V Cast opens the registration page to USB connection. Annoying to say the least
Is there a way to avoid the V Cast registration page opens whenever I connect the USB cable to my PC?
Yes, simply right click on the motorola icon near the clock and to launch the title choose 'nothing'
Tags: Motorola Phones
Similar Questions
-
I plugged my USB Modem to the computer, it's MMX352G micromax modem. After the internet connection all browsers open the pages of the World Bank, but in the task bar sign network is to have a Red Cross and when I go over it, it says not connected, but I can always use internet in my browsers. Why? It causes an adverse effect on my computer.
Hi Akash,
Welcome to the Microsoft community. According to the description of the bar icon problem tasks of the network have a red x, but you can still access the internet. Provide the following information:
· Did you do changes on the computer before the show?
· You use a third-party security software?
I suggest you follow these methods.
Method 1: Follow these steps:
Step 1: Start the computer in safe mode with network and check if the problem persists.
Startup options (including safe mode)
Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.
Method 2: Follow the steps in the article.
Windows wireless and wired network connection problems
You can read this article for more information:
How can I troubleshoot network card?
I hope this helps. Let us know if you need more assistance.
-
Open the report classic on average page / registration
Hello
I'm under Apex 5.0.3 on Oracle 12 c.
I have a report classic that will always return 100 records with record 51 being that the user is likely to be more interested. I would like so open the report view this intermediate page. Before the Apex 5 I used $a_report but this code no longer works, and in all cases, I have to use a method of support.
Is there a way to do this, perhaps using dynamic Actions, JQuery or another method?
Thank you
Chris
phillips_chris wrote:
I'm under Apex 5.0.3 on Oracle 12 c.
I have a report classic that will always return 100 records with record 51 being that the user is likely to be more interested. I would like so open the report view this intermediate page. Before the Apex 5 I used $a_report but this code no longer works, and in all cases, I have to use a method of support.
Is there a way to do this, perhaps using dynamic Actions, JQuery or another method?
For reasons, I do not understand there is no way documented and supported to customize the reports beyond paging parameters available in report attributes and the very limited support for editing report models.
The following work APEX 5.0 using the theme universal but is far from be supported, elegant and efficient. Add this script to report property Footer area:
This awkward approach is necessary because paging is driven using the internal region ID, and the foot of the region is one of the few places that the substitution #REGION_ID # container string these are accessible during execution to obtain the desired value.
Add a dynamic loading of page action to call the function when the page is loaded (it is possible to run the code of paging directly from the foot of the region, but I'd rather have the DA visible to indicate that there is something unusual is happening on the page...).
Event: Loading the page
Action: Run the JavaScript Code
Code
// Call function defined in region XXX footer due to dependency on REGION_ID substitution string area51();
-
Hung up on the bad test page port (LPT1) and tail blocks to HP C4200 w/USB connect... will not erase
Hanging test page to the wrong port (LPT1) and tail blocks to HP C4200 w/USB connect... don't delete.__How cancel? Pls help. TKS Ron Moore
Ideas page: hanging in wrongly Test prt (LPT1) and tail blocks to HP C4280 w/USB connect... will not erase.
How to cancel? Pls help. TKS, Ron Moore
Hi Ron,
1. how many printers is connected to the computer?
2. did you of recent changes on the computer?
3. what happens when you try to change printer (LPT1) port
Method 1
See the link below and run them the fixit tool available, check if it helps.
Problems printing and printing errors
http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox
Method 2
If the previous step fails, then I suggest that you restart the computer the print spooler service and check if it works.
A print spooler is a system service that temporarily stores the disk printing hard or in memory until the printer is ready to print.
To change or restart the print spooler service
You must be logged on as administrator to perform these steps.
(a) open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
(b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(c) right click on the print spooler service, and then click Properties.
(d) under the tab general , next to Startup type, make sure thatAutomatic is selected.
(e) if the service is not already running, under Service status, click pie Sand then clickOK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
capture server is up and running, but cannot open the login page
Hi all
My capture server is running, but I'm unable to open the login page of the capture server error 404: page not found, please notify.
capture_server1.diagnostic.log
[08 - 2015-07T 14: 46:06.110 + 05:30] [capture_server1] [NOTIFICATION] [] [oracle.mds] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: OracleSystemUser] [ecid: 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002, 0] [APP: wsm - am] PManager instance is created without support multitenancy as indicator "oracle.multitenant.enabled" of the JVM is not set to enable multitenancy support.
[08 - 2015-07T 14: 46:09.357 + 05:30] [capture_server1] [NOTIFICATION] [] [oracle.wsm.policymanager.web.PolicyManagerValidator] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: OracleSystemUser] [ecid: 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002, 0] [APP: wsm - h] trying upgrade repository to the latest version if an upgrade is required.
[08 - 2015-07T 14: 46:28.495 + 05:30] [capture_server1] [NOTIFICATION] [] [oracle.wsm.policymanager.web.PolicyManagerValidator] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: OracleSystemUser] [ecid: 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002, 0] [APP: wsm - h] update of the repository is not necessary.
