Using keyboard to screen print screen

Similar Questions

• How to detach the screen from the keyboard, and how do I use the touch screen without stylus?

  I have a gateway M285 ta6 t2300 clocked at 1.6 ghz dual core 1 GB 40 GB combo windows 7 tablet laptop 2-1 d. I don't have a pen for the touchscreen, but because I bought it used... I would like to know if I can use the touch screen using my fingers or do I have to buy a pen and if so what kind? Also, I would like to know how to detach the screen from the keyboard.

  Hello

  I suggest that you go to the Gateway Web site and download a manual for the model that will show you how to use it.

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  See you soon.

• I use the touch screen of Windows 8, and after that I use it, my mouse pointer disappears

  My problem is similar to other positions, but not exact.

  When I use the touch screen of my computer in windows 8, the mouse disappears and does not come up until I restart the computer.  After the restart, if I use the touch screen, even once, the needle does not again.

  Hi Tony,.

  This problem is caused due to conflicts of device, you will not be able to use the touch cursor when a mouse is connected. You will be able to tap on the touch keyboard, but when you scroll or drag the mouse cursor disappears. I suggest you to disable one of the device and check if it helps.

  To disable the touch screen, refer to the following steps:

  a. click the Start button and click Control Panel.

  b. access the material and audio.

  c. click Pen and Touch.

  d. click on the contact tab.

  (e) uncheck the box use the finder as input, this disables touch and stylus.

  Otherwise, you will need to disconnect the mouse.

  Please reply with the status of the issue so that we can better help you.

• How to factory reset an imac using the second screen

  How to factory reset or restore my system using a second screen

  
  

• How to remove the message "... now uses the full screen"?

  When you switch to full-screen playing a video, the message appears that the site now uses the full screen, which is often boring because it blocks the part of the screen for a few seconds. How this message can be deleted?

  In Firefox 40 and 41, you can probably remove this notification by setting full-screen - api .approval-required to false.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• Portege R835-P88 - keyboard and screen replacement

  Hello!

  I own a R835-p88, which in US, I bought a year ago. Because I had a food spill last week on the laptop, now I need to replace the keyboard and screen. As I live in the UK, I would like to buy in the UK.

  My question is:
  TOSHIBA P000540040 KEYBOARDOEM for Portege R705 R830, R835 (UK) will be a replacement http://www.ebay.co.uk/itm/New-Toshiba-Portege-R830-UK-Original-Genuine-Keyboard-/110758413538?pt=UK_Computing_Laptop_Keyboards&hash = item19c9b744e2?

  Also for the LCD screen would be
  nels http://www.eBay.co.uk/ITM/New-A-13-3-Laptop-LCD-Screen-Display-for-Toshiba-Portege-R705-R830-R835-/321162565111?PT=UK_Computing_Laptop_Screens_LCD_Pa & hash = item4ac6c7d5f7
  It will be a match?

  Thank you!

  Parts for Portege R830 should be compatible with the R835 too.
  Usually, it's the same series but released in another region.

  The screen seems to be compatible with the Portege R705 and R830, R835 series.
  This is why it should be compatible with your model too.

• Use 2 external screens on Satellite L670

  Is it possible to implement a L670 with 3 screens (laptop + 2 external monitors)?
  If so, how this is done?

  I am visually impaired and I currently have 2 monitors connected.
  A 3 ^ rd ^ monitor would be very useful.

  Hello

  As far as I know that the Satellite L670 supports RGB (VGA) and a HDMI PORT.
  But as far as I know, you cannot use these ports at the same time (simultaneously)

  However, I know that some Toshiba laptops support this: like the Qosmio X 500.
  In this case, you need to connect monitors to the VGA and HDMI port and have to press FN + F5 and choose the option: "HDMI + Office extended from a CRT.". But in this case, the internal display will turn off. For example, you can use only 2 screens (external).

  But if you want to use 3 monitors, then I recommend to use an external device/solution as Dynadock.
  Dynadock U3 seems great device that supports the USB 3.0 standard. Google for it.

• Portege M800-A312 can't play using the full screen

  I just bought the A312 M800 and found that I can not play games using the full screen. I already tried pressing Alt + Enter during the game, put "full screen" in the option game, change the display resolution same as game (800 x 600) resolution, set the Compatibility tab, etc.. But everything went wrong. All my games to the point in the middle of the screen with black background. Did someone knows how to fix this problem so I can play my games using the full screen?

