Variable user defined appear as not defined in CHM and webhelp

Similar Questions

• My HP printer appears as "not specified" in devices and printers

  Original title: why my HP printer appears as "not specified" in printers and devices?

  Running Windows 7 64 and my computer detect my printer as "unspecified" material under devices and printers, so I'm unable to verify as my default printer.  How can I fix?  Thanks to all those who can help you.

  Sounds like you just pluged in it and has not installed software complete features of HP, which is if your unknown HP printer supports win7

• Why are my tool fill and sign not appearing is not on the bar and how do I solve this problem.

  Why are my tool fill and sign not appearing is not on the bar and how do I solve this problem.

  Salvation;

  What version of Acrobat or Reader are you using?  When you open the form are the fields highlighted and "complete" without clicking the 'Fill & Sign' tool to open the bar fill tools & sign?

  I suspect that the form that you opened is already ' to fill' so the fill tool & sign just offers you the possibility to sign the PDF and all filling out forms is managed the the Acrobat/Reader native app.  In the view below, I opened a 'Acroform' which is a PDF file that has form fields to fill and so the bar fill tools & sign has only 'Sign' button - it's what you see?

  

  'Fill & sign' tools are to fill PDF documents that have no form fields real (they are flat and not fillable) and is able to add text fields, annotations and signatures for the "flat" PDF

  Thank you

  Josh

• Plug-ins appearing does not in the effects and Preset window

  Hello

  I have a few plugins that do not appear on the effects & Preset window or the Menu effects.

  I was doing some examples from an old book of AE training.  The examples used the classic PS decision-making in and THE classic PS Plugin.

  In the window of Effecrts control the card to appear as "CC PS classic (obsolete)" and "PS CC THE (obsolete) Classic.  These two are particle systems.

  When I type in CC PS classic or classic or just CC in the effects & Presets window search bar, none of these effects occurs, even if they are available and work in the project and in the effect control window.

  I find the plugins in my plug ins folder.  They are listed as PSCLassic.plugin and PSLECLassic.plugin.  The path is: Applications/Adobe After Effects CS4 / Plug - ins / effects / CycoreFX

  Why then I call them upward in the effects window and presets and why they don't appear in the menu effects?

  Another my thought has been that they changed the name in the tutorial, but don't think that this is the case.

  This leads to a second Question.  How can you find the ' real/real name' of a plug in if you gave a different name in the effects control window.

  Some effects installed with After Effects are outdated, which means that plug-ins are installed and can be used by the old projects that have been created with these plug-ins, but they cannot apply again in the effect menu or Panel effects & presets. It's normal. That's how we pull the old plug-ins without breaking old projects.

• New user account appearing is not in Windows Explorer (Windows 7)

  I just got my reset of the HP laptop and I'm trying to set up a new account, I followed the procedure, but my new account does not appear in the list of users under Windows Explorer. only one generic user appears.

  When you create a new user account in Windows 7, it prepares the system for the new profile, but does not create records.

  User files are only created when a new user connects to Windows first. While Windows creates the folder structure for the new user, you will see the text in preparing your desktop on the Welcome screen. That's why the first connection to a new user profile takes a little longer than usual.

  So to see a new user profile folders in Explorer you should first user or disconnection of the account used to create the new user, and then connect to the new user profile.

• Alarming - alarms defined by the user not appearing is not in history

  Hello

  I use the DSC module to create alarms.  I can successfully configure an alarm for a shared variable.  I use the alarms.vi of reading to read the current alarms.   I am able to recognize and to disappear which removes them from the list.  I also see a history of them when using the "alarm and event Query.vi.  Now, I do the same with user-defined alarms.  I have created alarm using the "user defined Alarm.vi value.  The alarm are displayed in the list (read alarms.vi).  I can acknowledge the alarm and it disappears from the list.  Now when I use the 'alarm & Query.vi' the user defined alarm does not appear in the list.  Only shared variable alarms are displayed.  Is this correct?  Is there a good example of what I'm doing?  The example of "User defined DSC alarms Demo.vi" does not give an example of reading historical alarms defined by the user of the database.

  Thank you

  Matt

  I removed the DSC module and re-installed which includes SQL Server.  That did the trick.

  Thanks for your help Caleb

• Addition of registered symbols and TM for user-defined Variables

  Is it possible to add nurses or symbols marks to the value of the User Defined variable? All our help files are single originating in 2 or more brands of products, so I'm excited about this new feature RH7 (I upgraded x 5). But if I can't add these symbols, then this function is also useful for me as the new logo of HR.

  Hi Eilan

  I just tried a unicode character and it seems to work both webhelp and CHMS very well.

  I went to start. Run and enter "charmap". Selected a symbol and it is entered as the value of the variable. In the variable dialog box, it appeared like a square, but HR, it displays correctly in the WYSIWYG editor, preview, webhelp and in a CHM.

  The fact that the symbol is not correctly displayed in the list of variables can be overcome by a skilful titration of the variable.