[08 - 2015-07T 14: 46:53.725 + 05:30] [capture_server1] [NOTIFICATION] [CAPTURE-10000] [oracle.odc.systemmanager.SystemManagerSessionBean] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: anonymous] [ecid: 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002, 0] [APP: capture] initializing Capture
[08 - 2015-07T 14: 46:59.086 + 05:30] [capture_server1] [NOTIFICATION] [] [oracle.odc.mbeans.ODCSystemMBeanImpl] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: anonymous] [ecid: 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002, 0] [APP: capture] record Capture MBeans
[08 - 2015-07T 14: 46:59.107 + 05:30] [capture_server1] [NOTIFICATION] [] [oracle.odc.mbeans.ODCSystemMBeanImpl] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: anonymous] [ecid: 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002, 0] [APP: capture] have located the server, create the bean
[08 - 2015-07T 14: 46:59.131 + 05:30] [capture_server1] [NOTIFICATION] [] [oracle.odc.mbeans.ODCSystemMBeanImpl] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: anonymous] [ecid: 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002, 0] [APP: capture] oracle.capture:EMTargetType = oracle_oddc, name = Config, type is config, Application = capture
[08 - 2015-07T 14: 46:59.136 + 05:30] [capture_server1] [NOTIFICATION] [] [oracle.odc.mbeans.ODCSystemMBeanImpl] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: anonymous] [ecid: 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002, 0] [APP: capture] oracle.capture:EMTargetType = oracle_oddc, name = GeneralInformation, type is geninf, Application = capture
[08 - 2015-07T 14: 46:59.139 + 05:30] [capture_server1] [NOTIFICATION] [] [oracle.odc.mbeans.ODCSystemMBeanImpl] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: anonymous] [ecid: 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002, 0] [APP: capture] capture MBean complete record
[08 - 2015-07T 14: 47:01.197 + 05:30] [capture_server1] [NOTIFICATION] [] [oracle.mds] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [ecid: 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002, 0] [APP: capture] PManager instance is created without support multitenancy as indicator "oracle.multitenant.enabled" of the JVM is not set to enable multitenancy support.
[08 - 2015-07T 14: 47:10.772 + 05:30] [capture_server1] [NOTIFICATION] [] [oracle.adf.mbean.share.connection.ConnectionsMXBeanImpl] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [ecid: 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002, 0] [APP: capture] connection Runtime MBean registration
[08 - 2015-07T 14: 47:11.908 + 05:30] [capture_server1] [NOTIFICATION] [] [oracle.adf.mbean.share.connection.ADFConnectionLifeCycleCallBack] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [ecid: 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002, 0] [APP: capture] recorded the ADF MBean connection for the capture of the application
[08 - 2015-07T 14: 47:18.947 + 05:30] [capture_server1] [NOTIFICATION] [] [oracle.adf.mbean.share.config.ADFConfigLifeCycleCallBack] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [ecid: 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002, 0] [APP: capture] ADF config mbean registered for the capture.
[08 - 2015-07T 14: 47:20.007 + 05:30] [capture_server1] [TRACK: 32] [] [oracle.adf.share.diagnostics.versions] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [ecid: 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002, 0] [APP: capture] [SRC_CLASS: oracle.adf.share.dfw.dump.impl.AdfDiagnosticsJarsVersionDumpImpl] [SRC_METHOD: dumpVersionInfo] version jars discharge path: /u02/Oracle/Middleware/user_projects/domains/WlsDevDomain/servers/capture_server1/logs/capture-Versions.csv
[08 - 2015-07T 14: 47:22.640 + 05:30] [capture_server1] [WARNING] [ADF_FACES-30130] [oracle.adfinternal.view.faces.partition.FeatureUtils] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [ecid: 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002, 0] [APP: capture] without taking into account the dependence of the feature on the function "AdfDvtCommon". There is no such feature.
[08 - 2015-07T 14: 47:24.321 + 05:30] [capture_server1] [WARNING] [] [oracle.odc.mbeans.ODCSystemMBeanImpl] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [ecid: 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002, 0] [APP: capture] javax.management.InstanceNotFoundException: oracle.capture:type = config
[08 - 2015-07T 14: 47:24.515 + 05:30] [capture_server1] [NOTIFICATION] [] [oracle.mds] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [ecid: 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002, 0] [APP: capture] MBean: oracle.mds.lcm:name = MDSAppRuntime, type is MDSAppRuntime, Application = capture removed
[08 - 2015-07T 14: 47:24.518 + 05:30] [capture_server1] [NOTIFICATION] [] [oracle.adf.share.config.ADFConfigFactory] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [ecid: 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002, 0] [APP: capture] implementation of appellate ADF Config: class oracle.adf.share.config.ADFConfigImpl.releaseResources)
capture_server1.log
< 1438939044366 > < BEA-149060 > < empty.jar capture Module of application successfully increased from STATE_ADMIN to STATE_PREPARED on the capture_server1 server. >
# < 7 August 2015 14:47:24 IST > < error > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002 > < 1438939044373 > < BEA-149231 > < cannot create the activation state to true for the "capture" of demand.
weblogic.application.ModuleException: [HTTP:101216] Servlet: "jersey" has failed by preloading at startup in a Web application: "/ dc-customer.
