HP G60 4440us: computer laptop HP G60 will not start in safe mode

Similar Questions

• HP dv6-6b51nr, will not start in safe mode. pls help

  Thanks for any help.

  I am trying to start my laptop in safe mode by pressing f8 at startup. but I got only a black screen then the laptop starts beeping, which will not stop until I force shut down the laptop.

  Seems something wrong. Help, please.

  Thank you.

  If you are still able to start a normal Windows there is a work around.

  In Windows, search programs and files box, type "msconfig".

  Select the Startup tab and choose start as in the image below. Now, restart the laptop and you should start in Windows safe mode.

  

  Don't forget to go back into msconfig later you will start up in the normal Windows installation again. If you forget to do this, it will always start in safe mode.

  You do not specify what operating system is installed in your laptop. The procedure is valid for Windows XP, Vista and Windows 7.

• Mac mini will not start in safe mode

  Restarts, while now the SHIFT key at startup in safe mode, nothing happens, then I get a screen with lines of code, "panic (cpu 0 0xffffff800ebd255a appellant)", "" panic debugger called: < > "." In addition many other code, then it goes into a loop where he tries constantly to restart with the same results.

  I had problem with this for awhile, but have always been able to boot in safe mode and then restart and my system has always started.

  loss and out of business now.

  -Can you post a screenshot of readable of the kernel panic that appears on the screen? Who will provide the necessary information to help you.

  -What model Mac Mini? Some models have hardware problems

  Without that:

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• 15z HP touchscreen laptop: computer laptop brand new will not start

  My brand new laptop just cameo yesterday and it keeps showing "Boot Menu" with 2 options (FreeDOS and Documents HP). If I choose option 1, which is "FreeDOS", it will show other 2 options: 1 - FreeDOS load including driver HIMM XMS-memory and 2 - load FreeDOS without driver). I have chosen these 2, it displays a black screen with "C:\ > ' at the top left and it won't do anything then. What should I do? I ordered it online on the official site of HP.

  Hi @Iamtrucpham ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your issue on your laptop HP 15z touch and issues with Free Dos. This laptop does not include Windows, you need to buy Windows separately. Free distribution of base back requires no fees or royalties, and the creation of custom distributions is permitted.

  You have a few options. I can't tell you that we chose, I only know you what they are. The first option is to buy a copy of Windows from a retailer and install it on your computer.

  If it's now what you wanted, please use the following link to create yourself a file number, then call and it can help speed up the process of appeal:

  Open the link: www.hp.com/contacthp/

  File number and phone number are displayed.

  They will be happy to help you immediately. Thank you.

• computer will only start in safe mode, always samekh in normal mode

  Original title: help

  computer will only start in safe mode, always samekh in normal mode.any ideas?

  Hello

  do this work in Mode safe mode with networking:

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• XP will only start in safe mode after service pk 3 install, mdule Eventvwr say service command failed

  After a clean install of windows xp family, with nothing but Pctools virus installed and disabled, Xp will only start in safe mode, all 3 choices, it does not start in Msconfig service diagnosis either. Eventvwr said service control module has failed. I tried to uncheck that service figure, but he said that the computer will not start if it is disabled. I uninstalled 3 times and reinstalled with the same results. A last one being a service pk 3 that I downloaded and installed in safe mode.

  It has been installed and working before the clean install of windows with pk3. I removed the patration from the hard drive, write 000 to the dick and reformatted before clean install of xp. It will work with service pk 2 is installed.

  I checked the forums and he Goggled and could not find a solution

  any help will be appreciated

  E-mail address is removed from the privacy *.

  Boris

  You must install SP3 before you install your antivirus program. This can be done safely by downloading the file in advance and install while physically disconnected from the Internet. In addition, you should keep IE at the level before installing SP3 IE6.

  Link to the standalone SP3 Installer file:

  http://www.Microsoft.com/download/en/details.aspx?ID=24

• Vista Ultimate black screen with the living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86, but it will not install in safe mode

  have a ultimate black screen vista under contract with living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86 but it will not install in safe mode

  have you tried the manager used tasks related to bugs

  Msconfig

  Explorer.exe

  and have had no joy... Please heeeeeeeeeeeelllpppppp

  Hello

  It is the fix in case there are any information it helps.

  A computer that is running Windows Vista or Windows Server 2008 stops responding at a black
  screen early in the startup process
  http://support.Microsoft.com/kb/977675

  Microsoft - contact patch Support issues.
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  ======================

  Other troubleshooting methods that can help.

  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  References to Vista also apply to Windows 7.

  No registration necessary data and re - install Windows 7 might be the best option, but here are a
  few others.

  You can save your files by putting the drive in another computer or an external hard drive enclosure, then
  saving them. Do this using several methods to redundantly. Of course, a real computer
  Shop or the manufacturer of your system can help to recover the files.

