Validation of the chain of input of qnx playbook dialogue

Similar Questions

• Extraction of fixed phone number valid in the chain

  Hello

  We have field Phone_Number where data from the source system are as below:

  OFFICE: 026346644 # MOBILE: 0506212159

  MOBILE: 055-4705510 # OFFICE: 06-5035522/530

  Problem - we need to extract the valid landline phone number United Arab Emirates UNITED string ignoring the remaining details. Guys like 'OFFICE', ' MOBILE in the data are not significant and should not be considered. Even if the chain has several fixed phone number valid UNITED Arab Emirates, from 1 single value among them.

  Approach: We use regular expression check with 'Match list contains' but check only works on any value and not on the substring or part of the chain. Please suggest.

  Thank you

  Amol

  Hello Amol,

  Control RegEx is an 'Audit' processor then it will only tell you if a value passes or fails a control. If you want to return a value [i.e. phone number retrieves] then you will need to use the replacement of match or regex regex. Yes, regex to works on the entire chain, so you will need to write your regular expression as a result to find the phone number in among other content by using a capture group [Regex Tutorial - parentheses for grouping and capture]

  Thank you

  Nick

• LOV custom: Validation of the input value

  Hello, I am new in the OPS. Recently I tried to create a custom lov (column in a table), in an existing standard page.

  I need to validate the value inserted by the user.

  Validation, when I press the standard record button, works very well, but only for the last line clicked from the table.

  I need the validation of the row of the table.

  I'll elencate my approach to create. What Miss me to do?

  Tree of customization:

  columnHeaderID (column)

  -> myLovID (Lov input Message)

  -->--> the mappings of Lov

  ->->-> xxmap1ID (LovMap)

  ->->-> xxmaphelpID (LovMap) (*)

  -> myFormValueID (Form, Value) (*)

  -> column heading

  -->--> sortable header: nome colonna

  The question, I added, to allow the standard validation (in green):

  part of criteria (*) = myLovID

  box item attribute of the value returned by lov lov = name

  article = myFormValueID return

  use for validation = Y

  (*) view attribute = attribute of vo in the page, because I need to insert the value

  view instance = vo in the page, because I need to insert the value

  Thank you

  J

  
  

  I'll answer by myself: for the validation of all rows with the lov, I had to add a new attribute to vo in the controller of the main page and then set the mode of myFormValueID to this created attribute attribute.

  So I got the full validation.

• Input string must be no space in the text field - validation of the need.

  Hello
  
  I need validation on the text field, like I should be able to single string entered in the text field. for examples - if I entered 'new test', it must raise the error. I should be able to enter only 'test '. (single channel)
  
  Can someone help me to give better suggestion.
  
  Kind regards
  Harish Sharma

  1002384 wrote:

  Thanks for the reply, but I'm still confused, I put this "not regexp_like (: Px_ITEM, ' [[: space :]]')]])" in PL/SQL Expression validation in the Expression of Validation 1, but I have to put in exp2.

  You seem to be an existing posting of editing rather than creating a new. 2 validation expression is not used with PL/SQL Expression validations: all the necessary code is contained in 1 Expression of Validation. Review validation options Type: those who use the Validation Expression 1 and 2 Expression of validation explicitly state what values will each. Other types of validation use only 1 Expression of Validation or not.

• Using a control of the chain with the Enter key, return * and * allowing repeated identical entry

  Hi all

  There must be a simple solution for this, but it's Friday afternoon, and my brain is not cooperating.

  I create a simple terminal through which a user can interact with an instrument. My question is about the only query string control. The button send and the Terminal Table are here for reference.

  

  Here is my desired behavior:

  (a) the user types a command in the field of the query, tape input or return. An event is triggered, and the request is sent to the instrument. The focus remains on the field in the query.

  (b) with any other action the interface user, the user types Enter or return again and again, by triggering an event that sends the request to the instrument every time Enter or return is typed. The focus remains on the field in the query.

