Using the default date for a variable presentation

Similar Questions

• Win7 always tries to connect by using the default profile for the Native WIFI

  Win7 always tries to connect by using the default profile for the Native WIFI
  I defined a new WIFI profile for my home WIFI network. I use a USB of NETGEAR WNA1100 adapter. The profile is configured to connect automatically. I also moved over the default profile for the Native WIFI. Win7 always tries to connect to the default Native WIFI profile and not the profile that I created. Also, when I restart Win7, the default profile for the native WIFI moves to the top of the Profiles list. Also, when I try to change the default Native WIFI profile to use security WPA2 - PSK (AES) instead of WEP, it allows me to make changes, but he comes back to WEP after it treats changes and attempts to connect to the network. How can I fix so that Win7 will use my profile to connect to my home WIFI network and not the Native WIFI as the default profile. Win7 still connect using the default profile of NativeWIFI despite installing a different profile in Control Panel 'Wireless Networks '. I know that I can edit this profile by default, but anyone know how tell Win7 to use a different profile than the default? I tried to change the positions of the profile so that I want to use is facing up, but no, still uses the default. If I try to remove it, it comes back.
  After removing the two profiles and adding the profile for my home network, Win7 automatically added the default profile for the return NativeWIFI. My profile is configured to automatically connect to the network using WPA2 - PSK (AES) security and the default profile for the NativeWIFI (use WEP security) is the Win7 Setup to manually connect. Also, Win7 puts the default profile for the NativeWIFI above my profile. Also, when I delete the profile by default the NativeWIFI, Win7 it always puts back and he goes over my profile. This is starting to resemble the Win7 manage wireless mechanism for allowing users to add and prioritize the profiles of school boards does not work. Here's another thing that happens: when I try to change the security for the profile default of NativeWIFI to WPA2 - PSK (AES) of WEP, Win7 allows me to make changes, but it is up to the WEP after it processes the changes and tries to connect to the network. This seems too much for me, it's a problem with Win7. If I could do this job, so I need not to set up a second profile.
  The adapter I use a NETGEAR WNA1100 works correctly and I use it without any problem. I have is with Win7 and the interface to 'manage wireless networks '. It will not honor the fact that the WIFI profile that I created for my home network must be connected to automatically I installed. He always wants to connect to the default profile NativeWIFI even if I set up my home network profile to connect automatically. I can do a manual connection for my home network without problem. It seems to me that it is a question of Win7.
  Kind regards
  QRP

  Thank you very much - Netgear seems to have finally accepted as the default network!  If all goes well it will stay like this

  MAS

• I can't have my Subvi simply use the default values for some of its entries?

  I use the code for a DS345 machine, using the sample code from here: http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9149659CE034080020E748...

  I use version 7.0 (because I'm in 7.1).

  Anyway. I managed to get the proper waveform I wanted, just stored waveform in the default values and frequency input, so I can some frequency I want input. When I run the example VI itself, it displays the waveform for the machine just that very well, however, when I use this example VI as a Subvi, it didn't come out of the machine data.

  Any ideas?

  Thank you

  Edit:

  When I say defaults for some of its entries, I mean the values that are usually connected by a user, controls that are not 'inputs' in VI.

  I understood the question, and I must say that I am embarrassed. If you look at the code, I'm feeding a resource VISA name, when the Subvi needs just a chain with the GPIB address number.

• I am trying to use the speakers on my midi keyboard as the default output for Windows 7 device

  I am trying to use the speakers on my midi keyboard as the default output for Windows 7 device. I have a midi keyboard Casio CTK-3000 and you want everything to sound out the two speakers on the keyboard.

  You can not.

  You can exchange midi data between the keyboard and a PC via the USB port. But not strong like the keyboard is not an audio device and therefore doesn't have the proper drivers.

  MIDI is not good in itself, it's just that a series of statements sent to a electonic module that transforms these 0 and 1 for sound samples. This isn't the same principle as an audio card/device.

  See you soon,.

  Jerry

• What value for p_print_server when you use the Rest Data Services as a print server?

  Hello

  I have my report server on the internal workspace defined as BI Publisher URL as default... It works for my BI Publisher reports.

  I have 2 reports who need to use the rest Data Services FOP engine and use GET_PRINT_DOCUMENT function Signature 4

  https://docs.Oracle.com/CD/E59726_01/doc.50/e39149/apex_util.htm#AEAPI146

  For these 2 reports, I need to pass a parameter to p_print_server. The documentation describes this as the URL for the print server

  My question is, how to find the URL for p_print_server when I want to use the rest Data Services FOP on ADR?

  I can not put as NULL as at the time, it will use the default BI Publisher URL and then these 2 reports will not work

  Moreover, when I put the server reports on internal workspace as 'Rest Data Services', my two reports work fine, but not when I put is as URL BI Publisher - which is necessary

  Help, please

  Concerning

  Matt

  Hi Matt Mulvaney,

  Matt Mulvaney says:

  I already have the correct configuration to be able to produce reports FOP including two steps you mentioned. This set works very well when I put the "Print server" preference in the settings of APEX Data Services Instance remains - and reports can be produced. But as I said, this must be set to a URL of BI Publisher.

