Using NAT, the host looking for viruses?

Similar Questions

• Messaging Instant Lync can be used with the Hosted Exchange mail server?

  Messaging Instant Lync can be used with the Hosted Exchange mail server? Let me rephrase the question. As everyone knows already Lync messenger is used with Office 365, but can be used with the same way hosted exchange server, it is used with Office 365?

  You will find support for MS Lync in these forums-online http://social.technet.microsoft.com/Forums/en-us/category/ocs

• Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds?

  Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds? Now whenever I update my software I need to change the global variable where I store the version number, and then when I build I have in hand, open the properties and change the version number for the executable file and the installer. Is there an easy way to make these as all corresponding automatically?

  Have you tried a search? This question comes up a LOT. Here are the results of a search: http://forums.ni.com/t5/forums/searchpage/tab/message?location=Node%3A170&q=application+version#mess...

• What's the use of the second available for Captivate perpetual licenses right?

  What's the use of the second available for Captivate perpetual licenses right?

  If you ask if the software can be installed and enabled on both machines, yes it can.

• By specifying the host name for the database during installation

  I installed the database 11g r2 as a Server Desktop, anywhere during the installation it asked me to review or change the host name. It is automatically used as the host name "localhost" and wrote in listener.ora, so no other machine on the network is able to use it. Only, it connects since within the same machine. Please help how to specify the host name during installation.
  
  Published by: user4928701 on July 8, 2011 23:15

  user4928701 wrote:
  I installed the database 11g r2 as a Server Desktop, anywhere during the installation it asked me to review or change the host name. It is automatically used as the host name "localhost" and wrote in listener.ora, so no other machine on the network is able to use it. Only, it connects since within the same machine. Please help how to specify the host name during installation.

  Published by: user4928701 on July 8, 2011 23:15

  lsnrctl stop

  move/rename listener.ora to new/other file name

  lsnrctl start

• Guest OS using NAT and host wireless can ping Google but can't surf the net

  Hi all.

  I just installed 'Vmware Workstation ACE Edition' Version: 6.0.0 build-45731

  I then installed a new virtual machine Windows XP SP2 home edition.

  My host is a business of W7, browse the internet using a wireless network card. (I currently don't have a way to have the physical NIC connected to it).

  My conf wireless host is:

  LAN wireless adapter wireless network connection:

  The connection-specific DNS suffix. :

  ... Description: Connection network Intel (r) PRO / Wireless 3945ABG

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv4 address: 192.168.1.33 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Thursday, December 2, 2010 10:50

  Lease expires...: Sunday, December 5, 2010 10:49:59

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DNS servers...: 192.168.1.1.

  NetBIOS over TCP/IP...: enabled

  The goal is simple: be able to surf the web with my guest OS (Windows XP Home edition).

  I first tried to bridge with VMnet0 = > KO (no ping, no navigation)

  I then tried NAT which is by default bound to VMnet08 = > always KO but:

  -I can ping google.com:

  Ping google.com http://173.194.36.104 with 32 bytes of data:

  Reply from 173.194.36.104: bytes = 32 time = 765ms TTL = 128

  -I can not always surfing the net

  When you activate NAT on the guest operating system the ipconfig gives the following:

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : localdomain

  ... The IP address: 192.168.31.128

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. : 192.168.31.2.

  I do not have an anti virus installed on the client

  I tried to disable windows firewall with no luck

  I tried telnet google.com port 80 = > KO

  C:\ > telnet google.com 80

  Login to google.com... Could not open connection to the host, on port 80: Co

  nnect failed

  Any help, tracks, ideas, would be greatly appreciated.

  Thanks in advance

  Michael

  Just an info, Windows 7 is not a host VMware Ace/Workstation 6 operating system.  Also why do you install 6.0.0 vs install 6.0.5?

  Have you tried to manually set DNS servers to no known public IP address just leave it to the private IP address that you have shown by default?