  Here's what I have:

  

  This allows for one), but fails to b). The reason is, because the value of the field in the query has not changed, change value event does not fire when the user starts to spam keys enter or return. There is a way around this, as suggested by this post. Here is the solution in a few words:

  

  Instead of looking for the change in the value of the query command, the event fires for each key event to the bottom of the control and resembles a pressure of enter key or return. What attracts the user action, even if the content of the field of the request have not changed. The problem with this approach is that, when this event fires, I need to read the value of the query string order and send it to the instrument, but the value I get via the local Variable query is the old value, probably because the key down event fires before the value of query is saved as changed. Is there a way to programatically "enter" the contents of the control channel so it is recorded as a change in value, until I have the question via a local Variable? Is there a different way I should go about it? I'd rather not do anything that bound the input keys or return to this particular area, since I have many other UI elements that need these keys in my program.

  If not, is there a way to make the control of the fire 'Change of value' query string event when the user presses enter or return even if the value has not changed?

  Thank you for your comments!

  I thought about it.

  (1) control of the string (query) a value of update while typing.

  (2) save the key event down to the control of the chain. If the entry or return was pressed, send the state machine to the State 'send request '.

  

  (3) in the application 'send' State read control channel via the local Variable value.

  

  This is the desired behavior to allow the user repeatedly hit entry or return to regularly send a command, and the user can also type in a new order and send it by pressing enter or return.

  Thanks to all who have helped me this something to think about!

• What is the analysis of the chain model for "fits all"?

  Hello

  Using scan chain for a while, I know that %s corresponds only to chain up to white space. And I also thought % [^] matches everything, including spaces. But it turns out that it stops at the closing brace square.

  So what's the real scan pattern match everything including spaces?

  Want you that the Scan of chain at the end on?  Or are you typing just the rest of the chain?  If this is your scenario, then simply use the output 'remaining chain.  It might be useful to give a complete example of a normal input string and all WHAT you want as output.

• Verification of task names valid in the basis of NOR-DAQ

  Hello

  I have a question about the configuration of the tasks in the version of Base of NOR-DAQmx (I need basic because the application will need to be able to run on both Windows and Mac computers). The material is a box USB-6009, ordered through LabView. When you create a task inside LabView, is it possible to tell if the name you choose is already in use or not?  Similarly, is it possible to get a list of and if all tasks are running?

  The context is that I have a subroutine that made a brief burst of acquistion of analog input and then passes the result to the caller. I would like also to the subroutine to run standalone for different testing purposes. Normally, I would have the subroutine create and configure a task, the measure and then close the task. The problem is that the process of create/set up/start takes about 200-250 milliseconds (the measure itself is about 20 ms) that is long enough that I don't want to go through it whenever the subroutine is called from the top (I need to call this routine and do some other stuff a few times per second). So what I would is have the name of the task as a control on the subroutine, test that the value is a valid and if not valid only the initialization/etc. in the context of the subroutine, but if the subroutine has been passed a valid task from the top to skip a step all the time.

  Looking through all of Base of NOR-DAQ functions, it doesn't seem to be something that allows me to do this kind of check with the exception of brute force to try to create a task and trapping so all errors that might be generated.

  Suggestions (or ways) welcome.

  Kelsey,

  It seems that the property node is a component DAQmx, not a component DAQmx Base .  I can't find any DAQmx Base property nodes.

  dmsilev,

  Try to replace the property node of the tasks with the DAQmx Base get tasks.vi.  It is not in the DAQmx Base palette. It's a Subvi DAQmx Base create Task.vi.  Caution: when you use a Subvi, which isn't on the pallets, know that they are generally not documented well and are subject to change in future versions of LV

  

  If you weren't aware, DAQmx Base is written in LV and almost all the diagrams are not p [rotege so you can look inside and see how things are doing.

  Lynn

• Registering a dll file to start the service HID Input Device

  Hello

  I would like to register the dll located in my System32 hidserv.dll. However, when you enter the command 'regsvr32 hidserv.dll' I have an error message indicating that: "hidserv.dll was loaded, but the DllRegisterServer entry point was not found. This file cannot be saved. "

  How I then save it, knowing that I checked that this file is not corrupt?

  I need to register this dll in order to start the "HID Input Device" who stubbornly refuses to start despite an integrity check in the registry.

  The system event viewer specifies that:

  "HID Input Service service terminated with the error:
  Error 126: The specified module is not found. "

  I already tried to extract hidserv.dll, mouclass.sys & mouhid.sys sp2 and sp3 even to put them in the C:\Windows\System32 directory, but I had no change.