java.lang.NoSuchMethodError: org.objectweb.asm.ClassReader.accept (Lorg/objectweb/asm/ClassVisitor; (I) V
at com.sun.jersey.spi.scanning.AnnotationScannerListener.onProcess(AnnotationScannerListener.java:133)
at com.sun.jersey.core.spi.scanning.JarFileScanner.scan(JarFileScanner.java:97)
to com.sun.jersey.spi.scanning.servlet.WebAppResourcesScanner$ 1.f(WebAppResourcesScanner.java:94)
at com.sun.jersey.core.util.Closing.f(Closing.java:71)
at com.sun.jersey.spi.scanning.servlet.WebAppResourcesScanner.scan(WebAppResourcesScanner.java:92)
at com.sun.jersey.spi.scanning.servlet.WebAppResourcesScanner.scan(WebAppResourcesScanner.java:79)
at com.sun.jersey.api.core.ScanningResourceConfig.init(ScanningResourceConfig.java:80)
at com.sun.jersey.api.core.servlet.WebAppResourceConfig.init(WebAppResourceConfig.java:102)
to com.sun.jersey.api.core.servlet.WebAppResourceConfig. < init > (WebAppResourceConfig.java:89)
to com.sun.jersey.api.core.servlet.WebAppResourceConfig. < init > (WebAppResourceConfig.java:74)
at com.sun.jersey.spi.container.servlet.WebComponent.getWebAppResourceConfig(WebComponent.java:672)
at com.sun.jersey.spi.container.servlet.ServletContainer.getDefaultResourceConfig(ServletContainer.java:414)
at com.sun.jersey.spi.container.servlet.ServletContainer.getDefaultResourceConfig(ServletContainer.java:581)
at com.sun.jersey.spi.container.servlet.WebServletConfig.getDefaultResourceConfig(WebServletConfig.java:87)
at com.sun.jersey.spi.container.servlet.WebComponent.createResourceConfig(WebComponent.java:703)
at com.sun.jersey.spi.container.servlet.WebComponent.createResourceConfig(WebComponent.java:678)
at com.sun.jersey.spi.container.servlet.WebComponent.init(WebComponent.java:203)
at com.sun.jersey.spi.container.servlet.ServletContainer.init(ServletContainer.java:373)
at com.sun.jersey.spi.container.servlet.ServletContainer.init(ServletContainer.java:556)
at javax.servlet.GenericServlet.init(GenericServlet.java:241)
to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: java.lang.NoSuchMethodError: org.objectweb.asm.ClassReader.accept (Lorg/objectweb/asm/ClassVisitor; (I) V
at com.sun.jersey.spi.scanning.AnnotationScannerListener.onProcess(AnnotationScannerListener.java:133)
at com.sun.jersey.core.spi.scanning.JarFileScanner.scan(JarFileScanner.java:97)
to com.sun.jersey.spi.scanning.servlet.WebAppResourcesScanner$ 1.f(WebAppResourcesScanner.java:94)
at com.sun.jersey.core.util.Closing.f(Closing.java:71)
at com.sun.jersey.spi.scanning.servlet.WebAppResourcesScanner.scan(WebAppResourcesScanner.java:92)
at com.sun.jersey.spi.scanning.servlet.WebAppResourcesScanner.scan(WebAppResourcesScanner.java:79)
at com.sun.jersey.api.core.ScanningResourceConfig.init(ScanningResourceConfig.java:80)
at com.sun.jersey.api.core.servlet.WebAppResourceConfig.init(WebAppResourceConfig.java:102)
to com.sun.jersey.api.core.servlet.WebAppResourceConfig. < init > (WebAppResourceConfig.java:89)
to com.sun.jersey.api.core.servlet.WebAppResourceConfig. < init > (WebAppResourceConfig.java:74)
at com.sun.jersey.spi.container.servlet.WebComponent.getWebAppResourceConfig(WebComponent.java:672)
at com.sun.jersey.spi.container.servlet.ServletContainer.getDefaultResourceConfig(ServletContainer.java:414)
at com.sun.jersey.spi.container.servlet.ServletContainer.getDefaultResourceConfig(ServletContainer.java:581)
at com.sun.jersey.spi.container.servlet.WebServletConfig.getDefaultResourceConfig(WebServletConfig.java:87)
at com.sun.jersey.spi.container.servlet.WebComponent.createResourceConfig(WebComponent.java:703)
at com.sun.jersey.spi.container.servlet.WebComponent.createResourceConfig(WebComponent.java:678)
at com.sun.jersey.spi.container.servlet.WebComponent.init(WebComponent.java:203)
at com.sun.jersey.spi.container.servlet.ServletContainer.init(ServletContainer.java:373)
at com.sun.jersey.spi.container.servlet.ServletContainer.init(ServletContainer.java:556)
at javax.servlet.GenericServlet.init(GenericServlet.java:241)
to weblogic.servlet.internal.StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
to weblogic.servlet.internal.StubLifecycleHelper. < init > (StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
# < 7 August 2015 14:47:24 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002 > < 1438939044382 > < BEA-149059 > < Module/dc-capture application help switches STATE_PREPARED to STATE_NEW on the capture_server1 server. >
# < 7 August 2015 14:47:24 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002 > < 1438939044387 > < BEA-149060 > </dc-help capture Module of application successfully spent at STATE_NEW STATE_PREPARED on the capture_server1 server. >
# < 7 August 2015 14:47:24 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002 > < 1438939044388 > < BEA-149059 > < Module/dc-capture application console switches from STATE_PREPARED to STATE_NEW on the capture_server1 server. >
# < 7 August 2015 14:47:24 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002 > < 1438939044390 > < BEA-149060 > </dc-console capture Module of application successfully spent at STATE_NEW STATE_PREPARED on the capture_server1 server. >
# < 7 August 2015 14:47:24 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002 > < 1438939044391 > < BEA-149059 > </dc-capture application client Module switches from STATE_PREPARED to STATE_NEW on the capture_server1 server. >
# < 7 August 2015 14:47:24 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002 > < 1438939044394 > < BEA-149060 > </dc-customer capture Module of application successfully spent at STATE_NEW STATE_PREPARED on the capture_server1 server. >
# < 7 August 2015 14:47:24 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002 > < 1438939044395 > < BEA-149059 > < Module oddc-Core capture application switches from STATE_PREPARED to STATE_NEW on the capture_server1 server. >
# < 7 August 2015 14:47:24 IST > < Info > < EclipseLink > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002 > < 1438939044486 > < BEA-2005000 > < 14:47:24.486 2015-08-07 - unplug ServerSession (165266245) - connection (364087240)->
# < 7 August 2015 14:47:24 IST > < opinion > < EclipseLink > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002 > < 1438939044488 > < BEA-2005000 > < 2015 - 08 - 07 14:47:24.488 - ServerSession (165266245)--capturefile:/u02/Oracle/Middleware/user_projects/domains/WlsDevDomain/servers/capture_server1/tmp/_WL_user/capture/1336fw/oddc-core.jar_capture-ds successful logout >)
# < 7 August 2015 14:47:24 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002 > < 1438939044495 > < BEA-149060 > < Module oddc-Core of the application captures successfully spent at STATE_NEW STATE_PREPARED on the capture_server1 server. >
# < 7 August 2015 14:47:24 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002 > < 1438939044496 > < BEA-149059 > < APP-INF/lib/oracle.ucm.ridc-11.1.1.jar capture application Module switches from STATE_PREPARED to STATE_NEW on the capture_server1 server. >
# < 7 August 2015 14:47:24 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002 > < 1438939044498 > < BEA-149060 > < APP-INF/lib/oracle.ucm.ridc-11.1.1.jar capture Module of application successfully spent at STATE_NEW STATE_PREPARED on the capture_server1 server. >
# < 7 August 2015 14:47:24 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002 > < 1438939044499 > < BEA-149059 > < Module empty.jar to capture application switches from STATE_PREPARED to STATE_NEW on the capture_server1 server. >
# < 7 August 2015 14:47:24 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002 > < 1438939044500 > < BEA-149060 > < empty.jar capture Module of application successfully spent at STATE_NEW STATE_PREPARED on the capture_server1 server. >
# < 7 August 2015 14:47:24 IST > < Info > < Diagnostics > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939044585 > < BEA-320000 > < Diagnostics of the subsystem initializes on the server capture_server1. >
# < 7 August 2015 14:47:24 IST > < Info > < Store > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939044604 > < BEA-280008 > < open the persistent store of file 'WLS_DIAGNOSTICS' for recovery: directory = / requestedWritePolicy u02/Oracle/Middleware/user_projects/domains/WlsDevDomain/servers/capture_server1/data/store/diagnosis = "Disabled" fileLockingEnabled = true driver = "wlfileio3." >
# < 7 August 2015 14:47:24 IST > < Info > < Store > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939044617 > < BEA-280103 > < storage of persistent files "WLS_DIAGNOSTICS" puts in cache in weblogic.store.io.file.direct.FileMapping [granularity = 8192 io mapped =]. >
# < 7 August 2015 14:47:24 IST > < Info > < Store > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939044744 > < BEA-280009 > < storing files persistent "WLS_DIAGNOSTICS" (9ca91052-8116-4a5a-9e36-2537c920bf8a) has been opened: blockSize = 512 actualWritePolicy = "Disabled(single-handle-non-direct)" explicitIOEnforced = false documents = 53. " >
# < 7 August 2015 14:47:24 IST > < opinion > < Log Management > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939044813 > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. >
# < 7 August 2015 14:47:25 IST > < Info > < Diagnostics > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045148 > < BEA-320077 > < Initialized > Service of diagnosis accessor.
# < 7 August 2015 14:47:25 IST > < Info > < Diagnostics > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045233 > < BEA-320117 > < the harvester is disabled because there is no specified configured harvestable type. >
# < 7 August 2015 14:47:25 IST > < Info > < Diagnostics > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045239 > < BEA-320119 > < the harvester is now in an inactive state. >
# < 7 August 2015 14:47:25 IST > < opinion > < WebLogicServer > < webcdev2v.industowers.com > < capture_server1 > < principal > < < WLS Kernel > > <><>< 1438939045327 > < BEA-000365 > < server status changed to ADMIN >
# < 7 August 2015 14:47:25 IST > < opinion > < WebLogicServer > < webcdev2v.industowers.com > < capture_server1 > < principal > < < WLS Kernel > > <><>< 1438939045491 > < BEA-000365 > < Server State has changed for RESUMING >
# < 7 August 2015 14:47:25 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045895 > < BEA-149059 > < dms.war request DMS Module [Version = 11.1.1.1.0] toggle to STATE_ACTIVE STATE_ADMIN on the capture_server1 server. >
# < 7 August 2015 14:47:25 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045896 > < BEA-149060 > < dms.war DMS [Version = 11.1.1.1.0] request Module successfully happening to STATE_ACTIVE STATE_ADMIN on the capture_server1 server. >
# < 7 August 2015 14:47:25 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045906 > < BEA-149059 > < inspection.wsil STATE_ADMIN request Module, wsil-wls is transition to the STATE_ACTIVE on the capture_server1 server. >
# < 7 August 2015 14:47:25 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045907 > < BEA-149060 > < inspection.wsil request Module wsil-wls successfully moved from STATE_ADMIN to STATE_ACTIVE on the capture_server1 server. >
# < 7 August 2015 14:47:25 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045913 > < BEA-149059 > < Module application wsm - MP weblogic.xml.registry.XMLModule is STATE_ADMIN of STATE_ACTIVE transition on the capture_server1 server. >
# < 7 August 2015 14:47:25 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045914 > < BEA-149060 > < weblogic.xml.registry.XMLModule request Module wsm - am successfully spent at STATE_ACTIVE STATE_ADMIN on the capture_server1 server. >
# < 7 August 2015 14:47:25 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045915 > < BEA-149059 > < Module wsm-pmserver - application wsm - MP wls.jar is STATE_ADMIN of STATE_ACTIVE transition on the capture_server1 server. >
# < 7 August 2015 14:47:25 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045916 > < BEA-149060 > < wsm-pmserver - wls.jar request Module wsm - am successfully spent at STATE_ACTIVE STATE_ADMIN on the capture_server1 server. >
# < 7 August 2015 14:47:25 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045917 > < BEA-149059 > < Module wsm - am wsm - MP application is STATE_ADMIN of STATE_ACTIVE transition on the capture_server1 server. >
# < 7 August 2015 14:47:25 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045918 > < BEA-149060 > < wsm - am request Module wsm - am successfully spent at STATE_ACTIVE STATE_ADMIN on the capture_server1 server. >
# < 7 August 2015 14:47:25 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045920 > < BEA-149059 > < Module diagnosis of application wsm - MP is transition STATE_ADMIN to the STATE_ACTIVE on the capture_server1 server. >
# < 7 August 2015 14:47:25 IST > < Info > < hats > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045921 > < BEA-149060 > < diagnosis Module from wsm - am successfully request from STATE_ADMIN to STATE_ACTIVE on the capture_server1 server. >
# < 7 August 2015 14:47:25 IST > < Info > < Server > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045965 > < BEA-002610 > < dynamic listener initialized Service >.
