Validation table - advice on the best approach to please? :)

Similar Questions

• Need some advice on the best way to do specialized source distribution

  I need to give a customer a labview block, they can use our material in their own labview code that will read the (encrypted) data net senor off the coast and the flow of data in a form usable output.  I built a vi that can be used in a loop, a bit similar to the block of canned labview data acquisition that can be used to acquire data from products OR.

  There are many sophisticated (and secret) algorithms going on in the background which make sense data and translate them into a usable data table, but also configure the hardware itself. Accordingly the only final vi I prepared to distribute the client makes use of Subvi about 20. Almost none of these subvis could be ideally be reconverted in plain code in main vi, nor what I want to do this.

  The rules of the game is the following: I want to give him the block I created to use its own code, without him to see what's happening inside the vi.  I can deny him access to the block diagram/s, no problem, but I don't want to give him access to the subvis, to use, or even to know their names - preference they would be hidden or otherwise pre-compiled. Preferably I would just give him the main block only, perhaps with some support files that would be entirely opaque to him.

  Looking for advice on the best way to go. There is an elegant solution to this problem? For example, it would be better to compile the block as a .dll file, and then write a wrapper vi any?

  Have you thought of creating a packed library? You can also password protect your code. You can delete the distributed code block diagrams. You can use a combination of the above as well.

• What is the best approach to the conversion of the LV7.1 tags to the variables shared by several screws LV2012?

  What is the best approach for the upgrade of the DSC-LV2012/LV7.1/DSC static variable tags in several screws running on several platforms? Our system is made up of about 5 PC running Windows 2000/LV7.1 DURATION, the more a PLC and a PDC running XP/SP3/LV2012. About 3 PC publish information from the sensor through tags on the local network to the PDC. Only the main command is currently being upgraded. Basic questions:

  1. the other computers running RTÉ 7.1 (with labels) will be able to communicate with the PDC running 2012 (shared variables)?

  2. is it necessary for conversion of tags shared variables, or the deprecated legacy tag screws of LV7.1 work in LV2012?

  3 all of the main controllers will be screw must be integrated in a project in order to use shared variables?

  4 is the only way to do it is to find all the tags and replace them with elements of shared variable?

  Thank you in advance with all the information and advice!

  lb

  Hello lb.

  Datasockets are the common middle only my knowledge between versions, so apart from the upgrade to the same version, they will probably be your best bet.

• Need your advice, choose the best update for first Pro CC

  Need your advice, choose the best upgrade.

  Because nobody can have a computer that runs all functions as quickly as desired, we have manage their it resources according to your needs, budget and for the money. Below is a fundamental issue related to Adobe Premiere Pro 2015 CC.

  Need for better visualization without jerky look of a stutter and overall better performance incease.

  Would I do better with? (Choose one please)

  1. Passing of an SSD to 2 SSD in RAID 0 configuration - cost about $350.
  2. Getting my video card NVIDIA GeForce GTX 560 Ti for a NVIDIA GeForce GTX 970 overclocked to 4 GB GDDR5 graphics card - $350.
  3. From Win 7 Pro 64-bit to win 10 Pro 64-bit.

  Please explain why you made your choice.

  
  

  Thanks in advance,

  Tom
  

  Tom,

  At this point, you're pretty much stuck to a GPU upgrade. You see, that the GTX 560 Ti is not is properly supported in first Pro CC 2015 when it comes to acceleration GPU of MPE. As such, you may experience random program crashes and/or repeated which are fixed only when you disable acceleration GPU of MPE and run first in software mode only MPE.

  The other improvements are out of the question: the i7 990 X CPU uses the chipset Intel X 58 now-seven-year-old, whose native Intel SATA ports are limited to SATA II (3 GB/s or 300 MB/s) flow. All support 3 SATA or USB 3.0 on motherboards that use such an old chipset comes entirely from complement third-party chipsets to companies such as NEC/Renesas and Marvell. And we know how slow the Marvell SATA 3.0 ports work are compared with native Intel SATA 3 implementation on newer chipsets. Unfortunately, a CPU upgrade would have exceeded the maximum budget $ 350 because both the CPU and motherboard (and probably RAM as well) should be replaced by such upgrade. And additional SSD upgrades are out of the question because newer SATA SSD would have been restricted by the sustainable maximum rate of 270 MB/s of SATA II.

