Using the keyboard to set the visemes?

Similar Questions

• I can't find instructions on setting up or using the keyboard Microsoft Wireless Comfort 1. 0a.

  I can't find instructions on setting up or using the keyboard Microsoft Wireless Comfort 1. 0a.  I GOOGLED it but the only reference I find tells me to go to the download page on the Microsoft Web site for this product.  I went to this site and the only thing it is limited warranty info and Product Guide.  I downloaded the Product Guide, but it only covers the basic information like it do not immerse in water, do not take part and the various regulations of the FCC about the product.  There is no info in this guide on how to configure or use the keyboard AT ALL.  Guidance on how to use this product is probably somewhere?

  The dongle is not plug it into the keyboard, it plugs into the USB port on the computer.  Wireless keyboards is not related to them - think of that.  :-)

  If you are missing parts to the keyboard, I would just buy a new one.  You can buy wired keyboards for as little as $4 these days, wireless are a little more expensive of course.  Personally, I find the wireless keyboards to be a pain because the batteries always come out in one in-opportune times.  YMMV

  Good luck.

• Is it possible to set up a slideshow in Muse that will allow a user to use the arrow keys on the keyboard to advance the slides in a browser?

  Is it possible to set up a slideshow in Muse that will allow a user to use the arrow keys on the keyboard to advance the slides in a browser?

  Hello

  Take a look at a similar debate here

  Re: To navigate in the slide show with the arrow on the keyboard?

  keyboard control arrows to slideshow and lightbox Widget

• I am unable to Type or use the keyboard in Firefox 18.0 anywhere, including the search bar and URL bar. How should I fix this?

  I am unable to type anything or use the keyboard to type in Firefox. I use Firefox 18.0 installed on Windows 7.
  I am able to paste in the URL bar and the search bar, but absolutely not able to type in it.
  I already tried the 'reset' option but are still unable to type.
  Also tried Firefox in safe mode with disabled addons but are still unable to type.
  Install a new copy of firefox after Firefox uninstall and delete the old "Mozilla Firefox" in windows folder. but always impossible to type.
  Please tell me a solution to this.

  Have you tried restarting the computer?

  It is possible that you have activated the keyboard by chance to one who does not work in Firefox.

  • http://support.microsoft.com/kb/258824 - how to change your keyboard type

  Windows remembers the setting by application keyboard layout and you have probably changed the keyboard by accident via a keyboard shortcut.

  • http://Windows.Microsoft.com/en-us/Windows7/the-language-bar-overview The language bar (overview)
  • Make sure you have the language bar visible on the Windows taskbar
  • You can do this via the context menu of the taskbar: toolbars > language bar
  • Check the language setting (keyboard) keyboard for the application that has focus via the icon in the language bar
  • You need to do that while Firefox has focus because Windows remember the keyboard by application setting

  Control Panel > regional and Language Options > keyboards and languages > change keyboards > advanced key settings > change key sequence

• Change the language using the cover of keyboard to excite Pro AT10LE-A-108

  Hello

  I bought a Toshiba * excite pro AT10LE-A-108 / PDA0EE tablet (Android 4.2) *,.
  It's Toshiba * UK cover of keyboard (English keyboard) / PA5132E-1EKB *.

  I want to change the language by using the keyboard from English into Greek.

  The tablet includes Greek for the supported languages, I can write about it in Greek
  but I can't change it is + keypad +.

  Can someone help me to do?

  I assume that you have not configured the settings for the external keyboard.
  In Android settings: language and entrance you need to find the option to set up the input method

  Downstairs, you will get the option for physical keyboards.
  Him that you have to touch the Bluetooth keyboard. Then you should be able to choose the keyboard configuration. Now select the language of the keyboard.

  In the new window, you will find the advanced option
  Here, you can also choose the layout for external keyboards

• 6 s iPhone crashes when you use the keyboard

  Hi guys

  My iPhone (iOS 9.2.1) 6s freezes when I use the keyboard, doesn´t question in what program. After about 10-15 seconds to stop the gel, but only until I have started typing again. The only why to solve the problem is to "quick restart" operating the phone down the sleep and home button and release the home button when the screen goes back to the home screen. I ve already searched the net and tried several solutions, without any effect:

  Full reset

  Reset

  Disable iCloud for documents

  Disable third party including the emoji keyboard keyboards

  My best guess is that the problem has something to do with the timing of RAM or iCloud phones somehow...

