Value of default field after losing focus

Similar Questions

• Asking value of text field after the application of the stamp

  Hello

  I use forms to create a stamp personalized with Acrobat Pro XI

  However, I need to enter a value in a text field after (or during)

  in placing the stamp.
  With my current 'solution' (calculation of the value of a text field with: event.value = app.response ("enter a string of text"));

  He asks only entry when I open tone (which is pretty useless, obviously).

  I hope someone can help me here, I'm a little lost.

  You should read this tutorial and post again if you get stuck: http://acrobatusers.com/tutorials/print/dynamic_stamp_secrets

• Assign a value by default when you navigate to a field.

  Dear all,

  How can I assign a value by default when you browse a field? What triggers to use?

  Karthik Perumal

  Hello

  You have the wrong forum. Close this message, and then open a new forum of forms:

  Forms

• Copy the default value from another field in the same page

  Hello

  I need to pass a value from one page to another page and I want to use this key as DEFAULT VALUE for a field.

  If I create a form tabular all it's ok, but if I create a normal page. I am not able to do that.

  1. 1. I call the page and I pass the value. I also have a FIELD of VIEW and I can see the correct value.
  2. 2. I create a field with attributes of this:
     1. a. source > Source = database column type
     2. b. sources > Source value or expression = FK_ID_DA (the column name)
     3. c. default > default = P27_PK_ID_DA (the field that contains the value)
  3. 3. on the screen, I see P27_PK_ID_DA and not the value

  Where is the error?

  Thank you very much

  TexasApexDeveloper wrote:

  You missed one: before the variable, without it, the default value is the string...

  Not sure that you can READ the other pages... Such that if you are on Page 27 and have a field that you want to use on page 30, page 27 is presented and its items in session state, you can 'see' on page 30.

  So, if you set the default value: P27_PK_ID_DA, then you should get by default, you are looking for...

  Only if the default value Type is set on the PL/SQL Expression. If the literal value "P27_PK_ID_DA" is seen then the Type of default value should currently be set static text with Substitutions of State of Session, in which case the value of session state must be referenced using the syntax of substitution string:

  &P27_PK_ID_DA.

• Check in the default field value

  Hello! I'm checking in documents using the TELL and title is populated by file name, its fine I also filled content of file name ID this field too! How can I do?

  You can use (International) rules or filter values by default - see for example DynamicPrefix (filter) component in HowToComponents: http://www.oracle.com/technetwork/middleware/content-management/index-092832.html

  However, be aware that the content ID must be unique; in other words, if you check in the file with the same name twice, it will reject the second file.

• Default value for the field in the report updated

  I am using an update report (form-> tabular). When I add a new line to a new record, I need set automatically one of the fields in the new record to a value of element. I don't want the user of having to hand enter this field (this is a foreign key to a related table iD). How can I set the value of this field in the new row when I click on the "add a line"?
  
  I hope the question makes sense!
  
  Thank you
  John

  John,

  You wrote

  When I add a new line to a new record, I need set automatically one of the fields in the new record to a value of element.

  Under report attributes > column attributes see the attributes of tabular form

  Default type element (application or name of the item page)

  The value default to your point value name.

  Jeff

• Need to fill the value of the sequence in a field after insertion in the ofa page

  Hi all

  I have a custom OAF insert the page in do I have to fill out a sequence to a field value, once the data inserted with success at the table.

  so for this I followed the approach below.

  1 > created a database sequence.

  2 > java in the EOImpl of the file in the accessor method Set for their respective fields wrote code below.

  {} public void setContainid (numeric value)

  If (value == null) {}

  OADBTransaction t = getOADBTransaction();

  value = t.getSequenceValue ("XXXXX_CONTAIN_SEQ");

  }

  setAttributeInternal (CONTAINID, value);

  }

  But still, I'm not able to complete the sequence value for the field in my oaf page, please help me with that.

  Thank you

  Hello

  Write this logic to create the EOImpl method:

  public void create (AttributeList attributeList)

  {

  Super.Create (AttributeList);

  Transaction OADBTransaction = getOADBTransaction();

  ContID number = transaction.getSequenceValue ("XXXXX_CONTAIN_SEQ");

  setContainId (contID);

  }

  Sushant-

• Make the fields within a focusable VerticalFieldManager

  This should be rather trivial, but I can't get fields inside a verticalfieldmanager accept and behave focusable and allow the cursor movement is visible.

  I have a popupscreen. He has created with a verticalfieldmanager (code to follow).

  Inside that I need another manager of vertical field so I can view a list of fields in a section with scrolling and always allowed to display items at the top or at the bottom of the context menu without being invaded by the central list.

  After having none of the fields in the list has the focus.

  The environment is JRE4.5 + 8300 on the Simulator.

