Using getDate in input field and display of the daysLeftUntil in another area...

Similar Questions

• is there a way to make the game with the input field and interact with the answer (createjs)?

  Hello

  createjs is great, but I think it's a bit limited by a full game as to put your name and lunch the game or the question precise response, then you can trigger an animation

  I searched the web for this behavior in easeljs but no luck

  the question is is it possible if yes can you provide an example

  Thank you

  It's my favorite workflow and I guess that's idiosyncratic.

  I prefer the javascript/jquery code in sublime text and not the flash because of the set color id shaped sublime text and because I like or need to have both the js a html files open at the same time to edit both.

  I'm usually all code of easeljs and graphics in the flash ide and when it's over, I work directly with html and js files in a sublime text to manage things that you can't do in flash.

  I don't see a big advantage for that in this situation so I understand the quibbles, but in some situations (for example, right left text), it is much easier (for me at least) to edit, debug and test outside the flash id.

• Total of fields and to change the font for values 0 color

  Hi, I'm relatively new to scripting, and I have created a form that is used both as a PDF to fill and print.  It's a decklist and I want to be able to total the fields for each specific type of map to display the toal in another area, and then add those fields for a total of bridge.  I can easily accomplish this depending on the sum in Acrobat X using the but when printing the list empty to be used by players at an event the zeros print in total fields and confuses the younger players.

  I would use a calculation script custom that totals fields and checks the total and also if it's zero changes the color of the font to white.

  Any help would be appreciated.

  Or you can put the code below in the validation.

  If (event.value == 0) event.value = ";

• I've created a form that uses the value field text to fill the text of another field.  Does not take into account changes

  I've created a form that uses the value field text to fill the text of another field.  However, if I need to change the text, the second field does not update this change.  Instead of reset the form each time, is the Javascript code to update the fields if they have been modified?

  For example I Text1 and Text2.

  When I type in Hello in Text1 I see Hello in Text2.

  Later, if I decide to change to Goodbye Text1, Text2 remains Hello.

  The shape of the hoe can recognize this change?

  Thank you

  Edit: I think I have misunderstood the situation.

  If you want to both fields have the same value, just to give them the same name.

• Why the continuous measurement and Logging in LabVIEW 2012 Project uses strings instead of Enums and orders from the queue?

  Hello!

  I noticed that the continuous measurement and a project in LabVIEW 2012 Logging using chains instead of enums and orders from the queue. I wonder if there is a good reason for it?

  Kind regards

  Anguel

  First, string vs enum debate is probably the version of LabVIEW vim vs emacs. There are good arguments on both sides, and I doubt that there is always a "winner".

  A brief summary of our reasoning for the current state of the project examples:

  1. We used enums for the state machine because it is self-contained. A state machine will never tell himself to enter a State, he does not know. Knowing (as the programmer) all possible States with the help of an enum allows you to enlist the compiler in order to help us avoid mistakes to change the time (because you can't quite out an enum and LabVIEW can be said if you are not covering all cases to a structure of the case, etc..).

     Enums provide greater protection and rigidity by ensuring all withdrew at the time of publishing. This is often the 'default' recommendation that we do.

  2. We used strings for messages in queue manager because the producer of message and the message handler could be independent processes that are reused or traded. Channels avoid the need for the compiler to be able to connect the orders and push this responsibility to the programmer. This allows you to develop some sub-components independently as long as you agree to a series of channel commands that you can manage - you need not to share a file 'messages.ctl' or 'states.ctl '. It is conceivable a loop of message management a message it does not, how you can decide to either silently ignore it or will trigger an error (as we do in the model). The strings make it also easier if you want to swap the queues of LabVIEW outside by a TCP implementation for network vacilitate or intra-Processuse communication where the other end may or may not be written in LabVIEW.

     Channels to provide more flexibility (that is, you can add new commands to an existing via plugins system, you can pass parameters as part of the string, etc.) at the expense of pushing her potential errors at run time and to put more responsibility on the programmer.

  3. The actor's gifts frame a 3rd option - using classes such as messages. For me, it combines many of the advantages of these two enumerations (strictly typed, change errors) and strings (flexible and scalable), but with the disadvantage of being somewhat less transparent (you understand OO, be comfortable to navigate through a multitude of screws, legacy of understanding, etc.).

  I don't know there are other reasons, others to the breast OR had or seen as we validated models and examples of projects in-house, but here are my reasons. We know that we can not design for each situation there - our goal is to get useful models against new users to make them aware of what well thought LabVIEW programs are similar to experienced users know their applications better and I hope they do not hesitate to change what we provide or create their own designs, when they feel it's necessary. (On a side note, please share what you come up with - a community of experts sharing models would be really useful to us all LabVIEW users).

  Best regards

  Simon

• Ive Osx 10.9.3 using Safari 7.0.4 and try all the remedies (allow you to uninstall old adobe plug-ins etc.) I still get an error notice can't complete installation. ? What next pleaset

  Ive Osx 10.9.3 using Safari 7.0.4 and try all the remedies (allow you to uninstall old adobe plug-ins etc.) I still get an error notice can't complete installation. ? What next pleaset

  Try this installer: http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_osx.dm g

• screen resolution of the remote desktop: fonts and icons of the remote desktop window are so small they can barely read.

  Remote Desktop screen resolution

  I've recently upgraded to a Windows 7 laptop from a computer in Office XP.