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  is CTRL + ALT + DEL and the processes tab find EXPLORER.exe and END PROCESS on it.
  then on the tab Applications - lower right - new task - the type in EXPLORER.exe. Safe mode is
  accessible by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a window 7 disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  You can create a recovery disc or someone else use same version (to do the system restore
  It only needs to be bootable).

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  Try Repair Options recovery or a Windows 7 boot disk system

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  If nothing works, you can do a repair installation.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Computer laptop Windows XP does not start.

  My laptop does not start. When I first put it on the screen says 'we apologize... ". Windows does not start automatically in... "Then the Windows XP screen as it tries to load there is this small blue screen that appears a second microphone, too fast to read, then goes back to 'we apologize...". "screen just keeps looping. I thought that my hard drive was going badly, so I ordered a new. I have XP SP3. Could someone help me please?

  Hi robestes3,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  Method 1:

  First of all, you can tryLast good known Configuration and check if helps solve the problem.

  Check out the link:

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 2:

  Step 1:

  If the above method does not work, then you can try to start in safe mode and check if the problem occurs.

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you can boot into safe mode without any problem, and then try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/310353

  If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source:

  In addition, after you resolve the problem, see the section on how to restore your computer to a Normal startup mode.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows XP will only start in safe mode after Windows updated 09/02/2011

  We have seven Windows XP SP3 computers.  All are set to download/install automatic updates every day at 03:00.  Today, one of them does not start in normal mode.  When the user arrives at 08:30, screen was black and would not, if power to monitor and PC were in.  The user powered PC turned off/on.  He came normally too far that the screen blue, just before the login box appears, sucked to boot options.  Boot in safe mode and safe mode with networking mode.  Restart in safe mode after shows the same result.  The event log shows a SaveDump:

  Event type: Information
  Event source: Save Dump
  Event category: no
  Event ID: 1001
  Date: 09/02/2011
  Time: 08:30:01
  User: n/a
  Computer: TOTB-02
  Description:
  The computer was restarted after a bugcheck.  The bugcheck was: 0x1000007f (0 x 80042000, 0x00000000, 0x00000008, 0x00000000). A dump was saved in the: C:\WINDOWS\Minidump\Mini020911-01.dmp.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Installed updates: KB2393802, KB2476687, KB2478960, KB2478971, KB2479628, KB2483185, 2485376

  Word and Excel will not run.  The office is OpenLicense.  Says can not verify the license for this application.

  Thank you

  aDaniel

  A suggestion: as stated above, I thought I was wrong this posted in the Windows 7 Forum.  In fact, the link under XP for updates takes you to the Forum Windows 7 > Windows Update.  It seems that it would be less confusing, if questions update go to a forum, out of Windows 7 and Windows Update as a stand-alone speaker.

  Thank you for all your help,

  aDaniel

• "Windows Vista Security Center" close browser windows, precise I have a virus, and now no programs will be opened. Windows does not start in safe mode, and all the system restore points have already disappeared.

  Hello

  I have a Dell laptop under Windows Vista Premium. I got it for about three years, and he is upset enough ok tonight. In the middle of browsing the internet, check my email, etc., all but one of my browser windows close at random, and a message appears "windows vista Security Center" whenever I try to open a new window, blocking of the site and to say that the site is dangerous and my system has been infiltrated by a Trojan horse. Then he starts the scan and says that I must buy the full to get everything to work again. I closed everything, since I already have McAfee antivirus and internet security, but it does not, and neither did any other progams. I tried restarting in safe mode to restore a backup point, but Windows does not open in safe mode, rather stick for half an hour in the middle of loading. When I managed to start windows in normal mode, I found that all my past restore points had been erased.

  This happened to someone else, and it is fixable without wiping everything?

  Thanks in advance,
  Emma

  Hi Emma,

  This could be due to a virus on your computer.  Try to make a virus on your computer scan to check if your computer is infected.

  http://www.Microsoft.com/Security_Essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• XP will only start in safe mode and System Restore does not resolve the problem

  Don't know not if this is related to the same reported people of BSOD problems after recent updates, but from Tuesday my computer does not start in normal mode.  I can get it to boot in safe mode, however I tried to restore to several different restore points and nothing seems to solve the problem.  Any suggestions?

  Hello

  Many people face this problem after the latest version of windows update on the XP machine. I would like to know where are the updates that have been installed on your computer Tuesday. You can view them from the Windows update history by examining it from the Windows update site.

  In case, if the KB977165 has been installed then, take a look at this thread and check if this helps you boot normally to the desktop.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1

  If the update history shows the other updates in the history list, please let us know the xxxxxx KB (number) updates, so that we can try to help you the best.

  We hope to hear from soon.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista will not start in Normal mode or safe.

  When starting, my login is stuck after that I entered my password. The spinning loading circle just keeps going. I tried to start in safe mode and I tried to do the repair but it still does not. Ive heard that incoming by the command prompt works but how? Any help at all is necessary and greatly appreciated. Thank you!