  And what is the problem with the logo? :-)

• Variables, FPGA, defined by the user and SoftMotion 2012 + NOR 9505

  Hello

  To http://forums.ni.com/t5/Motion-Control-and-Motor-Drives/Softmotion-and-NI-950X-Module-Compatibility/... Nathan says:

  NathanK wrote:

  The glue code that connects Softmotion on FPGA LV code RT is called 'the axis interface. The version of the interface of the 2011 Softmotion axis necessary creation screw RT that exposes certain capabilities to Softmotion.

  ....

  Improvements have been made in 2012 Softmotion who has removed the requirement to write RT live. Disclosure for the FPGA happens rather on the Variables (UDVs) user-defined. It is also possible to create a kind of axis 9501 for configuration of the module as well as an axis UDV generic for other completely custom 950 x modules or axes. It is not a specific example for the 9505 yet.

  This caught my attention, as I'm trying to develop a system using LabVIEW SoftMotion 2012 and the NI 9505. I'm curious to see if there are alternative methods to write my application.

  Where can I find more information on this 'generic UDV axis' and how to implement a? Nathan says "is not a specific example for the 9505 yet", but there are examples for the other modules - how similar/different are these modules from the 9505, and it involves a lot of effort to bring examples of the 9505?

  Thank you!

  Hi JKSH,

  I have some relevant information that it is request that may be useful:

  Working with Axes Variable defined by the user (NI SoftMotion Module)

  Resource binding dialog box (NI SoftMotion)

  Configuration OR SoftMotion Axes (OR SoftMotion Module)

  Example that mentions of Nathan is the drive Stepper (9501) .lvproj (material Input and Output"Motion Control" NI SoftMotion"Device Specific" NI 950 x"OR 9501), I would take a peek at this on use of the UDVs.

• variables of user-defined data transfer

  Hello

  I use the etherCAT 9144 chassis and is only supported by this hardware FIFO range target. After a search, I realized that the only way to transfer data from FPGA to the host by using user-defined variables. But these variables do not support the notion of FIFO. So which is the best practice to transfer data after measures (provable 10 Hz measurement of 15 values) to host VI?

  Thank you

  As mentioned, the 9144 only supports the analytical engine.

  In regards to what you do, it really depends on the entire application. For example, what is the master? Are there other systems at issue here? Etc. It's a good read, in general, although it might not help this second right: http://www.ni.com/white-paper/14151/en/

  A high level, you need to decide what you need. If you have need for deterministic communication, low-latency over long distances from a RT controller, the 9144 is probably the right choice. If you need low latency + streaming over short distances to a RT controller, you should look into the RIO MXI chassis. If you need mainly not deterministic low speed (10 hz) data mixed with low flow continuous over long distances to a windows or host RT, then ethernet expansion rio (9146,7,8,9) is probably the right choice. If you need high speed continuous with low control latency over long distances to a windows or RT host, you need a full cRIO controller. Based on what you've posted so far, its uncertain is the right person.

  Lets say you're stuck with the 9144 for now. As you can easily hit 1 kHz scanning cycles, it should be perfectly possible to data 'stream' to 10 Hz. If you run the scan at 1 kHz engine, then you are 100 x oversampling. Where it gets complicated is this requirement of sync. By default, acquisition input/output is synchronized to the clock of the scan (and you can see when the clock of scan is set by a knot of e/s FPGA). However, you can take complete control of a module in the FPGA and read inputs and outputs at any time if you please. In other words, you can set up so when DIO0 goes high you immediately enjoy all the values of AI 15. You can then transfer these values HAVE switched to the host using the user-defined variables.

• 9144 with FPGA and SGL EtherCAT custom user-defined Variables?

  Hello

  I currently have a small instrument driver (rs485) running on a chassis of 9144. The output values are communicated to the master EtherCAT using FXP numbers. I would like to pass these FXP to SGL, since I've upgraded to SP1 2012 LV with FPGA now supports numbers of SGL.

  Is this possible? I tried several times to create the Variables defined by the user of SGL in the project, but the date type is gray.

  Greetings from Munich,

  Götz

  Unfortunately, SGL is not a data type supported for communication to and from a 9144. The types of data available for the I/O user-defined variables are:

  * Fixed point
  * Signed integers (Int8, Int16, Int32, Int64)
  * Integers (UInt8, UInt16, UInt32, UInt64)
  * 32 bit field
  * Boolean

  More information on I/O user-defined variables can be found at:

  Programming EtherCAT i/o with FPGA Intelligence to: Differences in LabVIEW FPGA programming API
  http://www.NI.com/white-paper/10618/en#toc4

• Extracts & user defined Variables

  After ~ 5 years not working not with any what HAT, I started a new post on 28/03/2016 and put back the trial HR 2015 a spin. I'm very excited by what I see and were able to do so far.

  I have 3 'entities' to write and I created 3 pages, one page per entity.

  Each of these presentation pages, I have this first line:

  |

  This section describes how to enter and manage [entity].

  |

  I set each [entity] as a user-defined variable. Each page with this sentence I hard-coded and added a reference to the user defined Variable and then produced output. Works great.

