Using Pathfinder to add lines to a letter?

Similar Questions

• Can I get lines painted in Illustrator using pathfinder?

  Hello world

  It is a question of a total novice with Illustrator but I was googling like crazy without result, so any help would be appreciated!

  I'm experimenting with creating seamless models, using forms. I know how to crop shapes by using the pathfinder tool.

  I can do this by placing the different shapes on a square. I then glue a square of the same size in front of all objects, select all then and use the crop to scout tool.

  However if I try to use it with painted lines (or lines created with the online tool or the pen tool) it will not work.

  Is there a way to do it, or am I missing something very obvious? Thank you to everyone who takes the time to answer

  You must not cut the objects you put into a shade of reason. Simply put an invisible rectangle in the back. But in case you want to cut, first expand appearance.

• Add lines - which method is the fastest

  

  I work with data in data acquisition and I need to add lines. I came up with two methods of getting that and as I work with pretty big blocks of data I wonder which approach is most effective. Thanks for the help.

  Both are methods of 'SLOW' and quite the same.

  If you need to go a lot faster, initialize a large array and then use the function 'replace the item.

  If you have any problem to speed the first is the simplest method.

• I have micro serious lag in windows 7, if I use a micro usb, line or mic. Help!

  I have a problem of mismatch of mic in windows 7.  The delay is so bad, that it is difficult to complete sentences, where the game.  The offset is to know them if I use a micro usb, line or mic.  Anyone know now to eliminate this problem?

  Hello
   
  It seems that you are using TeamSpeak or Ventrilo aka event. If this is not the case, let us know what application are you using?
   
  There is some good info here if you use wind and all the different parameters in use. go through the following link:
  http://www.Ventrilo.com/Setup.php

  Disclaimer of third party application:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Use of third party software is at your own risk.

• in windows 7 when you right click on how do you get the little line under the letter of the you can click on to make it open Windows 7

  in windows 7 when you right click on how do you get the little line under the letter of the you can click on to make it open Windows 7

  Example when you right click on a program, you can see Open if you click o the file opens, it was in XP, but not in 7

  That's what you want.

  1 - Open "Control Panel" and go to accessibility.

  2 - click make the keyboard easier to use.

  3. the title of 'Make it easier to use keyboard shortcuts' tick the box 'Underline access keys and keyboard shortcuts' and click 'Ok '.

  Oh sure, it could be useful.

• How to add lines to the PresetEffects.xml from a script

  Hi, I would like to add a few lines in the PresetEffects.xml to another text file or an another JavaScript add lines like this how can I do? :

  < name of the group = "$$$ / AE/Preset/AnimalHead14 / = mouth" >

  < name of the cursor = "' $$$ / AE/Preset/AnimalHead14/MouthOffsetX = mouth X shift" default = '0' valid_min = '-30,000"valid_max ="30000"slider_min = slider_max"-500"= '500' precision ="1"DISPLAY_PERCENT ="true"/ >"

  < name of the cursor = "' $$$ / AE/Preset/AnimalHead14/MouthOffsetY = mouth Offset Y" default = "0" valid_min = "-30,000" valid_max = "30000" slider_min = slider_max "-500" = '500' precision = "1" DISPLAY_PERCENT = "true" / > "

  < name of the cursor = "' $$$ / AE/Preset/AnimalHead14/MouthScaleWidth = scale Overture" default = "100" valid_min = "-30,000" valid_max = "30000" slider_min = slider_max '-500' = '500' precision = "1" DISPLAY_PERCENT = "true" / > "

  < name of the cursor = "' $$$ / AE/Preset/AnimalHead14/MouthScaleHeight = scale of mouth height" default = "100" valid_min = "-30,000" valid_max = "30000" slider_min = "-500" slider_max = "500" precision = "1" DISPLAY_PERCENT = "true" / > "

  < / Group >

  < / effect >

  {function onClick.btn

  Add the lines of my text file in the PresetEffects.xml

  I did once, like this:

  var scriptEffect = {};
  scriptEffect.xml =
  
      
          
          
      
      
          
          
          
      
  ;
  scriptEffect.matchName = [email protected]();
  
  function installScriptEffect(){
  
      var ret;
      var file = new File(Folder.appPackage.absoluteURI + "/PresetEffects.xml");
      var str, idx, header, xml;
      var xmlSettings = XML.settings();
  