  Therefore, the only feasible upgrade would be a new GPU for your system now five-years.

  Good luck in your quest to upgrade,

  Randall

• What would be the best approach to store the contents of an application

  Hi all,
  
  Whereas there are certain restrictions on the University Complutense of MADRID since the limit of files in a folder (max. 1000), that would be the best approach to store the contents of a request, for example? Is it possible to store the content with a logic of separation?
  
  Kind regards

  Maybe that I miss the question, but I think you are looking for a good definition of the metadata model or same good architecture of content server instances themselves.

  You wrote that you have lots of files from one application (1200 check-ins per day) and you are limited by the recommendation to have maximum 1000 files in a folder. It is a bit of a mix of apples and oranges. Records are a logical representation of file storage, who must somehow match what users a) are used for b) is useful to organizational processes. If it makes no sense in the context of your organization - just don't use them. At the University Complutense of MADRID, he must be. Unlike, the University Complutense of MADRID must always have a metadata model, and if the content search is one of your typical use cases, it is a starting point.

  You mentioned you want to separate an application an application documents X documents Y - that sounds like you have a metadata field called, for example, 'Application', which will contain the appropriate value. Unfortunately, you write more detail, so I'll make my scripts:

  -Imagine you have users who work areas or countries interested only in 'their' data - sounds like a need for one or more fields to represent this type of separation (country - State - City - whatever)
  -now, you might have another group of users who are more focused on the product; They also want to see 'their' data, but this time, the main search criteria are different (product line - product - Version - Batch, etc..)

  At the University Complutense of MADRID, you can serve both groups - you can create research and recording of profiles that meet the needs of these two types of users. It's actually more convenient than using the folders because you can have multiple views on the same repository.

  It is a "but" to this approach and that's if you want to use Desktop Integration after the check in documents from Office applications (Word, Excel). In this case, you will need records.

  However, even, there is a solution that might help: note that, so far, I expect to have a single repository (a single instance of the University Complutense of MADRID) serving all your applications. In theory, you could have a few instances UCM running in the same environment (the same number of licenses CPU, if you want). Therefore, the main criterion will be the name of the server instance of content rather than a metadata field. Another thing to consider if you want your "desktop users" for access to "all files" in the repository. Note that even if you use folders you can have files that are not assigned to any folder.

• Give advice on the best way to create tables

  Hello

  I'm just after the best method to create a pdf document that got charts?

  I have an order form which must be converted to an editable pdf form that users can fill in electronically and email back. Currently, the document is in Excel, and while I can convert it to PDF, I prefer to create the whole thing using the PDF.

  Should what tools I use for this?

  Kind regards

  Peter

  PDF files should not be created from scratch and if you try to do you will soon discover that it is extremely difficult and heavy.

  Stick with the creation of the file in Excel (or any other similar application, such as Word, InDesign, etc.) and then convert to PDF and add form fields in Acrobat.

  Be sure to keep a copy of the Excel file, well, in case you need to make any changes to the layout of the file later.

  If you don't do this then you can order replace Pages use in Acrobat to insert new pages (static) on the 'old' in your PDF file, that will keep all the form fields and scripts of tact. You need to just adjust the locations or the size of the fields, where this is necessary.

• Audit of the tables - what are the best ways to do so?

  Hi all
  
  DB version: 10g.
  
  Brief description of the problem: at the moment, I'm working on an application that has a java interface and oracle
  back-end. We have no access to the java code at all. So, it's a complete black box. . I was wondering, if I could go for a trigger level diagram to know which tables columns are altered on certain measures to the interface. Or, if I know the tables specifically, let's say A tab and tab B. I should go to a level trigger line on them, instead of going a
  schema level trigger. What approach will be the best? If possible, would you please point me to some code examples
  for each of them.
  
  Thank you.

  http://www.Oracle.com/pls/db102/search?remark=quick_search&Word=audit&tab_id=&format=ranked

• What is the best approach to take the content from another page... sampe App

  I need to access the values of the other page...... What will be the best method to her dowry...
  I thought to use the loading of the page...
  and development using plsql expression...
  as
  page load event
  PLSQL expression
  
  : P200_EMAIL
  
  element on the page to p200_email
  p103_email of the affected item.
  
