User of the RPD power function

Similar Questions

• How * disable * the touchpad power function?

  Hi, I have a craving dv7 and it has a function whereby if you press twice on the left upper corner of the touchpad, it switches it on or off.

  I want to DISABLE this feature, because I'm constantly tripping by accident in the normal conditions of use and so am always disable the touchpad and have to tap twice again to reactivate.

  I looked online and the documentation but have found no way to disable this feature.  Does anyone know how?

  THX,

  Chris

  FYI, I contacted HP Support and they sent me the following, which tells how do.

  If it please click on the links below and follow the steps mentioned in the Web page under the section adjust single and double tapping.

  http://support.HP.com/us-en/document/c03523373

  Unlike in the image settings window the touchpad in the link above, the settings window of the touchpad on the dv7 want is not an expandable tree for tapping settings, but it has an icon of the gear to the right that if clicked, opens another window of dialogue that has a checkbox to enable/disable this feature.

  Chris

• a reminder of the user interface will have a function with arguments?

  some ScriptUI quirks... I have a function (cut in this example) that I can call very well by itself of the extendScript window or if I set directly to the onClick callback, but when I try and call the function from a reminder and analyze arguments, the onClick is not working and the service runs once when the script runs first? what I am doing wrong?

  It works using the extend script window

  Nudge (23,77)

  
  

  function nudge (offset, distance) {}

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (shift * distance);

  Alert ("Done")
  

  }

  This works when the button is clicked in the user interface

  
  

  myButton.onClick = function() {

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (23 * 77);

  alert("done")

  }

  This also works when the button is clicked in the user interface

  
  

  myButton.onClick = boost

  
  

  function nudge() {

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (23 * 77);

  alert("done")

  }

  but when I try and pass arguments (kind of functions) that does not

  
  

  myButton.onClick = nudge (23,77)

  
  

  function nudge (offset, distance) {}

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (shift * distance);

  Alert ("Done")
  

  }

  OK, in the case where someone is interested... the solution with the permission of Mr. Lloyd Alvarez is to nest the function in another function call, why, I have no idea, but it works a treat...

  myButton.onClick = function() {nudge (23,77)}

  function nudge (offset, distance) {}

  var L = app.project.activeItem.selectedLayers [0];

  L.startTime = (shift * distance);

  Alert ("Done")

  }

• Move from PT8.52 to PT8.53 due to functional database HRCS90: PS user in the browser connection error

  People,

  Hello. I've been installing HCM and Campus Solution 9.0 revision 5 with 8.53 PeopleTools.

  My OS is Oracle Linux 5 and database server Oracle 11 GR 1 material.

  Because functional data is written with 8.52 PeopleTools, I upgraded PT8.52 to PT8.53.

  Tuxedo Application Server boots with 8 process successfully.

  In browser: http://192.168.196.102:8000/psp/ps /? cmd = login, I connect using UserID PS and mypass but the error message as below:

  
  "An error has occurred. You can try to connect again. If your attampt fail, please contact your system administrator. »

  
  I followed the http://docs.oracle.com/cd/E37306_02/psft/acrobat/PeopleTools-8.53-Upgrade_02-2013.pdf document and
  have upgraded the instance database functional HRCS90 for 3 times manually. But still the same error of the browser connection PS user.

  I checked the application server log file server current file APPSRV_1219.LOG which indicates the error message as below:

  File:/VOB/PeopleTools/src/pssys/prsmget.cpp a SQL error.
  Stmt #: 'MSG_EVENT_DATALONG': invalid identifier.
  SQL stmt failed:
  Select EVENET_NAME, HTML_FIELD_NAME, MSG_EVENT_TYPE, MSG_EVENT_DATALOG, FIELD_EVENT_TYPE
  of PSMSGEVENTS
  where PORTAL_NAME =: 1
  and PORTAL_OBJNAME =: 2

  The SQL error in the log file above current application server means that the functional database is not being upgraded correctly.

  My question is:

  I need to upgrade the functional database to help change Assistant. Can I use the functional basis upgrade HRCS90 to rerun upgrade scripts?
  Or: what do I have to install a fresh funstional HRCS90 database to run scripts to upgrade the help Wizard to change?

  
  Thank you.

  I'll try to describe the procedure for the last time.

  Start with a new installation of HRC9.0, which is delivered to 8.52 PeopleTools.

