Using cfchart stacked bar chart?

Are there examples of code for a stacked using cfchart in MX7 bar chart? I googled and searched without result.

Thank you!

Never mind! I found the 'secret': use several tags chartseries within a cfchart tag.

Tags: ColdFusion

Similar Questions

Multiple values per column in the stacked bar chart
I want to use a bar chart stacked in a dashboard of the process, but I am wondering how I can add multiple values per column, because through the available methods, you can only add one value per column. I add some values to hardcode and I get the chart but, for example, I want to add series anocher in the table named 'Closed' and values for this in each column (January, February, etc.)

Data source for filling
result as a Fuego.Chart.DefaultXYDataSource
result = Fuego.Chart.DefaultXYDataSource ("Opened");

addValue result
using
value = 5,
columnHeader = "January".

addValue result
using
value = 10,
columnHeader = "February".

addValue result
using
value = 15,
columnHeader = "March".

addValue result
using
value = 7,
columnHeader = "April".

I enjoyed your collaboration if you have worked with graphics stacked bar.
Hello

You were very close.

Try to use the Fuego.Chart.XYZDataSourceImpl object. This will give you the third dimension that your stacked bar chart needs and these attributes in the addValue method:
value
rowHeader (maybe that's where you set your month name)
columnHeader (maybe it's where set it to 'Open' or 'Closed' in your example)

Dan

Order of stacked bar chart
I am a chart to stacked bar and I needt to control the vertical bars. It seems to be always sort by alphabetical order of my descriptions. My descriptions are "Master of No", "Pre-Master" and "master".
I want to:
Master's degree
Previous control
No control

It shows always like:
No control
Master's degree
Previous control

How can you check this?
The order of the columns in the criteria tab gives the order in the chart to stacked bars.

concerning

John

http://www.obiee101.blogspot.com/

Stacked bar chart problem

Hello, with ColdFusion 8 this product code bars stacked double. The two chartseries are needed to produce a stacked effect. A bar battery is labeled 'Programs' and the second is titled '' registered programs. '' They are identical and contain both the data I want to display so of course, I want only one of them. Suggestions? Thank you.
< cfchart format = "flash" showlegend = 'yes '.
chartheight = "350".
chartwidth = "350".
showxgridlines = 'no '.
showygridlines = 'no '.
showborder = 'no '.
FontSize = "12".
FontBold = 'no '.
FontItalic = 'no '.
xaxistitle =""
yaxistitle = 'Count '.
show3d = 'yes '.
rotation = 'no '.
sortxaxis = 'no '.
showmarkers = "yes" seriesplacement = "bunk" >
< cfchartseries type is 'bar' query = "qAllProgramsCount" seriescolor = "blue" PostesColonne = "title" valuecolumn is 'prgCount' serieslabel = 'Programs' >
< cfchartseries type is 'bar' query = "qEnrolled" seriescolor = "red" PostesColonne = "title" valuecolumn is 'prgCount' serieslabel = "Registered programs" >
< / cfchart >

It never fails that as soon as I post a question I understand... in any case, it was them differentiating on the 'title' in my two queries. I made them the same thing and alto, a bar! Hope this helps someone.

Bar chart stacked - strange behavior on display null values

Hi all
I'm trying to graph a county of the end dates of the activities over several years by months grouped by project.
The problem I have is that there is a gap of 3 months where none of the activities that I am tracking complete. The default value for the stacked bar chart is to ignore the columns with no data (in my case it October-December 2015).
To view these any given month I went to properties graphic and ticked the box "Include Null values. At this point, I get a very strange behavior. Once this option is selected, the legend explodes, showing each project in the database regardless if it meets my criteria for analysis.
Has anyone another considering that happen? I'm doing something wrong?
If it's important I'm in the OBI 11.1.1.7.150120
Thank you for your help,
Kevin Wolfe

Hello

You have a filter on the list of projects you want to see?

Based on the way you describe your analysis I guess you don't have any what filter on the list of projects, but some of the filters on the other dimensions/attributes and these filters were limiting the list of projects.

If this is the case then what you see is not a weird behavior, but everything you've asked your analysis.

"Include null values" is not limited to the time dimension, it fits any dimension of your analysis, so no filter on projects = all projects.

How to display the percentage on the bar chart.
Hello

Can someone tell me please how to display percentages on a stacked bar chart. All the time, it shows actual values.
For example...

| | | | |
| |18% | | |
3000 |
| | 70 % | | |
2000.
| |12% | | |
1000 |
-----------------------------------------------
T1 T2

I hope I could describe it. :-)

Thank you
Hello
Thanks for your reply. I used your code. But still, I do not get the correct result. The value in the xml file is
I say 12 so it should be displayed as 12%, but instead I get 1200%. If I divide the value of 100, then I get
correctly by 12%. But the beaches on the X axis is disrupted. Sound also get divided by 100, and instead of
0 - 40-80
it becomes
0-.4-. 8, which I think its get divided by 100.
Is there a way I can avoid this?