  Give a try:

  OpenDNS

  208.67.222.222

  208.67.220.220

  Or

  Google Public DNS

  8.8.8.8

  8.8.4.4

• the cutting of the domain component of the host name for the use of script

  Hello

  I'm trying to rename my < host name > local-local data warehouses.

  Pretty easy in theory as much as it is the only store of data on my host right now.

  I do this

  $vmhosts = get-vmhost-location < data center of choice >

  for each $vmhost in {$vmhosts}

  Get-vmhost $vmhost | get the data store | store game data-name '$vmhost - local.

  }

  Only they named

  myhost.mydomain.com - local instead of

  myhost-local

  I am fairly new to scripting and I do not know how to cut the $vmhost down to remove the. mydomain.com beyond the end.

  I noticed in powershell they mention that you can use .string to shorten the chains just doesn't seem to work.

  Any help would be great.

  Thank you

  You can use the Split method to do this.

  Something like that

  $shortName = $vmhost. Name.Split('.') [0]

  That what is to separate the host name in all places where there is a point.

  The result is returned as an array of strings, and we want the first string

• failure of the system, looking for answers

  Need help for the guys. Had a major failure of the system last week, and I'm a bit confused as to what happened and why I was unable to get free. I lost a bit of my confidence in Vsphere, and I'd like to renew that.

  A bit on the environment, esxi 5.0 U1, with servers HP Gen 8 3 node cluster running. HP P4500 SAN iscsi for vmfs data storage. ESXi is installed on HP's CF cards in servers. This cluster has been upward and running for about 6 months, not a single hiccup before that.

  Wednesday we have migrated 2 of our vm (SQL and progress) to this cluster 5.0 database, the virtual machine went on different hosts in the cluster. The virtual machine was running on a cluster 2 older nodes with esxi 4.1 U2. Machines migrated fine, fine tools updates, reboot, everything seemed fine.

  About 2 hours after that the migration, we started to receive calls that our Progress database is down, users could not connect. Then we started getting more calls, other machines were inaccessible. Glancing from vcenter I could see all the virtual machines in question were on the same host, and I was unable to open the console in vsphere for VMs on that host. The host showed he was connected, showed all the vm connected, but I could not open the console or the desktop remotely to one of the VMs on that host. I started studying, and of course this host fell all the SAN Iscsi network connections. The railways have shown dead. Ports of nic card viewed active, the switch ports showed activity, but the connections were down. I could always ping the address of management for the host however, and ports for vmotion were in place.

  At this point, I started to try and vmotion VMs on that host data base progress, he would not migrate, just sat at 8% prepare to migrate. I tried other virtual machines with the same result. I started to wonder why HA had not kicked, and why I couldn't move anything. At this stage the host started disconnecting from the cluster. I could always ping on the host, but vsphere showed as disconnected. I couldn't move my VM, and I couldn't go to the host via vcenter, via the vsphere client pointed directly to the host, or by using the DCUI.

  So I called VMware support, got an engineer on the line with me, and it became clear we were going to have to power cycle that host and crash all virtual machine running on it. It wasn't a very pleasant for me answer because this database of progress is our main production system, and I was afraid of corruption. We had no choice, so we did. When the host came back upward, fortunately the virtual machine came very well. VMware engineer digging in the newspapers and said that this was with a particular NIC card driver with known issues. He showed me the KB on this issue, and it seemed to be a known issue. We have updated these drivers on all hosts, and that's all.

  My problem with this is that, how is the cluster ran fine for 6 months without problem, and how come the redundant path to the SAN did not keep the connection active when with the path with the bad nic card driver failed? I have 2 different, with 2 NICs different paths for the Iscsi SAN. The other card had no known driver issue. Why both paths failed not just in cause of a driver on one of the cards problem? More worrying is also how is it that I could not immigrate anything, and why no HA kick in?