      XML.setSettings(XML.defaultSettings());
  
      try{
          if (!file.exists) throw "ERR_FILE_NOT_FOUND";
  
          file.open("r");
          str = file.read();
          file.close();
  
          idx = str.indexOf("");
          if (idx<0) throw "???";
  
          header = str.substring(0, idx-1);
          xml = new XML(str.substring(idx, str.length));
  
          if (!xml.contains(scriptEffect.xml)){
              xml.appendChild(scriptEffect.xml);
              if (!file.copy(new File(file.absoluteURI+".bak"))) throw "ERR_CANNOT_WRITE";
              file.open("w");
              if (!file.write(header + xml.toXMLString())) {file.close(); throw "ERR_WRITE_FAILED";};
              file.close();
              alert("Preset installed succesfully. Please restart After Effects");
              }
          else{
              alert("Preset already installed. You need to restart After Effects to make it effective.");
              };
          ret = true;
          }
      catch(e){
          file.close();
          alert(e);
          ret = false;
          };
  
      XML.setSettings(xmlSettings);
  
      return ret;
      };
  

  Then, when you want to add the effect, check with myLayer.effect.canAddProperty (scriptEffect.matchName).

  If true, nothing to do, otherwise use the installScriptEffect function. Normally, it works (haven't tried for a long time).

  Xavier

• ADOBE Acrobat Pro DC - add lines to an existing table

  Hello. I have an existing table, I need to add lines.  Is this possible? Thanks in advance.

  It is very difficult to do something like this in a PDF file (unless it was created using LiveCycle Designer).

  You will be better off by changing the original file, and then creating a new PDF from it.

• I can't re install Adobe Acrobat professional 7.0 on my computer.  That is to say that a qualifying product is not detected. I can't even through the use of the service line customer they provide 800-272-3623.  This is the worst ever had interactionI with

  I can't re install Adobe Acrobat professional 7.0 on my computer.  That is to say that a qualifying product is not detected. I can't even through the use of the service line customer they provide 800-272-3623.  It's the worst interactionI have ever had with a company.

  Hi joej49728017,

  I'm sorry for the inconvenience caused. But it's all just because Adobe Acrobat 7.0 is a stale version & now the activation server so that there is no.

  Please refer to the following KB doc.  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  The link above will help you to install a special version that doesn't require activation.

  In case you still need assistance, please let us know. We will be more than happy to help you.

  Kind regards

  Nicos

• Add lines above and below the text

  How can I add lines above and below the text in indesign.

  I inherited this file and want to change.

  indesign to cs6 file example

  http://www.cathylbrown.com/PDF/ TEst - Lines.indd

  http://help.Adobe.com/en_US/InCopy/CS/using/WSa285fff53dea4f8617383751001ea8cb3f-6dd2a.htm l #WSa285fff53dea4f8617383751001ea8cb3f-6dc1a

  Sorry, making reference to InCopy.

  I meant http://help.adobe.com/en_US/indesign/cs/using/WSa285fff53dea4f8617383751001ea8cb3f-6dd2a.h tml #WSa285fff53dea4f8617383751001ea8cb3f-6dc1a

• Need to add lines to a dynamic form based on numeric field

  I designed a form based on the example in the book of the use of javascript with addInstance Terry to make a button to add a line in a table.

  Works very well for me, however I am transforming the shape slightly so that instead of allowing the user to click the button Add a line I have them enter a numeric value in a field, then call addInstance to create the correct number of lines. The numeric field is on page 1 of the form and is called NumberStudents and is linked as a Global.  I tried to have him call addInstance to add lines, but can't make it work.  Suggestions appreciated. Thanks newbie.

  The only mistake you made was missing rawValue next to the name of the command "NumberOfCards".

  var i = 0;

  for

  (I have = 2; I<>NumberOfCards.rawValue. i ++) {

  Roster.Page2.StudentSubform.Table1._Row1.addInstance (1);

  XFA. Form.Recalculate (1);

  }

  If your requirement is to add the number of rows based on the value entered in the digital field, so you can by calling the setInstances method. This way you need not looping through the number and use of the addInstance every time.

  Roster.Page2.StudentSubform.Table1.Row1.instanceManager.setInstances (5);

  XFA. Form.Recalculate (1);

  or

  Roster.Page2.StudentSubform.Table1._Row1.setInstances (5);

  XFA. Form.Recalculate (1);

  Thank you

  Srini

• ORA-01403: no given available problem when you use FETCH of AUTOMATIC LINE to fill

  ORA-01403: no given available problem when you use FETCH of AUTOMATIC LINE to fill out a form.
  