  Now for some strange reason the contents of the p200_email field... that exist in page 200... Donot enter paeg 103......
  field p103_email...
  What will be the best method .or approach to retrieve the content...
  Any information will be greatly appreciated...
  
  Published by: pauljohny on September 11, 2012 12:08

  Question seem you too much, but my understanding is that you want to 'Access session values' in the Apex.

  In Apex, all elements of the page that is presented, and the session will be available in the session.

  example: If you have the page 1 and P1_NAME like a text field, and if you send the page, access to this to say page 2 P2_NAME to: P1_NAME & P1_NAME. v ('P1_NAME') etc. Then try this under P2_NAME default value setting, enter & P1_NAME. It has the value of P1_NAME to P2_NAME.

  Hope this helps
  JS

• Support for PIVOT query (or advice on the best way to do it)

  Hi gurus of SQL,.
  
  I'd appreciate any help you could provide on this request, I'm assuming that the best way to do this would be by using the PIVOT function. I read through some of the documents and books, and done some research here in the forums, but can't seem to find a way to make it work.
  
  I'm on Oracle 11.1.0.6.0 self.
  
  I have a table like this:
  

  ID     Product          Month_A_Amt Month_B_Amt Month_C_Amt     Month_D_Amt
  
  123     ProductA     3          5          7          9
  123     ProductB     2          4          6          8
  123     ProductC     10          11          12          13
  456     ProductA     1          2          3          4
  456     ProductB     3          4          5          6

  We get this data each month - Month_A is always the most recent month, and so it goes back for this game, Month_A is 09 November, Month_B is October 09, Month_C is Sept 09, etc. I'm OK with Hardcoding this value each month, so for the purposes of this exercise, just assume that Month_A is the 09 November, Month_B is Oct 09, Month_C is Sept 09 and Month_D is Aug 09.
  
  I need essentially "Pivot" in this table, so the end result looks like this:
  

  ID     Month          Product_A_Amt     Product_B_Amt     Product_C_Amt
  
  123     Nov 09          3          2          10
  123     Oct 09          5          4          11
  123     Sep 09          7          6          12
  123     Aug 09          9          8          13
  456     Nov 09          1          3          null
  456     Oct 09          2          4          null
  456     Sep 09          3          5          null
  456     Aug 09          4          6          null

  Here's the SQL code to create the database with test data table. Now that I've typed this explanation, it still seems easier that I had done it to be... but I'm still confused, so any help is greatly appreciated, thank you!
  
  create table test_base_table)
  Identification number,
  Product varchar2 (20).
  Number of Month_a_amt
  Number of Month_b_amt
  Number of Month_c_amt
  Number of Month_d_amt);
  
  insert into test_base_table values (123, "ProductA', 3, 5, 7, 9);
  insert into test_base_table values (123, "ProductB", 2, 4, 6, 8);
  insert into test_base_table values (123, "ProductC", 10, 11, 12, 13);
  insert into test_base_table values (456, 'ProductA", 1, 2, 3, 4);
  insert into test_base_table values (456, 'ProductB', 3, 4, 5, 6);
  
  Published by: TheBlakester on February 10, 2010 19:56

  Hello

  You don't want to make several clauses UNPIVOT and PIVOT; you want to do several sets of columns in a cluase PIVOT and UNPIVOT one clause.

  In the UNPIVOT clause, it's just a matter of replacing the unique "amt" column before the keyword FOR with a list in parentheses '(amt_1, amt_2)' and the replacement of each column in the list (for example, "month_a_amt") with a list of the same length ("(month_a_amt_1, month_a_amt_2)" ").
  In the PIVOT clause, it's just a matter of replacing the unique "SUM (amt)" aggregate function with a list of unparenthesized of functions, each with an alias ("the SUM (amt_1) AS amt_1, SUM (amt_2) AS amt_2'. The alias that will be added at the end of the givien for names output column in the IN clause.