  Sorry for the novel here, but without all the details is not part of a story. My biggest concern, that's why I couldn't move anything? In the event of a host failure, what you're supposed to do in order to migrate the machines if they don't migrate via vsphere client? We were down for about 2.5 hours, and a lot of questions were thrown on me the senior management as to why my "system available, redundant high" took hours to retrieve...

  Guys here any ideas, thoughts on how I would have handled it differently, reasons why I should be confident everything is fine now?

  Thanks for your time

  Kevin

  trink408 wrote:

  Thanks Matt.

  I guess some of the problem is not completely understand how the HA or Vmotion. I was under the impression once that the virtual machine was not reachable HA wouldn't kick and move the virtual machine? The virtual machine was not to ping requests or accessible by the Office remotely. I couldn't get their power off or do anything through vcenter either.

  If they had no link usable storage, this seems possible.  HA simply does not address the failures of storage.  Not at all.  It IS possible to activate at the level of the VM HA, but it isn't on by default - must be activated on a per-VM basis.  You should read the book by Duncan Epping on this - it's the bible of the AH.

  So in case something happens with the connection of storage, you have really no way to vmotion anything right here, and your only option is to kill the host / VM running on it, and then migrate or leave HA move them?

  Fix.

  I didn't know that I wouldn't be able to vmotion virtual machine if the host has lost its connection to storage. The other hosts in the cluster saw storage.

  The source host is controlling these VMDK, as far as the other guests are concerned (they see a lock on the file) and when they ask the host if its still alive, he answers (because it has not powered the network lost or down, which are the failure mode THAT HA is designed to handle). So they take charge.

  The reason why it took so long was because I didn't kill the host with my concerns for the database. I was hoping that the VMware engineer may have a way to gracefully close things down. So he spent some time looking around and trying to determine what was going on. Ultimately we just power cycle the host, so I could have done much earlier, and if we are facing this again in the future, I would.

  As long as you follow the seller advised for more decent databases (keeping the transaction logs, etc.), don't have good backups, theres no real risk of data corruption.  VMware does not significantly change the i/o path, in order to have the same exposure than on a physical host.

  I still do not understand why the two paths were marked as dead and the host completely lost connection to the SAN, as well as to show finally disconnected in vcenter.

  Well the host went offline because it got stuck in an all-paths-down scenario, which is common for 5.0.  5.1 solves this problem a little.  I don't know why all roads fell, but I suspect that you have a misconfig somewhere... normally you expect at least 4 paths in a system set up correctly on the left.  Check with HP to ensure that you follow best practices.

  Maybe all the IP stack has been corrupted or something?

  Possible, of course, but unlikely.  Never heard before.

  I appreciate the help and the preview, I thought that the problem was a lack of understanding on my part and fully accept it.

  HA and vMotion are complex.  At least now you can go back to mgmt and tell them why he fell more (because it was a failure outside the scope of the software scenario) and may ask for money to build a proper SQL cluster.  Definitely recommend the book of Duncan Epping: http://www.amazon.com/VMware-vSphere-Clustering-Technical-Deepdive/dp/1463658133/ref=la_B002YJMRCY_1_2?ie=UTF8&qid=1363622697&sr=1-2

• Comparing the use of the data store for the use of the disk on the server virtual computer: Match is not

  I'm a bit confused and could use clarification of a person.

  I'm looking to a virtual machine through the vSphere Client and it has an alert telling me that my free space data store is low. 17.55 free GB of 134,75 GB total capacity. I'm running ESX 4.0 for the host and my VM running Server 2008.

  I'm confused because when I connect to the virtual computer and check the use of disk in my computer, it does not reflect what vSphere tells me. This particlular VM is little used and the use of the disk under windows is very very low. About 20 GB.

  Can someone tell me why these numbers are not matching? I have other virtual machines that are in the same situation.

