USSD code unable?

Similar Questions

• Cannot access USSD Codes 2 G mode!

  Hello world!

  I am using a USSD code to get into the technical side of the phone, so that I can switch to 2 G to save battery power.

  My phone will not let me get off 3 G, there is no option in the settings.

  When I try to use the code * #* #4636 #* #* it does not work! Is - it works on anyones phone,.

  or does anyone know another way to switch networks?

  Try to install Anycut or Anycut2 and create a shortcut to activity "test." AnyCut force closes on Android 2.1 for me, so you can try Anycut2, but read this for a tutorial on how to create shortcuts. That will get you much of the information that you want. There are many activities that are buried in the phone, you can access this way.

• Cannot use USSD codes

  Cannot use the USSD codes after updated to 5.1.1 rom Algeria

  We found the cause of this problem and it will be fixed in a future software update. The version of the software that fixes it will be 23.4.A.1.21X, and we hope to start deployment about a month from now.

• BlackBerry Smartphones USSD code does not work on my BB 9650

  Hi all! All codes USSD (* # 566, * 123 # etc) does not work on my BB 9650. How to solve this problem? I use the grameenphone GSM network in Bangladesh.
  Anyone facing this problem?
  Please answer this... BB admins

  Well, I fixed it! This problem occurs mainly when I turn on data services. Otherwise, it works fine, after that I change the SIM card with another.
  As soon as I turn the "Data Services" on WE, USSD codes do not respond. A call is made by the BB device rather than request a response from the network.
  I don't know WHY. Better not ask you sort

• Kodak esp5250 printer 3520 error code unable to detect the edges of paper

  error code Kodak esp5250 printer 3520 unable to detect the edge of the paper?

  Please see

  http://support.en.kodak.co.uk/app/answers/detail/a_id/25352/kw/3520/selected/true .

• error 0x800106ba code unable to turn windows defender on__

  Windows defender is stopped.  Regardless of what I did to turn the Defender that I keep getting a notice that there is an error and Security Center cannot turn windows Defender

  On Saturday, August 14, 2010 14:36 + 0000, ginny.ellinger wrote:

  Windows defender is stopped.  Regardless of what I did to turn the Defender that I keep getting a notice that there is an error and Security Center cannot turn windows Defender

  You are running Microsoft Security Essentials? If so, it turns out
  Defender off the coast and it's good, not bad. It turns off the Defender because
  It contains the same features.

  There are a few other anti-virus programs that do the same
  thing. If you are not running Microsoft Security Essentials, which
  virus protection do you use?

  Ken Blake

• Web page error code: unable to get the "trimming" of undefined reference property or null

  I use Google chrome on Windows 7 Edition home premium. There is a red icon just to the left of the button cut on the top of the screen. Everytime my mouse passes over it this message arrives... Help, please. Thank you 1 million.

  Hi Nayedene,

  Given that the problem is with Google Chrome you can post your question in the support forums for help.

• error code "IMPOSSIBLE to INSTALL" of Vista sp2 0x8e5e03fa

  I tried to install sp2 once and got the error code "UNABLE to INSTALL" 0x8e5e03fa. I have loaded the "Fixit" program, run the program, and he says that he solved the problems, no problems that I have seen.  I tried to reinstall sp2 and got the same results. I installed SP1 and have checked that start/computer/properties. I have a HP Pavilion dv6000 laptop with a core duo intel CPU T5450 1.66, 1.67.  32-BIT OPERATING SYSTEM. I down loaded the only settlement sp2 version. Now on a side note for the past week, I have not been able to print any pdf files, saved on hard drive, or via a browser, IE8 or Mozilla. If one affect the other?

  Suggestions?

  montyrt,
  Try the points following and post back with the results and the information requested by PA Bear.

  Boot from your PC and let in a minimum of State boot when you run the following tools.

  Disk error checking

  System File Checker

  The system update tool

  Then download the SP2 and run your office installation.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to boot from screen HP INVENT - my head is going to explode

  Hello!

  I have a Slimline s3600t with 1 TB seagate, 4 gigabytes of ram harddrive.

  Less then a month after the warranty expires, normal shutdown.  The next day, turn on and cannot get passed the hp invent screen blue.  The keyboard would not work.  After several conversations with hp cat and internet research, these are things I've done:

  All Unplugged

  All reinstalled

  Tested memory

  Reset the cmos, replace the battery

  Discovered that the only way to go beyond the blue screen is to unplug the computer, remove the battery, hold the power button, put everything back together and turn on the computer.  Then and only then I can hit the boot from the disc.  I use a recovery disk to boot on the windows form.

  I ran the diagnostics of equipment, everything goes very well, except that I get a code BIOHD-6.

  I ran a disk check hard seagate, everything is fine.

  I was told that the code is a question of operating system.  Then I was told that my hard drive was bad.  Ran to my hard drive on another computer.  Booted up without issuees.

  I ran a recovery of the entire system of recovery disks that I've done since the Recovery Manager.  Did not help the problem.

  I ordered a full recovery from hp and used ones, and that did not help the problem.

  Replace a cable between the hard drive and the motherboard.

  Running out of tricks.  Ready to simply start screaming as has happened for two weeks now!

  Thanks for any help and suggestions, you can provide!

  Finally pc holds the repair shop... motherboard (Irvine) needs to be replaced.  Although he lasted exactly one month after the warranty!

  In the meantime, it's what I do if I want to use this computer:

  Unplug it

  remove the cmos battery

  Press the button for 20-30 seconds

  put the battery in

  Plug it in

  turn it on

  Press ESC until I see or hear start

  Let him go through all it's stages

  Choose the disk drive - disk are not necessarily present

  Press enter

  If the above doesn't happen right away I cleaned the battery connection, used the rider, reinstall memory

  It sometimes takes a while before the leak thing

  I don't shut it down or restart unless absolutely necessary.