  On my old machine, I use a VPN clent and Remote Desktop connection to use my work computer (my company uses XP on their machines).  If I try to connect from my computer Windows 7, fonts and icons of the remote desktop window are so small they can barely read.  Change display options in the settings of remote desktop doesn't affect the size of the window, not the resolution.

  It is a problem because I am stuck using my old system to work remotely.

  Any ideas?

  All you have to do is to reduce the resolution of the screen that you use to connect to your Remote Desktop Session.  More the higher resolution and the characters will be on your screen, and when you connect to Remote Desktop.  In my case, I lowered the resolution of my screen to the House for the resolution of the screen in my office.  It works perfectly.  To reduce the resolution follow these steps:

  1. click on start

  2. click on Control Panel

  3. under appearance & personalization - click on adjust screen resolution.  You may get a message indicating that your resolution is not at the optimum, but don't worry you will still be able to see the letters on your screen.

• Screen of remote desktop: fonts and icons of the remote desktop window are so small

  I try to connect via Office server2012 windows remotely.

  The remote computer is a Server Terminal server where at least 240 users are connected.

  The fonts and icons of the remote desktop window are so small, all other users who are connected to the same server have no problem with the font size or the size of the window. everything seems normal

  But when I connect remotely, the size of the window and the police are so small. I can't use any application on remote because of the size of the font.

  Please suggest...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Request of MSN Games I want to play Spades with my friends, I know personally, and also at the same time, they are online in MSN Games.

  Original title: query MSN games

  I play generally stings in MSN Games. I play with these opponents, who are are the corresponding animation.

  But suppose I want to play Spades with my friends, I know personally, and also at the same time, they are online in MSN Games.

  Is there a way I can do?

  Yes ReCkle$ $ there is a way

  because deleted msn games this option of Spades online, u do not have the section 'invite' as b4, you will need to:

  (1) you and your partner open Spades and click on the 'standard' at the same time game. After a 1 ~ 5 try u should be and your friend partner at the same table.

  * your 'level' and your partners must be close to u at the same table.

  Hope this helps :)

• How can I activate Director 11?  D11 I loaded on my MAC from a disc.  In the activation window, the ups and downs of the choice of activation are cut.  The choice of the internet is enabled, but the window says"Activation"-no link. "  But I am conn

  How can I activate Director 11?  D11 I loaded on my MAC from a disc.  In the activation window, the ups and downs of the choice of activation are cut.  The choice of the internet is enabled, but the window says"Activation"-no link. "  But I'm connected to the internet.  The phone option is not available.  When I call Adobe directly, phone mail says that the Director is not supported.  Suggestions?

  Moving to the Director

• Use the listbox control to select several channels and display on the chart

  Hello everyone!

  I have a problem using the ListBox selection mode 1 or mode items. I have 6 channels of data, and I have a 2D chart. I am able to reterieve the signal names in the list box, but I want to be able to choose one or more signals to display on the chart. I used the table to index my 2D data are connected and then the output of the index table is connected to the graph. I had to use the listbox control as an index for the table to index and display the data in the index selected for display on the chart. I used lisbox as the value property nodes, the line active and all but not able to display signals on the graph. I have attached a code example to show you what exactly I'm looking.

  Any suggestions will help a lot.

  
  

• Year (only) extracted from field Date and display in the text field

  I need extract the year from a field of date entered by the user and display the year in a text field. Can someone help me with the correct script to do this?

  Hello

  It is quite easy to achieve with FormCalc.

  In you the output of the date fields event add the following code:

  textField1 = Num2Date( Date2Num($.formattedValue, "MM/DD/YYYY"), "YYYY")
  

  Note: This example assumes that your date field formats the date with "MM/DD/YYYY". You may need to change the schema to make it work for your purpose.

• I got two sources of camera the same audio recording - how to use multicam to audio synchronization and display TWO cameras simultaneously

  I had two sources of camera recording the same audio - I want to be able to do is use mulitcam SYNCHRONIZE the audio and video at the same time and be able to use the two clips simultaneously in a video - multicam - how can we use the TWO videos? In Multicam, I can only go to one video at a time - is to detach anyway, so I can trim two camera responsition camera and 1 on a 16:9 screen? What would be the best way to do this? Any help would be welcome - Ty

  

  Two PPut copies the multicam in editing element, one on the other.

• Use a tag input as a placeholder for the current value

  Hello world

  I don't know if this is possible, or even if it's the right tag to use to achieve the following objectives.

  I would like to use an input field to be a field that also displays the current existing value of this field.

  Example: Zone 1 = value1 <-1 value is the present value, say in a database somewhere, or memory

  but, now I can move my cursor inside the field area where value1 is and replace it with value2

  Zone 1 = value2 <-now somewhere in memory 1 field, hold the value2

  If this is not clear, please let me know, I'll try to explain it better than I can.

  Thank you

  Neil

  I think you want the placeholder attribute: http://www.w3schools.com/tags/att_input_placeholder.asp

  To make it work on IE9 and below: https://github.com/mathiasbynens/jquery-placeholder

• Text with LOV input is not displayed in the user interface

  Hello

  I'm new to adf.

  I am creating a LOV Type "Input Text" using Jdev 12 c, but when I run it its only display text of the entry. The Search icon is missing. How can I get that? Check the pictures below

  

  But the page is displayed without the search icon. Check out the image below.

  

  Please help me fix. His Jdev in 12 c.

  (2) I need to make two input visible and invisible text in adf:query based on the choice list value (value dropdown) how I can make?

  It was with the criteria that "CONTAINS" operator With the help of "EQUAL" solved the issue.