  In PeopleTools installation manual, started 7-2 task: update database to the latest version of PeopleTools, page 188:

  http://docs.Oracle.com/CD/E38921_01/PSFT/Acrobat/PeopleTools_8.53_Installation_for_Oracle.PDF

  skip the task 7-2-1: data cleanup, this is for PT8.47 and low.

  Task 7-2-3: the PeopleTools Tables system update:

  run the following scripts:

  rel853n. SQL or rel853un.sql if you install a Unicode database

  Grant.SQL

  Encrypt.DMS

  msgtlsupg. DMS

  storeddl. DMS

  Follow the steps in Task 7-2-4: update of database objects PeopleTools

  Follow the steps in Task 7-2-5: updated PeopleTools multilingual of objects (if you are installing a multilingual application)

  Follow the steps in Task 7-2-6: remove obsolete PeopleTools Database Objects

  Follow the steps in Task 7-2-8: change in the PeopleTools Tables

  Follow the steps in Task 7-2-9: migration of records of new storage space

  Follow the steps in task 02/07/10: update of system data PeopleTools

  Follow the steps of work 02/07/10: update of PeopleTools system data:

  skip the task 02/07/11: running of the PeopleTools Conversions

  skip the task 7-3: the additional Scripts running Data Mover

  skip the task 7-4: installation of a system of PeopleTools multilingual database

  Follow the steps in Task 7-5: VERSION running engine Application program

  Follow the steps in the 7-6 mission: running reports SQR

  skip the task 7-7: verification of the database

  Follow the steps in Task 7-8: SETSPACE running. SQR

  Follow the steps in Task 7-9: execution of Alter Audit

  And now your PeopleSoft PeopleTools 8.53 application.

  It may seem like a lot, but it should not take you more than a couple of hours instead of weeks.

  Halin

• function defined by the user in the package

  Hi all
  
  is it possible to return a value greater than 1 when you use the function defined by the user in the package?

  You must declare variables US1 and US2 as well. I also modified your code a little more assing numbers directly rather than using select.

  First of all,

  Your package body and specifications should have the same input parameter names. Your spec is seen cid and your body with ccid. Has changed.

  CREATE OR REPLACE PACKAGE creator.marco_function_clienttype
    IS
  
    -- 0 - not found
    -- 1 - small business
    -- 2 - corporate
    -- 3 - individual
  
     FUNCTION f_clienttype
       (ccid number
       )
       RETURN NUMBER;
  END;
  / 
  

  CREATE OR REPLACE PACKAGE BODY creator.marco_function_clienttype
  IS
  
  FUNCTION f_clienttype (ccid NUMBER)
     RETURN NUMBER
  IS
     us    NUMBER;
     us1   NUMBER;
     us2   NUMBER;
  BEGIN
     --officialtype = 2 - corporate, officialtype = 3 - individual
     SELECT ct.officialtype
       INTO us1
       FROM contragenttype ct, contragent d
      WHERE d.ID = ccid
        AND ct.cid = d.contragenttypeid;
  
     ---
     IF us1 = 3
     THEN
        us    := 3;
     ELSE
        --ENTERPRISETYPE.id = 910 - small business
        SELECT dd.enterprisetypeid
          INTO us2
          FROM contragent dd
         WHERE dd.ID = ccid;
  
        IF us2 = 910
        THEN
           us    := 1;
        ELSE
           us    := 2;
        END IF;
     END IF;
  
     RETURN NVL (us, 0);
  END;
  END;
  / 
  

  G.

• Calculate the measure of the RPD

  Hello! I have a mission to do. I need to calc value depends on the line of the month dashboard. I mean... If the user select March 2008 I must show the value of the sum of the last 12 months (from April 2007 to March 2008). I can do this in the presentation with TIMESTAMPADD layer (SQL_TSI_MONTH, - CAST(11 AS INT)... but I need to calc in logic layer... because I have to join to this calc with the actual value of the month and cum year value and filter TIMESTAMPADD... is a general filter of my report and I have erroneous results...)
  I can write an example if you need more information.
  
  Someone help me?
  
  Thank you very much!!!

  Hi Alex1,

  I also had problems with this in the past. As you mentioned, it straight forward to implement in a query using a C.V. and filter the report on last twelve times. But it isn't really the same functionality to the RPD.