  SELECT       id
  ,       TO_CHAR ( ADD_MONTHS ( TO_DATE ( 'Nov 2009'
                                          , 'Mon YYYY'
                            )
                        , month_num
                        )
              , 'Mon YYYY'
              )          AS month
  ,       product_a_amt_1
  ,       product_a_amt_2
  ,       product_b_amt_1
  ,       product_b_amt_2
  ,       product_c_amt_1
  ,       product_c_amt_2
  FROM       test_base_table
  UNPIVOT       ( (amt_1,         amt_2      )     FOR month_num IN (
           (month_a_amt_1, month_a_amt_2)     AS  0,
           (month_b_amt_1, month_b_amt_2)     AS -1,
           (month_c_amt_1, month_c_amt_2)     AS -3,
           (month_d_amt_1, month_d_amt_2)     AS -4              )
         )
  PIVOT       ( SUM (amt_1) AS amt_1
         , SUM (amt_2) AS amt_2 FOR product IN ( 'ProductA' AS product_a
                                                      , 'ProductB' AS product_b
                                     , 'ProductC' AS product_c
                                     )
         )
  ORDER BY  id
  ,            month_num     DESC
  ;
  

  Output:

  .              PRODUCT  PRODUCT  PRODUCT  PRODUCT  PRODUCT  PRODUCT
    ID MONTH    _A_AMT_1 _A_AMT_2 _B_AMT_1 _B_AMT_2 _C_AMT_1 _C_AMT_2
  ---- -------- -------- -------- -------- -------- -------- --------
   123 Nov 2009        3        9        2        9       10        9
   123 Oct 2009        5        9        4        9       11        9
   123 Aug 2009        7        9        6        9       12        9
   123 Jul 2009        9        9        8        9       13        9
   456 Nov 2009        1        9        3        9
   456 Oct 2009        2        9        4        9
   456 Aug 2009        3        9        5        9
   456 Jul 2009        4        9        6        9
  

  It looks like all the new values of amt2 are 9. Don't you think it's the best test? I think that different numbers, as you used for the examples of previous data, reduce the chances of getting good results purely by chance.

  If you want to experiment with queries like this, I suggest you use "SELECT *" (nothing added) in the SELECT clause. Start with just an UNPIVOT operation. Some examples in the documentation to do a TABLE CREATION AS... to save the results of an UNPIVOT operator and use this table as the base for a PIVOT table. I think it's a good idea to reduce confusion.

• What is the best approach for a same code used for 16 test stations

  I write code for 16 testbeds that are all the same, except that different circuits CAN are used, i.e. CAN0 through CAN15. The approach that I plan to use is 16 screws, one for each test station executes independently and in parallel, meaning that they can be stopped and started at different times. Each of the 16 screws have about 10 complex subVIs that are all the same. Even if I do not use uninitialized shift registers, I wonder if there is no advantage to using a reentrant approach, or even if it works for my application. Any suggestions are appreciated as I have no experience using the reentrant approach.

  Thank you.

  First of all, you should get used to use projects. They are very useful. If the code is in a project, you can open the VI from there.

• Need advice on the best way to set up a 6 nic Server

  I have a server with 6 cards.  Looking for some suggestions on the best way of provision.  We use the software iscsi client.

  Here's what I think to do:

  0/2 NIC (one onboard and a pci): VmNet

  1/3 network interface cards (one on board and a pci): vmkernel: vmotion/service console

  approx 4/5 (pci): vmkernel for software iscsi

  Is there a better way to do it?  It's just the way I'm used to doing.  It would be nice to maximize the number of ports used for iSCSI.

  Thank you!

  -shane

  Tough call...

  If you lose the management network, HA will cause a failover.

  If you lose the iSCSI, all virtual machines fail, but HA will not switch.

  If you lose VM network, all communications from the virtual computer fail, but HA does not tip over.

  If it was me, HA failover is a better option than full scall VM failure or net VM...

  But now, you will get twelve opinions on which is better.

  Dave Convery - VMware vExpert 2009

  ************************

  Accomplish the impossible only means that the boss will add it to your regular tasks.

  Doug Larson

• I have a column of the table where I want to apply box, what is the best approach?

  Mr President.

  My worm jdev is 12 c. (12.0.3.0)

  I have a table column and want to default on every insert I have check box selected.

  "DED_WHT" VARCHAR2(1) DEFAULT 'Y', 

  How to apply?

