V.1.50 M100 BiosFlash failed ISO

Similar Questions

• Firmware = "efi": Virtual Machine fails ISO image file

  Hello

  I created a new Virtual Machine and choose in the settings under the CD/DVD (IDE) "use ISO image file". Advanced CD/DVD settings: device virtual node, IDE 1:0, CD/DVD (IDE).

  But it does not work. Why?

  

  It looks like the tool of creation of media does the same mistake that we saw several other OS vendors.  Quoting EFI/UEFI firmware in a Machine using VMware virtual:

  The UEFI specification allows some flexibility for sellers to extend the firmware, as well as for the implementation (or omit) optional parts of the UEFI specification.  Sometimes, OS vendors end by unintentionally depending on the characteristics of their development and test systems that are not part of the specification UEFI, thus limiting their operating system compatibility.

  The most common case of what we saw was sellers OS placing the EFI bootloader for the installation media on an ISO9660 or UDF filesystem instead of a partition of El Torito.  The UEFI specification does not require the ability to read an ISO9660 or UDF file system, although some hardware and the virtual platform providers include drivers for filesystems in any case.  Operating systems that are dependent on the presence of a pilot ISO9660 or UDF will severely restrict the platforms on which they can run, and these operating systems will not run in a VMware virtual machine.

  Your latest screenshot shows that the EFI boot files are present on the main filesystem UDF to disk, but your first screenshot shows the boot EFI files are not present in an El Torito boot partition, as requires it the EFI specification.  The drive you have there will depend on the presence of a UDF driver in the firmware of the system, so it will be bootable on some systems, but not all.  It will not be bootable in a VMware virtual machine.

  This should be reported to Microsoft as a defect in his media creation tool.

  In the meantime, there is a pre-built available for download on the Microsoft site, .iso image without using mediacreationtool.exe?  There is a much better chance of success with an .iso file that is downloaded directly.

  See you soon,.

  --

  Darius

• Cannot delete the storage policy to vCloud Director 5.5

  I'm trying to delete the storage policy to vCloud Director 5.5. I did in several vCloud Director organization VDC but stuck with one on the same instance of vCloud Director. I migrated all the VMs, the media and the VAPP model to another storage strategy. I checked in vCenter as there is no VMs who belong to this policy. Always in the vCloud Director, I see 30MB "asked" to this strategy of storage for this VDC.

  Any ideas what I need to check? How can I find what always uses this storage strategy?

  The problem has been resolved. Failed ISO image was only visilble in Administration and media & other only. After it has been removed, we were able to delete the storage policy.

• ISO file failed

  Hi, I use next scheme:

  vCD (1.1.1.1 and 1.1.1.2 = local IP address). My public address: 99.99.99.99/98

  The next NAT port: 443, 80 for http and consoleproxy service.

  When I download the new iso file on my pc I have error: failed to send of http data. In the wireshark log: first connect to 99.99.99.99, next time you connect to 1.1.1.1 (TCP retransmission).

  How do I fix this error? With the help of public address for http and consoleproxy services?

  Solution: Enter the URL with https and insert cert chain (root + ca)

• installed the file ISO of ESXI 5.5.0 of trialware on a PC at home that has a memory of 8meg, installed correctly, then on reboot I get 'no boot disk was detected or the drive failed', I'm boot from the hard disk, any ideas?

  installed the file ISO of ESXI 5.5.0 of trialware on a PC at home that has a memory of 8meg, installed correctly, then on reboot I get 'no boot disk was detected or the drive failed', I'm boot from the hard disk, any ideas?

  Welcome to the community,

  Please take a look at for example http://wp.secretnest.info/?p=697 to know if this is the problem you are facing.

  André

• The PXE using HP on ISO measure fails to start with GROUP

  I have successfully configured a PXE boot using the VMware ESXi 4.1 Update 1 ISO version.  There is a complicated configuration that must be done to make it work (essentially described here: http://www.jayakumar.org/esx/pxe-boot-vmware-esxi-4-1-and-manual-install/):

  -Create a folder in which copy the source files for the installation ISO.

  -Copy the file "imagedd.bz2" on a Linux machine.

  -mkdir Pei usr/lib/vmware/Installer /.

  -mv imagedd.bz2 usr/lib/vmware/installer/VMware-VMvisor-big-4.1.0-348481-x86_64.dd.bz2

  -tar cvzf image.tgz usr /.

  -Copy the file "image.tgz" in the location of the soure file.

  -Place a copy of the file "pxelinux.0" (from version 3.0 of syslinux) in the location of the source file

  -Create a folder called "pxelinux.cfg; Copy the isolinux.cfg file in the pxelinux.cfg file and rename it to 'default '; Edit the file 'default' by adding '-image.tgz ' to the line append.

