Value at the bean do not reset on the valuechange listener appeal.

Similar Questions

• Reset some values at the beginning, not all

  I plan to take some action and I use a large number of orders/lights. I want to reset most of the defaults at the beginning of the program and at the end I have 3 values that a user enters the program to start and I need to keep these values for later in the program, I can not reset them. Is there a simple way to do this? I can't use the 'reset all fail them. " Currently, I have all of the values, except for the 3 user, the default entries at the beginning of the program using local at the beginning of the program variables. But it seems dirty and I don't want to do the same thing at the end of the code.

  Or you can use something like this:

  

• 11.1.2.3 JDEV get the selected value of RichSelectOneChoice at the bean (but not in the value change listener)

  We have implemented our own listener of downloading files to export the table data in Excel. The reason for this was that we did not want certain columns to export.

  We have the collectionmodel table. All columns have been extracted from the table and for each column the value inside the component was read and written in the outputstreamwriter.

  Now the problem is, we have a few selectonechoice fell in the columns of the table read-only. For components, it exports the data that the index selected and the value selected.

  Is it possible that I can get the selectedValue of the component of type RichSelectOneChoice in the bean?

  We use Jdev pointers 11.1.2.3... Any are appreciated...

  Found the solution. Add LOV VO as iterator in a combination to page and access it as below... use index that selectonechoice.getvalue returns as well as the name of the iterator.

  BindingContainer links is BindingContext.getCurrent () .getCurrentBindingsEntry ();.
  DCIteratorBinding dciterContainer = (DCIteratorBinding) bindings.get (iteratorName);
  Ri rank = dciterContainer.getRowAtRangeIndex (index.intValue ());
  String val = (String) ri.getAttribute (attrName);

• I'm not able to use the keyboard to type negative values in the mode of developing LR6. Whenever these negative values are reset to zero. Can someone help me?

  I use LR 6/CC 2015.

  Whenever I type in a negative fashion develop it is reset to zero after entry or tab.

  I type in positive values remain and are not reset to zero.

  In older versions of Lightroom, I had no such problems.

  I have an iMac 27 with Yosemite 10.10.3.

  Hope someone knows how to fix this annoying problem.

  Your LR is configured in one language other than English?  If so, this is a known bug.  See the remark made by Simon Chen employee under this post (you need to click on see more reviews to actually see): 6 Lightroom: Bug of negative values (in German).   The comment includes a workaround solution that is to edit a text TranslatedStrings.txt.

• How to the value of the factor of reset when you reset the system.

  Hello

  I am facing a problem regarding to reset the value of the attached VI factor.

  I used 4 button Start, okay, save, stop.

  In what initially vi application set the value of the factor, then press start and reading will vary and then press OK, then reading is added to the matrix table.
  Second reading again press start and measure reading and then click OK to add to the table.

  After some reading when I press the button Save sound save any reading of txt file and reset all the vi but its not able to reset the value of the factor.

  How can I reset the value of the factor also after pressing the button Save.

  I know his side out of the whileloop here then it is not possible to reset in this case, I tried to put it in the while loop, but I have no success.

  Please guide me.

  Thank you very much.

  Oh, sorry about that... it was out of my mind...

  Thank you.

• I pressed the reset button default values during the installation on Officejet 4620 navigation all in one.

  I pressed the reset button default values during the installation on Officejet 4620 navigation all in one, now I can't connect to my wireless network. My router is a box of phone company that I do not have access to. Any help?

  Oh, sorry.  Make sure the USB cable is NOT connected when you run the software or it will assume that you want a USB installation.  It will ask you which type of installation desired and, of course, choose wireless.

  Later you will be asked to plug a USB cable.  Wait until he asked.

• To access the values of the Atrributes VO at the bean object

  Scenario is,

  I have two attributes in the original Version, but I want to access the values of attributes, I can get the values of Vo using vo, getAtrribute (), but I want to access the values of the attributes when the user will enter new values, I want access to a new value to manage the bean to handle.