  Concerning

  Drop the DedWht attribute of the DataControl and select ADF select Boolean Checkbox

  

  When the following dialog box appears, choose selected state value of Y:

  

  Finally, go to the display attribute and the literal value for Y:

  

• Link to information from tables and display the 'best '.

  Hello! I'm totally new to this great software, and the truth is that I lost D:
   
  I try to explain in more detail what I have to do, I hope you can help me please it is urgent T_T

  I do 3 tables must be related to each other, that is to say a table where a username will be manually enter, another where you manually enter the user name and the third which will automatically enter power of each user (for automatic writing, I'll use random data). Each table will have a box number, for example:
   
  Table 1, box 1: Paul
  Table 2, box 1: door
  Table 3, box 1: 3.74
   
  Table 1, box 2: Miguel
  Table 2, box 2: Ramos
  Table 3, zone 2: 4.99
   
  Table 1, box 3: Maelle
  Table 2, area 3: Branco
  Table 3, case 3: 4.98
   
  I mean, I bind the box to one table with the other three. And because the program must compare the data in table 3 (power) and display the data of the user of best (which has the highest power). In this example, the program should appear:
   
  BEST USER:
  NAME: MIGUEL RAMOS
  POWER: 4.99

  (Is not slender record information when I close the program)

  I don't know if I ask you very much, I have a very clear idea in my head of what I have to do, but being a new software for my not know how to implement it.

  Thank you in advance for your quick response and help and ilustrative! xD

  Have you tried something with the basic understanding of your question check if this is what you need?

  -Still not clear what you mean by table? (In my opinion, the table is 2d array of values here, otherwise please let me know.)

  -C' is the reason why I asked you to show your code you did then it will be clearer.

• Advice on the best way to transfer information from the old laptop again.

  Please could you offer me advice, I bought a new laptop and want to transfer everything from to the old laptop, any advice would be grateful. Thank you James

  Please could you offer me advice, I bought a new laptop and want to transfer everything from to the old laptop, any advice would be grateful. Thank you James

  Transfer files and settings from another computer
  (This is a web link, click on it.  There is even a video.)

  PS - you install your applications (office suites, alternative web browsers, customers of messaging, plugins, games, etc) manually using the installation media and you SHOULD do before using the Windows Easy Transfer Wizard.

• Best network design... Need advice on the best use of NIC

  I'm new to the concept of Distributed Switch so I need advice.

  Our current environment is the result of a vCenter 4.1 and ESXi 4.1 Enterprise Plus, but we are just using the standard vSwitch (1 for vMotion/Console and 1 for virtual machines).  When the distributed switch came out, we were warned that a vDSwitch could cause us problems if the server vCenter or database is down.  We could not connect directly to the host and make network changes because the vDSwitch is set in the database.  That's why we stayed with the Standard vSwitch only.

  Our farm is quite small, only 5 hosts but we run around 100 mV in this regard.

  We use currently servers HP DL385 G7, which have 4 cards integrated network, and we have a map of installed NETWORK 4 port card.

  I use the NETWORK 4 EtherChannel ports and trunk card to our virtual machines.

  I am currently using only 1 network card integrated for vMotion and 1 for the Service Console and they all have two of the other defined as secondary.

  This configuration has worked very well for us, but I realize that the latest version of ESXi has some new features that we could use.

  NEW CONFIGURATION

  I'll put up a new vCenter 5 and ESXi 5 environment and I am considering using the switch distributed instead of the usual vSwitch we use.  I'm also eager to take advantage of the multiple NIC vMotion.  All our cards are 10/100/1000 MB capable... No. 10 GigE.

  I think... use that map 4 NETWORK ports for my EtherChannel/trunk for just as our virtual machine before, but this would be set to vDSwitch1

  The mixture of my 4 other integrated ports, it's causing me grief.  Should they be on a standard vSwitch or vDSwitch?  Use 2 ports for vMotion and 2 for the Console?  I really thought to use 3 ports for vMotion and 1 Console port.  I could put the Console port to use one of the vMotion ports such as adapter of standby is... I'm so confused freaking!

  Any recommendations on how I should put up?