  Appreciate any comment. /Jeff

  Code for popup:

  public static class ScrollingPopup extends PopupScreen {}
  VerticalFieldManager innerFieldManager;

  public ScrollingPopup() {}
  Super (new VerticalFieldManager());
  innerFieldManager = new VerticalFieldManager (VerticalFieldManager.FOCUSABLE |) VerticalFieldManager.VERTICAL_SCROLL | VerticalFieldManager.VERTICAL_SCROLLBAR) {}
  protected void sublayout (int maxWidth, maxHeight int) {}
  int newHeight = (int) (Display.getHeight () * 0.5);
  Super.sublayout (maxWidth, newHeight);
  setExtent (maxWidth, newHeight);
  }
  };
  I tried with a VerticalFieldManager default, but it made no difference
  innerFieldManager = new VerticalFieldManager (VerticalFieldManager.FOCUSABLE |) VerticalFieldManager.VERTICAL_SCROLL | VerticalFieldManager.VERTICAL_SCROLLBAR);
  for (int i = 0; i)< 10;="" ++i)="">
  innerFieldManager.add (new LabelField ("item" + i));
  }
  Add (innerFieldManager);
  innerFieldManager.setFocus ();
  Add (new SeparatorField());
  Add (new LabelField ("label attached to the bottom"));
  super.onDisplay ();
  }
  }

  Sorry only looked at this briefly, but remember that the Blackberry does not focus on managers, he focuses on the fields.  It "scrolls" focusable field to the field focusable.  In this case, you add LabelFields loads, which are not, by default, the object of focus.  So I suggest you must make them active, or add some NullFields, that are focusable but no presence of the user interface.  I hope this helps.

• How autoinitialize controls to the value by default to run?

  Hi all

  I am trying to initialize the default values to controls just after the run button is hit. This only works if the control is loaded with default values before running. I am a frame and any kind of help will be really appreciated.

  Your VI is stupid. You must understand the data flow. Not sure if the control is going to write to the indicator, first, or if the case statement will run. What finally will you do with your program. I hope that you have some kind of while loop (do NOT use the continuous run button). Then the method would be just outside the loop and don't run once - no need an instruction box. You could also place inside the first State of a state machine.

• Reset the default printer after each print job.

  I wish that my printer to reassign the default printer after each print job.  I have a Hp LaserJet 1020 on my desk as my default.  Sometimes however, I print on our printer color etc.  Then when I go to print again immediately after the color printing - it is (and not my default).  I looked in the printer properties, devices, etc. - but do not see where I could update this?  Can you let me know.  Thank you.

  You don't say how you make that decision to change printers. I have two printers, all-in-one (default) HP4135 and HP6122 duplexer.

  Example: Leave in MS Office Word 2007 default print would always be. But I can choose a printer to use. With this selection, as long as I stay within this project, the HP6122 could be used. It would default to the HP4135 if I closed the project.

  If you go: start, Control Panel, printers, you will see all printers. The default value has a green check mark. Right-click on the printer icon and a menu descends with an extra function "Set as default printer".

• EditField aligned right... fields after do not appear

  I've been looking for a while and are still unable to find a solution to this. I read that the EditField uses the ENTIRE WIDTH, but in my scenario, I see not all fields after a custom EditField.

  The EditFields work/display well, but any field after appearing at all

  What I am doing wrong?

  Here is the class that contains my EditFields

  class FieldsManager extends VerticalFieldManager {}
  private int _width;
  private int _height;

  FieldsManager (int width, int height) {}

  Super(Manager.NO_VERTICAL_SCROLL |) Manager.NO_VERTICAL_SCROLLBAR);
  Super (0);
  _width = width;
  _height = height;
     
  Font ft_fields = Font.getDefault () .derive (Font.PLAIN, 16);
  _cityField = new EditField ("", _trip.getLOCATION () .trim () + "," + _trip.getCOUNTRY (), 25, Field.FIELD_RIGHT) {}
  Protected Sub layout (int maxWidth, maxHeight int) {}
  int myWidth = getMaxSize() * getFont () .getAdvance ("W");
  myWidth = Math.min (maxWidth, myWidth);
  Super.Layout (myWidth, maxHeight);
  }

  };
  _cityField.setFont (ft_fields);
  _reasonField = new EditField ("", _trip.getCUSTOMER () .trim (), 25, Field.FIELD_RIGHT) {}
  Protected Sub layout (int maxWidth, maxHeight int) {}
  int myWidth = getMaxSize() * getFont () .getAdvance ("W");
  myWidth = Math.min (maxWidth, myWidth);
  Super.Layout (myWidth, maxHeight);
  }
  };
  _reasonField.setFont (ft_fields);
     
  Add (_cityField);
  Add (_reasonField);

  }

  protected void sublayout (int width, int height) {}
  Field _editField;
  get the total number of areas falling under this Manager of
  int numberOfFields = getFieldCount();
  int y = 0;
  for (int i = 0; i)< numberoffields;="" i++)="">
  _editField = getField (i); get the field
  Are police = _editField.getFont ();
  EditField ef = _editField (EditField);
  int textWidth = Math.max (font.getAdvance (ef.getText ()), police
  .getAdvance('0'))
  + font.getAdvance(' ');
  layoutChild (_editField, textWidth, height);
  setPositionChild (_editField, width - textWidth, y);
  y += _editField.getHeight ();
  }
     
  setExtent (width, height);
  }

  public int getPreferredHeight() {}
  return _height;
  }

  public int getPreferredWidth() {}
  return _width;
  }

  }

  It is added to the main screen. All the fields added in the future do not appear... help?