  Have you tried a BIOS update and the latest graphics drivers?

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Rotate the screen. Note pad fell on the keyboard, the screen rotated 90 degrees. How do I turn it back?

  What keys use to rotate screen?

  Try the arrow keys all holding the key Ctrl + Alt. Bruce Hagen ~ MS - MVP [Mail]
  Imperial Beach, CA

• Liquid Z 3 How to use the small screen-receving-phone-call?

  Hello

  I would like to know how to use the small screen that appear in a case to receive a phone call.

  There are two types of screen wen we receive a phone call. I know how to use a larger. But not for the little ones. Aid for the small indicates that we have to drag the green phone symbol that I guess, but to fall on what? The manual doesn't explain it at all, it is not obvious!

  Thank you very much for your help!

  With "appellant float" activated, simply to press the Red or green button, no need to call, if the "small screen" is that of the attachment

• Error message indicating the r300 display driver stopped responding when using the full screen.

  Original title: driver atikmdag error message when using the full screen.

  Error message indicating the display driver r300 unresponsive, but has recovered, usually when enter full screen mode.

  Hi Peterrichardson,

  1. when exactly you get this message?

  2. what player do you use?

  3. you remember to make changes to the computer before this problem?

  Method 1:

  You can try to reduce the hardware acceleration and check.

  a. click the Start button, Control Panel.

  b. now, select appearance and personalization, and under display, select adjust screen resolution.

  c. now, select adjust the resolution.

  d. click Advanced settings.

  e. now, click the Troubleshooting tab, and select the change settings button.

  f. in the Security dialog box, click on continue.

  g. move the hardware acceleration slider to the third notch.

  h. click OK and restart Windows.

   

  Method 2: Update your display driver

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• part of the screen lack sound as if all type of himself downplayed a little and does not use the entire screen

  I have a dell studio with vista, I shot it today and the far right 1/4 of my screen has disappeared, its like everything kind of himself downplayed a little and does not use the entire screen. I didn't change anything or add programs. someone has an idea?

  Hi musicwatkins

  
  Did you the latest changes on the computer?

  You can check if changing the resolution of the screen helps you solve the problem. See below for links-

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor

   

  You can also check if the setting parameters of monitor, referring to the manual of the monitor will help you.

   

  I hope this helps.

• Can I have the Microsoft themes that I have for my background, used as a screen saver?

  Is it possible that I can have Microsoft themes that I have for my background, used as a screen saver?  I really like the themes "CatsAnytime" and "CatEverywhere".  I have on my desk, and I'd like to see them as my screen saver too.  Is this possible?  If so, please tell me how.  Thank you.

  Original title: substantive and screensaver

  You can use the screen saver picture to view a slide show of your photos, and you can choose the same images that you use for your wallpaper.  Here's how I would start:

  1. Right-click on your desktop and go to personalize, and then click wallpaper down.
  2. Click on the photos that are highlighted, then select "Properties".
  3. Note the 'place' of images.  For example, mine says all C:\Windows\Web (yours will be different).

     

  4. When you know the location, click Cancel on the two and then go into the screen saver options.
  5. Choose the screen saver photos and set it up to use the folder that you found in step 3 above.

  That's all.  Now this folder of photos will be used for your screen saver.

• use the full screen of 9530

  Hi all

  I'm developing an application for touch screen in which I want to use the entire screen of the device.

  I'm unable to use the whole screen.

  I'm getting a footer on each screen bar

  I had a red mark around the bar. How can I remove/hide it so that I can use this space for my application.

  Thank you

  Hi all

  This is the bug in the beta Simulator with software version...

  I have download the version without beta... and its not to see...

• When I connect AS400 and use SHIFT + f9 screen to do at night.

  * Original title: shift + f9

  Hello

  I bought lenovo with window 8. I use the VPN client with AS 400 and to get the command-line on AS400, I had used on my key position previous computer + F9 which supposed to be F21. But when I connect AS400 and use SHIFT + f9 screen to make night and it does not matter, I use only F9 or shift + F9 screen to night and back but I can't control line. Help, please

  Hello

  Please contact Microsoft Community.

  Since you have a problem with the VPN connection, this question is better suited for Microsoft TechNet Forum so I suggest you to send this request in Microsoft TechNet Support Forum, follow the link below.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w8itpronetworking&filter=AllTypes&sort=lastpostdesc

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.