  I dropped VO as a form on the Page

  Version: Release 11g Jdev 2, 11.1.2.0.0

  Zaid

  You tell me that after 30 answers, it's not good

  and it is a totally different matter, then you need to open a new topic for each new question (ignore this time but remember)

  As you say that annual is the primary key in the primary table, then obviously you want to sink it is the current value in the child records, why you need the next sequence number to add detail records?

  Anyway check this box

  Immerse yourself in Oracle: get the next value in the sequence in ADF

  Ashish

• How to get the values of the table of the ADF to bean class?

  Hi all

  My 11.1.1.6 Jdev

  Here I do not use BC ADF in my project.  I'll put values in the ADF table with bean.

  In the table, I put a checkbox. When I selected (Checkbox) a few rows in table and submit. In the submit method, I want to get all the values of line checkbox selected in my bean class.

  How can I get the values. ???

  Here my table UI code

  < af:table var = "row" rowBandingInterval = "0" id = "t1" value = "#{pageFlowScope.BinderSolutionsBean.uiBinderProperties} '"

  styleClass = "AFStretchWidth" emptyText = "no record found".

  Binding = "#{pageFlowScope.BinderSolutionsBean.binderTree}" >

  < af:column sortable = "false" headerText = "Script ID" id = 'c4' >

  < af:panelGroupLayout id = "pgl4" >

  < af:selectBooleanCheckbox id = 'sbc1' > < / af:selectBooleanCheckbox >

  < af:spacer width = "5" / >

  < af:outputText value = "#{row.scenarioId}" id = "ot5" / > "

  < / af:panelGroupLayout >

  < / af:column >

  < af:column sortable = "false" headerText = "Quote ID" id = "c1" >

  < af:outputText value = "#{row.quoteId}" id = "ot4" / > "

  < / af:column >

  < af:column sortable = "false" headerText = "NASP ID" id = "c2" >

  < af:outputText value = "#{row.naspId}" id = "ot2" / > "

  < / af:column >

  < af:column sortable = "false" headerText = "GCH ID" id = 'c3' >

  < af:outputText value = "#{row.gchId}" id = "ot3" / > "

  < / af:column >

  < af:column id = "c6" headerText = "Term" >

  < af:outputText value = "#{row.term}" id = "ot9" / > "

  < / af:column >

  < af:column sortable = "false" headerText = "Status" id = "c5" >

  < af:outputText value = "#{row.status}" id = "ot6" / > "

  < / af:column >

  < / af:table >

  follow some above recommendation such as the creation of additional attribute. You will also need the key in your collection, while making the data for your chart.

  You must write a custom selectionListener. On valueChangeEvent of box, get the key of a line and add the line at the bean.

  Maybe it's little help for you

  https://tompeez.WordPress.com/2012/01/22/jdev-custom-SelectionListener-for-viewobjects-in-rangepaging-mode/

  How to get the selected row in a table no-bind ADF

• How to extract the values of the line full in the bean to support using the primary key

  Hello

  I have a table that has columns as plant_name, business planner email id and identification of email resident engineer. Here, Plant_name is the primary key.

  Now, I have this plant's name slipped and dropped like selectonechoice (drop) on page jsff. In this user can select any name of 1 plant drop down.

  Right now, I can go get plant in backing bean name, but I can't understand how business plan for extraction and identification of email of the engineer resident in this key primary-plant_name at the bean to support.

  Please let me know if anyone has an idea in this regard.

  JDeveloper version 11.1.1.6.0

  Thanks in advance.

  Sneha

  Sneha211 wrote:

  On the jsff page

  required = "#{bindings." Plant.hints.Mandatory}.

  shortDesc = "#{bindings." Plant.hints.ToolTip}.

  ID = "soc1" unselectedLabel = "- Select -"

  autoSubmit = 'true '.

  Binding = "#{backingBeanScope.backingbean.plantbean}" > "

  ID = "si1" / >

  In backing bean

  DCBindingContainer = lBindingContainer

  (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  DCIteratorBinding lBinding = lBindingContainer.findIteratorBinding("SupplierVO1Iterator");

  NewRow row = lBinding.getCurrentRow ();

  String aamplant1 = (String) newRow.getAttribute ("Plant");

  Hi Sneha, you've written code for it

  you have found the current line and the primary key then this line, then why you not not using this same rank to get the other attributes?

