Using sync as a transfer service?

Similar Questions

• Is it possible to recover data using the Eloqua API web service for submission of form?

  I want to recover the data of contact of a form. I couldn't find examples on the webhelp API, and therefore, do not know if this is possible.

  Hello Shashank!

  Yes you can certainly do with the API.  You must save the data report to send a form as a saved report. You can then use Eloqua DTS (data transfer service) wsdl to generrate a url that is a link to the report.  Your system can then consume the URL and get the data in the report.

  The applicable methods are

  Overview of the operations data Export

  InitializeDataExport

  DataExportStatus

  GetDataExportURL

  I hope that helps!

  If you want more etailed information please submit a ticket to support, and we will be happy to help you.

  Best regards

  Dave Seaton

• For 2 weeks, I could not use sync & it is said that the server maintenance is underway will automatically resume; need to transfer the story of a new laptop

  For about 2 weeks, I've been unable to use sync. I get a message that says the server maintenance is underway and will automatically resume. How long will the interview last? I have urgent need to transfer my story to a new laptop and the one I'm currently back. My deadline is tomorrow that I have run out of time to complete this process

  In case you can not Sync works for you before you need to activate in this old laptop, you must backup your Firefox data to a USB key or other support.

  https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles

  When it comes to your bookmarks on this old laptop, you must export your bookmarks to an HTML file so that you have a file that can be imported and merged with the all new bookmarks that you may be saved on the new laptop.
  
  https://support.Mozilla.org/en-us/KB/export-Firefox-bookmarks-to-backup-or-transfer

• Cannot use Sync to transfer them to my new laptop

  I'm trying to transfer my Firefox on my new laptop computer info. By attempting to use Sync to try to accomplish, I ran into the following sequence of problems:

  1. I went to set up sync in the drop of Firefox and received a set of three, four characters codes to enter in my laptop Firefox.
  2. I went to the Options in my laptop computer and clicked on Sync there.
  3. I clicked on the pair a device, entered my office codes and clicked OK.
  4. on the account details screen, I have entered my email address (I got no problem for more than 10 years) and was informed that the address was already in use. I assumed that this meant that I didn't actually have a sync account established.
  5. I went back to the previous screen, this time by clicking on I have an account, and then click OK.
  6. on the login screen I entered my account email address (since I'm not aware of any other account name or number to use) and that of the passwords that I sometimes used with this address.
  7. any password I entered (of those that I can remember), the next button remains greyed out, since there is no recovery key to enter.
  8. I have returned to my desktop and went to Sync under Options. However, despite what is said in the window of the connection on the laptop, there is no button or link to manage my account or my recovery key that appears in the window on my desktop. All I get is the same create a new account or I have an account options.
  9. I am not aware of ever created an account of synchronization, and even fewer have received and registered a recovery key. However, to verify that I don't actually have an account, I used Firefox to change my password, that allowed me to do so without incident. I take this as a confirmation that I don't actually have a sync account. In any case, I can't create a new account on my existing email address or access to any account that I have because I don't have a recovery key. And I have no way to identify the recovery key.

  So I'm at a loss on how to proceed from here. I usually found things setting in Firefox would we apply and simple. But it's becoming one of the most frustrating experiences I've had with computers. I tried to do this job more than a dozen times today, using different stages or levels of steps (e.g. from the laptop rather that the office, from the Options rather than configuring the synchronization menu drop-down).

  Can anyone help to understand what goes wrong, so I can get this set up?

  Have you ever set up sync on this computer?

  If you want to reset the sync data and download data synchronization server, you need to reset the key to sync or delete the account and start from scratch.

  • https://support.Mozilla.org/KB/Ive-lost-my-Firefox-sync-account-information

• BlackBerry Smartphones Will new office software Mac using sync services

  I'm really looking forward to the Mac dedicated rim desktop software. I guess it will probably be using sync services Apple System. If someone knows about it. The reason why I ask, it is that there are many problems with sync services (not reliable etc.). PocketMac tell, when it sync with Entourage I think around sync services goes directly to the Entourage. Missing Sync for BlackBerry uses sync services where syncs Entourage to synchronize services and it does not really (quite messy).

  Someone has any idea how to work the new office.

  Here's a little info coming out today

  http://www.BerryReview.com/2009/08/05/BlackBerry-Desktop-Manager-for-Mac-more-details/

  I'm sure that we will find more as it gets closer to release.

