Using a Progressbar while showing a basic data in Datagrid

Similar Questions

• I backed up the files on a DVD of a XP OS to put on a 7 OS but the record shows that the data on the DVD is corrupted

  I backed up the files on a DVD of a XP OS to put on a 7 BONE, but the record shows that the data on the DVD is corrupted. I have run some recovery on the DVD programs and even if she shows that 2.3 GB have been used they are unable to find the data

  * original title - I need fast help please *.

  How is not have you backed up the files?  You just burn it to a CD or did you use the 'NT backup' program of Windows XP?  I don't think that the Windows XP Backup program is compatible with the Windows 7 backup program.  The following link contains an article that explains this condition:

  "Windows 7 backup XP restore"

  If you simply copied the files on the CD/DVD, then it is possible the program that copied the DVD not to "finalize" the DVD.  If you can play the DVD on the computer that created it, but cannot on another computer, then this is probably the case.  If this is the case, then put the disk into the computer that created and put in place the program that burned and look under the 'Tools' menu for an option "Finalize"... and do it.

  HTH,
  JW

• After trying to install the updates. my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.

  Visa update problem

  After trying to install the updates.  my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.  I tried to follow the instructions provided here because it seemed to be the same problem.  But when I restart and hold down the F8 key so I can boot into safe mode, I tried selecting safe mode and I get the same results, and I tried again by selecting the option 'Disable automatic reboot' which seems to be an option on the same page with the option of safe mode.  Whatever it is, the same message comes back and I can never get to where I can see my desktop to click 'start '.  I can't get out of this cycle.  I installed the update because it said I needed to install it.

  *************************************************************************************************************************************************

  Turn off your computer by holding the power button for about 20 seconds.
   
  Start your computer in safe mode: press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears
   
  Disable the automatic restart in the event of system failure:
   
  • Click Start
  • Click on Control Panel
  • Click on system and Maintenance link.
  • Click on the system link
  • In the left pane, click Advanced system settings
  • Locate the startup and recovery area, click the settings button.
  • In the startup and recovery window, uncheck the box next to automatically restart.
  • Click OK in the startup and recovery window
  • Click OK in the System Properties window
  • Close the system window
   
  After that... While STAYING in safe mode I do a system restore and maybe try a manual install of the update later.
   
  For the sake of space I refer you to the article about how to proceed.
   
  System restore
  http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspx
   
  Windows updates: http://windowshelp.microsoft.com/Windows/en-US/Help/8f259118-0d61-4c7a-8c56-24987e87a8171033.mspx
   
  Please let us know if this solution works for you

  Theresa
  Microsoft Answers Support Engineer

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• show only "Fetching Data...". "and no display of data

  Hello
  
  can someone help me,
  
  When I view a particular page appears "Fetching Data"... "and then shows all the data.
  and the rest, the words «... data recovery» ».

  Hello

  This can have many reasons. One of the reasons is that you use a dynamic region on the page and this bean région #s is configured by supporting the scope of the bean. However, as said above, it's a needle in a haystack thing you request we do with so little information

  Frank

• Dynamics of basic data in BAM

  Hey guys,.
  
  Since im new to BAM, im having trouble with this problem. I have an Oracle database with the fast evolution of the data. I'd like to create a dashboard showing the datachange, but I'm not sure wich mechanism to use.
  
  Ive already tried the external data source, but the user has hit 'reprompt' whenever they want to see the new data. It's only good for static data. IM thinking about creating a simple bpel process with an infinite loop to extract data from the database to Bam. Another option is some java code to get the data and send it to bam via webservice inside and an endless loop.
  
  I have the feeling that I'm missing out on something much more simple then these options. Should I create triggers in the db instead? BAM is not supposed to make unnecessary the triggers?
  
  Thank you!

  If you can convince your DBA for you to create triggers, you can use AQ JMS to Oracle DB (I guess that your DB is Oracle) to send data to BAM via JMS (using EMS of BAM).

• is it OK to use your macbook while loading

  is it OK to use your macbook while loading

  Yes.

• Calendar shows the wrong date in my dock

  The calendar in my dock icon is showing the date of December 30, yet when I open the app it shows today's date. How do I change so the icon displays the current date?

  You can remove the dock by clicking on it and keep. Drag and then click docking station and the United Nations. Then go to top go to menu and open applications. Right click on the calendar and then create aliases. Insert the alias in the dock.

• Use two assistants for the acquisition of data at the same time

  Hello

  I want to read multiple data channels of analog inputs on my DAQ hardware. However, when I try to create two separate data acquisition assistants for each entry, it gives an error saying "is reserved for the specified resource. The operation could not be performed as indicated "." Can't use two assistants for the acquisition of data at the same time?