  All the ideas!

  Best regards

  Mads

  Hi Samzonite,

  I understand that you are having problems with the keyboard on your iPhone. Let's see if we can get that worked.

  Based on the diagnosis that you have done so far, it seems you need to restore your iPhone and set it up like new. This will allow you to isolate the problem to sync your content back plus one. Take a look at the article below for more details on this subject.

  How to clear your iOS device and then set up as a new device or restore from backups
  https://support.Apple.com/en-us/HT204686

  Nice day

• Using the smart keyboard, I get invalid characters in the standard IOS search box. How can I get the correct character to use?

  The intelligent keyboard on my iPad Pro works fine all the time except when I go to the search feature of iOS. As soon as I go ahead and start typing I'm extended character set characters rather than the face value of the keys I hit. Is there a setting that changes the character set used by the search feature with the Smart keyboard? On-screen keyboard works fine, but it's a nuisance by disconnecting the Smart keyboard everytime I want to search for.

  Thank you

  Steve Lewin

  What you get in the search box when you type asdfg?  Is - this ass∂ƒ?

  What language your OS and keyboard are set on?

• J053ea HP Envy 17 - using the touchpad and keyboard simultaneously

  I just bought the laptop of HP Envy 17 in Windows 8.

  One problem I have is when running games such as Call of Duty, I need to be able to use the touchpad with the keyboard to control the game properly.  It seems that, once I have a key that is pressed, the computer does not accept any entrance of the touchpad until I release the key.

  Will there be an option in the Panel, maybe I need to change to enable the simultaneous entry of keyboard and the touchpad?

  Thank you.

  Hello

  This problem may be caused by a touchpad setting which is intended to avoid any accidental activation - for example if your Palm brush the touchpad when typing.

  You can change this as follows.

  Open windows control panel and on the top right, next to the display by: select "large icons".  In the new page layout, select the entry of Synaptics.

  The hardware/software version will depend on real option that you're looking for (see the example below), but it is usually called 'check' Palm or Smart Sense'-disable this function and apply the changes.

  

  Kind regards

  DP - K

• Cannot use the numeric keypad codes alt with usb keyboard.

  I just bought a bow of Microsoft keyboard for use with my Vista system. As I am a programmer and the keyboard is missing a number pad (which I use frequently for the entry of characters alt-code), I bought a USB keyboard separated (from Targus - model AKP10CA) mainly to enter alt character codes

  To my dismay, the alt codes don't work! I checked the keycodes that sends the keyboard with a keylogger, and they are the correct numeric keypad keys. So my question is why these don't work with my Microsoft Arc keyboard alt key, and what I can do about it?

  Thank you.

  Well, at least we have excluded the keyboard as the problem - I don't really think it was but it was worth checking out.

  I don't know (I don't use keyboard shortcuts), but have you tried turning on the number lock on your keyboard and using the numbers on the different keys on the keyboard that are used instead of a numeric keypad when you don't have available?  I don't mean the numbers at the top (I know that they do not work) but if you set the keyboard for some keys work as a numeric keypad, and then perhaps shortcuts using these buttons by activating the NunLock will work as expected.  Always turning on one off the NumLock sort of defeats, the goal to make shorter (but it can work entirely from the keyboard that was your question).

  I do not think it is possible to get this work because the keyboard and the numeric keypad USB are separate devices and do not speak to one another - can 'see' what is happening on the other device and there is therefore no way to make them work in oncert.  The system does not recognize that the two entries are supposed to actually a single action and I don't know any way to tell the system how to do if it is possible at all (even with a registry change).  I have no idea where to start comiing even upward with a workaround.  I think you just need to live with the fact that you can not use the devices together to issue commands.  Maybe you can change some of the most frequently used shortcuts involving the keypad for a different shortcut, not requiring that the keyboard - shortcuts can be re-scheduled (and if you can not re - schedule a current shortccut you ccan still create a new shortcut using only the keyboard, which performs the same function).

  I'm sorry, there is no real solution to your problem, but it's the way Vista works and we just have to live with it, the better we can.

