298.257222101]], the FIRST
  [M ['Greenwich', 0.000000] UNIT ['decimal degrees', 0.0174532925199433]], ["transverse M of PROJECTION
  ercator'], ['Latitude_Of_Origin', 0.0] PARAMETER, PARAMETER ['Central_Meridian',-114.0], PARAMETER
  ["Scale_Factor" 0.9999], PARAMETER ['False_Easting', 0.0], ['False_Northing', 0.0] PARAMETER, UNIT
  ['Meter', 1.0]]

• Question of the user defined Type (UDT)

  Hello

  The attached file is NEITHER sample to call a VB6 vi.

  The following is declared in the declaration section:

  ' Global declarations
  Dim lvapp As LabVIEW.Application
  Dim vi LabVIEW.VirtualInstrument

  When I paste these statement in another project (that I'm working on), I get an error 'undefined user-defined type '.

  Can someone point out to me were in the sample, these type definitions are declared?

  Thank you

  Rafi

  PS the attachment is indeed xxx.rar and not xxx.zip.  I changed the name because .rar has not been accepted.  Please rename .rar

  Thank you

  I forgot to mark references to my project

  Project--> references--> LabView. Type library of xxx

  Thank you

• 9144 with FPGA and SGL EtherCAT custom user-defined Variables?

  Hello

  I currently have a small instrument driver (rs485) running on a chassis of 9144. The output values are communicated to the master EtherCAT using FXP numbers. I would like to pass these FXP to SGL, since I've upgraded to SP1 2012 LV with FPGA now supports numbers of SGL.

  Is this possible? I tried several times to create the Variables defined by the user of SGL in the project, but the date type is gray.

  Greetings from Munich,

  Götz

  Unfortunately, SGL is not a data type supported for communication to and from a 9144. The types of data available for the I/O user-defined variables are:

  * Fixed point
  * Signed integers (Int8, Int16, Int32, Int64)
  * Integers (UInt8, UInt16, UInt32, UInt64)
  * 32 bit field
  * Boolean

  More information on I/O user-defined variables can be found at:

  Programming EtherCAT i/o with FPGA Intelligence to: Differences in LabVIEW FPGA programming API
  http://www.NI.com/white-paper/10618/en#toc4

• Extracts & user defined Variables

  After ~ 5 years not working not with any what HAT, I started a new post on 28/03/2016 and put back the trial HR 2015 a spin. I'm very excited by what I see and were able to do so far.

  I have 3 'entities' to write and I created 3 pages, one page per entity.

  Each of these presentation pages, I have this first line:

  |

  This section describes how to enter and manage [entity].

  |

  I set each [entity] as a user-defined variable. Each page with this sentence I hard-coded and added a reference to the user defined Variable and then produced output. Works great.

  Now, I'm going 'down' a level. What I want to know is how to

  |

  "This section describes how enter and manage."

  |

  be a code snippet. I want it to be an excerpt because when I write a sentence better, I don't have to make the same change on each of these presentation pages. Finally, there are 19 pages of presentation.

  
  

  Anyone who structure their content like this?

  
  

  What I want to avoid doing several manual changes. For example, if the following examples have been in a RoboHelp project, on https://support.assessment.pearson.com/x/N4Dy, there is this sentence:

  
  

  This section shows you how to manage user accounts.

  
  

  On this page - support to manage test paper - next to PearsonAccess online User Guide - Pearson Assessment - it is this sentence:

  
  

  This section covers all the unique aspects of the test paper.

  
  

  What I'm trying to do, is to have an extract which is defined as:

  
  

  This section tells you how to

  
  

  and refer to it on both pages.

  On the first page, it looks like

  from <>this section tells you how to< / endSnippet >

  user accounts < beginUserDefinedVariable >< / endUserDefinedVariable >.

  Then on the second page, I would say this:

  extract < code > This section tells you how to < / endSnippet >

  < beginUserDefinedVariable > manage paper test < / endUserDefinedVariable >.

  |

  The reason why I want it as a snippet of code is because I don't want to have to maintain "this section tells you how to" text hardcoded on each of these presentation pages. I would like to take advantage of the functionality of content reuse to avoid a bunch of copy / paste or even find / replace.

  Thanks for any help!

  Paul Hanson

  RoboHelp MVP of looonnngggg a long time ago...

  But what you might want to consider, is another variable to contain the desired text in the code snippet. This could be inserted inline. Then update you only in the variable.

  Just thinking out loud a bit.

  See you soon... Rick

• RH6: User Defined Variable: how to change?

  QUESTION
  Is it possible to change the value of a variable that is defined by the user in RoboHelp 6? If so, please describe.
  
  QUESTION
  After you change a RoboHelp project, I want to update the value of a user-defined variable, but I don't see any way to do this.
  
  BACKGROUND
  My PC is under Win XP SP2. I use RoboHelp 6 to create a HTML Manual. I have several subjects; each topic has its own model. A common feature of each model is a version number. I inserted a variable defined by the user to the version number in each model. RoboHelp pushed successfully this version number to all my subjects.

  If you double-click on the user defined Variable in the project manager, you can change the default value here. I think what you want but is a different value for different generations. In the first page of the wizard when you build there is a button of Variables, you can change it there is for this build.

  You can create different configurations for different versions and each will retain its own value. Craig Clarke wrote an article on what will soon be published on the Adobe site. Hope this helps until then as I know that Craig, who has more knowledge of this area, is currently on holiday.