Thank you
Krishna

Request for 3D stacked column chart

Hello
I had two 3D histograms. Each table has separated the SQL statement, which are very similar only difference is in the WHERE clause. Now I would like to combine the bottom two codes into one and create only a single 3-d stacked column chart.
CODE 1:
Select
link null, label RECEIVED_DATE, COUNT (TICKET_ID) as "received".
Of
QTMT_TICKETS
where
RECEIVED_DATE BETWEEN sysdate-7 AND sysdate AND
BATCH = 1
Group
RECEIVED_DATE
order by
RECEIVED_DATE / / desc
CODE 2:
Select
link null, RECEIVED_DATE, COUNT (TICKET_ID) label as "rejected."
Of
QTMT_TICKETS
where
RECEIVED_DATE BETWEEN sysdate-7 AND sysdate AND
BATCH = 11
Group
RECEIVED_DATE
order by
RECEIVED_DATE / / desc
Would you please so kind and help me with this? I tried to do it, but failed.
Thank you very much and best regards,
Vladimir

Refer to this link to add an additional series: How to create a stacked bar chart

Thank you

Tony Miller
Software LuvMuffin
Ruckersville, WILL

How can I prevent my graphic line to cover the bars in my bar chart?

I have a stacked bar chart, and I have horizontal lines along the vertical axis (essentially the tick marks which are dotted lines that extends from left to right). The problem is that they are first bars and they need to be behind bars (in other words not visible in the places that they intercept the bars)
I hope that I don't need to create a background for the lines layer, because it is the source of my next question/problem.

assuming that you created it in illustrator - selects the lines - and then in your main menu click on object > Arrange > Send to back

Percentage of the stacked bar graph display
Hello

Can someone tell me please how to display percentages on a stacked bar chart. All the time, it shows actual values.
For example...

| | | | |
| |18% | | |
3000 |
| | 70 % | | |
2000.
| |12% | | |
1000 |
-----------------------------------------------
T1 T2

I hope I could describe it. :-)

Thank you
One of {OracleBI} \web\app\res\s_oracle10\popbin. Did you reboot the server presentation and the javahost?

concerning

John
http://obiee101.blogspot.com

CFChart stacked
I have read most of the CFChart posts but cannot get this work exactly how I want it.

What I need is for the chart display the TQ along the X axis and the counts on axis Y. So I need two values displayed as bars stacked for every TQ along the X axis. The first value is the InsideTQ, the following value is OutsideTQ. The InsideTQ and the OutsideTQ equal the total number of points for a TQ value.

for example value TQ 5 has a counter of 60 InsideTQ and 55 points to OutsideTQ, TQ 5 value should a total of 115 points.

This part works pretty well. The problem is that I have several initiators for each TQ and each InsideTQ and OutsideTQ. I want to display the TQ values along the x-axis (1 to 15), but they appear only once. Each value of TQ I want creators with their entrance and exit of the values displayed as stacked bars.

for example initiator Y 5 TQ inside 60, 55 outside the next outdoor show 35, within 40, 5 TQ, author Z.

If she's not too ask, I would also always for the InsideTQ of green screen and the OutsideTQ to display red. When I try to force the colors I find myself with the bar stacked together the same color.

What I usually end with is the TQ ranging from 1 to 15 for the first author and then again 1 for the next customer.

Here is my request and my table. Thanks in advance for your help...

BTW - I use one then a < CFOUTPUT > < CFLOOP > instead of < CFOUTPUT > with a GROUP because this code lies in a report that is already included in the < CFOUTPUT > tags.

Try the joint.

How to create a 'Floating Stacked Bar' graph

Hello world!
My requirement is to implement a graph as follows:
https://DL.dropboxusercontent.com/u/18609389/ScreenShot350.jpg
It seems to be a 'Floating Stacked Bar', but I'm not able to find the tutorial or reference to do.
For each year, I have to draw a red bar at the top with a positive value, and a blue bar to the downside with the negative value.
I know how to get the data, but down exactly know how to compose the query VO waiting for the chart.
Thanks in advance!
Jose.

Hello world

Finally I did after days of fighting. The main reason it has not worked is because I was mistaken with the type of graph that I was actually looking for which is:

Subtype = "BAR_VERT_STACK".

https://DL.dropboxusercontent.com/u/18609389/ScreenShot354.jpg

On the data, to a line for each series, so I have 2 lines (red, blue, data) and a column for each year (Group).

It may be useful to someone.

Kind regards

Jose.

Bar chart to the standard (for example in the sale of sample)
Hello

There is a chart in the catalog of sample sale I want to use but I don't understand how it's done. Maybe someone here can enlighten me.