  If you use "Print server" as "Oracle BI Publisher" then the p_print_server parameter would have been:

  http://myserver.mydomain.com:8888/xmlpserver/convert

  Where:

  • Printing of the address of the host server: myserver.mydomain.com (you can also use the IP address)
  • Print Server Port: 8888 (depending on what your BI Publisher Server uses port)
  • Print server script: / xmlpserver/convert

  Similarly, if you choose "Print server" as 'Oracle REST Data Services', the instance settings don't ask questions on the print settings, but internally it uses the following parameters and the p_print_server parameter is:

  http://myserver.mydomain.com:8080 / ADR / _ / fop2pdf

  Where:

  • Printing of the address of the host server: myserver.mydomain.com (host computer on which ADR is hosted)
  • Print Server Port: 8080 (the port used by what ADR/APEX Forum)
  • Script of the print server: / ords / _ / fop2pdf (this is not disclosed by APEX/ADR documentation, but as mentioned by Marc Sewtz in the following thread)

  Reference: Re: Apache FOP disappeared by Oracle APEX installable APEX 5.0 and 5.0.1 APEX

  Kind regards

  Kiran

• How to change the default attributes for an index for a subpartition without data in it

  Hello

  The use of oracle 11.2.0.3 attributes and modifydefault for a partition, for example the tablespace can but can not use the same syntax for a subpartition.

  Is it possible to change the default attributes for a subpartition?

  ALTER index RTRN_CUR_CONV_IDX change the default attributes for the subpartition SYS_SUBP64934 RTRN_PART_201505 tablespace

  Thank you

  Refer to the section of the doc "a Subpartition template editing.

  http://docs.Oracle.com/CD/B28359_01/server.111/b32024/part_admin.htm#i1007904

  A Subpartition template editing

  You can change a model of a composite partitioned table subpartition by replacing it with a new model of subpartition. All subsequent operations that use the subpartition template (such as ADD PARTITION or MERGE PARTITIONS ) will now use the new subpartition template. Existing subpartitions remain unchanged.

  If you change a subpartition of a range model * composite partitioned table, then of range partitions that have not yet been created will use the new subpartition template.

  Use of the ALTER TABLE ... SET SUBPARTITION TEMPLATE statement to specify a new subpartition template. For example:

  You will need to 'fix' the new model as in the doc example.

  By the example of partitions with just a line in them, we find the secondary partition with data correctly a tablespace name as expecetd, but 4 other secondary partitions always show the name of the default tablespace in user_ind_subpartitions.

  Any idea whay and if can change

  Change the template affects only the created NEW partitions/subpartitions. If you want existing subpartitions to a different tablespace, you will need to move it.

• Using the Serial Port for data acquisition Non-Serial

  I searched the forums and can't find anything on this topic.

  I saw that it was possible to use the parallel port for e/s digital single and I was hoping that the serial port can be configured the same. It seems all VI VISA only to use the serial port to receive ASCII characters at a given flow rate, but is it possible to simply query the status of the line series at my own speed to see if it is high or low, kind of like a single pin DAQ?

  It seems that it would be possible until the serial data are read and controlled by labview, not Windows. Let me know if you have ideas of how to approach this problem, or any comment as to why it is not possible.

  Thank you all!

  Select the property > settings series > Modem of the line parameters. For example, the State of the CTS is an entry to the pc.

  With the help of these lines is a very poor substitute for a scope or map DAQ. The only things you can return is Asserted, Unknown or Unasserted. The range of acceptable signals is important enough. Anything between + 3 and -3 is an unknown state. Your other signals is + / 3 to 15 volts. What type of signals do you really want to capture?

  Edit: there is no such thing as a visa so I have no idea of what you actually use.

• The default value for a property with data of type boolean

  Hi all

  Is it a system preference setting, where the default value for a property with data of type boolean can be a Virgin? I want to keep the value by default in a vacuum, but every time I save the property even after empty selection, the default value changes to FALSE.

  

  In this case Boolean doesn't help you, you mayneed to create a chain of ownership and have true/false / "" as your list of values

• date of the such as default date for entry date component?

  Hello world

  My version of Jdev is 11.1.2.3.0.
  I have a component of af: inputDate and a table on my page of the ADF.
  After selecting one of entry date of the value changes the listener triggers and updates the table based on the date below. Everyhting works fine.

  But when load us the page the entry date is empty, I need to display the current date as a default value, then after new seleting date that the table needs to be updated.
  How can I set current date as the default date in the entry of date component?

  All suggestions will be really useful.

  Thank you.

  In other words, check to see if the binding property to date. MinValue have the correct value:

  Binding = "#{viewScope.ManagedSampleBean.date1} '"

• create a button for CONTABILISER instead of using the default

  Can someone give me the code for calculating the total no of records displayed in a form instead of using the default CONTABILISER functionality provided by oracle in the menu bar

  Hello

  You can make a count_query on the block to get the no. documents and then use a get_block_property ('', query_hits) to get the value.

  For ex.

  go_block('my_block');
  do_key('COUNT_QUERY');
  message(get_block_property('my_block',query_hits));
  

  Arun-

• ACS Auth: Use of group data for the authentication of the user-> security problem?