  Good luck and best wishes!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Now, many of my keys are shortcut keys. For example, 'L' now disconnect me and "N" takes me to the computer. I can no longer use the keyboard.

  My big cat crossed my laptop keyboard Dell (with Vista) and now many of my key take me in crazy places. This happens in all programs. I can't use the keyboard to type. Is anyone know how it happened and how to fix it?  Thank you very much

  Hi Ruby94947,

  Things you want to try:

  O examine your keyboard for any accumulation of dust, dirt, liquids or other particles that could be causing the keys to type characters.

  Ø Disengagethe (FN) key on the keyboard, make sure that the led of the button turns off.

  O check if your number lock (NumLock) key is enabled. If so, the key to disengage.

  O confirm that your keyboard is set to the English language.

  1. open regional and Language Options by clicking the Start button, click on the Control Panel, clicking clock, language, and region, and then clicking regional and Language Options.

  2. click on the keyboards and languages tab and then click on change keyboards.

  Make sure that the keyboard is set to the English language.

  If the problem persists, contact DELL for assistance.

  http://support.Dell.com/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I want that my users who log on to the virtual remote desktop to use the one I put in this image and not their local keyboard

  Original title: the remote keyboard language

  Hello

  I connect to a remote virtual desktop. My local computer uses a different keyboard language than the remote.

  I want that my users who connect to the virtual remote control to use the one I have set myself in this picture and not their local since keyboard only supports us that we provide in the virtual, not on their local machine.

  I've tried the "Reg" IgnoreRemoteKeyboardLayout key, but I've been the opposite. Who closes?

  Is their a way to force the RDP to use the remote keyboard and not local?

  Thank you

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand you have questions using the remote keyboard on the Windows computer. So, please follow the link below to post your query in the Technet forums, because they have more expertise on this issue.

  TechNet forums

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  I hope this helps.

  Thank you

• Impossible to type a few letters on the keyboard, even using several keyboards.

  Original title: G and H stickin,-this happens when I use you wireless but also laptop keyboard you

  It is a sample of wat appens wen I'm tryin to type. Started with the problem n bein you - I ran restoration and after awhile tat went and H (upper and lower case) become problem. Now G participated! Am ready to cuck laptop out the window! Spell checker does not always pick up missin letters cannot be used for work or even for the emails of the doin.

  Hello

  1. What is the number of brand and model of the laptop?
  2. are you having the problem with the keyboard while using applications or with a particular application?
  3. were there any changes made on the computer before this problem?

  Method 1:
  Check the link and try to run the Troubleshooter:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:
  If the problem persists I suggest to start the computer in Mode safe mode with network and check whether you are faced with the same question. If the problem does not occur in Mode safe mode with networking you perform the clean boot to find what service or startup item is causing the problem.

  Step 1:
  Start the computer using safe mode with networking.

  (a) remove all floppy disks, CDs and DVDs from your computer, and then restart your computer.

  (b) If your computer has a single operating system installed, press and hold the F8 key as your computer restarts.

  (c) you must press F8 before the Windows logo appears.

  (d) if the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  (e) on the screen Advanced Startup Options , use the arrow keys to select the desired mode safe mode with networking option and press enter.

  (f) sign in your computer with a user account with administrator rights.

  Reference: http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:
  If the issue happen not in Mode safe mode with networking, try to set up your computer in a clean boot state and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3:
  I suggest you to use the keyboard on the screen and check if it works. You can check the links
  http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard

  If you are able to type on the keyboard screen I would contact the manufacturer of your laptop for extra support.

  I hope this information helps!

• NSX Manager automatically sets up when it is deployed using the OVFTool

  Hello!

  I am curious...

  I've been able to deploy my NSX Manager device without any problem...

  The following command deploys the NSX Manager device successfully. However, the device is not able to set passwords and the INVESTIGATION period.

  When the unit starts for the first time I connect with the default user name and password.

  Then I have to run the "setup" command to set the IP address.

  What could be wrong? Is there something missing in the deployment command?

  I can resolve the hostname of the device by the hosts of ESXi, PSC and VCS. I can also do a ping between all of them.

  The exception is the device of the NSX. I am only able to get a successful ping response after you run the setup command and reboot the device.