# < 7 August 2015 14:47:25 IST > < opinion > < Server > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045969 > < BEA-002613 > < Channel "[1] by default ' is now listening on 127.0.0.1:16400 for iiop protocols t3, ldap, snmp, http. >
# < 7 August 2015 14:47:25 IST > < opinion > < Server > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045971 > < BEA-002613 > < Channel "Default" is now listening on 10.240.22.207:16400 for iiop, t3, ldap protocols snmp, http. >
# < 7 August 2015 14:47:25 IST > < opinion > < WebLogicServer > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939045972 > < BEA-000332 > < started WebLogic Server managed by "capture_server1" for the domain "WlsDevDomain" running in development Mode >
# < 7 August 2015 14:47:26 IST > < Info > < Server > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939046019 > < BEA-002635 > < "AdminServer" server connected to that server. >
# < 7 August 2015 14:47:26 IST > < Info > < JMX > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939046233 > < BEA-149511 > < established JMX connectivity with the Administration Server AdminServer to service:jmx:t3://10.240.22.207:7001/jndi/weblogic.management.mbeanservers.domainruntime. >
# < 7 August 2015 14:47:30 IST > < Info > < J2EE > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [pending]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939050453 > < BEA-160151 > < Registered Library Extension-Name: bea_wls_async_response (JAR). >
# < 7 August 2015 14:47:31 IST > < Info > < WebService > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [pending]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1438939051615 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceHttps for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
# < 7 August 2015 14:47:32 IST > < Info > < WebService > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [pending]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1438939052442 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceJms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
# < 7 August 2015 14:47:32 IST > < Info > < WebService > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [pending]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1438939052531 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseService for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
# < 7 August 2015 14:47:32 IST > < Info > < WebService > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [pending]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1438939052635 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Jms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
# < 7 August 2015 14:47:32 IST > < Info > < WebService > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [pending]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1438939052808 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12 for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
# < 7 August 2015 14:47:32 IST > < Info > < WebService > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [pending]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1438939052887 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Https for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
# < 7 August 2015 14:47:46 IST > < Info > < JMS > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939066600 > < BEA-040010 > < JMSServer 'CaptureJmsServer1' configured no session pools. >
# < 7 August 2015 14:47:46 IST > < Info > < JMS > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939066602 > < BEA-040109 > < JMSServer "CaptureJmsServer1" is started. >
# < 7 August 2015 14:47:46 IST > < opinion > < WebLogicServer > < webcdev2v.industowers.com > < capture_server1 > < principal > < < WLS Kernel > > <><>< 1438939066626 > < BEA-000365 > < Server State has changed in the RACE >
# < 7 August 2015 14:47:46 IST > < opinion > < WebLogicServer > < webcdev2v.industowers.com > < capture_server1 > < principal > < < WLS Kernel > > <><>< 1438939066629 > < BEA-000360 > < server started operation >
# < 7 August 2015 14:47:47 IST > < Info > < EJB > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1438939067595 > < BEA-010060 > < The Message - Driven EJB: DocumentConversionProcessorBean a connected/reconnected to the JMS destination: capture/jms-documentconversionprocessor. >
# < 7 August 2015 14:47:47 IST > < Info > < EJB > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [pending]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1438939067597 > < BEA-010060 > < The Message - Driven EJB: ImportProcessorBean a connected/reconnected to the JMS destination: jms/capture-batchinput-queue. >
# < 7 August 2015 14:47:47 IST > < Info > < EJB > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [pending]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1438939067623 > < BEA-010060 > < The Message - Driven EJB: CommitProcessorBean a connected/reconnected to the JMS destination: capture/jms-commitprocessor. >
# < 7 August 2015 14:47:47 IST > < Info > < EJB > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [pending]: '4' for queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1438939067623 > < BEA-010060 > < The Message - Driven EJB: RecognitionProcessorBean a connected/reconnected to the JMS destination: capture/jms-recognitionprocessor. >
# < 7 August 2015 14:47:47 IST > < Info > < EJB > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [pending]: '3' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < < > anonymous > > <>< 1438939067666 > < BEA-010060 > < The Message - Driven EJB: EmailDeliveryBean a connected/reconnected to the JMS destination: jms/capture-emaildelivery-queue. >
# < 7 August 2015 14:48:25 IST > < health > < > < webcdev2v.industowers.com > < capture_server1 > < weblogic. GCMonitor > < < < > anonymous > > <>< 1438939105230 > < BEA-310002 > < 45% of the total server memory is free >
# < 7 August 2015 14:48:47 IST > < Info > < JDBC > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000KvwxceS8PtG5IzWByf1LkSX0000002 > < 1438939127324 > < BEA-001516 > < "IPMDS" connected to the data source connection pool database : 'Oracle', Version: 'Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production.