  The files I have place in my SYSTEM32 have the following version:
  Hidserv.dll: 5.1.2600.5512
  Mouclass.sys: 5.1.2600.5512
  mouhid.sys: 5.1.2600.0

  but the service still does not start even after rebooting. The 126 error continues. Is there other files to extract / expansion?

  I checked the integrity of all stakeholders key in the registry (for example, to have the "ServiceDll" key whose value is "% systemroot%\System32\hidserv.dll" in the settings of the service HIDserv ControlSets), but nothing more.

  I give you an export of the current CS:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ]
  "DependOnService" = hex (7): 52, 00, 70, 00, 63, 00, 53, 00, 73, 00, 00, 00, 00, 00
  "Description"="allows generic inbound access to the user interface devices, which activate and maintain the use of the active buttons preset on the keyboard, remote controls, and other multimedia devices. If this service is stopped, the normal controlled active buttons not of will operate this service don't. If this service is disabled, any services dependent on explicitly will not start. »
  "DisplayName"="HIDDEN Service entry.
  "ErrorControl" = DWORD: 00000001
  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,76,00,63,00,68,00, 6f, 00, 73, 00, 74, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 20, 00, 2d, 00,------.
  6 b, 20, 00, 00, 6F, 00, 65, 00, 74, 00, 73, 00, 76, 00, 63, 00, 73, 00, 00, 00
  "LocalSystem ObjectName"=""
  "Start" =: 00000002
  'Type' = dword:00000020

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" = hex (2): 20, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Enum]
  "0" = "Root\\LEGACY_HIDSERV\\0000."
  "Count" = DWORD: 00000001
  "NextInstance" = DWORD: 00000001

  By analyzing the Observer newspaper of events more deeply, I could identify the date on which took place the first concern. The problem is dated, 18/08/2010 at 11:59:17 (it sticks with the conclusion of the first concern of losing control of my volume on my Logitech G110 keyboard also control buttons). I don't remember having a particular to this date on my system change, except perhaps a Windows Update automatically.
  I could not try a system restore, knowing that the RP oldest I have is dated 20/08, so downstream of the original problem.

  I ran a File Checker sfc/scannow system with my Windows XP Pro SP3 (current version of my system) installation cd. I've been thinking about it since a cd to install Windows XP Pro SP2, but better is worth twice more than once. I also realized a CheckDisk, but these two operations have not changed the problem.

  You will find export of address following my diary of events on the system.

  I have completed all of the tasks (start, replacement dll, see registry, SFC,...) while logged on sessions 'standard user', 'administrator' and even as a 'SYSTEM' (NT Authority), but in none of these configurations, it was possible for me to start this service. If I come to you, is precisely to avoid passing through a repair using the cd which would have made me lose a lot of time. I don't usually do the use of support services, in general the case has already been handled and the response or similar cases are on the web. But now I feel like in front of a technical impasse. I appeal to your specific skills to do what is necessary for good service restarting without using a remedy that eventually a reinstallation of the system.

  It you want to check my configuration, you can find it here.
  If you need more information, feel free to contact me. I would be happy to answer them.

  Until then, thank you very much. Kind regards.

  Arnaud TIERANT.

  First of all, the hidserv.dll is not a DLL that can be recorded.  You can try all day long, but it will not be because he is not on the list of DLLs that will be or must be registered.  There is a list, and which is not on it.  (well thought of).

  Your problem is in the registry with the HidServ, section ServiceDLL parameter.

  You have a space left in the key ServiceDLL.  In regedit, it should look like this:

  %SystemRoot%\System32\hidserv.dll

  Yours probably looks like this in regedit:

  %SystemRoot%\System32\hidserv.dll

  See the space left?  I don't know how it got that way (perhaps something that was installed for these humans), but I know that if I put a space in front of me and restart my system, HID service not start and give me an error 126 as you describe.  He has no idea about the problem in the log events.

  With space on the left, the specified module really not found because there is no such thing as the path (with the space to the left).

  Your registry export reveals this problem.