  ./Tools/OVFTool/OVFTool--acceptAllEulas--allowExtraConfig--prop: vsm_cli_passwd_0 = XxXXxxX! 01 - prop: vsm_cli_en_passwd_0 = XXXxxxXX! 01 - prop: vsm_hostname = mgmt - nsxm.z01.virtlab.local - prop: vsm_ip_0 = 172.31.10.18 - prop: vsm_netmask_0 = 255.255.0.0 - prop: vsm_gateway_0 = 172.31.0.1 - prop: vsm_dns1_0 = 172.31.0.2 - prop: vsm_domain_0 = z01. virtlab.local - prop: vsm_ntp_0 = 172.31.0.2 - prop: vsm_isSSHEnabled = False - ds = ds01-mgmt-c01h02 - n vs_mgmt_nsxm - network = temp_NSX... = /05_Repo/VMware-NSX-Manager-6.2.1-3300239.OVA vi://172.31.10.10/mgmt-sddc/host/mgmt-c01/mgmt-c01h02.z01.virtlab.local/

  Source of EGGS opening:... /05_Repo/VMware-NSX-Manager-6.2.1-3300239.OVA

  The manifest is valid

  Source is signed and valid the certificate

  Enter the connection information for the target vi://172.31.10.10/

  Username: [email protected]

  Password: *.

  Target of opening VI: vi://administrator% [email protected]: 443/mgmt-sddc/host/mgmt-c01/mgmt-c01h02.z01.virtlab.local/

  Deployment to VI: vi://administrator% [email protected]: 443/mgmt-sddc/host/mgmt-c01/mgmt-c01h02.z01.virtlab.local/

  Transfer completed

  Caution:

  -Option ExtraConfig "keyboard.typematicMinDelay" is not allowed, he will jump.

  -ExtraConfig options exist in the source.

  Completed successfully

  Best,

  H

  Post edited by: Håvard

  The solution is to include the '-powerOn "switch in the command

  In my lab, I didn't want the unit starts automatically, because I wanted to reduce the amount of RAM 8 GB before I put on.

  The correct approach in a lab environment would be to let the device starting using the '-powerOn "switch in the command and then it off once it has started for the first time.

  Turn off the power and reduce the amount of RAM and power and then turn it back on.

• I WANT TO CHANGE MY CODE TO USE THE LEFT BUTTON = PREVIOUS IMAGE / RIGHT OF THE IMAGE NEXT TO ANY KEY KEYBOARD = NEXT IMAGE. HERE IS MY CODE.

  I WANT TO CHANGE MY CODE TO USE THE LEFT BUTTON = PREVIOUS IMAGE / RIGHT OF THE KEYBOARD = NEXT IMAGE TO

  ANY KEY = IMAGE NEXT. HERE IS MY CODE. PLEASE HELP ME OBI WAN KENOBI, YOU'RE MY ONLY HOPE:

  Stop(); stage.addEventListener (KeyboardEvent.KEY_DOWN, changeSection); function changeSection(event:KeyboardEvent):void {switch (event.keyCode) {case Keyboard.RIGHT: nextFrame(); break; case Keyboard.LEFT: prevFrame() ;}}}}

  Your problem seems to be a matter of not understanding what version of the code that you use compared to what your file is configured to use.  Your other display uses AS2, so if you want this to work you must set the parameters of publication for AS2.

  If your file settings are for AS3 code that show you in this announcement will be suitable for this because it is the AS3 code.  The function would change to what is shown below.  Mgiht want to use a listener KEY_UP instead of a listener KEY_DOWN.

  function changeSection(event:KeyboardEvent):void {}

  nextFrame();

  }

• Use the keyboard to enter text on the stage

  Like others here, I'm kinda a novice. Used to use the Director and Lingo years before, but am very rusty and the rest on something, I had understood years before.

  For my project, I need the user to be able to enter text in a field of text during the demo. Basically I'm just trying to understand how to do so that I can enter text on the stage via my keyboard using Lingo. I did a search on this site, but couldn't find something from this base in discussion.

  I am using Director 11.5 and the finished demo runs on a PC and a Mac. Any help would be incredibly well received.

  What part of this are you having trouble with? If you add a #text or #field member to the stage as a sprite, and their #editable property is set to TRUE, you should be able to enter text in the other.