  Now, I'm going 'down' a level. What I want to know is how to

  |

  "This section describes how enter and manage."

  |

  be a code snippet. I want it to be an excerpt because when I write a sentence better, I don't have to make the same change on each of these presentation pages. Finally, there are 19 pages of presentation.

  
  

  Anyone who structure their content like this?

  
  

  What I want to avoid doing several manual changes. For example, if the following examples have been in a RoboHelp project, on https://support.assessment.pearson.com/x/N4Dy, there is this sentence:

  
  

  This section shows you how to manage user accounts.

  
  

  On this page - support to manage test paper - next to PearsonAccess online User Guide - Pearson Assessment - it is this sentence:

  
  

  This section covers all the unique aspects of the test paper.

  
  

  What I'm trying to do, is to have an extract which is defined as:

  
  

  This section tells you how to

  
  

  and refer to it on both pages.

  On the first page, it looks like

  from <>this section tells you how to< / endSnippet >

  user accounts < beginUserDefinedVariable >< / endUserDefinedVariable >.

  Then on the second page, I would say this:

  extract < code > This section tells you how to < / endSnippet >

  < beginUserDefinedVariable > manage paper test < / endUserDefinedVariable >.

  |

  The reason why I want it as a snippet of code is because I don't want to have to maintain "this section tells you how to" text hardcoded on each of these presentation pages. I would like to take advantage of the functionality of content reuse to avoid a bunch of copy / paste or even find / replace.

  Thanks for any help!

  Paul Hanson

  RoboHelp MVP of looonnngggg a long time ago...

  But what you might want to consider, is another variable to contain the desired text in the code snippet. This could be inserted inline. Then update you only in the variable.

  Just thinking out loud a bit.

  See you soon... Rick

• Flash Wrapper and access user-defined variables

  I'm working on creating a Flash AS3 wrapper to combine several files cpativate.  I am able to retrieve system variables, but I'm not able to recover the user-defined variables.  I have a variable that is defined by the user in my Captivate called passedScore, in my Flash script, I have the following...

  var mcLesson1:MovieClip;

  btnHit.addEventListener (MouseEvent.CLICK, test);

  var vLoader:Loader = new Loader();

  vLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, swfLoaded);

  vLoader.load (new URLRequest ("untitled1.swf"));

  function swfLoaded(e:Event):void {}

  mcLesson1 = MovieClip (vLoader.contentLoaderInfo.content);

  vLoader.contentLoaderInfo.removeEventListener (Event.COMPLETE, swfLoaded);

  addChild (mcLesson1);

  }

  function test(event:MouseEvent):void

  {

  feedback1. Text = mcLesson1.cpInfoCourseName;

  feedback2. Text = mcLesson1.m_VarHandle.passedScore;

  }

  retroaction1 correctly displays the name of the course, however, for feedback2 it errors saying a term are indefinite (referring to m_VarHandle)

  try to use mcLesson1.cpEIGetValue ('m_VarHandle.passedScore');

• When I print my paper to "user-defined" size in Thunderbird by default instead of "letter". Have to change manually, but does not.

  I use a printer Brother HL-6180DW and the paper size to default printer to 'letter' 8 1/2 x 11 on everything, except
  When you try to print an email from Thunderbird. If I manually change the paper size in Thunderbird to the letter, it maintains for that impression, then default to "user-defined" which is 3.0 x 5.0. How to make the default format letter? Thank you.

  I have answered hundreds of posts here every month. Most of the time I don't know who or what 5 seconds after I'm done.

  I did not add... I said to delete. You can remove all in printers and when you restart Thunderbird and try and print with the selected printer is the will add stuff if needed. So bite the bullet and simply delete away.

• What are user defined variables (UDV)?

  I'm trying to debug an application in real time and have worked on known issues for LabVIEW Real-time 2011. There is a term called "user defined Variables (UDV)" that opens occationally document known issues with other documents. It seems that UDVs can be created under target FPGA but I am unable to find any useful information on them. I know only local, global, shared, single, variable IO process.

  Hi Lucie,.

  The /o Variables using the help documentation gives a pretty good explanation of what a user-defined variable is in the section "data i/o Variables for Custom FPGA of e/s". I hope that this documentation helps!

  Best,

  tannerite

• RH6: User Defined Variable: how to change?

  QUESTION
  Is it possible to change the value of a variable that is defined by the user in RoboHelp 6? If so, please describe.
  
  QUESTION
  After you change a RoboHelp project, I want to update the value of a user-defined variable, but I don't see any way to do this.
  
  BACKGROUND
  My PC is under Win XP SP2. I use RoboHelp 6 to create a HTML Manual. I have several subjects; each topic has its own model. A common feature of each model is a version number. I inserted a variable defined by the user to the version number in each model. RoboHelp pushed successfully this version number to all my subjects.

  If you double-click on the user defined Variable in the project manager, you can change the default value here. I think what you want but is a different value for different generations. In the first page of the wizard when you build there is a button of Variables, you can change it there is for this build.

  You can create different configurations for different versions and each will retain its own value. Craig Clarke wrote an article on what will soon be published on the Adobe site. Hope this helps until then as I know that Craig, who has more knowledge of this area, is currently on holiday.