• Update for Background Intelligent Transfer Service (BITS) 2.0 and WinHTTP 5.1 (KB842773)

  Update for Background Intelligent Transfer Service (BITS) 2.0 and WinHTTP 5.1 (KB842773) did a new install of windows... trying to update and it always fails to download... even small jets of microsofts help page and downloaded it... says file is corrupt... tired of this fight to get the puter back up to date

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that give repair install (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Background Intelligence Transfer Service does not appear in the services

  (BITS) Background Intelligent Transfer Service is not in the services on my XP Pro OS. My computer has stopped automatic update of windows, etc. It seems that the BITS disappeared. I'm at my wits end as the restoration of this service. I tried the system restore and no luck. Please can you recommend a way to restore this service without causing any serious problem for the software of the laptop?
  Thank you

  Open Notepad, copy and paste the following text in Notepad (the Windows Registry Editor is the first line, no space before it) save the notebook under the name of all the files and name it BITS.reg after u save it, double-click your file u saved BITS.reg & it will add the following data to the registry that will restore the BITS service:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS]
  'Type' = dword:00000020
  "Start" =: 00000002
  "ErrorControl" = DWORD: 00000001
  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,76,00,63,00,68,00, 6f, 00, 73, 00, 74, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 20, 00, 2d, 00,------.
  6 b, 20, 00, 00, 6F, 00, 65, 00, 74, 00, 73, 00, 76, 00, 63, 00, 73, 00, 00, 00
  "DisplayName"="Background Intelligent Transfer Service".
  "DependOnService" = hex (7): 52, 00, 70, 00, 63, 00, 73, 00, 73, 00, 00, 00, 00, 00
  "DependOnGroup" = hex (7): 00, 00
  "LocalSystem ObjectName"=""
  "Description"="background transfers files using the bandwidth network inactive." If the service is stopped, features such as Windows Update or MSN Explorer will be unable to automatically download programs and other information. If this service is disabled, any services that explicitly depend on can fail transfer files if they do not have a mechanism of fail safe to transfer files directly through IE in case BITS has been disabled. »
  "FailureActions" = hex: 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 68, e3, 0c,------.
  00,01,00,00,00,60, EA, 00, 00, 01, 00, 00, 00, 60, ea, 00, 00, 01, 00, 00, 00, 60, ea, 00, 00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS\Parameters]
  "ServiceDll" is hex (2): 43, 00, 3 a, 00 5 c 00, 57, 00, 49, 00, 4F, 44, 00, 00, 4f, 00, 00, 57, 53,------.
  00, 5 C, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 71, 00, 00, 6 D, 00,------.
  67,00,72,00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS\Security]
  "Security" = hex: 01, 00, 14, 80, 90, 00, 00, 00, 9 c, 00, 00, 00, 14, 00, 00, 00, 30, 00, 00, 00, 02,------.
  00, 1 c, 00, 01, 00, 00, 00, 02, 80, 14, 00, ff, 01, 0f, 00, 01, 01, 00, 00, 00, 00, 00, 01, 00, 00,------.
  00,00,02,00,60,00,04,00,00,00,00,00,14,00, fd, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00,------.
  05,12,00,00,00,00,00,18,00, ff, 01, 0f, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00,------.
  20,02,00,00,00,00,14,00, 8 d, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00, 05, 0, 00, 00, 00, 00,------.
  00,18,00, fd, 01, 02, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00, 23, 02, 00, 00, 01, 01,
  00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS\Enum]
  "0" = "Root\\LEGACY_BITS\\0000."
  "Count" = DWORD: 00000001
  "NextInstance" = DWORD: 00000001

• Background Intelligent Transfer Service is missing in XP

  Hello

  I had problems to install updates from Microsoft Updates and looking at the error messages it tells me that I need to check the properties of the Background Intelligent Transfer Service, but when I search this file is missing.

  How to replace this file missing and how I see that other registry files are missing?

  Thank you

  Katie

  I have XP Home Edition I've just updated to SP3.  Windows Update stopped working.  There are 27 files for me, but all fail to install.  There is no sign of BITS when I run services.msc, in Standard or extended tabs.

  This method did not work for me, things go off track right from the start because when I run %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf he asks me the original disc of XP SP3.  But my drive is only SP1.