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer laptop Pavilion dv6 will not work

  Hello, I have a computer laptop Pavilion dv6 with product number QE023UA #ABA. It works under windows 7.

  So I was just playing and my laptop turns off suddenly as if he had run out of battery life. But he is in CHARGE. I didn't know what happened, so I just pressed the power button and nothing happened. I pressed it again but longer, still nothing.
  (btw, I use an extension) I thought something was wrong with the plug, but nothing was wrong. I heard a strange noise coming from the ac cable. That is what happened: Advanced... Tip... Tip... Tip... Tip... and so on. I tried to remove the battery and put it back in, but that does not solve anything. None of the lights are on. I don't know what to do more and I am looking for help.

  Sorry if my English is bad.

  The problem is solved, but thank you for responding.

• Network management problem, computer laptop Windows 7 will not find other computers on any network, however all other computers on the network can access Windows 7 laptop.

  Basically, the issue I'm having is that my laptop does not connect to any other computer to access the actions or other files.  Other computers on the network can access my computer laptop shares and files without any problems.  Operating system is Windows 7 Home Premium x 64.

  What I tried:

  restarted
  uninstalling and reinstalling the files and printers, sharing maps and restart after completion
  all disabled firewall
  tried with IPv6 enabled and disabled without change, so it is currently enabled
  tried on a Wi - Fi and the differences are listed below in the section work (work is wireless)
  able to ping other comptuers
  access to other computers is permitted by other computers

  problem extends over several networks, IE I noticed it at home last night and the followed problem my laptop at work this morning.
  The problem is slightly different on the two sites.

  At home:
  I can see the other computers on the network, but I am unable to access it, even if I have permission, but other computers can access to my laptop.

  At work:
  Cannot even find other computers on the network but they can find and access my laptop.

  I have worked on this problem of non stop for several hours and did much more than what is said, but I am unable to remember everything.  I should have been taking notes: P

  Here are the results of the ipconfig/all command (I removed the physical addresses for security reasons):

  Windows IP configuration

  Name of the host...: Radiation-G72
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : hsd1.ga.comcast.net.
  Description...: Realtek PCIe GBE Family Controller
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR928X Wireless Network adapt
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::f4e3:cd1c:6952:eb4d % 11 (Preferred)
  IPv4 address: 192.168.2.7 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Thursday, February 4, 2010 10:50:32
  End of the lease...: Friday, February 5, 2010 08:29:36
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DHCPv6 IOOKING...: 234890707
  DHCPv6 DUID customer...: 00-01-00-01-12-4C-6E-91-00-25-D3-3D-FC-9A
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {1797D168-6FC8-4DDF-8338-4E214119C26D}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:4137:9e74:4ea:2920:b81a:cdc5 (Preferred)
  Address IPv6 local link...: fe80::4ea:2920:b81a:cdc5% 13 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Asked this question in the Windows 7 forum also because the problem was between windows 7 and Vista.

  Hello

  If it has started, you can try a system restore - an update "might" have caused the problem.

  1. try a system restore back to a point before that happened. And immediately thereafter enter
  Control Panel - Windows updates - top left settings and set it to download and informs you instead
  Automatic. Leave it until you are sure that everything is OK and then you can add them one at a time
  to troubleshoot BUT click right on and HIDE all the driver updates. Also stop at day of drivers like below
  and let this value - manually search for drivers when you think you need. (See how and why to)
  stop day of drivers below.)

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  To uninstall an update if you determine that there are problems - Panel - updated Windows - down left-
  Updates installed - uninstall

  I had completely forgotten the system restore!  While looking into the system restore, I found that when I moved into my new House and has cable Internet installed, the cable technology installed a program of comcast on my computer.  This caused me to not be able to connect with other computers.  After rolling back to install it before it works!   Thank you.

• Computer laptop Windows XP does not start? Help

  Hi I have a windows xp laptop I think that their system eis or something like that... Whenever I start the laptop, he's going on the error you get when your dosent laptop shut down correctly. If I click on start normally the bar will spend about a quarter of the way and then just stayed forever and only safe mode also gets a freeze from then. Y at - it something wrong with the laptop or what. How can I get my laptop to work again... someone help me please.

  It is up to tell you to us what brand of system and the model is... not "system ist or something like that."

  When you choose to start safe mode and you can see all the stuff being loaded and the system crashes, which is the last line on the screen to say?

  If you attached an external equipment, especially USB devices, disconnect everything and then you can see if things seem better.

  If you get an error message windows system config, exactly what he says?

  No error paraphrased messages please!

  It was something like this:

  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Which usually indicate some sort of corruption of system files may be a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).  None of this seems familiar?

  If you can boot from a CD, you can create a CD bootable XP (no XP media required) Recovery Console and run chkdsk with correction of errors on the afflicted to start System.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.