using AD with ACS 5.3

Similar Questions

• WLC 4402 impossible to authenticate correctly with ACS 5.2

  For some reason, I can't WLC to authenticate correctly with ACS 5.2. It's very strange in the sense that when I checked the log. ACS authenticates and authorizes the WLC 4402, but I can't log on the WLC. login screen appears, if I typed the username that he jumped

  Controller of >

  user:

  password:

  No matter what I typed (internal or external users), nothing seems to work.

  It comes to my frustration, I have no problem with authentication of routers and switches except WLC 4402.

  Hello

  Please delete privilege on the ACS level settings.

  Elements of strategy > authorization and permissions > peripheral Administration > Shell profiles > common tasks

  By default the privilege - do not use.

  Maximum privilege - not in use

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages

• Permission of AAA with ACS Shell-games

  Hi all

  I use a router cisco 871 running that version 12.4 (11) T advanced IP Services.

  I have difficulty getting permission to AAA to work properly with ACS.

  I am able to configure ACS fine users and assign them shell and private level 7.

  I then install a set of Shell Auth and enter the issuance of orders and configure.

  When I log in as a user, I get an exec with a level of 7 priv no problem, but I never seem to be able to

  to access global configuration mode by typing in conf (or set up) terminal or t.

  If I type con? It is the only command connect, configure is never an option...

  The only way I can get this to work is by entering the command:

  privilege exec level 7 Configure terminal

  I thought the whole purpose of the ACS Shell Set to provide this information to the router?

  It's frustrating

  The ACS server is set up with the Shell Set named Level_7 order authorization

  It is attributed to the relevant groups and I have the 'Unmatched orders' option selected in the 'license '.

  The "unmatched Args allowed" is also selected.

  See an extract of my IOS config below:

  AAA new-model

  !

  !

  AAA group Ganymede Server + ACS

  Server 10.90.0.11

  !

  AAA authentication login default group local ACS

  AAA authorization exec default group ACS

  AAA authorization commands 7 by default local ACS group

  !

  Cisco radius-server host 10.90.0.11 keys

  !

  !

  privilege exec level 7 Configure terminal

  privilege exec level 7 set up

  privilege exec level 7 show running-config

  privileges exec level 7 show

  !

  Hope you can help me with this one...

  PS I tried with orders of privilege on the router and remove the router and just keep getting the same results!

  Hello

  So now,

  You're actually using two different options and trying to couple then together. What I would say is you either use authorization Command Shell function or play with level privileges. Not mixed together both.

  Above scenario might work, if you move orders to focus on level 6 and give the 7 user privilege level. He couldn't be sure. Try it and share the results.

  That's what I suggest that orders back to a normal level.

  Provided below are the steps to set up the shell command authorization:

  -------------------------------------------

  Follow these steps on the router:

  -------------------------------------------

  ! - is the desired username

  ! - is the password

  ! create - us a local user name and password

  ! - in case we are not able to get authenticated via

  ! - our Ganymede server +. To provide a backdoor.

  password username 15 privilege

  ! - To apply the aaa on the router model

  AAA new-model

  ! - Following command is to specify our ACS

  ! - location of the server, where is the

  ! - ip address of the ACS server. And

  ! - is the key which must be the same during the FAC and the router.

  radius-server host key

  ! - To get the authentication of users through ACS, when they try to log - in

  ! - If our router is unable to join the ACS, we will use

  ! - our local user name & the password that we created above. This

  ! - we prevent locking.

  AAA authentication login default group Ganymede + local

  AAA authorization exec default group Ganymede + local

  AAA authorization config-commands

  AAA authorization commands 0 default group Ganymede + local

  AAA authorization commands 1 default group Ganymede + local

  AAA authorization commands 15 default group Ganymede + local

  ! - Sequence of commands are for posting to the activity of the user.

  ! - When the user connects to the device.

  AAA accounting exec default start-stop Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  orders accounting AAA 0 arrhythmic default group Ganymede +.

  orders accounting AAA 1 by default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  --------------------

  ACS configuration

  --------------------

  [1] Goto 'Profile components shared' a-> 'Shell command authorization sets'-> 'Add '.

  Provide any name at all.

  provide sufficient description (if necessary)

  (a) for full administrative access set.

  In the unmatched controls, select 'allow '.

  (b) for all access limited.

  In the unmatched controls, select "decline."

  And in the field above 'Add a command' box, type in the box below and the main command "permit unmatched Args" Order under allow.

  For example: If we want the user to only have access to the following commads:

  opening of session

  Logout

  output

  Enable

  Disable

  Show

  Then, the configuration should be:

  -----------------------------------------------

  -Allowed unparalleled Args.

  -----------------------------------------------

  connection permit

  permit disconnection

  exit permits

  Select the permit

  disable the permit

  license terminal configuration

  ethernet interface license

  permits 0

  to see the running-config

  ------------------------------------------------

  in example above, user will be allowed to run only from commands. If the user tries to run the interface ethernet 1', the user will get "failed command authorization.

  [2] press 'submit '.

  [3] Goto Group on which we want to apply these command authorization set. Select 'change settings '.

  (more...)