  When I put it in and the program heading it, copy the two files even if the target files are overwritten are newer than those on the disc, but then says he can't copy a file with a name like bitsprix.

  This problem has held a ridiculous amount of time.  Can someone please help?

  Hi Marbrien,

  Follow these steps.

  Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll

  Research should show this file in the following locations:

  C:\Windows\System32
  C:\WINDOWS\ServicePackFiles\i386
  C:\WINDOWS\system32\bits

  You can only see qmgr.dll in C:\WINDOWS\system32.

  Click on start, run and copy/paste: regsvr32 qmgr.dll and click OK

  Do the same with this file: regsvr32 qmgrprxy.dll

  Reboot the system and then copy / paste this command into the field run:
  %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf

  If you are prompted to insert the Windows installation CD, ignore this and in the dialog below, replace the path C:\WINDOWS\ServicePackFiles\i386

  Change the path to C:\WINDOWS\system32 if qmgr.dll was only present at this place. **

  Restart the PC and then go to the Services and you should be able to see BITS in the list.

  Double click on it and then on the general tab, click the Start button to start the service manually. This is just a test to make sure that it works correctly.

  If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
  Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

  Reboot again and try once more to start the PIECES. It should work fine now, but in the unlikely case where it fails again, run the following command, and then press ENTER:
  Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

  Reboot once more and then do the following.

  Go to this link and install the IE8 December Update:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=41404

  If you use IE7, use this link instead:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=41442

  Finally, go to the Windows Update site and you should be able to download normally.

• Background Intelligent Transfer Service is listed a @%SystemRoot%\System32\qmgr.dll,-1000

  I am running Windows XP SP3 on a desktop computer. I have a problem with windows update does not, I think the problem is the BITS service.
  In the Services list, Windows Update is listed and put on the market but (BITS) Background Intelligent Transfer Service is listed as ' @% SystemRoot%\System32\qmgr.dll,-1000.»
  I tried to follow the instructions on this link.http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/bits-not-listed-under-services-in-win-xp/9e0a3fe5-e193-4441-b3f4-85df0e9b42aa
  I did a search for qmgr.dll and only found a location C:\WINDOWS\system32.
  Research has not found
  C:WINDOWS\ServicePackFiles\i386
  C:WINDOWS\system32\bits
  I also tried
  Microsoftfixit.wuRNP.13130938846183180.1.1.Run.exe
  Microsoftfixit.wuMATSKBRun.exe
  MicrosofFixit.wu.RNP.12309915728318878.Run.exe
  Don't know why there are three versions?
  I run some antivirus scans and found a problem on a second hard drive. I removed the disk and another scanner so that the C drive is clean. I don't know what caused this, but I don't think it's a virus.
  I think I have my installation disc, so perhaps this is an option to use.
   
  Hope someone can help.
  Thank you

  I am running Windows XP SP3 on a desktop computer. I have a problem with windows update does not, I think the problem is the BITS service.
  In the Services list, Windows Update is listed and put on the market but (BITS) Background Intelligent Transfer Service is listed as ' @% SystemRoot%\System32\qmgr.dll,-1000.»
  I tried to follow the instructions on this link.http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/bits-not-listed-under-services-in-win-xp/9e0a3fe5-e193-4441-b3f4-85df0e9b42aa
  I did a search for qmgr.dll and only found a location C:\WINDOWS\system32.
  Research has not found
  C:WINDOWS\ServicePackFiles\i386
  C:WINDOWS\system32\bits
  I also tried
  Microsoftfixit.wuRNP.13130938846183180.1.1.Run.exe
  Microsoftfixit.wuMATSKBRun.exe
  MicrosofFixit.wu.RNP.12309915728318878.Run.exe
  Don't know why there are three versions?
  I run some antivirus scans and found a problem on a second hard drive. I removed the disk and another scanner so that the C drive is clean. I don't know what caused this, but I don't think it's a virus.
  I think I have my installation disc, so perhaps this is an option to use.
   