  NewRow row = lBinding.getCurrentRow ();

  String aamplant1 = (String) newRow.getAttribute ("Plant");

  String businessPalnner = (String) newRow.getAttribute ("business_planner"); Returns the value of the same line
  

  Engineer in String = (String) newRow.getAttribute ("engineer");

  
  

  OR if your condition is like that-

  you have a primary key field value, but you do not have the corresponding line, then you can get that line and it's attribute by using the primary key value

  See - http://adfgouravtkiet.blogspot.in/2012/10/filtering-of-data-from-vo.html

  Hope it helps

  -Ashish
  

• Could not access the value of the component off ValueChangeListener

  In many cases, I need to use the value of some UIComponent during execution in many places in the application. But the problem is that I could not access the value of the component outside the ValueChangeListener of this component. I tried to store this value in a temporary local variable, I also tried to use the opportunity to link , but it did not work.

  This thread changes made on the ValueChangeListener can't think where else
  

  said I should go ahead everything in the ValueChangeListener but is not useful in my case and it's really limit my choice later.

  So question is: How to access the value of the element external ValueChangeListener?

  I use Jdeveloper with ADF 11.1.2.3 technology

  Hello

  You can create a bean (depending on the application, choose the scope), add a variable with accessors and then use it in the 'value' property of the component.

  Arun-

• Select multiple choice based on the data control does not not value in the correct form

  Hello, I am using JDeveloper 12.1.2

  I made a choice of several select based on an attribute of the year to a data control and I have a method in my managed bean that retrieves the selected values in the select choice of many, and on the basis that I want to do some queries, but the value that returns the selection is not the value of the attribute is the value of memory (or what is the correct value name..)

  Here is the code:

  < af:selectManyChoice value = "#{bindings." Label AnoList1.inputValue}' = 'Ano '.

  ID = "smc1.

  valueChangeListener = "#{OBIEE_managed_bean.» AnoListSelection}.

  autoSubmit = 'true '.

  Binding = "#{OBIEE_managed_bean.anoListBinding} '"

  immediate = "true" >

  < f: selectItems value = "#{bindings." AnoList1.items}"id ="si1"/ >

  < f: validator binding = "#{bindings." AnoList1.validator} "/ >"

  < / af:selectManyChoice >

  Managed bean:

  public void AnoListSelection (ValueChangeEvent valueChangeEvent) {}

  valueChangeEvent.getComponent () .processUpdates (FacesContext.getCurrentInstance ());

  try {}

  System.out.println ("Valor link yearChoice:" + anoListBinding.getValue () m:System.NET.SocketAddress.ToString ());

  ...

  The output is as follows:

  Valor link yearChoice: [Ljava.lang.Object;@4939cade

  Year: Ljava.lang.Object;@7135da60

  This normally happens when the toString is not defined, but how I have to fix this? Someone at - it had the same problem? Any advice?

  Kind regards

  Frederico.

  Hi Frederico

  I'm fine hope you are too.

  Sorry, but you can try

  {for (Object item: (Object []) {valueChangeEvent.getNewValue ())}

  System.out.println (Item.ToString ());

  }

  This should give you something.

• LOV in richeTableau resets the value after the deletion of rows from the table

  Hello. I'm on 11g R2

  I have a table with columns in the box and a button in the toolbar that removes the lines checked

  I have build it based on the following article in her string code

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/index-101235.html

  
  

  When I run the "delete" button I execute the following code (taken as is article)

  
  

  public void deleteSelectedRows() {}

  create a second line, the value do not affect all lines

  used in ADF

  Set of rows duplicateRowSet = this.createRowSet ("duplicateRowSet");

  first row to avoid "the attempt to access the value of lines."

  exception line was dead.

  duplicateRowSet.first ();

  retrieve the current row of the table for after

  re-running the VO

  Line currentRow = this.getCurrentRow ();