  Check the values in your sublayout method using the debugger

• Scroll the VerticalFieldManger to see the full content of the message without losing focus on the AutoTextEditField

  I create the application such as chat window.

  I used VerticalFieldManager, AutoTextEditField and RichTextField.

  AutoTextEditField - tap the message.

  RichTextField - add the chat messages

  RichTextField is add in VerticalFieldManager.

  How to scroll the VerticalFieldManger to see the full content of the message without losing focus on the AutoTextEditField.

  Override navigationmovement. This is example how im using it.

  protected boolean navigationMovement(int dx, int dy, int status, int time)
   {
    if (dy==1)
      {
  

    int newscroll = mains.getVerticalScroll();
    int pageheigh = mains.getHeight();
      mains.setVerticalScroll(newscroll+50);
      invalidate();
    return true;  }
  

  return super.navigationMovement(dx, dy, status, time);}
  

  50. This is the step. This is very good work for me (but must create if newscroll <0 and="" if="" newscroll="">the field of cat yourmanager)

  area = VerticalFieldManager()

  Hope this makes you help.

  Best regards, Peter.

• How to read the values of the field of LOV disabled?

  Hi all

  I have a requirement, based on values that we entered one of the LOV fields, then we are arising from the new values based on the value that we entered this field of LOV. And then I must by default new LOV values derived in a two other fields of LOV and then disable them. Once the fields are disabled, then I'm not able to read the values using the pagecontext.getparameter... I get nothing when I tried to read using the pagecontext.getparameter.

  Pointers on how to read the values of disabled field/LOV?

  Thank you
  Clarriiza

  1. you already have values, and that's what you set in the LOV before turning off, right? So why do you need to recover again from the LOV.

  2. are you disabling or making it readonly? I think that if it is disabled, you might still be able to get the value using pageContext.getParameter.

  3 have you tried to get the handle to the LOV bean and get the value using lovBean.getValue (pageContext)?

  4. another Option is to combine the value of a FormValue Bean also (as well as the LOV bean) and retrieve it from FormValue.

  5 BTW, why are, why you're seen LOV if you disable it? Can't you just a TextBox?

  See you soon

  AJ

• ([JDev12c, ADF] 1) how to get the value of a field of the line currently selected in question 2) af:table: flowScope

  Hallo,

  How can I get the value of a field in the row that is currently selected in an af:table?

  I need to pass this value to a setCurrentRowWithKeyValue who took the record to display in another (by a button) called page:

  Limited workflow

  Page1 - goToPage2-> setCurrentRowWithKeyValue-> PAGE2

  I defined a managed bean flowScope for the workflow in which I created the variable 'CodeToSetPage2Row '.

  I will store the value of the field for the selected line in this variable so that I can move on to the setCurrentRowWithKeyValue.

  Could be this method OK? Ore is there any good practice to achieve this goal?

  The managed bean flowScope used to go to the stubborn task may take some values from the outside?

  The workflow defined will be executed in a dynamic region.

  Thank you

  Federico

  Federico, you cannot use a flow variable scope for this page. The region has no access to the bean. You must use a workflow for this parameter.

  To get an attribute of the currently selected line you make slide data vo of control on the page attribute. This will create a link attribute for this attribute. Once this link exists, switch to source mode and remove the component that you do not want.

  The framework passes the value of the current row in this affair of the attribute (table should be in single selection mode).

  Click on the button, you switch the binding of the attribute for the setting of task flow using a setPropertyListener.

  In the workflow, you call the setCurrentRowWithKeyValue with the parameter of workflow as the default activity.

  Timo

• Calculation No. Longer Works if a value in a field is deleted

  I have a question where a FormCalc calculation stops working if I delete a value in a field that is part of the formula.

  Here is a link to the test form: https://www.dropbox.com/s/3w6weyd3bp5dfss/Test_Totals.pdf?dl=0

  When I enter values in the table below, the calculation in the field of the CASH DUE EMPLOYEE works very well.

  

  If I delete the value in the field of the ADVANCE of FUNDS, the calculation in the field of the CASH DUE EMPLOYEE is not recalculated.  In the example below, I've removed the cash advance, so the EMPLOYEE DUE CASH should be $ 100, but yet the field is empty.

  

  This is the FormCalc script in the field of the CASH DUE EMPLOYEE:

  If (Table1.Row1.Total_E_Exp.rawValue > Table1.Row2.Cash_Adv.rawValue) then

  Cash_Due_Employee.RawValue = Table1.Row1.Total_E_Exp.rawValue - Table1.Row2.Cash_Adv.rawValue

  on the other

  Cash_Due_Employee.RawValue = 0

  endif

  I just can't understand why the field isn't recalculate after that I deleted the value in the field of the CASH ADVANCE.

  Any help would be appreciated.

  Thank you

  Not sure why FornCalc does not work, but the same logic works fine JavaScript.

  Check the form at the following link:

  Dropbox - Test_Totals2.pdf