  If I do the same exact process using ISO custom of HP, the PXE install fails with a GROUP shown here:

  

  Anyone know what could be the problem?  I tried the version from the download site of VMware as well as directly from HP.

  I just had the same GROUP while trying to start an image constructed from HP 4.1_U1_Apr_2011_ESXi_HD_USB_SDImgeInstlr_Z7550_00096.iso

  In my case the problem is proved to be bad tar format image.tgz

  Student vmkernel.log I found visorfstar: entrance to complain about wrong image file.

  When I tried to convert uncompressed image.tar vmtar vgz reported: invalid tar: 'ustar'

  so I 'reconditioned' image.tgz with the utility tar anchored in esxi console and it worked finally.

• error "Invalid operation name failed" erase usb (tails.iso)

  Hello

  New user of the community, old mac user.

  Were trying to erase these two disks USB bootable "residue" I did and I get the same error listed above 'invalid name - operation failed' for both, tried in utility disk and with command terminal, terminal error said the drive was too small.

  Not 100% exactly sure what code I used to produce the error message said (do not remember so always copy paste sites) something along the lines of:

  diskutil eraseDisk HFS disk2 + 'name '.

  Any help much appreciated.

  OK Solution!

  Someone else with the same error message should try this, or with that specific tails lead question.

  https://tails.BOUM.org/doc/First_Steps/reset/Mac/index.en.html

  Typical, whether on their site, searched for centuries. Search engines win every time on internal Web site searches.

• Failed to restore WT8-a-103 - must earn 8.1 SmScm Touch w/H & S iso 2013

  Hello
  I tried to reinstall my WT8-a-103, but the owner deletet before the backup section. So I used a normal iso 8.1 victory.
  Now touchscreen doesn't work anymore and I can't find the drivers to work. The same with GPS, camera...
  Where can I get the ISO or any other backup media? Of course, I have the original serial number.
  Please help me
  Markus

  Post edited by: m.sommer

  Yes, da leider no one geantwortet hat, die of ich habe Toshiba Recovery Disc as 35 which und alles wieder correctly works!

• Satellite M100 recovery disk failing after loading ramdisk image

  Hello world

  I have a Satellite M100 (bought mid-2006), 512 MB RAM, 60 GB HDD, Intel CPU T2050.

  I decided to have a cleaning and use the restore disc to return the laptop to factory settings, and then reinstall only what I really wanted.
  I had this done yesterday, I had forgotten something, then he ran again about 4 hours later.
  The first time that the restore worked, now it reboots once the progress bar reaches full when he says "Loading RAMDISK Image".
  After the progress bar reaches full, the mouse pointer appears for a few seconds then restart the computer.

  Nothing has changed with the hardware or BIOS, and what is on the HD should not have any effect because I am booting from the DVD.
  Can someone please help? I am at a loss to explain what happened in this interval of 4 hours.

  Thank you

  Hello!

  I agree with Akuma.
  Sometimes I can read here on this problem and I know you should only remove the partition on the HARD disk. Therefore, you can also use a Windows XP CD from Microsoft or the FDISK utility.

  After you delete all the partition, you should be able to run the recovery disk.
  Check it!

  Good bye

• Downloaded SP3 of XP on a USB to update XP computer without internet connection, computer, failed to read the iso file?

  I downloaded the SP3 of XP on a USB to update an XP computer that is not connected to the internet.  The computer cannot read the file, any suggestions on a download that will help you... the file is a. ISO file

  Hello

  Install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  You can ignore the text which says that it is for network installations and also ignore the text informing Windows/Microsoft Update If a single update of a PC.

  It is an executable file (.exe) that must just run and install, i.e., it is not an iso file that will be used to create a CD which included the executable.

  Just like the iso file, it can be saved to a Flash DRIVE on another PC before running on the PC to update.

  So try and get up-to-date with the Windows updates.

  Tricky

• OMIVV 3.0 & Dell R630 Bare Metal deployment error: apply ISO has failed, the Exception occurred * servicetag *.

  Hello

  We try to use OMIVV on a new deployment of R630 Dell servers with dual deployment ESXi 6 SD card.

  After deployment is running the server restarts but does start the ISO, iDRAC IP is in another network to OMIVV but there is no restrictions on communications between network iDRAC and the OMIVV box.

  Looking at the firewall no attempt is made to connect to the iDRAC network file sharing, but there is a small amount of comms to OMIVV box.

  No traffic is blocked.

  This doesn't seem to work at all and the information about why a failure has produced are non-existent.

  Everyone sees these questions?

  Thank you

  Please make sure that the IP OMIVV eth0 network address is available to the iDRAC network IP address and try to deploy the hypervisor.