• Integration of ASA with ACS

  Hi all

  I try to incorporate some ASA (8,6) with ACS (5,7), here is the configuration of the SAA.

  SH run | in aaa
  RADIUS Protocol RADIUS AAA server
  GANYMEDE + Protocol Ganymede + AAA-server
  AAA-server GANYMEDE + (management) host 10.243.14.24
  GANYMEDE + LOCAL console for AAA of http authentication
  authentication AAA ssh console GANYMEDE + LOCAL
  Console telnet authentication GANYMEDE + LOCAL AAA
  AAA accounting console GANYMEDE + ssh
  AAA accounting command 15 GANYMEDE privilege +.
  Console telnet accounting AAA GANYMEDE +.
  AAA authorization exec-authentication server
  AAA authorization GANYMEDE + loCAL command

  The problem is that I can get connected to ASA, but I can't type all commands in the CLI, I get the error message "failure of command approval.

  I have the same sets of commands and the shell profiles created for switches and it works perfectly.

  This is the behavior of ACS journals

  1. once I am having authenticated, I can see the logs in ACS with my username
  2 but when I type any commnds, is put down my permission and I see in the newspapers of the authorization of the CSA that this username is "enable_15".

  Can someone help me identify what the problem is

  Thank you
  Reverchon

  This happens when we have control permission enabled on ASA and try to run any command level 15 on SAA. To correct this problem you must check enable authentication of a user against GBA / GANYMEDE.

  AAA authentication enable console LOCAL + GANYMEDE

  After above listed licensing order, ASA will start to check the enable password against ACS/Ganymede and you use Ganymede activate the password that we can put on by user.

  ~ Jousset

• 6513 isn't intergrating with ACS

  Hello

  I have a problem with one of the devices, switch 6513. the acs server is directly connected to the switch inside the fwsm.

  I am able to ping the MSFC and FWSM ACS server, but it does not take the ACS. I have other 6513 and many other switches and router integrated normally with ACS.

  Please I need help.

  Kind regards

  Incase you are using Ganymede and deliver "Ganymede source control interface ip.

  User interface that is listed in the acs network---> switch---> IP address configuration

  Switch must use this IP address as the source for the packages of Ganymede

  Kind regards

  ~ JG

  Note the useful messages

• Group-lock for users of vpn with acs

  Hello

  Is it possible to controll what VPN profile, a user is allowed to use by Cisco ACS or the router?

  2811 router IOS 12.4 worm, ACS 4.1 using

  I just want to be sure that the VPN allows the user only the Client Profile assigned to them and no other profile groups.

  Example:

  User123abc gets their hands on a profile of co-wokers.

  HR_User_Profile.pcf

  SALES_User_Profile.pcf

  User123abc belongs to the Department of human resources and should be able to authenticate with HR_User_Profile. If User123abc is trying to authenticate by using the access SALES_User_Profile should be rejected.

  Any documentation explaining how to set up?

  The ASA will be your option. This should be controlled by the values of tunnel-group and class-group policy, group-lock, ACS and ASA

• Admin Auth LMS with ACS 5.3

  Hey people, I need to integrate LMS4 with ACS 5.x for LMS user auth. 2 roles are necessary, Admin and monitor. Y at - it all Documentation, example Configuration, or other useful information? Any help welcome.

  Best regards, Michael

  Hi Michael,

  Perhaps these threads will give you enough details:

  https://supportforums.Cisco.com/message/3484567

  Best regards

  André

• Cisco 1121 unit installed with ACS 4.2 SE version

  Hi all

  Sorry, we could install version to 4.2 on the Cisco 1121 device acs?

  Could we use 1120 ACS 4.2 image DVD to install on 1121?

  Or any workaround?

  THX!

  Calvin Su

  Hi Calvin,

  Unfortunately, 1121 hardware doesn't support version 4.2.0 acs so downgrade is not an option for 1121. It can only be used with ACS 5.x

  Kind regards

  Jousset

  The rate of useful messages-

• Authentication EAP - TLS with ACS 5.2

  Hi all

  I have question on EAP - TLS with ACS 5.2.

  If I want to implement the EAP - TLS with Microsoft CA, how authentication computer and user will be held?

  Understand that the cert is required on the client and the server end, but is this certificate to the computer links or links to individual users?

  If the links to the user, and I have a shared PC connection by few users, is that each user account will have their own certificates?

  And each individual user will have to manually get the CA cert? is there another method that my environment has more than 3000 PCs.

  And also if it binds to the user, any user can get their CA cert with their AD username and password, if they bring in their own device and try to get the CA certificate, they will be able to properly install the cert in their device on the right?

  I hope you guys can help with that. Thank you.

  Hope this will answer most of your questions:

  Client certificate or user

  http://www.Cisco.com/en/us/Partner/Tech/tk59/technologies_tech_note09186a00804b976b.shtml#T10

  Computer certificate

  http://www.Cisco.com/en/us/Partner/Tech/tk59/technologies_tech_note09186a00804b976b.shtml#T15

  In the case of EAP - TLS we have the certificate of computer and user installed on the machines.