  1) has created a FORM on the use of assistants of EMP. This creates an AUTOMATIC FETCH of LINE
  NAME OF THE TABLE - EMP
  The PRIMARY KEY containing - P2099_EMPNO point
  Primary key column - EMPNO
  
  By default, automatic extraction has a "process Error Message' of"Unable to fetch line."
  
  (2) created an HTML region. In this region add
  text P2099_FIND_EMPNO element
  GET_EMP submit button
  The update branch the conditional branch created when the Create button to set P2099_EMPNO with & P2099_FIND_EMPNO.
  
  If I then turn the page, enter an employee in P2099_EMPNO number and press the GET_EMP button, the form is filled correctly. But if I get an employee who does not exist, then I get error oracle ORA-01403: no data found and no form but a message at the top of the page 'Action transformed '. I was expecting a blank form is displayed with the message 'Could not extract line.'
  
  In conditioning automated extraction so that it checks that the line exists first, I can work around that. Change the fetch EMP automated line so that it is conditional
  EXIST (SQL query returns at least one row)
  
  Select 'x '.
  from EMP
  where EMPNO =: P2099_EMPNO
  
  
  But this means that when the employee exists I must be get DB twice, once to the State, and then again for the extraction of the actual line.
  
  I can't change so I don't get the Oracle error, rather than work around for a above is there something? I wonder now if the automatic extraction of line is only supposed to be used when you bind a report to a form and that I should manually write the extraction process. The reason for which I don't have at the moment, it is that I'm trying to stick with the auto generation Assistant as I can.
  
  Any ideas?
  
  Thanks, Pete

  Pete:

  The process Assistant APEX (ARF, ARP etc) errors are generally not recoverable. The error encountered is simply displayed on a page by using the model of "Error Message. So as you said yourself, you create your own process line Fetch and have the opportunity to customize the management mistakes, or you paste a validation on the page to verify that a folder can be accessed for the views expressed.

  CITY

• Tabular add line question

  Hi guys,.
  
  I have a tabular presentation that I created using the wizard. The fields on the of are URL_ID, URL, URL_Name Report_ID
  
  The URL_ID is filled by a trigger on the table. The name of the URL and the URL field are met by typing in a textbox.
  
  Is it when even spend Report_ ID value of an item hidden in the Add line function so that it inserts into the table. For the moment it insert a null value.
  
  I'm under Apex 2.0 by the way.
  
  Thanks in advance,
  
  Huw.

  Your REPORT_ID (whatever it is) column has a property with a default value which could be an element value (P1_REGION_ID) or a PL/SQL Expression NVL(:P1_REGION_ID, '00000'). In addition,

  Owner of the Table reference
  Reference Table name
  Name of reference column

  must be defined correctly.

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  You probably have some of the older than the needs/desires software legacy Java installed.

  Please see these sons of community message:

  After the installation of El Capitan, I get the message: to use the 'java' command line tool, you must install a JDK

  Just found this last Java does not work with El Capitan

  This is the Apple link to the legacy version of Java 6.

  Download Java for OS X 2015-001

  First of all, I would like to try to identify what application generated the next message and update (delete) this request as the case may be. If you need to run Java then, as the Apple Support page says it's certainly preferable that your installation of Java entirely up-to-date with the Oracle's Java course. If you can get without Java, you should install it not - like the Flash, it should not be installed unless you have no choice.

• Can satellite L300 - I use the microphone as line-in port?

  On Toshiba Satellite L300 PSLBGE, there are too many plugs: microphone and headphones.

  I would like to copy and transform in digital music from my old analog tapes thorugh an audio cable and a former recorder. Before, I use a desktop PC, which was a line-in Jack (I use Sound Recorder). But the laptop has only two Sockets mentioned. Can I use taken mic as line - in one? At the present time, I installed Windows XP.

  Thanks for any suggestions.

  Hello

  Did you check your user manual? I doubt that this is because there, I created the following information:
  Standard 3.5 mm mini jack microphone allows the connection of a microphone or any other device for * audio *.

  This means that you can also connect other devices to input for audio recording. ;)

• How do I add lines to multicolumn listbox control

  Hi all

  the questions are as below:

  1. how to add lines to multicolumn listbox control?

  2. the message is the message of RS232 communication with hexadecimal, how to convert 2D format to fit the Ref property?

  anyboady can provides a simple example? Thank you very much.