User-defined sorting matrix

Similar Questions

• User-defined function removes the expression hooks

  Trying to convert this column in a user function expression, however when I apply the function to the user hooks literally disappear.

  1 REGEXP_REPLACE (SRC_IO_PHONES_A.PHONE, ' ({: digit:{3})\.(:digit:{3})\.(:digit:{4})' 1 (\1)-\2-\3'),)

  2 REGEXP_REPLACE (SRC_IO_PHONES_A.PHONE, ' ([[: digit:]] {3})------.) () [[: digit:]] {3}). ([[: digit:]] {4})' 1 (\1)-\2-\3')

  
  

  These lines come from the same mapping. One implements the user-defined function and the second line is with I plug the code into the target Expression field.

  
  

  Any thoughts on why this is?

  
  

  Thank you
  

  So I thought to it thanks to a post of @oraclebase.  Another friend of mine has indicated that user in ODI functions develops a sort of pseudo-code and it is not really passing commands to the database.  Anyway, my research turned to substitute for the construction of all [: digit:].  This resulted in me find the above post where \d = [0-9].  By replacing all the scoring by \d hooks, the function worked.

• Variable user defined appear as not defined in CHM and webhelp

  I have my RoboHelp files to source code control. Recently, our administrator made a copy of my help topics and places in a different folder in TFS. Now when I create webhelp or compiled MS HTML help, the user defined variables appear as being undefined in aid. When I visualize in RoboHelp well, they look like they do in the Viewer. It's only when aid is being built that these variables are somehow lost. Is there some required files that maybe did not move in the source code control? I supported my previous files and these work very well.

  I corrected sort myself, but I will post the solution in case anyone else runs into this error.

  I added a new variable that I named 'Test '. I added a new text and each of my variables defined by the user inserted in this text, including the new. I saved the topic and recompiled. The variables now appear correctly. Go figure.

• When I print my paper to "user-defined" size in Thunderbird by default instead of "letter". Have to change manually, but does not.

  I use a printer Brother HL-6180DW and the paper size to default printer to 'letter' 8 1/2 x 11 on everything, except
  When you try to print an email from Thunderbird. If I manually change the paper size in Thunderbird to the letter, it maintains for that impression, then default to "user-defined" which is 3.0 x 5.0. How to make the default format letter? Thank you.

  I have answered hundreds of posts here every month. Most of the time I don't know who or what 5 seconds after I'm done.

  I did not add... I said to delete. You can remove all in printers and when you restart Thunderbird and try and print with the selected printer is the will add stuff if needed. So bite the bullet and simply delete away.

• Question of the user defined Type (UDT)

  Hello

  The attached file is NEITHER sample to call a VB6 vi.

  The following is declared in the declaration section:

  ' Global declarations
  Dim lvapp As LabVIEW.Application
  Dim vi LabVIEW.VirtualInstrument

  When I paste these statement in another project (that I'm working on), I get an error 'undefined user-defined type '.

  Can someone point out to me were in the sample, these type definitions are declared?

  Thank you

  Rafi

  PS the attachment is indeed xxx.rar and not xxx.zip.  I changed the name because .rar has not been accepted.  Please rename .rar

  Thank you

  I forgot to mark references to my project

  Project--> references--> LabView. Type library of xxx

  Thank you

• Use of user defined function in mathscript containing a structure

  Hi, I am a novice user of LabView MathScript module,

  I have the following problem when integrating my code MATLAB, LabView, for HMM: in my program, I tried to call a MATLAB called "mixgaussinit.m" user-defined function, it shows this error...

  "

  I just noticed that these files appear to be copyrighted. My first question is do you have author permissions to post them in a public forum? If this isn't the case, then you can remove them. That being said, I have reviewed the code and it seems easy enough to work around your problems (provided that you have the copyright permissions). How to bypass the problems is to replace the fields of the struct with variables. There is of course allows you to change some definitions of functions for input and output the necessary variables which I think was the best 5 variables. You will also need to redo the code that uses a table of error checking cell. In total, I estimated about 30 minutes of work. I would have given you work around these files had not been protected by copyright. So, unfortunately, you will need to implement the work around you.

• variables of user-defined data transfer

  Hello

  I use the etherCAT 9144 chassis and is only supported by this hardware FIFO range target. After a search, I realized that the only way to transfer data from FPGA to the host by using user-defined variables. But these variables do not support the notion of FIFO. So which is the best practice to transfer data after measures (provable 10 Hz measurement of 15 values) to host VI?

  Thank you

  As mentioned, the 9144 only supports the analytical engine.

  In regards to what you do, it really depends on the entire application. For example, what is the master? Are there other systems at issue here? Etc. It's a good read, in general, although it might not help this second right: http://www.ni.com/white-paper/14151/en/

  A high level, you need to decide what you need. If you have need for deterministic communication, low-latency over long distances from a RT controller, the 9144 is probably the right choice. If you need low latency + streaming over short distances to a RT controller, you should look into the RIO MXI chassis. If you need mainly not deterministic low speed (10 hz) data mixed with low flow continuous over long distances to a windows or host RT, then ethernet expansion rio (9146,7,8,9) is probably the right choice. If you need high speed continuous with low control latency over long distances to a windows or RT host, you need a full cRIO controller. Based on what you've posted so far, its uncertain is the right person.