  Thank you

  Blake

  I think that you may be mixing two things up, the vSphere client will only warn about the data store, the VMFS volume, you have created and presented to ESX. You then create a VMDK file for your Virtual Machine to use. If you assign more than 80% of your data store to a VMDK or several VMDK then the customer will report a warning on its use. WARNING 80% 90% critical even if inside each VMDK file you may be using only a couple of GB.

  If you give a little more detail on the virtual machine and the data store, we should be able to get out.

  Hope this helps,

  Dan

• I want to know the details of the transfer of website (live) in the establishment of the host site for cloud.

  Dear creative cloud support,

  Right now, I'm one of your customers already using product from Adobe web premium from CS3, this time I use your CS5 web premium.

  And intends to subscribe to Adobe Cloud.

  I am interested to know more details about your installation site in Adoce Cloud host Site host (5).

  In connection with its characteristics and maximum capacity 20 GB as a member.

  My questions:

  1. this facility for the new domain name or can be used for existing website (live)?

  2. don't transfer us any Web site content in this Site host? Or just a link?

  3. If it is a similar principle of ease only web hosting, what database engine and language it supports?

  Maybe my questions are not related at all with your host Site terminology, if so please explain in more detail on this or me directly to read your article about how step by step, we can use this service.

  Thank you very much for your attention and I look forward to hear from you at my email: [email protected]

  Sincerely,

  Budhi Suwardi.

  Hi Lydia,.

  1. this facility for the new domain name or can be used for existing website (live)?

  If you already have a domain, you can associate it with 1 of the 5 sites included in the services included with Creative cloud web hosting BC

  2. don't transfer us any Web site content in this Site host? Or just a link?

  You can create and publish an entire site, this is typically done with Dreamweaver or Muse.

  3. If it is a similar principle of ease only web hosting, what database engine and language it supports?

  Service which does the hosting Business Catalyst and the service provided is webBasics. This FAQ contains information about the service.

  http://www.Adobe.com/products/business-catalyst/FAQ.html

  These videos can also be useful:

  http://TV.Adobe.com/watch/learn-creative-cloud/publishing-and-managing-a-website-with-Crea tive-cloud /? go = 13698

  Dreamweaver

  lyst-and-Dreamweaver-cs6-what-is-business-catalyst http://TV.adobe.com/watch/Introducing-Business-Catalyst/Getting-Started-with-Business-CATA

  lyst-and-Dreamweaver-cs6-creating-and-publishing-sites/ http://TV.adobe.com/watch/Introducing-Business-Catalyst/Getting-Started-with-Business-CATA

  Muse

  lyst-and-Muse-what-is-business-catalyst http://TV.adobe.com/watch/Introducing-Business-Catalyst/Getting-Started-with-Business-CATA

  lyst-and-Muse-creating-and-publishing-sites http://TV.adobe.com/watch/Introducing-Business-Catalyst/Getting-Started-with-Business-CATA

  We also have a forum specifically for Business Catalyst here:

  http://forums.Adobe.com/community/business_catalyst

  They should be able to answer any additional questions you may have.

• How do I change computer to use only the black cartridge for print on PSC 950 h

  I'm having a problem with my hp psc 950 printer - when I try to copy something it gives me an error to support code on enter to align cartridges-i do this and it is not always copy - how can I change the printer to use only black ink, the color cartridge is probably more good, I just changed black ink and I really don't need the color in my copies - all solutions would be greatly appreciated

  Thank you

  Hi yalulu,

  I understand that you do not use the black cartridge only. I find the features page and the manual for the PSC 950 but did not find that I was looking for. I would suggest trying to use the printer in mode single cartridge, but I am not sure if the printer supports this feature, that's what I was looking for.

  Try out both cartridges, then put in black only. If this does not work, the only other suggestion I have is to replace the color cartridge.

  You can use the below document to troubleshoot color cartridge, select the document that best describes the issue, or take a look at the same time. You can find these useful.

  • Mistakes print cartridge
  • HP 15, 17, 23, 41, 45 and 78, printing unit is not detecting Due cartridge to white, waxy Substance on cartridge Contacts

  I hope this helps to solve the problem you are experiencing.