  I have to add different channels in the same assistant DAQ? I tried, but I couldn't separate the data in different graphs.

  How does this work?

  Kind regards

  Allard

  You can't have multiple tasks of the same type (in this case inputs analog) on the same device.  Just so having 1 DAQ Assistant read all your channels and separate your channels for individual transformation.

• Error message States 'A TCP/IP error occurred while trying to send data to the Server Error 0x800ccc13' when try to open Microsoft Outlook 2000.

  Original title: Office of Microsoft Outlook 2000 does not open.

  Error message States "A TCP/IP error occurred while trying to send data to the Server Error 0x800ccc13 #

  Hi John,.

  1. what operating system is installed on your computer?

  2 How long have you been faced with this problem?

  3. don't you make changes on your computer before this problem?

  
  Reference: Outlook 2000 Solution Center

  Please post back and we do know.

• I want to use Windows Easy Transfer XP to my data, but the software said "computers are old computer."

  I want to use Windows Easy Transfer XP to my data, but the software said that "the two computers are old computer", how do I chanage the parameter in the new computer? In addition, two computers are running in Windows XP system, thank you.

  Thanks for answer you, it is really useful.

  But I have another question:
  Why Windows Easy Transfer is still a Windows XP version?

  Thank you.

  Because Windows Easy Transfer is designed to transfer data FROM a Windows XP computer TO Windows 7 (or Vista) computer.

  For example, you install Windows Easy Transfer on the computer Windows XP, but the output (if it is stored on external media or transmitted over a network connection or cable Easy Transfer) is used by the Vista or Windows 7 computer.

• Email sent using gmail pop, while on outlook express 6 is checked in to the gmail server sent the file, but not on my express outlook sent folder.

  Original title: problem with outlook express 6 and gmail

  Email sent using gmail pop, while on outlook express 6 is checked in to the gmail server sent the file, but not on my express outlook sent folder.  How can I have email sent appear in Outlook express 6 sent folder.  I put it as pop not imap

  Any suggestions?

  Check in OE under Tools | Accounts | Mail | Properties and ensure that it is not set to IMAP.  It seems to me that if you use IMAP folders.  If it isn't, in addition to the suggestion of Umesh, you can try to go to file | Identities and install a new identity and add your POP3 account and see if it works very well.

  Steve

• Can I uninstall XP SP3 and then use restore the system to an earlier date.

  I want to uninstall XP service pack 3 using one of four methods recommended by Microsoft. Once uninstalled that I will then be able to use the system restore to an earlier date that was running on service pack 2?

  Try to return to the last config known that ATI Catalyst had installed, since the upgrade to SP3 is no longer will install catalyst. SP3 may or may not be the cause of this, but I want to restore to earlier date that was running under SP2.

  Please stick to your original thread: http://answers.microsoft.com/thread/6109ae35-d555-e011-8dfc-68b599b31bf5 (24 March-11 & ff)

• I inherited a laptop running Win 7 Enterprise. I've used for a while now and upgrade to Windows Pro 10

  I inherited a laptop running Win 7 Enterprise.  I've used for a while now and upgrade to Windows Pro 10.  I have no problem buying software, but would like to know if there is a way to force an update rather than a clean install, which will let to me having to re - install several months value of applications and the tweaking associated.

  Thank you.

  JLOB

  Try this work around:

  https://www.reddit.com/r/Windows10/comments/3wn9cc/can_someone_with_win_10_home_check_this_for_me/

• My computer (win 7) does not detect the new lx1000 lifechat headset. Cannot use the microphone while I am on Skype.

  My computer (win 7) does not detect the new headset.

  Cannot use the microphone while I am on Skype.
  I Can hear music, but I can't record any sound, for the most part the microphone does not work as it should. (Which is terrible for a MS product)
  Can not see the device on the list of Audio material.
  Help?
  Thanks in advance
   
  Original title: lx1000 lifechat

  Not sure, but maybe - http://support.microsoft.com/kb/935748/en-gb

  It will be useful.

• I can't use my headset while I listen to the music with the home theater.

  original title: I can't use my headset while I am listening to the music with the cinema.bouth House is connected to my pc... What can I do?

  I have my homecinema and my headset connected to my pc.what can do so they can work at the same time?

  Hello

  1. What do you mean my home theater?
  2. How is it connected to the PC?
  3. What is the brand and model of the PC?

  Follow the steps described in the links to update the sound card drivers:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  It depends on your hardware. Your computer must have a card that is capable of several output stream.