  Hope someone can help.
  Thank you

  I think that another procedure also credit Xircal will work for your script, so I copy and paste it here.  This assumes that you have no subfolder named bits in the system32 folder

  Here are the steps to follow if you have qmgr.dll in C:\WINDOWS\system32

  1. Go to C:\WINDOWS\system32, right-click and select new | Folder
  2. Name bits (lower case) If you lose the highlight, click on new folder to select it again and then hit F2. Delete "new folder" and rename it to bits
  3. Open C:\WINDOWS\system32 still once, find qmgr.dll, right-click and choose copy from the menu.
  4. Open C:\WINDOWS\system32\bits and choose Paste. You should see qmgr.dll appear in the bits folder.
  5. Then, go to Start, run , and copy/paste: regsvr32 qmgr.dll and click OK (If you have run on the start menu, hit instead of key Windows + R)
  6. Do the same with this file: regsvr32 qmgrprxy.dll
  7. Restart the PC and then copy / paste this command into the field run:
  
  %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf
• If you are prompted to insert the Windows installation CD, ignore this and in the dialog at the bottom where it says copy the files, change the path to C:\WINDOWS\system32
• Restart the PC and then go to the Services and you should be able to see BITS in the list. Open the Services menu, go to start / run, copy and paste services.msc and click OK.
• In the Background Intelligent Transfer Service BITS or is visible in the list, double-click it, and then click on the Start button. This step is just a test to make sure it works properly.
• If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
  Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll
• Reboot again and try once more to start the PIECES. It should work fine now, but in the unlikely case where it fails again, run the following command, and then press ENTER:
  Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup
• Restart again, and then proceed as follows:
• Go to this link and install the IE8 November update:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41074
• Finally, go to the Windows Update site and you should be able to download normally.

  Update regarding the step #14

The linked TechNet page

http://TechNet.Microsoft.com/en-us/security/dn481339

will give you a link for each update of the cumulative months for internet security explore who you must manually download and install before you will not be able to access windows update

https://TechNet.Microsoft.com/en-us/security/bulletin/MS13-097 is this month December 10

Select the download that is necessary for your version of Internet Explorer and download and install it and restart your computer before you visit Windows Update to get other updates which will then become accessible, after the prior cumulative IE security update is downloaded and installed MANUALLY and the computer is RESTARTED.

• Background Intelligent Transfer service went from automatic to manual and off when the Pc is off

  PC is running XP home 2002 SP3. With the service disabled MS Security Essentials does not update or Windows updates are not loaded. PC updates after I pass the service to self and sart service.

  1. When did you first change Background Intelligent Transfer Service startup to automatic to manual?

  1B. why did you change Background Intelligent Transfer Service startup to automatic to manual?

  2. first MSE (initially) installed on October 29, 2012 or...?

  3. you are a referring to MSE 'default' in your last response. How do you "fail" MSE & when do you have this 'failure' first occur?

  4. didn't you uninstall Norton Internet Security AND THEN (b) download/run the Norton removal tool & restart (c) YOU first installed MSE? [1]

  5. do for Windows XP security update (KB2724197) listed in Add/Remove programs?

  6 no Update for Windows XP (KB2731847) security Update for Windows XP (KB2393802) security or Update for Windows XP (KB971029) is listed in Add/Remove Programs, is that correct?