With the options of partitioning, OLAP, Data Mining and Real Application Testing". >
# < 7 August 2015 14:48:47 IST > < Info > < JDBC > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '5' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000KvwxceS8PtG5IzWByf1LkSX0000002 > < 1438939127326 > < BEA-001517 > < pool "IPMDS" using the driver for the data source connection : "Oracle JDBC driver", Version: "11.2.0.3.0." >
# < 7 August 2015 14:48:47 IST > < Info > < shared > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000KvwxceS8PtG5IzWByf1LkSX0000002 > < 1438939127334 > < BEA-000628 > < available resources creation '1' for the 'IPMDS' pool, including '1' and '0' are not available. >
# < 7 August 2015 14:48:47 IST > < Info > < JDBC > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000KvwxceS8PtG5IzWByf1LkSX0000002 > < 1438939127555 > < BEA-001516 > < pool "capture-mds-ds" connected to the database for the data source connection : 'Oracle', Version: 'Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production.
With the options of partitioning, OLAP, Data Mining and Real Application Testing". >
# < 7 August 2015 14:48:47 IST > < Info > < JDBC > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '5' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000KvwxceS8PtG5IzWByf1LkSX0000002 > < 1438939127557 > < BEA-001517 > < connection pool "capture-mds-ds" of data source with driver: "Oracle JDBC driver. Version: "11.2.0.3.0." >
# < 7 August 2015 14:48:47 IST > < WARNING > < JDBC > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000KvwxceS8PtG5IzWByf1LkSX0000002 > < 1438939127558 > < BEA-001110 > < no table test didn't put in place for the pool 'capture-mds-ds. " Connections will be tested. >
# < 7 August 2015 14:48:47 IST > < Info > < shared > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000KvwxceS8PtG5IzWByf1LkSX0000002 > < 1438939127562 > < BEA-000628 > < Created '1' resources for pool 'capture-mds-ds', which '1' are available and '0' are not available. >
# < 7 August 2015 14:48:47 IST > < Info > < JDBC > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000KvwxceS8PtG5IzWByf1LkSX0000002 > < 1438939127773 > < BEA-001516 > < "SDM - axf" pool connected to the database for the data source connection : 'Oracle', Version: 'Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production.
With the options of partitioning, OLAP, Data Mining and Real Application Testing". >
# < 7 August 2015 14:48:47 IST > < Info > < JDBC > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '5' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000KvwxceS8PtG5IzWByf1LkSX0000002 > < 1438939127775 > < BEA-001517 > < connection pool "SDM - axf" data source using the driver: "Oracle JDBC driver. Version: "11.2.0.3.0." >
# < 7 August 2015 14:48:47 IST > < WARNING > < JDBC > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000KvwxceS8PtG5IzWByf1LkSX0000002 > < 1438939127776 > < BEA-001110 > < no table test didn't put in place for poolside "SDM - axf. Connections will be tested. >
# < 7 August 2015 14:48:47 IST > < Info > < shared > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000KvwxceS8PtG5IzWByf1LkSX0000002 > < 1438939127779 > < BEA-000628 > < Created pool 'SDM - axf', whose '1' '1' resources are available and '0' are not available. >
# < 7 August 2015 14:53:25 IST > < health > < > < webcdev2v.industowers.com > < capture_server1 > < weblogic. GCMonitor > < < < > anonymous > > <>< 1438939405281 > < BEA-310002 > < 34% of the total server memory is free >
# < 7 August 2015 14:54:25 IST > < health > < > < webcdev2v.industowers.com > < capture_server1 > < weblogic. GCMonitor > < < < > anonymous > > <>< 1438939465290 > < BEA-310002 > < 66% of the total server memory is free >
# < 7 August 2015 14:59:16 IST > < Info > < JDBC > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939756419 > < BEA-001128 > < connection to 'IPMDS' pool was closed. >
# < 7 August 2015 14:59:17 IST > < Info > < JDBC > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939757244 > < BEA-001128 > < connection for pool "capture-ds" has been closed. >
# < 7 August 2015 14:59:17 IST > < Info > < JDBC > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939757373 > < BEA-001128 > < connection for pool "capture-mds-ds" has been closed. >
# < 7 August 2015 14:59:17 IST > < Info > < JDBC > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939757505 > < BEA-001128 > < connection for "SDM - axf" pool was closed >.
# < 7 August 2015 14:59:17 IST > < Info > < JDBC > < webcdev2v.industowers.com > < capture_server1 > < ExecuteThread [ASSET]: '5' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1438939757655 > < BEA-001128 > < connection for "SDM-GOSA" pool was closed >.
