Using the model WRT54G v.3 for the wireless with my computer
I have been using the router for 4 yearsw with a cable. Now, I want to go wireless.
When I go on my Dell laptop, I see that I am connected and I have good signal. But he is blocked.
I used the instructions in Dell diagnostics, and he said get the address and type it in the web browser, then follow the instructions.
A submenu appears when I did it, and he asked my user name and password. I did have one, so I called Linksys. They couldn't help me because it was out of warranty, even though today is the first time that I tried to go wireless. They gave me this address to get my user name and password. I can't find.
What should I do to unlock my connection so I can use the wireless router? Thank you, Dex
So this means that you don't know the security key for your wireless network, in this case you must connect to your router configuration page and find the security key. Here's the instruction how to find your wireless security key.
Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1
Let the empty user name & password use admin lowercase... (If you have changed the password for the router, you must connect to the router using this password).
For wireless settings, follow these steps: -.
Click on the Wireless tab...
For wireless security: -.
Click the sub-tab under wireless > wireless security... and below, you will find the Security Mode and your security key. Note your security key, and now you can try to connect to your network wireless using this security key.
If you want to disable security on your router, under the Security Mode, select Disable and click on save settings.
Tags: Linksys Routers
Similar Questions
-
I installed Microsoft Flight Simulator 2000 Professional Edition, on my laptop. I bought an old Microsoft Sidewinder Precision Pro joystick. Can I use the joystick with my Vista Home Premium OS?.
Hello
What is the model of the sidewinder Precision Joystick?You can use it with Vista, but sometimes it can cause a problem. Check the link and if you have a problem follow the steps in the article.You experience problems when you use a Sidewinder Force Feedback Pro joystick with Flight Simulator on a Windows 2000, Windows XP, or Windows Vista-based computer
http://support.Microsoft.com/kb/294672 -
Original title: lifecam 3000 and Skype does not?
Hello, I tried the two 5.5 beta and 5.3. When I try to use the webcam with Skype it blocks Skype and says "Skype has stopped working windows is checking for a solution." I have windows update connection bars 4/5 drivers and my computer ==> http://www.newegg.com/Product/Product.aspx?Item=N82E16883103361 help is appreciated, thanks
Hello, I had just fixed yesterday. I deleted the drivers and programs that accompanies it, it ends up being the lifecam software that comes with it interfering with Skype, thanks to all who help :)
-
In iPhoto, I could simply use the trackpad with 2 fingers rotating motion to change photos quickly to stand. In the Photos but it seems I have to use the Edit menu, etc. etc.?
command + r or command + option + r, depending on the direction you want.
Also, right-click on the image to the same command, hold the option for the choice
-
I have a HP DV7-4165 which has Windows 7 64 bit and simple features of the HP pass identity protection using the drive with the tips of the fingers. My Firefox support says "If you have the Firefox browser on your computer when your HP SimplePass Identity Protection software is installed, a Firefox extension will also be installed which enables support for the use of the fingerprints with the browser Firefox." Once I updated to Firefox 4 it no longer works.
You can get Firefox 3.6.16 here:
http://www.Mozilla.com/en-us/Firefox/all-older.html -
Satellite A300 - how to use the recovery with external DVD drive disc?
Hello
I bought a toshiba Satellite A300 - 15 d
FTM the tsscorp drive that is installed in the camera no longer works (does not detect any type of media what so ever). ) need to recover the laptop, so I used a USB DVD drive to boot from the restore disc, but after that the charges of recovery console it says waiting for media in the f: drive, which is the tsscorp drive although I used an external drive to load the disc.
What files should I edit to make it to load from the drive externally and if this isn't the solution, what do I do?
Thanks in advance
Hey Buddy,
Unfortunately I think that it of not possible to use the recovery with external CD/DVD drive disc. Therefore, place the internal for use the recovery disc.
You can get a new drive to an authorized service provider.But if the original OS from Toshiba is installed, you can use the function of disk recovery HARD reinstall Windows as well. Go to the advanced boot menu (F8) and select Repair my computer :)
-
I have XP Epson-610 and have scanned on it successfully for years. To date, but when tried to open I get the ap scanner, the scanner is attributed to ImageCapture. Using the scanner with TWAIN? ImageCapture does not work on El Capitan? What is TWAIN, a printer-scanner driver?
Thank you.
TWAIN is an old scanner interface. OS X now use ICA, Architecture (?) of Capture of Image.
Never seen this message, but I guess that means Capture of Image is using the scanner, or is configured to use the scanner and it is not necessary for the third party software. You open picture Capture, or did the scanning software provided with the scanner by Epson?
-
When the window 8.1 do a update my wireless printer goes offline!
How can I get this back online in wireless mode.
I have to use the usb to print. It take away my freedom
Provost
Thanks for the tips!
I discovered that I was looking in the wrong place for a solution!
the laptop was not the answer.
I had to go to the printer and a wireless network test, because the test and reset the network using the Wireless Setup Wizard. all is well now!
Thanks again for your help.
Artret
-
Can I use the Wireless Comfort Desktop 5000 keyboard and receiver with a Mobile 4000 mouse?
Hi, as the title says: can I use the Wireless Comfort Desktop 5000 keyboard and receiver with a Mobile 4000 mouse? I have the kit, but the mouse is to bulky for me and I would use a mouse Microsoft Mobile 4000 but with the same receiver as the keyboard of the kit, is it possible? Thank you
Hello
looks at it's not going to work. Wireless products are programmed to be used with a specific key, so they won't work on another dongle.