  Boolean currentRowDeleted = false;

  get all rows that have the transoent attribute

  "MarkForDelete' set to true

  Row [] rowsToDelete =

  duplicateRowSet.getFilteredRows ("MarkedForDelete", true);

  If (rowsToDelete.length > 0) {}

  run only throizgh this code, if there is something to

  delete

  for (line rw: rowsToDelete) {}

  If the row is marked as the current in VO, ts value

  Boolean flag

  If (rw.getKey () .equals (currentRow.getKey ())) {}

  currentRowDeleted = true;

  }

  remove the line - do not yet commit

  RW. Remove();

  }

  rerun VO

  this.executeQuery ();

  reset the current line if it has not been removed

  If (! currentRowDeleted) {}

  this.setCurrentRow (currentRow);

  }

  duplicateRowSet.closeRowSet ();

  }

  }

  "MarkedForDelete" is a transient attribute used to mark the line delete

  The lines are removed very well.

  The problem is with lines that I do not delete.

  For example I LOV column. I chose the value LOV in a few lines, and after that choose to delete several lines (not the same lines where I modified the LOV) but some other lines.

  After I click "delete", the lines that I marked to remove deleted indeed, but the value of the LOV in other rows (I have not scored for delete) are disabled.

  How to preserve value LOV so it will remain also after I deleted some lines?

  P.S. I've tried autosubmit = "true" - it did not help

  It is expected because I see that you rerun the query.

  Once you re - run, it retrieves from the database again. Thus, your values are lost because they are not posted.

  I don't think that run query is necessary, try to have a programmatic part trigger on the table after you remove all of the lines.

  Thank you

  Alisson.

• How to transfer values to the popup while the bean in application scope?

  Hi all

  I use JDeveloper 11.1.1.4

  My scenario is that I have a < af:popup > with a component of < af:outputText >.

  I need pass values of output text dynamically according to the scenarios.

  My grain of support is application scope . So I'm not able to pass values using get and methods.

  My Design as,

  < af:popup id = "p1" contentDelivery = "lazyUncached" >

  < af:outputText value = "#{managedBean.getDynamicText}" id = "ot1" / > "

  < / af:popup >

  Now I run the application I'm not get all values in text during debugging output, I am able to set the value, but it didn't reflect on the page.

  How to transfer values to the popup while the bean in application scope?

  Thank you...

  At the bean, why don't you set the value to a variable pageflowscope and point the outputtext popup to the pageflowscope variable?

  () .getpageflowscope, set AdfFacesContext.getCurrentInstance ("nomvar", value);

  
  

  Thank you

  Alisson
  

• set the value of the objects of beans in other grains

  Hello

  I have a scope session bean "mySessionScopeBean". This bean, I have a string value.

  Now how to set its value to other beans.

  I searched and found this stufff code for value:

  	Map < String, Object > viewScope = AdfFacesContext.getCurrentInstance () .getViewScope ();
  	String username = (String) viewScope.get ("userName");

  is this real code?

  is this real code?

  Well tried?

  Session scope is obviously different in sight, you can not use this code.

  Instead, you can try with:

  MySessionScopeBean yourBean = (MySessionScopeBean) ADFContext.getCurrent () .getSessionScope () .get ("mySessionScopeBean");

  String username = yourBean.getUsername ();  of course, if you get accessor for the username attribute.

  Dario

• A search criterion and the result as a table in the header. Wanted to bind the result table to bean to access the value of the key

  The search criteria and the result is displayed in the table in a group header.  I want to get the value of the selected row and analyze the value of Vo in the next page for a variable binding. So I need to manage the value biniding to the bean tbal, but there is no option to bind the table to a bean. So, how can I get the selected value.

  Kind regards

  K M Krishna.

  First tell us your version of jdev, please.

  to get to the selected line you need not to link the table to a managed bean. You can for example drag the necessary attributes of the VO on the page and drop them as components of a inputText. the framework then generated the attribute bindings and sets the values of the current row for them. As you do not really need the inputText elements switch to source view (! it is essential!), then remove them. This will eliminate the Visual component, but attribute bindings are stored.

  Know you can access the values through their EL or as you get the value of an attribute via it's mandatory.

  Timo