  Now, before that I am never at this point, I ran every test possible, tried all the tricks possible.  I knew that it wasn't the drive hard because it worked in another computer. I reinstalled everything.  Things removed, replaced, etc. things.  When I could finally do no more, I took it.  I'm going to replace the motherboard when I can.  In the meantime, I will continue starting in the manner above.

  Not like HP at this stage.  First of all, the card mother he would have lasted longer then a year.  We bought HP because we had a good experience.  I hesitate to do it again.  In addition, experience cat, although polite, not very useful.  Various responses and, in spite of the codes, unable to decipher on their end.  I was told that my hard drive was bad.  Ran Seagates trials, met with seagate (very useful), used on another computer... certainly not the hard drive.  Basically HP's attitude was "warranty expired? too bad for you. "  Also, when they said it was a hard drive problem, they said that they would not cover it... After going to seagates website and speak with a representative, I have guaranteed discovered seagate he spend the 1 year contract.

  It is regrettable that I had this experience, but I see I'm not the only one.  Not sure where I'm going here, but I can't afford to replace my computer... or the motherboard also.

  There is one thing, however, that I am grateful... dedicated and it is this Council!  Thank you all for your help and your suggestions.  Which was very appreciated!

• Error code messege

  I get an error code "unable to load GdtanalysisSupport.dll.

  Hello
   
  1. when exactly you get this error message?
  We did some research on this and found that the error message or the dll file is linked to the 3D Solid works CAD product. It seems that the dll file is missing or damaged.
   
  The possible solution for this error is to uninstall and reinstall the software.
   
  Any product manufacturer will have its own procedures for troubleshooting for a particular error message. Before uninstalling the product, we recommend that you contact the software vendor for more information about this error message and the related troubleshooting steps to resolve this problem.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 907 invalid COD

  I am trying to install an application on the blacberry 8900 but I end up getting "907 invalid COD". I scoured the causes common to http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800708/800646/Support... but none of them don't apply to me

  1. built using Netbeans which automatically updates all the attributes. Signed using a verisign code signing certificate.

  2A got the COD file that was signed using the Blackberry signature tool button.

  3 final file size of cod is 686 KB. There are 10 other files inside this parent COD cod.

  4 added the parent COD (686 KB) to the web server

  5. download the file by pointing Blackberry 8900 to the jad (I double/triple/quadraple verified I downloaded good jad)

  6. the jad download properly on the phone. Then I show a dialog by phone asking me to download the 686 K file. I click on the Download"" button.

  7. the blackberry handheld and then stop to think a bit... did something... I don't know what. Does not even start the progress bar indicator (However, I see a call to the Web server asking the parent jad only. No child COD file no is required app server logs).

  8. it is not any problem with the Web server mime types go because the Web server can serve other COD files to other phones (8330 for example) without problem.

  9. I do NOT use WAP browser to download. I use the regular BB browser.

  10. I also tried side loading via the USB cable. But I get the same error... However, with the sideloading, I get a little more information. Whereas the OTA just says "907 invalid COD". If I store the COD and jad on the SD card and try to load it from there, I get "907 invalid cod unable to import zip file. It was weird.

  11. then I try to unzip the parent COD, to take all 10 children COD files and put the 10 files with the file jad on the SD card. Then I try to install from SD card. Now I get "do not find the file 907 invalid cod.

  I'm confused as to what may cause this problem. What we can do to move apart from this problem? Any help would be appreciated. Everyone knows about similar problems? Is the size of the file, is the carrier, it is the phone, it's the browser... I'm lost.

  I was able to understand the reason. Have absolute URLS for RIM-COD-URL-xx instead of parent URLs seem to have solved the problem. For some reason any with the relative URL was causing a problem.

• 907 COD not valid, cannot import ZIP file

  Hello friends,

  I'm getting "907 invalid COD unable to import ZIP file" error when installing my application on the device.

  I have also the zip file I tried cod, but when I unzip. It remains same as prior COD file. (no change)

  any solution for this?

  problem solved now

• Error while installing Win 8 update on Satellite L955-108

  Been trying all day to install the updates of Windows (all 8), but constantly having * error Code: unable to action * 8024200d

  Never had this problem before on Satellite L955-108

  In my opinion, is that Microsoft related question to verify it please this page.
  I hope that you will find answer here.

  Any comment is welcome!

• Problem with features such as * 101 #.

  When Poland and using the prepaid GSM SIM card with a game called operator tried to use codes that show me the remaining minutes etc. None of these codes worked because they seem to be captured by the phone. Examples:

  * 101 # (call) should display the available minutes

  * 121 # (call) my phone number, etc.

  How to solve this problem?

  Thanks in advance!

  Perhaps with the upgrade to ICS, there might be additional USSD codes, but now only some USSDs can operate.

  Further discussions on the subject. Make sure that you are looking for before you create a new discussion because there might already be an ongoing discussion.

  Mark
  Support Forums Manager

• Assistance with yoga pastilles 10

  Hello
  I have the 3 G/wifi of the 10 lenovo yoga tablet version and I really need help for execution of ussd codes.
  I have a 3g data plan and I would like to know how much data is always on offer, now on a phone ordinary I just type * # 140. But with this tablet, there is no transmitter and even with applications downloaded from the google game, he always says
  "voice calls are not available."
  I apreciate any information

  Thank you.

  Hi both,.

  May I suggest to use the Mobile Data tracker in the Android OS itself to see how much data you have used? From there and then calculate backwards to see how you end up with data.