  Lets say you're stuck with the 9144 for now. As you can easily hit 1 kHz scanning cycles, it should be perfectly possible to data 'stream' to 10 Hz. If you run the scan at 1 kHz engine, then you are 100 x oversampling. Where it gets complicated is this requirement of sync. By default, acquisition input/output is synchronized to the clock of the scan (and you can see when the clock of scan is set by a knot of e/s FPGA). However, you can take complete control of a module in the FPGA and read inputs and outputs at any time if you please. In other words, you can set up so when DIO0 goes high you immediately enjoy all the values of AI 15. You can then transfer these values HAVE switched to the host using the user-defined variables.

• 9144 with FPGA and SGL EtherCAT custom user-defined Variables?

  Hello

  I currently have a small instrument driver (rs485) running on a chassis of 9144. The output values are communicated to the master EtherCAT using FXP numbers. I would like to pass these FXP to SGL, since I've upgraded to SP1 2012 LV with FPGA now supports numbers of SGL.

  Is this possible? I tried several times to create the Variables defined by the user of SGL in the project, but the date type is gray.

  Greetings from Munich,

  Götz

  Unfortunately, SGL is not a data type supported for communication to and from a 9144. The types of data available for the I/O user-defined variables are:

  * Fixed point
  * Signed integers (Int8, Int16, Int32, Int64)
  * Integers (UInt8, UInt16, UInt32, UInt64)
  * 32 bit field
  * Boolean

  More information on I/O user-defined variables can be found at:

  Programming EtherCAT i/o with FPGA Intelligence to: Differences in LabVIEW FPGA programming API
  http://www.NI.com/white-paper/10618/en#toc4

• User Defined King

  Hello Experts!

  I have a simple question.

  Is there a way, of creating user defined KING?

  For example, I want to create a return on investment, such as:

  Hello

  Yes and no. You can combine this KING of three kings of base: two lines and a circle (or ring). Movement will be a little tricky (because all three kings should be moved together with the movement of the mouse) - you need to do programmatically. ("Point of departure") example as an attachment. Think otherwise maybe twice - it will be easier to use single point KING with overlay instead of several Kings.

  Andrey.

• What are user defined variables (UDV)?

  I'm trying to debug an application in real time and have worked on known issues for LabVIEW Real-time 2011. There is a term called "user defined Variables (UDV)" that opens occationally document known issues with other documents. It seems that UDVs can be created under target FPGA but I am unable to find any useful information on them. I know only local, global, shared, single, variable IO process.

  Hi Lucie,.

  The /o Variables using the help documentation gives a pretty good explanation of what a user-defined variable is in the section "data i/o Variables for Custom FPGA of e/s". I hope that this documentation helps!

  Best,

  tannerite

• MS Intellimouse Explorer 2.0 has user programmable buttons, but this mouse is very hard to find. Is there an another wireless mouse which has programmable buttons user-defined?

  MS Intellimouse Explorer 2.0 has user programmable buttons, but this mouse is very hard to find. Is there an another wireless mouse which has programmable buttons user-defined?

  Thank you

  OOPS - I just read the description of the site and realize that this is the wrong forum for my questions.

  I'm sorry.

• How to set 'User defined' palette display IMAQ?

  When I select the "User defined" palette on the screen, it shows just the regular grayscale palette.  I want to replace that with the palette 'Rainbow' but slightly amended in the range.  How can I do this?

  Thank you!

  MK

  Wire a new array of RGBs 256 elements to the User Palette of your image window property.  You can use IMAQ GetPalette to retrieve the rainbow palette and change that.

  

• How to create a user-defined Service

  Hello

  The Microsoft article "How to create a User-Defined Service" is very explicit. I understood how to deploy a file .exe as a windows service. But my executable creates and writes a .txt file that I do not see that appear when I starts the service. I have to do something special?

  Thanks in advance, supertreta.

  I found the answer: she was on C:\WINDOWS\system32. Sorry for my precipitate question.

• How to create a user-defined function?

  is there a substitute for the exe instsrv and srvany in Vista?

  I don't know what means your post, so here's how to create a user-defined function:
  1) click Start
  (2) select "Control Panel".
  (3) select "system and maintenance".
  4) click on "Administrative Tools".
  5) click on "Task Scheduler."
  (6) click on "create task" (right in the list pane under) "Actions") "
  "(7) opened in the general tab it will choose if it only works when the account that is used to implement is connected, or ' if that user is logged in or not" (leave the box ' do not store the... "empty password)
  (8) always in the general tab, check the box 'run with highest privileges '. (This will ensure that no program can block)
  (9) type a name for the task (in the general tab)
  (10) to set the job to run an awhile, use the "triggers" tab, if you want to set a task runs after xx min. temps_inactivite, choose the 'conditions' tab, then choose the desired time.
  (12) click on the 'actions' tab click on 'new '. in the program/script line, search for and select the program you want to run, and then click Open.
  13) click OK in the window "create a task".
  14) click OK again and you are done.
  I hope this helps.

• U330 "utility user-defined" in touch sensitive bar

  Hey guys,.

  I just got my u330 and I love it so far!  I have a question that I'm sure someone out there has already found.  When I installed first the bar touch sensitive, I set the user-defined button to open Firefox.   Works very well.  However, I would like to change to open a different program now.  I looked into these deep enough forums, google Saad, all with the same result... No...

  Help!  Thank you

  of

  Try this: Program Files--> Lenovo--> energy--> start_utility.exe management