# < 7 August 2015 14:59:36 IST > < Info > < shared > < webcdev2v.industowers.com > < capture_server1 > < MDSPollingThread-[GOSA, jdbc/mds/GOSA] > < OracleSystemUser > <>< 0000Kw7SBjr8PtG5IzWByf1Ll7RY000002 > < 1438939776574 > < BEA-000628 > < Created pool 'SDM-GOSA', whose '1' '1' resources are available and '0' are not available. >
# < 7 August 2015 15:03:25 IST > < health > < > < webcdev2v.industowers.com > < capture_server1 > < weblogic. GCMonitor > < < < > anonymous > > <>< 1438940005384 > < BEA-310002 > < 54% of the total server memory is free >
Thank you
Hello
I need to perform a test on your side, seems specific OS:
Please go to the rental
oracle_common\modules There will be some jars of name 'org.objectweb.asm.attrs_1.5.3.jar' and 'org.objectweb.asm_1.5.3.jar '.
Can you just take two jar from this location to the top/Remove these files and store elsewhere.
Then restart all the servers Admin and the capture and the test scenario. In case any questions please restore back to the top of these files.
Note: in fact at this point I don't know if this will solve the problem but I'd like to test this out of your end because it is not reproducible in our system
Can also provide you with the screenshot below at the bottom of the location, libraries:
servers\AdminServer\tmp\.appmergegen_1439352348932\capture.ear\9lwrr6\WEB-INF\lib -
If I have a small Firefox page I can not open a NEW page. He let me just open a new tab on the reduced page. I used to be able to open a new page in browser icon on my desktop, but for these last days, it won't let me. It is a desktop computer, running Windows 7. Everything is up-to-date.
Hi Deb, it's hard for me to test it personally because I've pinned the shortcut of Firefox to the taskbar, which changes its behavior, and when I remove it, I don't fit my desktop icon. (?!)
Anyway, as a temporary workaround solution while we sort out this point, you can use the 'Skip' list: right click on the Firefox icon in the task bar and choose 'Open a new fenΩtre' that should certainly generate a separate window and not only a new tab in the existing window. Normally works?
Firefox has a hidden setting that you might try to change to see if it makes a difference. Normally, when you open a link in another program, it opens in a new tab in the last window of Firefox, that you used. Your what's doing? I propose changing the setting so that the link must open in a new window to see if it has an impact on this problem.
(1) in a new tab, type or paste Subject: config and press ENTER. Click on the button promising to be careful.
(2) in the filter box, type or paste link.o and make a pause so that the list is filtered.
(3) double-click the preference browser.link.open_newwindow.override.external and set its value to 2 and click OK.
The possible values for this preference are as follows:
-1 = follow your settings in the Options for new tabs vs new windows (default)
3 = open external links in a new tab in the last active window
2 = open external links in a new window
1 = open external links in the last active tab replaces the current pageThere are a few other similar named preferences, so be sure to change one that has 'external' in the name.
Any difference?
-
How to stop the page button to open the console?
When I press the next page button it opens the debugger console, as well as the home keys and end do not work.
I am running windows 10 on a new Surface of MS pro 3I disabled all add ons, but the problem persists.
You may have switched to the keyboard navigation.
You can enable or disable navigation to keyboard/disable by pressing F7 (Mac: fn + F7).
- Tools > Options > advanced > general > accessibility: [] "always use the cursor keys to navigate through the pages."
Note that this is a function of Firefox Accessibility.
- http://KB.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
- http://KB.mozillazine.org/Accessibility_features_of_Firefox
Start Firefox in Safe Mode to check if one of the extensions (Firefox, Tools/menu key > Modules > Extensions) or if hardware acceleration is the cause of the problem.
- Put yourself in the DEFAULT theme: Firefox, Tools/menu key > Modules > appearance
- Do NOT click on the reset button on the startup window Mode safe
-
How can I disable the newtab most used feature display sites. I want the new tab to open the page displayed in the newtab:url in the topic: function config
41 of Firefox is no longer uses the browser.newtab.url setting in about: config because he was constantly attacked by malware. From 41 of Firefox, you need an add-on to change the new tab page.
Here are a few options (I'm learning more all the time):
- If you are already using the extension classic restaurateur theme: There is an option somewhere (!) in his dialogues of the parameters to select another page in the new tab.
- If you want to use your new tab homepage: Try https://addons.mozilla.org/firefox/addon/new-tab-homepage/
- If you want to set another page or a completely blank page: Try https://addons.mozilla.org/firefox/addon/new-tab-override/
Setting up substitute again tab
After installing this extension, you must use the Options page to set the new desired tab page (instead of use subject: config).
Open the page modules using either:
- CTRL + SHIFT + a (Mac: Cmd + shift + a)
- "3-bar" menu button (or tools) > Add-ons
In the left column, click Extensions. Then on the side right, find the new tab override and click the Options button. (See first screenshot attached).
Depending on the size of your screen, you may need to scroll down to enter the address in the form. (See second screenshot attached). For example:
- (Default) page thumbnails = > subject: newtab
- Blank tab = > subject: empty
- Built-in Firefox homepage = > topic: welcome
- Any other page = > full URL of the page
Then tab or click this form field and you can test using Ctrl + t.
Success?
Once you have set it as you wish, you can close the Add-ons page (or use the back button to return to the list of Extensions of this Options page).
-
When I opened Mozilla after realizing my mistake, he showed on page 10 Windows open and it's my session restore. DON'T WANT! I want the session before the session Windows 10.
To open the history, Manager press the ALT or F10 to rise
the tool, then select history. Access key is < Control >(Mac: < command >) < shift > H. -
When I go to internet banking as a clydesdale, it opens a new page to connect, but a few days ago it stopped working with the new update. Now when I click on connect, it says "FOUND the document pushed here." and clicking here opens another page of connection, but after being entered the details the page doesn't load. the same thing happens on other sites, on the other, when I click to read the messages page does nothing, and if I click to open in a new tab the same page is displayed instead.
