picture of monitor lost once booted

Similar Questions

• My second monitor lost functions of the menu and the image.

  Original title: monitors identified with reverse pilots

  I upgraded my second monitor.  After loading the new driver for it, he was assigned to the old monitor and the new monitor is now the old driver.  Features on the old monitor do not work and I had to make the new monitor my primary monitor. It's ok but the old monitor lost functions of the menu and the picture is now crap.  Also, when I open PS it is said that the profile of the monitor is deffective. I ran the calibration software, but that did not fix it.

  It looks like this: in the display settings, in the drop down menu below the pictures of the monitors, number 1, said SyncMaster 2443BWT on NVIDIA GeForce GT 9599.  Number 2, said SyncMaster digital S23A350H on NVIDIA GeForce 9500 GT

  This is backwards.  How can I get the correctly identified.  or is it important.

  Thanks for any help.

  Loïc

  I ended up uninstalling the driver for the 23 "and disconnect.  This put the 24 "at number 1 and automatically back to the only driver left, 24".  Then restarted with the 23 '' reconnected.  It assigned the pilot generic and in fact number 2. Yes the 23 "works very well on the generic driver and I have the right driver for the 24" so I'll leave well enough alone...  I had downloaded the drivers from the monitor on the Samsung website according to the instructions on my cd that came with them.   I never thought to check the updates on my nvidia graphics card.

  Thank you very much for this information.  I'll do this and keep my fingers crossed he doesn't mess up something else.  This Vista is so tempermental.

  Loïc

• Hi, I just downloaded trial of adobe lightroom. However, when I try to import my images it does allow me to. It shows the preview where I choose my pictures to import, but once I click on import, it is said that it is impossible to import my thread

  Hi, I just downloaded trial of adobe lightroom. However, when I try to import my images it does allow me to. It shows the preview where I choose my pictures to import, but once I click on import, it is said that it is impossible to import my files, which are in jpg format.

  Hi chelseac46438928,

  Please make sure that you have permissions to the folder where you try to import images.

  Or you can try to change the location of import of images in Lightroom.

  Kind regards

  Tanuj

• Early 2011 MBP 15 "dual SSD - lost with boot camp edition

  Hello community!

  I lost my mind with boot camp troubleshooting during the last week. This is going to be confused reading, but I'm afraid I got worse... So please try to face me.

  Starting point - of course I can install Windows 10 on my MBP 2011 early!

  Material

  Early 2011 MBP 15 "with Intel HD 3000 and AMD Radeon HD 6750M

  and the optical drive, replaced by an other SSD with a caddy

  Of course, I didn't have an optical drive on the spot so I realized that I need to install to get the option to boot from USB - I did find. I managed to make a bootable USB from. ISO with UNETBOOTIN. First of all, I got score of huge problems with that I finally managed to Dodge with diskpart - software on Windows Installer USB after NVRAM reset before each attempt to install with CMD + Option + P + R, I had to also remove the OSX SSD during the installation of VICTORY for everything the world some boring as Windows could not update the configuration to start the computer. Unable to continue installation -problem.

  After all:

  -> I managed to install WIN10 on my MBP education

  -> A lot of festivities fun! < 3

  -> After installing the bootcamp drivers all active windows went to "invisible desktop on the left" (I closed the other workstations...) where I managed to lift one of the windows on the central office with lucky and "move" action (I have no idea...)

  -> after reboot apparently drivers Intel HD 3000 went haywire and I got black screen on black with details in black (black screen Uni)

  Conclusion: I try Windows 8.1 (pro) because at least he is supported by my Mac AND it has same installation and should work.

  At one point I tried to use my old drive via USB to install Windows 7 and 8.1 pro

  -> PROBLEM CDBOOT: couldn't find the BOOTMGR

  -> I moved along back USB and WIN8.1

  8.1 Windows Pro was installed easily, with the same procedure. When running boot camp display drivers turns black during the "Intel - graphic" installation period. I can confirmed that starting mode safe mode when the screen works, but I can't install Catalyst drivers-> so I can not play games that was the only reason for dual boot. In addition, there is no sound. So lack of drivers: no picture, no sound.

  There... I think I forgot to say something. I was hoping just that if someone could help me with this problem. I lose my head here. I have not really direction where to go next, but I have a few options I can try after that I understand my morale of my troops.

  1. Remove my boot OS X SSD, switch my SSD Windows instead of him and put my Superdrive. So I would basically just install windows. Earlier, I had 8 windows work via the DVD and bootcamp.
  2. Try to play with the drivers on Win8.1 more
  3. Reinstall windows. There may be something wrong with my. ISO or USB?
  4. Delete the EFI to correct CDBOOT?