B Eddie
-
use the camera inbulit of computer laptop sony vaio cs
use the camera inbulit of computer laptop sony vaio cs
Hey Dr. Anil.V. George,
Welcome to Microsoft Vista Forum!
You need to install windows live messenger to use the webcam to not being able to video chat or use a video recorder to third parties to use the webcam.
I recommend you consult the following link for more information on the use of the webcam:
http://www.Microsoft.com/Canada/Home/communications-and-mobility/articles/webcam-basics-how-do-they-work.aspxIf the latest driver updates are required, you can also check the manufacturer's Web site to download the latest version of the driver for the camera for the edition of Windows Vista installed on the computer, or if you have received a Driver from Sony disk, you can try to install the drivers for the camera using the disc.
Hope this information is useful.
Let me know if it worked.With regard to:
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I chose to try the upgrade of Windows 10 on my laptop primary. Because of the long installation times, I started late in the evening then followed finishing (or almost) the update the next morning. Until I sat down to 'start' I spoke with a friend who had just completed an installation of two heavy day of problems. Although I am good enough to solve computer OS and software installation problems, I was very reluctant to go forward. After serious soul searching I elected continue to use Windows 7, I don't really like.
That's why I chose to use the system restore before restarting my computer needed complete Windows Update 10. I chose the previous restore point before the update of windows 10 and ran through the entire procedure and then restarted the computer after the restore point.
Everything worked fine and I was able to do the foregoing... Except that I can't do updates of security that have been uninstalled. The Windows Update screen repeat "you must restart your computer...". "with the reboot by holding the active button.
This window doesn't go away even after reboot, and I can not "check for Updates".
Does anyone have any suggestions on how to reset this program if I can do all the updates except Windows 10 security.
Thank you for any assistance.
By using the system restore before computer restart after updating Windows 10...
Sorry, System Restore does not cancel the major updates, that's why a lot of automatic updates delete all system restore points. The tool that is appropriate in this case would be a restore Image. If you have not created an image before the upgrade, then you are out of luck.
-
The PDF button does not work since I use the scanner with an ASUS i5 running Win 7 Ultimate desktop computer. I downloaded the 64-bit Epson software for the scanner.
I found the solution to the problem, and it is indeed with the revised in Windows 7 Control Panel.
Here how to solve the problem:Go to the control panel in Windows 7.Search scanner in the upper search box to the rightYou will see a "view scanners and cameras".Click it, you will see the Epson Perfection V200. Highlight.Click Properties, then Yes, then events.Where it says select an event, you MUST choose the event suitable for each option.To the Start button, choose Start the series of creativityFor the copy button Choose launch Epson ScanE-mail button also Epson scanPDF includes Epson scanThere you go.Now, all this was not necessary before, there are no instructions, and the fault lies with MS. how much more confused MS will do the control panel? -
With Windows Vista and Windows 7, I put the mouse to use the option with a single click to open files and programs desktop. I can't find this option in Windows 8.
HelloThanks for the post about Microsoft Community.I understand that you don't want to use the simple click instead of double click of the mouse that you used in Windows Vista and 7.I would ask you to please follow the steps below to activate the option just click on the button of the mouse in Windows 8.un) Please move the cursor to the bottom right and click on the search box, which is the first option in this Panel.b) in the search box, type Control Panel, and then click Control Panel.c) after opening the Control Panel, you will see many programs such as the system, network and security, Internet, hardware and sound, and other programs. Click "appearance and personalization".d) now click on the folder option to open it.e) now you will see many options in the folder option. Now, click single-click to open an item (point to select).f) now click on apply and ok to turn this feature on your computer.I hope your problem is solved now. Please feel free to write back if the problem still persists. -
I bought the DC of Adobe Acrobat pro and completed the info online, but when I use the cd with the product code key it will not take the code? What do I do then?
Thanks Anubha Goel, final I got it to work... The serial number in the physical box that you buy in the store wasn't the number for the software. It was the serial number in the cloud, very difficult to know when you see a serial number in the box with the Cd online. But thanks for the reply to my post. I'll be in offline mode after clicking on answer... Thank YOU Ana Maria
-
Problem opening pdf files. I have Acrobat DC/Windows by default, but when I click on the file, a file conversion screen now with all these language codes. Must use the "open with" function which is a nuisance. Why it will not open by default when I click on the file?
Hello
I guess that you are looking for this:
Open drive
Go in Edition > Preferences > General
Uncheck the option, the online storage see the opening of the files
Click OK and restart
Thank you
Abhishek
Maybe you are looking for
-
Multiplication of cross-checking (circular convolution)
Hello To make the circular convolution of vectors, I would like to make: FFT-> multiplication cross-check (W = u * V in MATLAB)-> IFFT for example [1 1 1 1 0 0 0 0] with himself-> [1 2 3 4 3 2 1 0] Is there an easy way to do this multiplication on th
-
Bend contour (assistant vs labview vision)
Hello In the Vision Assistant, if I use 'Analysis of Contour' and click on "Curvature of the computer", there is a table below that show x, position y as the value of the curvature. When I'm in LabVIEW, there is only a table out of the function of cu
-
Hello I created a program that takes a txt file and it analyzes in a list box. I'm using a listbox control so that I can get this line of text. I have a problem when for example this txt file is very large. (140 MB - 1000000 lines) it takes about 40m
-
Windows Defender won't start-get error 0 x 80070006 how he make it back
Windows Defender does not keep error - 0 x 80070006. Don't know about vista and it wont let me reinstal Defender on the former. Help!
-
I couldn't open my email... get a pop up block saying message "check online for a solution and close the program.