• When I print my paper to "user-defined" size in Thunderbird by default instead of "letter". Have to change manually, but does not.

  I use a printer Brother HL-6180DW and the paper size to default printer to 'letter' 8 1/2 x 11 on everything, except
  When you try to print an email from Thunderbird. If I manually change the paper size in Thunderbird to the letter, it maintains for that impression, then default to "user-defined" which is 3.0 x 5.0. How to make the default format letter? Thank you.

  I have answered hundreds of posts here every month. Most of the time I don't know who or what 5 seconds after I'm done.

  I did not add... I said to delete. You can remove all in printers and when you restart Thunderbird and try and print with the selected printer is the will add stuff if needed. So bite the bullet and simply delete away.

• Use of user defined function in mathscript containing a structure

  Hi, I am a novice user of LabView MathScript module,

  I have the following problem when integrating my code MATLAB, LabView, for HMM: in my program, I tried to call a MATLAB called "mixgaussinit.m" user-defined function, it shows this error...

  "

  I just noticed that these files appear to be copyrighted. My first question is do you have author permissions to post them in a public forum? If this isn't the case, then you can remove them. That being said, I have reviewed the code and it seems easy enough to work around your problems (provided that you have the copyright permissions). How to bypass the problems is to replace the fields of the struct with variables. There is of course allows you to change some definitions of functions for input and output the necessary variables which I think was the best 5 variables. You will also need to redo the code that uses a table of error checking cell. In total, I estimated about 30 minutes of work. I would have given you work around these files had not been protected by copyright. So, unfortunately, you will need to implement the work around you.

• variables of user-defined data transfer

  Hello

  I use the etherCAT 9144 chassis and is only supported by this hardware FIFO range target. After a search, I realized that the only way to transfer data from FPGA to the host by using user-defined variables. But these variables do not support the notion of FIFO. So which is the best practice to transfer data after measures (provable 10 Hz measurement of 15 values) to host VI?

  Thank you

  As mentioned, the 9144 only supports the analytical engine.

  In regards to what you do, it really depends on the entire application. For example, what is the master? Are there other systems at issue here? Etc. It's a good read, in general, although it might not help this second right: http://www.ni.com/white-paper/14151/en/

  A high level, you need to decide what you need. If you have need for deterministic communication, low-latency over long distances from a RT controller, the 9144 is probably the right choice. If you need low latency + streaming over short distances to a RT controller, you should look into the RIO MXI chassis. If you need mainly not deterministic low speed (10 hz) data mixed with low flow continuous over long distances to a windows or host RT, then ethernet expansion rio (9146,7,8,9) is probably the right choice. If you need high speed continuous with low control latency over long distances to a windows or RT host, you need a full cRIO controller. Based on what you've posted so far, its uncertain is the right person.

  Lets say you're stuck with the 9144 for now. As you can easily hit 1 kHz scanning cycles, it should be perfectly possible to data 'stream' to 10 Hz. If you run the scan at 1 kHz engine, then you are 100 x oversampling. Where it gets complicated is this requirement of sync. By default, acquisition input/output is synchronized to the clock of the scan (and you can see when the clock of scan is set by a knot of e/s FPGA). However, you can take complete control of a module in the FPGA and read inputs and outputs at any time if you please. In other words, you can set up so when DIO0 goes high you immediately enjoy all the values of AI 15. You can then transfer these values HAVE switched to the host using the user-defined variables.

• User Defined King

  Hello Experts!

  I have a simple question.

  Is there a way, of creating user defined KING?

  For example, I want to create a return on investment, such as:

  Hello

  Yes and no. You can combine this KING of three kings of base: two lines and a circle (or ring). Movement will be a little tricky (because all three kings should be moved together with the movement of the mouse) - you need to do programmatically. ("Point of departure") example as an attachment. Think otherwise maybe twice - it will be easier to use single point KING with overlay instead of several Kings.

  Andrey.

• What are user defined variables (UDV)?

  I'm trying to debug an application in real time and have worked on known issues for LabVIEW Real-time 2011. There is a term called "user defined Variables (UDV)" that opens occationally document known issues with other documents. It seems that UDVs can be created under target FPGA but I am unable to find any useful information on them. I know only local, global, shared, single, variable IO process.

  Hi Lucie,.

  The /o Variables using the help documentation gives a pretty good explanation of what a user-defined variable is in the section "data i/o Variables for Custom FPGA of e/s". I hope that this documentation helps!

  Best,

  tannerite

• MS Intellimouse Explorer 2.0 has user programmable buttons, but this mouse is very hard to find. Is there an another wireless mouse which has programmable buttons user-defined?

  MS Intellimouse Explorer 2.0 has user programmable buttons, but this mouse is very hard to find. Is there an another wireless mouse which has programmable buttons user-defined?

  Thank you

  OOPS - I just read the description of the site and realize that this is the wrong forum for my questions.

  I'm sorry.

• How to set 'User defined' palette display IMAQ?

  When I select the "User defined" palette on the screen, it shows just the regular grayscale palette.  I want to replace that with the palette 'Rainbow' but slightly amended in the range.  How can I do this?

  Thank you!

  MK

  Wire a new array of RGBs 256 elements to the User Palette of your image window property.  You can use IMAQ GetPalette to retrieve the rainbow palette and change that.