  Hello

  Given that you can't split your vmnic for each vSwitch I would recommend either keep configuration simular with the knoweldge if a whole nic fails, you will take a failure or as autumn has already been mentioned on 'Origin Port ID'. Lets do this out and give a little better example

  Current configuration

  vSwitch0

  VMNIC0 - NETWORK interface integrated - Service Console

  VMNIC1-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC2-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC3 - NETWORK interface integrated - VMotion (eve of Console of Service) (different IP or VLAN?)

  vSwitch1

  VMNIC4 - extension PCI NIC - Etherchannel trunk - PortGroup - VMNET

  Extension VMNIC5 - PCI NIC Etherchannel trunk-PortGroup - VMNET

  Extension VMNIC6 - PCI NIC Etherchannel trunk-PortGroup - VMNET

  Extension VMNIC7 - PCI NIC Etherchannel trunk-PortGroup - VMNET

  Now, to captured to eliminate any single point of failure that you could do is break your Etherchannel trunk and back this vSwitch from Port ID and Setup VMNIC2, VMNIC3, VMNIC4, VMNIC5 as vSwitch1 for your VMNET. Then the cable to multiple switches eliminate any single point of faiulre. If your standard configuration would look like this

  vSwitch0

  VMNIC0 - on - Board Service Console

  VMNIC1 - Board - Vmotion

  VMNIC6 - extension PCI NIC - Vmotion

  VMNIC7 - extension PCI NIC - Vmotion (standby Service Console)

  vSwitch1

  VMNIC2 - VMNET

  VMNIC3 - VMNET

  VMNIC4 - VMNET

  VMNIC5 - VMNET

  So to finish any request for psyhical nics on this particular configuration the Port ID of origin essentially around robins. If during your first VM is online it will be use VMNIC2 and nic forever, until a failure, in which case he will grab the next nic online. When your second VM is online it will use VMNIC3 forever, until a failure and so on. This still will give you around the same way through to as far as networking is concerned. However if you are attached to the trunk, etherchannel 4 GB and can obsorb a failure in case of failure, the network card 4 ports can stay.

  Distributed switching Setup

  Allows you to see how you can switch to distributed switching

  Let's start first of all, you can have EVERYTHING in switches distributed even the service console port if you wish. The resason why some people do not like to do this with the service console port is because IF your database is broken you cannot make any changes to the distributed switch. However it will not prevent a feature to your distributed it switches simply means, you can change them. Also if just getting worse and your DB has been declining for some time and you REALLY need to make a change to the service console port you can go into the console and change back to a standard vSwitch if need be. This allows the said look at some standard configs, you can work

  vSwitch0 (Standard)

  VMNIC0 - Service Console Port (Port Original ID or standby)

  VMNIC4 - Service Console Port (Port Original ID or standby)

  vSwitch1 (Standard)

  VMNIC1 - Vmotion

  VMNIC5 - Vmotion

  Distributed switch

  VMNIC2 - VMNET

  VMNIC3 - VMNET

  VMNIC6 - VMNET

  VMNIC7 - VMNET

  Now this config using originating port ID and breaks your etherchannel if you want to keep your configuration with the etherchannel it can look like this

  vSwitch0

  VMNIC0 - NETWORK interface integrated - Service Console

  VMNIC1-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC2-Onboard NIC - VMotion (different IP or VLAN?)

  VMNIC3 - NETWORK interface integrated - VMotion (eve of Console of Service) (different IP or VLAN?)

  Distributed switch

  VMNIC4 - VMNET

  VMNIC5 - VMNET

  VMNIC6 - VMNET

  VMNIC7 - VMNET

  Other changes to the configuration may also put the vmotion in distributed witch the VMNET but you would to VLAN, or you could create a second Distributed switch and put it as long as there are 2 network cards. It can go either way. The main advantage of a distributed switch is that it brings all of your settings with you in any host. So trade ect all your VIRTUAL networks is really easy to reproduce if a new host is brought online, all you have to do is to add the new host network cards in the distributed switch and your config is done. With that in mind lets look at the service console. This console is always configured on EACH Setup program that out you of the box if not that you really need to have these parameters transported on several hosts that is another reason why most people just don't. VMotion is up to you, I have seen and configured two ways, it all depends on how simple you want to keep it or think of switching / vlaning / port of groups.

  If you have any questions please let me know, I hope this has helped