  There are only two functions of time series in the repository: there is and up to date. ToDate will do things like months to date, year to date, etc.. In the first year to date seems to be a good fit, but if your 12 month period will last two years (which they almost always do except for December), so it doesn't give you what you want.

  There are can give you a single value, but it does not give you a running sum.

  What I see, it seems the best idea here is to use the Ago (there are (>, >, >)) work, 12 times, i.e.
  Ago(value, month,11) + Ago(VALUE, MONTH,10) + Ago(VALUE, MONTH,9) + Ago(VALUE, MONTH,8) + Ago(VALUE, MONTH,7) + Ago(VALUE, MONTH,6) + Ago(VALUE, MONTH,5) + Ago(VALUE, MONTH,4) + Ago(VALUE, MONTH,3) + Ago(VALUE, MONTH,2) + Ago(VALUE, MONTH,1) + Ago(VALUE, MONTH,0)

  It is not the prettiest method and I'm completely open to suggestions, however, that's the first thing that seems to work for your scenario.

  Good luck and if you find this post useful, please give points!

  Best regards

  -Joe

• Please tell me exactly how to remove the AVG search function

  Please tell me exactly how to remove the AVG search function

  edited by a moderator for clarity

  You need not repeat dozens of times or use profanity to get help.

  (1) disable all non-essential or unrecognized extensions on this tab. Don't know what it does? When in doubt, turn off:

  Firefox orange (or the Tools menu) button > addons > Extensions category

  Use the links above a disabled extension to restart Firefox if some seem to.

  (2) restore your Google search engine:

  https://addons.Mozilla.org/en-us/Firefox/addon/SearchReset/

  (3) check a user.js file (before the release of Firefox, otherwise the parameters in this file can cancel your cleaning) as described in this article: How to fix preferences that will not save.

  (4) If AVG search took over your page to the new tab (Ctrl + t), which changes as follows:

  (A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (B) in the filter box, type or paste newtab and make a pause so that the list is filtered

  (C) double-click the preference browser.newtab.url and enter the desired value for your favorite page:

  thumbnails (i) (default) Page = > subject: newtab

  (ii) blank tab = > subject: empty

  Firefox homepage integrated (iii) = > topic: welcome

  (iv) any other page = > full URL of the page

  IMPORTANT: If you have AVG software in your Windows Control Panel, you need to remove it.

• Satellite T110-10 x gave me the error as soon as the first power on

  Hello!

  My new Satellite T110-10 x gave me the error as soon as the first power on.

  http://I25.Tinypic.com/33bhiqq.jpg

  I try to start in Safe Mode, same problem:

  http://I25.Tinypic.com/2hdvfis.jpg

  I start the recovery procedure from HDD using F8 and repair my computer options but it's «Repair my...» "lack from the advanced boot options menu:"

  http://I31.Tinypic.com/2pz9xkz.jpg

  I do same like Dwardlow and all start Norway as a new "machine".
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53952

  Thanks a lot Dwardlow for your help!
  PS: I'm from Romania, sorry for my bad English!

  Thanks for the comments.
  Good to know that this thread has helped you.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53952

  Thanks to user for nice workaround Dwardlow!

• "Monitor the message" Power button locked ".

  New monitor 23 "HP - HP 2310 m accidentally pressed the button too long power; now, I can't get the monitor to turn off completely. When the computer is off the screen goes into sleep mode with orange orange LED (switch) continuously. How can I completely disable the monitor and the message "Power button lock '? Thank you

  From the Manual:

  Power Button lockout - indicates the power button is locked. If the power button is locked, the Power lock button warning message.

  ◦ If the power button is locked, press and hold the power button for 10 seconds to unlock the function of the power button.

  ◦ If the switch is open, press in and hold the button for 10 seconds to lock power button function.

  See you soon,.

• shared drive several users at the same time

  I have a time capsule 2 TB and do not use the time machine function. Instead, I use it as a hard drive and a WIRELESS router. Now, I have a problem: my Macbook pro has 2 user profiles, but I can't use the drive of the time share at the same time capsule. Which means I need to each user log off or I need to disconnect a user manually, but it feels stupid. Is it possible to have the shared for two available users (still) drive?

  Thanks for any help,

  KR.

  Martijn

  What you have discovered, it's normal.

  Here, a user has discovered a way around the problem... but you must use SMB connection.

  Problem to access the contents of multiple users to a Mac

• Delete all orders of the user at the same time?