  7 is a brand new computer or used when you have guessed?

  ~~~~~~~~

  IMPORTANT! => Your version of Flash Player is badly outdated & submitted to thousands of security vulnerabilities. Download Flash Player v11.5.502.110 installed & removed previous versions as soon as possible!  Follow the instructions here-online http://aumha.net/viewtopic.php?f=26&t=46346

  ============================================
  [1] see http://experts.windows.com/w/experts_wiki/89.aspx

• BITS Background Intelligent Transfer Service () are not not in services

  Hi, my computer has stopped automatic update of windows. I use vista 32 bit home premium. It seems that the Background Intelligent Transfer Service (bits) has been disabled. I tried to turn it on, but the problem is IT IS NOT in THE LIST OF SERVICES... so I can't put it on automatic or manual or anything. All the news media say is go to services and and BITS is set to automatic, but how can I do if it is not in the list? !!!

  Whenever I have run windows update it shows "found error code 80246008.

  Someone help pleeease. I'm at my wits end what to do.

  I spent far too long trying to solve this problem. BITS must be recorded first, before you can even begin to try one of the other solutions here: sc create BITS binpath = "c:\windows\system32\svchost.exe-k netsvcs" = delayed automatic start or restart, or go to Services (run: services.msc) and restart it yourself.

• PROBLEM WITH BITS (BACKGROUND INTELLIGENT TRANSFER SERVICE) AND WINDOWS ~ $BT IS NOT CREATED EVEN AFTER ALMOST 25 DAYS OF RESERVE WIN 10 COPY THROUGH "GWX.

  Hey, I heard that the problem was actually the service "background intelligent transfer service" has been collapsed don't know when and how it was stopped. I STARTED THE YESTERDAY(12-OCT-2015) SERVICE AND SET IT TO AUTOMATIC (PREVIOUSLY HAS BEEN SET TO MANUAL). THAT IS WHY I HAVE NOT FOUND THE WINDOWS ~ $BT FOLDER SINCE I RESERVED(18-SEP-2015). I CAN'T EVEN TODAY (13 OCTOBER 15). I HAVE a PROBLEM HERE, THAT PIECES OF ROUND BUT AFTER 2 OR 3 BOOTS, IT BECOMES AUTOMATICALLY ARRESTED AND SET to AUTOMATIC (DELAYED START), that - what THIS MEANS? HOW TO MAKE IT (BITS) ON FOREVER. PLEASE HELP PLEASE HELP? WILL NEVER GET MY FREE COPY OF WINDOWS 10 THROUGH 'GET WIN10 APP '. PLZ ANSWER. PLEASE.

  Hello

  Thanks for posting your query to the Microsoft forum.

  I appreciate your efforts to try to solve the problem and I will definitely help you with this.

  BITS may stop if there is corruption in the Windows files, we can try these methods to solve them.

  Method 1: Run SFC scan

  I suggest that you can exercise SFC scan and check if that helps. The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. It is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  See the link: use the File Checker system to repair missing or corrupted system files

  If this does not help, follow method 2.

  Method 2:

  Please try these steps below and check:

  1. Press the Windows key on the keyboard
  2. Type command line
  3. Right click on and run as administrator

  Step 1: Run the following command at the command prompt with administrative mode.

  SC create BITS binpath: "c:XwindowsXsystem32Xsvchost.exe - k netsvcs" start: delayed-auto

  Step 2: Run these commands one by one in the box RUN or 'Command Prompt'

  regsvr32 oleaut32.dll

  regsvr32 jscript.dll

  regsvr32 vbscript.dll

  regsvr32 msxml.dll
  regsvr32
  softpub.dll
  regsvr32 wintrust.dll

  regsvr32 initpki.dll

  regsvr32 cryptdlg.dll

  regsvr32 qmgr.dll

  regsvr32 qmgrprxy.dll

  Step 3: Restart computer

  You can also download the Windows 10 from the link below and check.

  Download Windows 10 and run the installer from the desktop.

  Note: I strongly recommend to back up all your important files and folders on an external storage device before performing the installation.

  Please post back with the results. We will be happy to help you further.

  ________________

  Thank you best regards &,.

  Isha Soni

• problem with the background intelligent transfer service

  My computer is current only. I checked to see if a problem happens and ran the following messages:
  Potential of database of Windows Update Error 80070002 detected 0 x
  Windows Update needs to be repaired
  Problem with (BITS) Background Intelligent Transfer Service
  I'm using Windows 7 Home Basic Edition

  Service Pack 1

  64-bit operating system

  reference http://support.microsoft.com/kb/910336

• Can I transfer service CC if I update to a new computer? The tutorials have unlimited access?

  Can I transfer service CC if I update to a new computer, somewhere down the line? The tutorials have unlimited access?

  Hi davidm33642164,

  You can certainly use CC on your new computer, because CC allows a maximum of 2 activations http://www.adobe.com/legal/licenses-terms.html

  Below you will find useful information

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  https://helpx.Adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  And yes the tutorials have unlimited access.

  Hope that answers your queries

• I do not use sync and am not connected? Why my favorites are synchronization?

  My desktop computer has a series of bookmarks that I use at work. My home PC has another, different set of bookmarks that I use at home. I do not use sync and am not connected to sync on each PC. Why my favorites are the synchronization between two PCs? For example, I noticed several bookmarks near the top of my bookmark menu over a line of separation that I do not have to work. I deleted them. I come home and find those missing same bookmarks from my PC at home. I do not want to synchronize anything between the two computers, why what is happening?

  Maybe an add-on is the sync these for you.

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.