  Yours looks like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" =hex (2): 20, 00, 25, 00,53,00,79,00,73,00,74,00,65,00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  It should look like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" =hex (2): 25, 00,53,00,79,00,73,00,74,00,65,00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  In your, you can see I have stuff in bold print on the front of the chain: 20.00...  In hexadecimal, is a space and a null value (null value is correct).  You must use regedit to get rid of this leading space (20 hex), and don't forget that, in the settings section, the first character of the value ServiceDLL is the % sign (which is a hexagon of 25).

  You can, of course, just change the string, delete everything that is there, and retype the value if it looks like this without spaces attack/crawling:

  %SystemRoot%\System32\hidserv.dll

  The HID Service will not start if you come to make the changes and try to start the service.  After making your changes, you need to restart, you can check it out, and then start the service HID.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• What is a good way to determine the validity of the GPS with BPS?

  Hello

  I use bps for a native application on the Playbook. There are a lot of functions to call to get information about the events of geolocation, which is great. But I'm looking to distill information into something that could tell me if yes or no position (lon, lat at least) is designed to use in my application... it is to tell whether or not I am a "GPS coordinates". You can check the validity of all to a large number of parameters (altitude, heading, speed, etc.) ... but nothing that tells you if lon and lat are valid.

  Does anyone have advice as to how I can a true/false 'gpsIsValid' extracts the available data?

  REF;

  http://developer.BlackBerry.com/native/reference/PlayBook/com.QNX.doc.bps.lib_ref/com.QNX.doc.bps.Li...

  If you get a reading at all, it should be "valid" in the sense that it came from calculated data based on the satellites used.

  What you need to do is to decide 'how' it is valid, that's up to you: https://developer.blackberry.com/native/reference/playbook/com.qnx.doc.bps.lib_ref/com.qnx.doc.bps.l...

• Prevent validation when the page navigation

  I use Jdev 11.1.1.7.0.

  I have a jspx page that has an empty form.

  But when I want to leave the page without entering anything, I get the form validation error messages.

  How can I prevent the validation error without worrying if the form has input values?

  Set the immediate property of the component of the navigation (link... button) to 'true '.

  Timo

• During installing After Effects CS6, after the number of input series - report «we are unable to validate the serial number for Adobe After Effects CS6.» Please contact the support. »

  During installing After Effects CS6, after the number of input series - report «we are unable to validate the serial number for Adobe After Effects CS6.» Please contact the support. »

  What are the blocker of Adobe which affects the serial number validation processes.

  Follow the procedure below:

  • Remove all entries that has name of adobe. Then close the Textedit, it will Autosave.
  • Make sure that there is no entry of Adobe on the inside.
  • Then copy and paste the Hosts file in folder etc.
  • We replace the modified hosts file that we had copied on the desktop with the original Hosts file inside the folder etc.
  • When you are prompted, the authentication by password Mac,
  • Be sure to select the option Replace ...
  • Once you have replaced the Hosts file, double click on it again and check if the Hosts file is free of Adobe entries.

  Then try to activate the CS 6 apps using the serial number, it shud work.

  Let me know if you face any problem.

• Reg: Validation of the PL/SQL codes-

  Hi Experts,
  
  Need some ideas/advice about a tool " check/validation of the code syntax .
  
  Is it possible - to create a PL/SQL procedure (for example, ' X') where the i / p will be any creation of the Table or procedure script. X will check the syntax and any other coding loophole postings.
  In fact, we have a lot of overhead of manual checking the code for some best practices of coding. Just so desirable to automate their in a proc X.
  Can be written Regexs or any other way... a few checks as -.
  + 1] + CREATE or REPLACE PROCEDURE < schema_name >. < proc_name >
  Usually developers here avoid the schema name.
  
  + [2] + good Exception blocks with no. SO that OTHER THEN NULL;
  
  Is it really feasible or I'm just too think?
  
  (I have access to 10g and 11g databases).
  
  Please suggest some ideas. (from now on, I've tried for a windows batch script that will check for the validation of the scripts stored in a folder that + .txt)
  Help much appreciated.
  
  Vanessa B.

  nordine B wrote:
  The words were really wonderful, Etbin. Thank you!

  But, naming conventions g_ , v_ and . can never (mostly) right change..?
  So just try to find something like that.

  Start a simple tool and gradually increase the complexity.