This is the report of the variability in the sample - file hierarchy and distribution sales. The graph is a vertical bar chart, which also displays a horizontal line (the median). The graph I'm doing is a vertical bar stacked with a standard (such as the median) inside. Does anyone know how they got this right horizontal line in the graph. I tried to build an additional graph in the same report, but could not look the same.

Thank you
Yvon
Hey the orbit.

I have no opinion on the report... but if you want to add a standard 'hardcoded', it's easy to do.
In your chart, you go to the axis scale. In the pop-up window, click the button modify scale markers.

There, you can add a line or a range for your report.

I hope this can help you.

KR,
A

How to manage data in css bar chart plugin

Apex 4.2 running against database 11 g. I have a CSS bar graph plug in the regions. Now, if there is no data found in a given region the region of bar chart is empty. I want to display a message in the box indicating no data found rather than having just a blank area but I don't see how. When I look at the plug of standard attributes the 'No data found Message attribute a' is disabled so I'm not able to check it out.
The data source for the bar chart is a collection that is populated by calling a stored procedure that returns a sql query string.
Any suggestions for how to manage this?

nunyadba wrote:

Apex 4.2 running against database 11 g. I have a CSS bar graph plug in the regions. Now, if there is no data found in a given region the region of bar chart is empty. I want to display a message in the box indicating no data found rather than having just a blank area but I don't see how. When I look at the plug of standard attributes the 'No data found Message attribute a' is disabled so I'm not able to check it out.

The data source for the bar chart is a collection that is populated by calling a stored procedure that returns a sql query string.

Any suggestions for how to manage this?

One way is to create shadow graphic HTML containing the "no data found" messages for each of the regions. Use Exists (SQL query returns at least one row) conditions to display the chart area when relevant data exist in the collection, and NOT Exists (SQL query returns no line) conditions to show the "no data found" region when it isn't.

Another would be a dynamic action that verifies the existence of the graphical mark in each region and injects "no data found" messages where it does not exist.

Change the plug-in (if allowed by the license) would be the last option.

Display the values of the 2D stacked column chart
Hello

I use the following sql which shows the percententage of errors in a month
```
SELECT NULL
,      TO_CHAR(MA.DATE_LOGG,'Mon'),
sum(decode(el.error_type,'On',1,0)) "Ons", 
sum(decode(el.error_type,'Pa',1,0)) "Prt",
sum(decode(el.error_type,'No D',1,0)) "No D",
sum(decode(el.error_type,'Sys',1,0)) "Sys",
sum(decode(el.error_type,'Oth',1,0)) "Oth"
FROM
       table1 MA, table2 EL, table3 CR
       WHERE
                 MA.ERROR = EL.ERROR
       AND       MA.ERROR IS NOT NULL
       AND       MA.COUNTRY = CR.COUNTRY_CODE         
      AND       TO_CHAR(DATE_LOGG,'YYYY') = nvl(:P5_FILTER,to_char(sysdate,'YYYY'))
      AND       CR.REGION_CODE = NVL(:P5_REGION,CR.REGION_CODE)
GROUP BY TO_CHAR(MA.DATE_LOGG,'Mon'),  trunc(ma.date_logg, 'Month')
ORDER BY  trunc(ma.date_logg, 'Month')
```
Now the values are displayed correctly, however, the stacked bar displays the real percentage value, for example 60% on stacked bar. When we mouse over the bar it shows "No D", Sys, Oth. Is there a way to display permanently type Decode and percentages?

Apex 4.1 / 11g

Thank you
Sun
Hi Sun,.

If you would like to add the series name in the values displayed in the bar of the items themselves, then you will need to customize the XML graph and update the tag to embed {% SeriesName}. I've added an example for my sample application, indicating where the XML code must be changed: http://apex.oracle.com/pls/apex/f?p=36648:90. For a complete list of available AnyChart keywords, such as % SeriesName, please see the AnyChart online documentation: http://anychart.com/products/anychart/docs/users-guide/label-text-formatting.html?fromtree.

I hope this helps.
Kind regards
Hilary

Create a popup on mouse over in the bar chart
Hello

I want to create a popup mouse over event on the bar graph, but I have not found the corresponding property in the property inspector. Is it possible to display a popup on mouse over in the bar graph?

At the present time, I am able to create a popup in the bean to support based on the click event. I want to line up on the bar in the chart that was clicked. But now, it's to be aligned for the bar chart as a whole (as above the chart under the chart) when I use 'RichPopup.PopupHints.HintTypes.HINT_ALIGN_ID, source '. Is there a way to align on the particular bar?

Any help is greatly appreciated

Thank you
KK
Hello

don't think that you can align in a region within a component. The property id align expects a component reference. Note that the mouse on a bar chart does not select the bar, which means that the data in the link layer are not defined in progress (just in case the data in the pop-up window to be dependent)

Frank

Using cfchart stacked bar chart?

Similar Questions

Maybe you are looking for