  IM only using a VPN-installation (router, ACS, Cisco VPN Client) and I noticed that the name of the Group and the Group decrypted password can also be used in the second step of the authentication (the extent of authentication or authentication of users), which is a big security concern. What wrong with my setup.

  For the test I have set up a VPN configuration as described in cisco documents. Here, it also works. The identification information of the Working Group in the authentication of the user, too, which is quite logical, because the group credentials are also a user in the database of GBA. Of course, this user can be authenticated in the user authentication process.

  Who is wrong? How other admins to solve this problem? Am I wrong in my approach?

  Thank you!

  Yes, permission will have password for "cisco", at least for isakmp and pki. The group will send its name and password Cisco to receive the av pairs (ASA has a function to create a "good word of different past" but he's not here on IOS, AFAIR)

  It is a restriction known - you should not use the same server for authentication and authorization, with IOS and ASA.

  Did you give this property (either / or):

  -local isakmp authorization

  -l' authentication certificate (Group)

  -sharing features for authentication and authorization between servers.

  I don't think we can do much wise configuration to prohibit this behavior.

  Edit: spelling correction.

• Is it possible to use the default value as sql expression in obiee 11g report?

  Hi all

  Is it possible to use the default value as sql expression in obiee 11g report?. Actually what I'm trying to make is that we send an ibot users. They want the same default values that are assigned in the command prompt in the report. So when we send the ibot it shows the report for default values assigned in the report criteria which is obsolute. As a solution, I kept the report in a dashboard page and send the dashboard like ibot page. But the problem here is that I can send only pdf format. Is it possible to do so at the level of the report (without using session variables). I want something like that

  Date between Date ' @{PV1} {Timestampadd (SQL_TSI_DAY,-90, CURRENT_DATE)} and Date ' @{PV2} {CURRENT_DATE}

  Thanks in advance

  Thank you

  AJ

  http://www.w3.org/2001/XMLSchema-instance"container ="http://www.w3.org/2001/XMLSchema"xmlVersion ="201201160' xmlns:sawx="com.siebel.analytics.web/expression/v1.1" > "

  "Question time '." Date '.

  "Question time '." Date '.

  BOX WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 1) THEN TIMESTAMPADD (SQL_TSI_DAY,-2, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 2) THEN TIMESTAMPADD (SQL_TSI_DAY,-3, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 3) THEN TIMESTAMPADD (SQL_TSI_DAY,-4, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 4) THEN TIMESTAMPADD (SQL_TSI_DAY-5 (, cast (max (CURRENT_DATE) date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 5) THEN TIMESTAMPADD (SQL_TSI_DAY,-6, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 6) THEN TIMESTAMPADD (SQL_TSI_DAY, 0, cast (max (CURRENT_DATE) as date)) WHEN (DAYOFWEEK (cast (max (CURRENT_DATE) date)) = 7) THEN TIMESTAMPADD (SQL_TSI_DAY-1, cast (max (CURRENT_DATE) date)) END

• Dashboard page. How to do it as a page of the default dashboard for all users.

  Hi all
  
  I created a dashboard with a page to publish the ads. Now, I want to make this dashboard as the common dashboard for all users. I donot have the catalog presentation groups where to use the LDAP protocol in my org.
  
  Thank you
  S

  Hello
  We can do this by using the session System Portal path variable

  Reference http://obiee101.blogspot.com/2008/06/obiee-directing-user-to-default.html

  Thank you
  Saichand.v

• Best way to set the default values for the form elements

  Hello
  
  I have a form with a lot of defaults that is mentioned below...
  

    Field                      value  
    created by             :APPL_USER
    creation_date         SYSDATE
    last_updated_by     :APPL_USER
    last_update_date    SYSDATE
    item1                     value1
    item2                     value2

  I am currently using calculation-> after presents... then when we create/update a record... these computaion takes place and the default value for the inserted values get... THIS WORKS PERFECTLY WELL.
  
  I want to know... If this approach is fine OR we can have a better approach to achieve...?
  
  Thank you
  Deepak

  Hello

  I think it's good if it fits your need.

  But why you have these fields in the form?
  created by: APPL_USER
  CREATION_DATE SYSDATE
  last_updated_by: APPL_USER
  last_update_date SYSDATE

  The user can enter the ones?
  I thought that those who are to audit and I would fill those drop with trigger in the database.
  So that you get the same "correct" values if you need to manipulate the data with example of sql client

  BR, Jari

• How to use the default value of a column in a table in insert or upda

  Hello
  
  I try to use the values by default so that the user should not have to enter data, but when I select default type and a default, I see an error message if I try to add a new line.
  
  How can I use a default value to a column in a tabular presentation?
  
  Gouri
  
  Published by: user1046395 on April 3, 2009 09:58

  Gouri,

  You can change simply to attribute each report column. For example,.

  To set the default date.
  Default type: PL/SQL Expression of function
  Default: sysdate

  To set the default text,
  Default type: PL/SQL Expression of function
  Default: * "CLERK."

  If you still get an error, what is the error message?
  Tarraf