  Or, do you have any other tool in mind which can reduce the daily effort?
  No matter what tool you find really useful and interesting development - to facilitate the daily efforts

  FYI - we have one tool, input a proc/table gives all other objects related to IT... same indexes, triggers, etc. Something new as this ;)

  When I was a 'Developer' (we called the postion "Programmer/Analyst"), we spent a lot of effort on the naming of standards. And given that the standards have been published and known by all programmers in the shop, catch violations has been easy to do during code reviews, even if it wasn't the purpose of focus or the destination of the revision of the code.

  So, if you are doing critical business logic code and you have a manual of standards published to cover the naming conventions, etc., then standards will be a trivial addition to a revision of the code "business logic". I think that you are pursuing a solution in search of a problem. I know it's hard for the younger generation to accept, but sometimes automation is simply not the solution. Or at least not the optimal solution.

  In fact, there is a little human psychology comes into play. If you have published standards, you don't even have to do "compliance" of the order of the day on a revision of the code "business logic". Developers will be quick to them yelling, and the fear of this will help the grip in the car in the first place. This is a factor that is not understood by computers or human beings who believe that computers are the solution to everything.

  That said, he has there the tools that will help identify some problems. SQL Navigator is one that comes to mind.

  Published by: EdStevens on February 17, 2013 18:19

  Published by: EdStevens on February 17, 2013 18:22

• What is the difference between input vs. cfinput?

  What is the difference between input vs. cfinput?
  
  key benefits?
  
  Thank you
  

  If you're a coldfusion developer, you might as well enjoy the coldfusion technology. Use CFINPUT. its always good with client-side and server-side validation

• Validation of the CFSELECT as Flash format

  In the past, I used the Javascript validation in CFFORMs to validate the CFSELECT of entry, due to the bug in Coldfusion validation (most of my client sites are on shared servers, so I can't change the cfform.js file).
  
  The Javascript code, I found a place worked very well:
  
  <! - validation functions - >
  < SCRIPT LANGUAGE = "JavaScript" >
  
  function ExtendJS (FormName) {}
  If (!.) {SingleSelectRequired (FormName, 'Event_Description'))}
  Alert ("you must select a provider from the drop-down list.");
  Returns false;
  }
  }
  
  function
  {SingleSelectRequired (shape, field)
  var itemSelected =
  eval ("document." + form + ".")
  + Field + 'SelectedIndex');
  If (itemSelected == 0) {}
  Returns false;
  } else {}
  Returns true;
  }
  }
  < /script >
  
  Then, in my CFFORM Tag:
  < cfform
  name = "formName".
  action = "index.cfm? section = 4 & offer = 1".
  preservedata = "Yes".
  enctype = "multipart/form-data".
  method = "POST".
  format = "HTML".
  onSubmit = "return ExtendJS ('FormName')" >
  
  Now, I'm looking to determine the CFFORM format = "Flash"... Well, not only explore, way down the road to develop a web app... and I found my old validation methods do not work. It seems that I have to use Actionscript now.
  
  Does anyone have a good implementation of Actionscript form validation that they can share with me? Or point me in a different direction if I'm off base here?
  
  Thank you
  Max

  It is difficult for me to believe that I'm the only one who had problems with the CFFORM = validation of the cfselect "flash" format But hours of searching turned up VERY LITTLE. I managed to combine something, then someone else has this problem, that happens on my post, here's how I solved it:

  perform the validation client side here if you want to
  validationError var = 'False ';
  var myString = "Please select a value for the following:";
  var alertTitle = "necessary input data;
  If (theForm.testSelect.value is "none")
  {
  validationError var = 'True ';
  var myString = myString + "Place,";
  }
  If (theForm.testSelect2.value is "none")
  {
  validationError var = 'True ';
  var myString = myString + "Option2,";
  }
  If (validationError is 'True')
  {
  Alert (MyString, alertTitle);
  Returns false;
  }

  
  
  Select one
  
  
  Select one
  
  
  
  
  

• If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore all changes since the first full file

  If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore the file with any changes made since the full backup first file...

  If the TM drive storage is full TM automatically deletes the version the oldest files for the new incremental backups can be made. Thus, in this case you cannot restore the versions that TM deleted because it takes more storage.