  Thank you in advance!

  You must use Bootcamp Assistant for everything, including the form/partitioning implementation and the removal of partitions...

  I would like to reformat the second SSD (on which should be installed W10) with diskUtility. Then start bootcampassistant on SSD1 and do all this.

• Two monitors - lost Web Site

  I have 2 monitors on my system. I is not need to use the second monitor all the time, so I turn it off. Sometimes, when I click on a web site

  It does not appear on the main screen. The button for this web site appears in the background of the main monitor bar. If I turn the

  second monitor back on the web site is on the second monitor and I can easily drag it to the main monitor. "My question is - is there a way

  to transfer this site lost to the main screen without return - turn on the second monitor.

  I think I found the answer to my own question. As I said previously, the lost site is on the second monitor when the power is off, but the button for this lost site is on the bottom status bar of the

  main monitor. If you click this button, then left-click the displacement of Word on the small window

  which rises, you can move the site using the left/right arrows.

• Why my picture is very blurry once I publish the project?

  I inserted two pictures in my project (8.01 Captivate) and they are the two fuzzy relly once I've published the project. Any format I save it, still blurry. I have change the pixels of the picture and reinserted and still nothing.  Any ideas on how to fix the problem?  frustrated...

  You did a lot of scaling, ways took my Calculator: your original image is 1700x2200px! And what is the resolution of your slides? Typical screen resolution is only 72-96 dpi. And a mobile browser has a typical width of 300-360px... The photo is taken up all that space, even in this case it was too much.

  But JPEG is a compression format with loss, what quality did you choose? In Photoshop, resize your photo to the resolution you want it have in Captivate and try again with a non-une as PNG24 lossy compression.

• I have reset my master password, but another doesn't, and Firefox crashes when I click on "device lost" once again. Name + pw OK.

  I have a new computer and you want to synchronize my favorites FF etc. Email and password are accepted. I didn't know my activation code. I checked the site and I clicked on lost my device to generate a new password, but this new activation code was scored an error. Now FF won't give me another activation code if I click on Lost again, but simply crashes. I tried to set up a new account with a different email address, but what is denied. I'll never be able to synchronize my account on my new computer?

  Hi jsfb,
  There is a new synchronization, go in "subject: accounts."
  Using an older version of sync? How to upgrade

  Try these steps, if you need assistance please let us know!

• Photosmart C4750: Lost my boot drive for printer Photosmart C4750

  I lost my installation disc for my printer and need to set up your wireless connection, so I can print without being attached to my laptop by the cable.

  Everything on the web site of HP.

  http://support.HP.com/us-en/product/HP-Photosmart-C4700-all-in-one-printer-series/3794613/model/3831738/drivers

• Disk space and lost partition boot camp Windows 10 El Capitan

  Was trying to install windows 10 for the first time and I am unable to locate the Boot Camp partition for the installation of windows after restart alt + in windows installer.

  Disk utility also shows missing 50 GB partition.

  Here are the:

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  dLast login: Fri Mar 18 18:08:26 on console

  WiFi-131-179-43-25: ~ list of Austin$ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 250.1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650,1 MB HD

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 199.0 disk1

  Logical volume on disk0s2

  9B55AED4-119C-44D3-90CC-735356BFD6C5

  Unlocked encrypted

  / dev/disk3 (disk image):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_partition_scheme disk3 + 18,1 MB

  1: Apple_partition_map disk3s1 32.3 KB

  2: Apple_HFS Flash Player disk3s2 18.1 MB

  WiFi-131-179-43-25: ~ list of Austin cs $ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 822D4439-B5F0-492F-927E-479F175CCDD8

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 250140319744 B (250,1 GB)

  Free space: 50788065280 B (50.8 GB)

  |

  +-Physical volume BA074CDF-10E2-41F3-BCF1-1500780CE658

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 250140319744 B (250,1 GB)

  |

  +--> Logical volume family 94ABCFD9-91C2-4542-A81C-9954CA69F1CC

  ----------------------------------------------------------

  Type of encryption: AES - XTS

  Encryption status: unlocked

  The conversion status: complete

  High level queries: secure

  |                        Password required

  |                        Accepts new users

  |                        A visible users

  |                        At the Volume key

  |

  +--> Logical volume 9B55AED4-119C-44D3-90CC-735356BFD6C5

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 198999932928 B (199,0 GB)

  Reversible: Yes (unlock and decryption required)

  Put the situation: Restart required

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  WiFi-131-179-43-25: ~ Austin$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 490234751

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 488555312 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  488964952 1269760 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  490234712 7

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  WiFi-131-179-43-25: ~ Austin$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-490234751] < unknown ID >

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  WiFi-131-179-43-25: ~ Austin$

  It is your free space.