• Whenever I boot, I get the messages looking for missing drivers - how can I get rid of them?

  Clean boot manager programs.  Now get the following messages-

  (1) c:\window\system32\mvmctray.dll lack of entry nvtaskbarinit
  (2) c:\window\system32\nrcpl.dll entry - nvstartup
  Already tried to clean using the registry Manager.

  Reinstall the drivers

  Those who seem to be Nvidia drivers.  If you have a card Nvidia GFX download and install the latest driver for your motherboard

• How can I activate the "Host key" for my sftp to the ISE Server?

  Hello

  I can't copy my files to upgrade 1.2 ISE to my repositories the.

  Here is a cut and paste of my CLI on one of my knots ISE after attemtping to copy from my workstation (running a SFTP server) to one of my nodes of ISE.

  XXX-ise-01 / admin # s copyftp: / //ise-upgradebundle-1.1.x-a-disque 1.2.0.899.i386.tar.gz.:.

  User name: Admin

  Password:

  % ERROR: backup failed due to one of the following reasons

  1 host option key is not configured

  2. the host key is removed due to the new image

  3 host key is removed from any other depositary having same ip/hostname

  % Please reconfigure the host key option

  % Error: transfer not possible

  I don't have whatever it is configured with the option "host key.

  I googled and searched, but cannot find references limited to the "Host key" command within Cisco. I tried various forms of it on the ISE node with no luck.

  I tried an FTP transfer, but it does not work.

  Any ideas?

  You can try to add a repository to your local configuration as an sftp server that should start the process host key.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Set the host name for a virtual machine

  While the vApps instantiation using a model about the same way as the sample of HellovCloud.java, I need to be able to change the host name (called the name of the computer in vCD) of the only virtual machine contained in the VAPP. I can't find examples on how to do it. Any ideas?

  Hope that this helps, I took it out some code that we use (SDK). NET - this is not an exact copy of the labour code, but must be what it takes to get there.

  String modifierText = "1234";

  With complete API v1.5 may need to change this kind of object to Vm

  VAPP vm = GETTHECHILDFROMTHEAPP (VAPP. GetChildrenVms());

  If (vm. GetGuestCustomizationSection()! = null)
  {
  GuestCustomizationSectionType guestSection is vm. GetGuestCustomizationSection();
  int len = guestSection.ComputerName.Length;
  If (len > 10) len = 10;
  guestSection.ComputerName = guestSection.ComputerName.Substring (0, len) + modifierText;
  Try
  {
  VM. UpdateSection (guestSection);
  }
  catch (VCloudException ex)
  {
  Exception thrown by 1.5 hosts: VCloudException
  (The parameter is not supported in the current context: AdminPassword)
  bug workaround
  If (Message.Contains ("AdminPassword") e.g.)
  {
  AdminPassword value NULL and try again
  guestSection.AdminPassword = null;
  VM. UpdateSection (guestSection);
  } else {}
  throw;
  }
  }
  }

• Enter the location of the image LOOK for iOS

  I have two images of launch for a game that I do with air for iOS, called Default.png and [email protected]. I can't find where to put them so that they are used when the opening play. Documentation from Adobe says they should be in the root directory, so I put them in the same folder as the appeared .ipa file, but that doesn't seem to work (I use a 4th gen iPod Touch for testing, so it doesn't take long to load the game, but I thought that I would see at least a glimpse of it). I also put the launch of the images in the folder AppIconsForPublish that Flash created when I imported the images I use for app icons, but still no luck. How can I get the launch images displayed?

  Icons are handled in a special way, when you publish the icons are brought to you, but they must be beside where the swf's going to be. I have mine in a folder of icons next to the swf.

  The splash screen is not treated in this way, you must add them manually in the publication settings. I think they could be located anywhere on your hard drive, but you must add them in individually, not inside a folder. Then that puts them at the root of the application itself.