  Hello

  There is nothing in the code to delete all orders of the user at the same time? (by code or function)

  Get all enable them command user?

  Thank you

  Hello Oz,

  Call ScriptCmdReset()

  to return to the State of brand new tiara, which, in most cases, unload all global variables and commands that you have created by program since then.

  Brad Turpin

  Tiara Prodcut Support Engineer

  National Instruments

• How to get an array of integers to user in the User Interface

  Hi all. I'm not a very experienced user of the CVI. I have almost exclusively coding in LabVIEW but have a client who wants all of their work in the CVI.

  I've been very fruitful so far (set up a Modbus API from scratch that supports all types of connection) but am confused on how I can get the integer multiples of the user without limiting the number of integers I can get. Essentially, I need to be able to get an array of integers to the user.

  General information, I am building a user interface to test my Modbus API. There are Modbus functions to 'Write multiple registers' and 'write multiple coils. I want the user to be able to enter all the values they want to write in one command.

  What is the best way to get an array of integers through the user interface?

  The easiest way is probably to allow user input in a textbox control numbers: items can be separated by spaces, commas, or even a line break (using ctrl + Enter). You will then need to extract the string from the TextBox and analyzed for numeric values using any non-digit character as a separator: strspn (string, '0123456789'); can be used for this.

  More complex, another possibility is to use a table control to receive user input: you Dresses an empty table with a reasonable number of roews, or you need some codes to add new lines as long as the user fills all those already existing. On the other hand, it will be easier since data recovery in a simple statement, you will all return values: GetTableCellRangeVals (panelHandle, PANEL_TABLE, VAL_TABLE_COLUMN_RANGE (1), table, VAL_COLUMN_MAJOR);

• How to show the mouth full function

  Hi all, I'm sure this is a stupid question, but I can't seem to track it down.

  When I use the Palace of function, it shows a view of abbreivated, Express, Favorites, user libraries and then an arrow down to show the rest of the Palace.

  How can I put it so that it always opens the mouth (as if you had hit the arrow down)?

  Thank you

  (If you get the palette via right click, you will need to nail it down to see the 'view' button).

  Press 'view' in the top right, select "Change the visible categories", then tap on ""select all "." Quite.

• Is it possible to change the menu of windows update to the much more functional version?

  Is it possible to change the menu of windows update to the much more functional version? The change took place on 07/10/09 and made by selecting which updates to install more troublesome. * Note * I do without roll back Windows Update 7.4.7600.226 Agent that has been installed on 10/07/09.
  This change of format is also just change the switch on for windows 7?

  Hello

  Welcome to Microsoft Windows Vista community forums!

  I am sorry to say that there is no choice left out. You must perform a system restore or uninstall the manual update that is installed.

  Improvements made to the version of the Windows Update Agent 7.4.7600.226

  • Time sweep improved for Windows updates
  • Improved user interface for Windows Vista and Windows Server 2008 - based computers that are running Windows Update
  • More visible and detailed description of updates
  • Improvements in the way in which users are informed about service packs

  For more information, please see the link below:
   
  http://support.Microsoft.com/default.aspx/KB/946928

  Kind regards

  Savan - Microsoft technical support.

• Under the "Task Manager", which is the unsecurapps.exe Function?

  I'm trying to find out what made the 'unsecurapps.exe' function in the Task Manager? or is linked to?

  If you have spelled the name correctly, then it is very likely to be malicious.

  When a Google search produces no hits or suspicious hits (the case of unsecurapps.exe), the answer usually is that the file in question is focused on the malware.

  What antivirus application do you use? Is current and never expired subscription?

  Download, install, update and run full scans with two of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  However, if the task is actually unsecapp.exe, it's another story.

  If you're running Vista (what version of Windows is installed, including service pack?):

  Sink to receive asynchronous callbacks for the WMI client application running in different processes. WMI, Windows Management Instrumentation, allows developers to write scripts and programs for the management or querying features, user accounts, Windows services, running programs, networking and many other internal technical aspects of Windows.

  This particular task, UNSECAPP. EXE, is launched by Windows Vista when a program needs to use WMI programming - it offers a conduit (sink) programs to receive the results of their WMI queries and commands windows.

  Unsecapp.exe is not limited to Vista, but also concerns the use of Windows Management Instrumentation in XP sp2: http://support.microsoft.com/kb/875605

  What do you do when unsecapp.exe appears in the Task Manager?