  Free space: 50788065280 B (50.8 GB)

  You will have to perform first aid on the drive to get it back.

• How can I get the picture my monitor A231H-centric? It's to the right.

  How to center the image on my monitor A231H?  It's too far to the right.

  Hello

  Manual - Page EN-15 (position):

  User manual

  Acer

  User manual

  1

  626,3 KB

  24/06/2010

  Download

• Computer crashed and lost the Boot Error 1713 menu

  original title: computer broken start menu lost and Micorsoft Word 2007 Error 1713 when I try to reinstall word. System restore system maintenance proven unable to complete the restore process

  Here is information on the error 1713 and the installation of Office that can be useful:http://support.microsoft.com/kb/926279.

  If this does not work, please transfer your question in the forum Office Word:http://social.answers.microsoft.com/Forums/en-US/officeinstall/threads , where experts in Word will be happy to help you.

  If you want to address the problem of the restoration of the system after that another problem is solved, post here and we'll see what we can do.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• EliteBook 8560p - LG736EA #ABB: Elitebook 8560 p - no display + external monitor image at boot

  EliteBook 8560p, product number: LG736EA #ABB, out of warranty.

  I got 2 or 3 times in the past year, when the behavior was the same, but he dissapeard after a few minutes/hours.

  This morning once again:

  -When the startup everything works fine (I hear Windows startup sound) but no image appears on the computer screen or even on HDMI TV ("No signal" appears on the TV, it worked fine before).

  I tried a few suggestions as remove the battery + by pressing the power button for 30 seconds to reset-no luck online.

  I'm looking forward to see if it will work in the evening, but until now I need some advice:

  -would it be by a faulty inverter?

  -other opportunities outside the UPS?

  -What is the part number for the converter to display? link? I can't find it on http://partsurfer.hp.com...LG736EA but maybe my eyes were Misty :-)

  -J' have some assambling/desassambling experience, I guess I can DIY replacement of the ups, right? :-)

  All ideas are welcome :-)

  Thank you with respect.

  Hello

  computer science is not an exact science

  You have experience of course! But it is assumed that Service Center have more resources (pieces of overlap).

  The best solution in my opinion is the best solution.

  Of course will be better request a quote.

  Concerning

• This is crushed my PC windowc, lost my boot drive for HP officejet 5510 all in need of help to reinstall

  Still, I crushed my PC it works windos xp. I lost my start up disk for my hp officejet 5510 all in one. Can you direct me to the site that allows me to download the installer for my printer?

  Thank you, Sue.

  Hi Sue,

  You can download the installer for the software complete features on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-23606-3&cc=us&DLC=en&LC=en&OS=228&product=311255&sw_lang=

  Kind regards

  DP - K

• My image of the PC monitor flashes once then stays black at startup.

  NO IMAGE on the screen at the start except for a MILLISECOND FLASH then BLACK SCREEN.

  AUDIO works OK.

  When I turn the monitor off and then after a few seconds, the back, I have MS FLASH then BLACK SCREEN.

  When I turn the monitor off and then after TEN MINUTES, return, I get MS FLASH then BLACK SCREEN.

  When I RESTART (reset) the Tower, I get the same result as the line.

  I've done two attempts, the last attempt after a wait of 20 minutes, and the result was successful.

  Windows has asked for me to choose a Setup to continue... I chose NORMAL and now everything looks OK.

  This happens everytime I turn on, I have to go through the same procedure each time.

  I am also convinced that it is not good for the health of my pc.

  Please can someone... Thank you

  Hi George,.

  It seems that the monitor has failed.

  Another aspect of the screen that does not fairly regularly is the inverter.

  As he begins to come out, the monitor does not work during any part of the start-up.

  He may be able to gather enough power to turn on the monitor if, as in this case, it is left on a certain period of time.

  You can try this monitor on another computer, if this option is available, to see if it exhibits the same behavior.

  If so, it is reasonable to assume that this is a failure.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lines covering the picture in monitors

  Hello

  I've recently updated for first CC and I am facing a problem I've ever had to deal with before. I'm editing images of 5 d mark II and I'm unable to see the image correctly on the screen when it does not move as lines cover the monitors (see image below). the image appeared as soon as the video plays.

  Does anyone know where the problem could come from?

  Thank you very much

  

  Go to file > project settings > General and set the software-only rendering engine, that help?

  Display the specifications of your computer, please.

  MtD