GundamGirl said
Theres been other people having this problem too...
Yes, for example, that this person- https://support.mozilla.org/questions/1078226 -, but they did not post cost around if any suggestion made a difference, I appreciate your following upward.
Here are two other things to check:
(1) connection settings - have they been customized?
"3-bar" menu button (or tools) > Options > advanced
Click the mini network, and then click the settings button
The default value of 'Use system proxy settings' should follow your 'LAN' setting, as well as IE, but you can also try 'No proxy' to see if that makes a difference.
(2) extensions - test Firefox to turn off Safe Mode
Firefox Safe mode is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.
Does not work if Firefox: Hold down the SHIFT key when you start Firefox.
If Firefox is running: You can restart Firefox in Mode safe mode using either:
- button "3-bar" menu > "?" button > restart with disabled modules
- Help menu > restart with disabled modules
and OK reboot.
Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).
Any improvement?
-
Why a page of advertising opens the same time as the opening of the browser?
I click the icon to open Firefox, and a second tab opens to a page of advertising, with audio and video. I don't want that!
Hello
It can happen that your computer has some malware or expose malicious software - like symptoms.
I recommend you to walk through this article, but if the solutions do not resolve the problem for you, please come back with more details and we will have a look to another solution for you.
-
Hello guys and girls,
I have a problem with opening of new tab.
Yesterday, when I click on the '+' to open the new label he would bring a page showing recent sites, I could choose.But for some reason today, when I click on the "+" to open a new tab it does not the recent sites but goes directly to Bing.com.
My home page is set to a Web site that I use and I never use bing, I also don't have not installed all the software causing this change.
How to reset the tab for bing site page does not open when I try to open new tab?
Maybe forced Microsoft somehow a change from Windows 10 is now, you I use windows 8 and I have no intention to get windows 10.Thanks in advance
GrenProbably not changed by Microsoft or we would have hundreds of reports now...
Here's how you can change your new tab page:
(1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.
(2) in the search above the list box, type or paste newtab and make a pause so that the list is filtered
(3) double-click the preference browser.newtab.url and enter your favorite page:
- (Default) page thumbnails = > on: newtab
- Blank tab = > subject: empty
- Built-in Firefox homepage = > topic: welcome
- Any other page = > full URL of the page
Press Ctrl + t to open a new tab and check that it worked. Fixed?
If the problems persist, some potential diagnoses and remedies:
If Firefox will not let you change this setting: you can have what is called SearchProtect on your system. This must be removed the control panel. If the status is 'locked' we'll need to help you investigate a configuration file "automatic".
Firefox if allows you to save your changes, but he doesn't know: one of your extensions may be the substitution of her. You can consult, disable and/or remove extensions on page modules. Either:
- CTRL + SHIFT + a (Mac: command + shift + a)
- "3-bar" menu button (or tools) > Add-ons
In the left column, click Extensions. Then, take a critical look on the list on the right and turn off (or remove) something unknown.
If the modification works during your session, but during the next startup is return to the unwanted page: you could have a user.js file in your personal settings Firefox (your Firefox profile folder). This article describes how to track down and delete the file: How to fix preferences that will not save.
A little luck?
-
new tab opens my home page, but I want to open the more visited sites
new tab opens my home page, but I want to open the most visited sites. Ad-aware messed up the settings.
You can check the browser.newtab.url pref on the topic: config page and set this pref to your preferred the new tab page.
- the new default tab with the tiles page is on: newtab
- the default homepage is Subject: Home
- to a blank page, you can use Subject: vacuum
The pref browser.newtabpage.enabled must be set to true to use the page defined through browser.newtab.url like the new tab page.
See this article on the page tab (topic: newtab):
You can open the topic: config page via the address bar.
You can accept the warning and click on "I'll be careful" to continue. -
When I try to open the pages or numbers on my iMac I get "new version required.
When I try to open the pages or numbers on my iMac so that I get "new version required" open documents saved I must login to iCloud and open from there. Why? These same documents are readily available on my iPad. I bought both programs and all updates are current. Not very happy with this complicated route I take to work on a document
Any suggestions
< re-titled by host >
You attempted to open a document v5 of Pages via the file picker Pages ' 09. Exit Pages ' 09 and then double-click on the same document to open it in Pages v5. You will not have this problem on iOS, because iOS Pages or Pages for iCloud open the two versions of the documents.
-
When I open the browser, I get an extra tab in addition to my home page that opens. I want my home page to open.
Have you checked the target line in the properties of the desktop shortcut?
You can check the suspicious extensions or recently installed unknowns.
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.
- Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
- Do NOT click on the reset button on the startup window Mode safe
Maybe you are looking for
-
The volume of calls on my iPhone 7 is very low. I have the volume all the way up. Any ideas how can I fix?
-
I have check the character encoding, but another site work fine.now my character encoding showing unicdoe (UTF - 8)I tried to change the iso (88591) West, but it does not change the symbol question mark filled diamond site. symbol of the diamond show
-
I accidentally deleted (windows xp professional sp2) microsoft high definition audio driver package kb888111 from my computer, where can I download it? If anyone can, please help me! I would really appreciate it! Thank you very much!
-
OfficeJet Pro 8500 first, working to the new router. Menu locked up now, wireless
Printer is HP73053C (Office Jet Pro 8500 A909n first) converted from DSL to cable modem. Now wireless cannot find printer and lost top buttons (Tools, ink level and help) features. Windows 7 pro 64-bit. HP support intervened during the WEB search
-
What is my software works with Windows 10
Currently I have a machine with Windows 7 and the other with Windows 8. What is my software works with Windows 10?