  Kind regards

  Jousset

  The rate of useful messages-

• 3015 stops working with ACS, when updated to 3.1

  Hello

  We´ve uses the 3015 with 3.5.2 for a few months.

  It s been using ACS 3.0 with Radius set up exactedly as described in "using Cisco Secure ACS for Windows with the.

  3000 Concentrator VPN - IPSec.

  Now, we have improved the ACS to 3.1 and it stops working.

  When you try to TEST the communication between the 3015 and ACS we get "rejected authentication: password group is."

  not configured", and if looking in the logg you can see what follows.

  09:01:43.990 02/28/2003 191, SEV = 8 AUTHDBG/58 RPT = 2

  AUTH_Callback (514afe4, 0, 0)

  192 09:01:43.990 02/28/2003 SEV = 6 RPT AUTH/4 = 2

  Successful authentication: manage 12, server = 192.168.244.48 =, user = borta

  193 09:01:43.990 02/28/2003 SEV = 3 RPT AUTH/5 = 10

  Authentication was rejected: reason = group of password is not configured

  manage 12, server = 192.168.244.48 =, user = borta, area =

  09:01:43.990 195 02/28/2003 SEV = 8 RPT AUTHDBG/2 = 2

  AUTH_Close (12)

  Any ideas?

  ACS 3.1 is slightly changed it returns the class attribute in its packages to respond when a user authenticates, this was done for session management purposes. Normally, this has no effect on everything that you are authenticating against, but the 3000 uses this class attribute to force VPn users in a specific group. For example, you can force the VPN users in specific groups of 3000 by returning the class attribute so that the user with a specific group VPN3000 name, so any group they have actually configured in the VPN client, they find themselves in this other group and inherit all settings in this group.

  The error "password of group is not configured" comes from the fact that ACS3.1 returns a string in the format "dfhsdfjsdfshhhhghgkgekjfkjguwywe" (or something like that anyway :-)) in the Class attribute. The 3,000 who interprets as you want to force this user in this group. Of course this group name does not exist on the 3000, and you get rejected.

  There are two ways around this:

  -Move the hub to what anyone higher than what you're running. From v3.5.3 ignored 3000 this format of the attribute and access connections works very well even if ACS always sends the return attribute.

  -Change the user or group ACS and actually return the appropriate form the class attribute:

  UO = groupname;

  where groupname is the name of group VPN3000 you want this user to be placed in (it may or may be not the same as the one they set up in their client). Make sure that UO is in capital letters and do not forget the semicolon. The attribute Class is so just check 25, RADIUS (IETF) attribute cela and off you go, you may need to activate under Interface Config - RADIUS (IETF) Firstly if you see under the ACS user/group.

• 10.6.8 using.  With Safari I can view the Apple start page.  OK, using Firefox.

  10.6.8 using.  With Safari I can view the Apple start page.  OK, using Firefox.  What happens in the last 24 hours. How can I solve this?

  You can solve it using only not the OS X version 10.6, Apple Safari here on out!

  Over the years, there were no updating security for what be for OS X 10.6.8 Snow Leopard!

  This version of Safari is obsolete and has not been safe to use for many years.

  There is one more, last recommended Mozilla Firefox web browser update complete (worms) 48.0.0 that is always available, and probably will be more safe to use until the end of the year.

  https://www.Mozilla.org/en-us/Firefox/desktop/

  Mozilla is complete, at the end of the present in August, full support for Firefox on OS X 10.6 - 10, 8.

  OR

  Guaranteed ONLY (not more new web browser feature) support for an earlier version of th is permanent to Mozilla Firefox, web browser (worms. 45.0.0) through their program of Firefox ESR, (that you CAN download, install and use) which will continue to receive the support of a security update to Firefox until next April 2017 for OS X 10.6-10, 8.

  You can use these versions of the ESR. Ignore the notes support educational/business.

  https://www.Mozilla.org/en-us/Firefox/organizations/FAQ/

  OR

  See SeaMonkey.

  http://www.SeaMonkey-project.org/

  Good luck!

• The AirPod are compatible only with iphone 7? Or we can use it with more than 6 s... or any android device?

  The AirPod are compatible only with iphone 7? Or we can use it with more than 6 s... or any android device?

  Here are the tech specs: http://www.apple.com/shop/product/MMEF2AM/A/airpods

  They are bluetooth devices, so they work with the iPhone 5 or more.

  See you soon,.

  GB

• can I use Skype with the Ipad Pro or any other IPad?

  I want to know if I can use Skype with any kind of IPads?

  You can - the latest version of their app requires iOS 8 +: https://itunes.apple.com/us/app/skype-for-ipad/id442012681?mt=8

• can I use FCP6 with el Capitan

  can I use FCP6 with el Capitan

  Application compatibility

  (2) application compatibility

  Information on the compatibility of 10.11 El Capitan

• I know that this may be a lame question, but can I use Thunderbird with my Chrome browser and gmail account?

  I don't currently have firefox browser and very uncomfortable with Chrome for many years now. can I use Thunderbird with my Chrome browser? I want to manage a large mailing list for a nonprofit group that wants me to use Thunderbird.

  Thank you

  Reuben

  absolutely