• Failed to verify the product key for the download of the ISO.

  Good day to all, I am unable to check my product key for ISO download to https://www.microsoft.com/en-au/software-download/windows7.

  

  My windows is already activated, but I would change from 32-bit to 64-bit (my PC supports this) so I would like to download an ISO file to reinstall.

  I hope you all can help out me. Thank you and have a great day!

  

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• Initialization failed: press a button to try again... when installing ESXi ISO

  After a repair of an already open a question problem, a new question was raised.  I open another question because this problem is new, and I thought that a new question must be requested in this regard.

  Following the instructions of this question, I have re-recognized my blade twice.  Looking at the KVM, I have not seen a no boot device message, which was to be expected.  I went to re - install ESXi 5.5 (which was already installed on the SD card before the open-ended question) and I am now met with the following message is displayed:

  isolinux: disk error 20, AX = 422D, reader EF

  I rebooted several times the blade to re - try unsuccessfully to installation.  I even went back to an ISO of 5.1 ESXi, who gave the best results.

  The ISOs I use are UCS VMware ISOs downloaded directly from VMware.

  Please check the question as answered future users faced with the same question

  -Kenny

• Fails to start the iso file of MAC OS in my computer 11

  I get the error when booting from the ISO file in my computer 11.

  VMware does not support the operation of Mac OS X in VMware Player/workstation!  Also, legally virtualisables versions of OS X running in a Virtual Machine cannot be done when done in the hardware Apple brand, but when done while running under OS X and for that you need VMware Fusion not VMware Player/position to work, otherwise you're violate Apple's SLA for this product.  So any help can you provided for OS X in this use of the scenarios that it would violate the community VMware operating conditions to do.

• Vcenter/VSphere/ESX 5.0.0 question: could not download /opt/vmware/www/build/Tenacity.iso for the san-core8 data store. == > Build fails

  I built this different ways now, and I still get this same exact error. I spin as 'Admin' and I have so any available privilege.

  There are no special characters in the password, I tried this file generation and he got away on my computer than this (v-soft bootable with interface).

  Please help me get to the next step, I'm stuck here.

  Everything seems fine until:

  09/10/2013 18:00:25 [info] validation available disk space...

  09/10/2013 18:00:25 [info] prepares the operating system installation files.

  09/10/2013 18:00:25 [info] looking for /opt/vmware/www/ISV/ISO/CentOS-6.4-x86_64-bin-DVD1.iso

  09/10/2013 18:00:25 [info] Validating md5 checksum for /opt/vmware/www/ISV/ISO/CentOS-6.4-x86_64-bin-DVD1.iso (may take a few minutes)

  09/10/2013 18:01:15 [info] verification of repositories of request for the installation of the packages packet...

  09/10/2013 18:01:16 [info] creating package repositories...

  09/10/2013 18:01:16 [info] create the virtual machine model.

  09/10/2013 18:01:17 [info] VM carrying from the Studio to the host configuration. This may take a few minutes...

  09/10/2013 18:02:20 [warn] cannot download /opt/vmware/www/build/Tenacity.1/Tenacity.1_provstart.iso for the s-core9 data store.

  09/10/2013 18:02:20 [warn]

  %3 %7% 11% 15% 19% 23% 26% 30% 34% 38% 42 failure: (22, ' the requested URL returned error: 401')

  09/10/2013 18:02:20 [error] met a unrecoverable build error!

  I am able to use this model for Centos on my computer actually install and build a paralytic with centos on that - unfortunately I do a

  hacks to make it work properly and I cannot get it to install other real applications (perhaps there is a new version for workstation 10?)

  So I went to vsphere, and I KNOW my generation model is ok, at least to get the installed operating system.

  What information can I give you or what can I try, thanks!

  Is it really "sort of" loading ie 42% or which is a total failure?

  OK, I have a build that WORKED, now I see what you mean about watching build/deploy the VM guest.

  Here is the solution to my problem: our vcenter uses names with spaces, we also use the domain names for our connections. In addition, each admin password was 'special characters', that I've debugged meticulously by ALL of them and much more. Basically, it did not matter that I have "URL" code things, used new tools or edited different scripts to encode things one way or another.

  What finally gave us successes was to go to a 'clean' Vcenter implementation that

  (a) use/did not require a domain name (not / credentials)

  (b) all had the "BACK original' legal names, IE no spaces, no special characters, etc..

  (c) the passwords contained NO "special characters".

  (because I changed this way, 'URL' encoding didn't work, tried it)

  Moral of the story: building a new, simply configured Vcenter or get one and use it.

  (Note: I even downloaded a new ovftool and tried every way that I could but it did not success)