Value of Oracle INV_SRS_ITEM_PAIR set of error report

Similar Questions

• Browser setting change error report

  Receive error browser setting changes every ten minutes.

  "An unknown change has been detected on your browser search settings" there are two options to check. 1. keep your current settings. 2. I am aware of the changes and approve it.

  I can select either option and then click on the Yes button, but the system is not responding. It won't let me close the window by clicking the X in the right corner. The only way to remove it is to close the window in the taskbar

  Tobbi,

  Thanks for the link to solve my problem. The problem was with one of the Add-ons. This is the toolbar that I thought that I had deleted, but felt that it was still active in the list of Add-ons. Deactivated, it solved the problem. I had deleted since.

  Roger

• Set the values of more than three per link report column

  Hello
  
  In my application, I need to put more than three points (on the target page), when you click on the column (it is a link) using the values present in this page.
  By report link column we can set only three values, y at - it another way to define several elements (plus three).
  Thank you
  Pavan Reddy
  
  Published by: user10820560 on March 17, 2009 13:28
  
  Published by: user10820560 on March 18, 2009 08:24

  Just enter several element names and values separated by commas in each input field for name/value of an element.

  Scott

• Need help with an error report

  It is an error to a VI report which normally crashes with the error, the default checking in the configuration of the LCFN VI attached dialog box. Impossible to debug it when it crashes; LabWindows CVI rises to debug but CVI crashes too.

  The attached error report was available only after you set to "No. Error Checking" error checking.

  Any ideas what is happening with this DLL function called by the LCFN?

  Platform: Windows 7-32 + LV2013 Pro SP1-32.

  Jeff

  Jeff,

  I think those KBs are what you were talking about.

  http://digital.NI.com/public.nsf/allkb/7253D2F0D91F68058625752F005AB672?OpenDocument

  http://digital.NI.com/public.nsf/allkb/D84C9775ABD921CF8625772A005CA50C?OpenDocument

  The typical setting for this crash to switch from C to StdCall. How is the value of the function disabled?

  Can you post this free dll (or link to it) so that we can try to reproduce the problem?

  -Connor

• When you use Igrabber, back on the error report. How can I fix it?

  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.
  This is part of the error report.
  
  For example:
     
  
  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.
  Hi ToddJambi,
   
  Turn on debugging and check if it helps fix the problem.
   
  For more information, see:
  The just-in-time debugging
   
  If that doesn't work, post your request in the MSDN Forums for assistance.

• Oracle of data insertion error

  Hi all
  
  I pulled the following create statement in Oracle database
  
  CREATE TABLE S_ETL_DAY)
  Stamp DAY_DT,
  CAL_MONTH int,
  Int jour_du_mois,
  DAY_NAME char (12),
  Int DAY_OF_YEAR,
  Int DAY_OF_WEEK,
  CAL_WEEK int,
  MONTH_NAME char (15),
  CAL_YEAR int,
  PER_NAME_MONTH varchar (50),
  PER_NAME_QTR varchar (20),
  FSCL_YEAR int,
  FSCL_QTR char (5),
  Stamp DAY_AGO_DT,
  Stamp WEEK_AGO_DT,
  Stamp MONTH_AGO_DT,
  Stamp QUARTER_AGO_DT,
  Stamp YEAR_AGO_DT,
  ROW_WID int
  )
  ;
  
  and then if I get the statement
  
  INSERT INTO S_ETL_DAY VALUES (timestamp('1980-01-01-00.00.00'), 1, 1, "Tuesday", 1, 3, 1, 'January', 1980, '198001', '1980 Q 1', 1980, "Q3", NULL, NULL, NULL, NULL, NULL, 19800101);
  
  its shows error
  
  Error at startup on line 28 of the command:
  INSERT INTO S_ETL_DAY VALUES (timestamp('1980-01-01-00.00.00'), 1, 1, "Tuesday", 1, 3, 1, 'January', 1980, '198001', '1980 Q 1', 1980, "Q3", NULL, NULL, NULL, NULL, NULL, 19800101)
  Error in the command line column: 28:29
  Error report:
  SQL error: ORA-22803: object type contains the attributes of zero
  22803 00000 - "object type contains zero attributes.
  * Cause: An attempt was made to create or specify a column or a constructor
  of a type of object which has no attributes. Only object types
  who have at least one attribute are allowed in this context.
  * Action: specify a valid object type
  
  
  I googled a lot about this error, but in vain.
  can someone help me why this is the case?
  
  Thank you
  Bivin

  TO_TIMESTAMP (February 27, 2002 15:51.12.539880 ',' dd/mm/yyyy hh24:mi.ss.ff')

  INSERT INTO S_ETL_DAY VALUES(to_timestamp('27/02/2002 15:51.12.539880', 'dd/mm/yyyy hh24:mi.ss.ff'), 1, 1, 'Tuesday', 1, 3, 1, 'January', 1980, '198001', '1980Q1', 1980, 'Q3', NULL, NULL, NULL, NULL, NULL, 19800101 );
  

• error report: ORA - 06502:character too small string buffer. urgent!

  Hi guys,.
  My version of the APEX is 3.0.1.00.08, my application run on my test environment, but on the PROD environment, she raised the error:
  error report:
  ORA-06502: PL/SQL: digital or value error: character string buffer too small
  
  On this page, on the left is a tree, the right side is a tabular presentation, when I click on a tree node, it will pass the id of the current node to the form and the form shows data from children. When I click on a tree node, it triggers the ORA-06502 error, but when click on some other nodes, it is correct. I don't know why. And on my test environment, it does not have this error, the test environment has same version with the prod environment, has only less data in the database. Could you help me?
  I searched in the forum, someone said it's LOV problem, if there is problem LOV, all nodes must have the error, why click on some nodes are ok?
  
  Thank you!
  
  Jessica

  I don't know, but why do you need a semicolon at the end of the SQL?

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• error report: ORA-29262: bad URL

  Hi friends,
  
  When I tried to reorder the items in my form through drag and drop operation. I tried to change the display of the form of two rows to three rows.
  
  I am facing this error-> report error: ORA-29262: wrong URL.
  
  My Version of Oracle Apex is - > 3.1.1.00.09
  My version of the database is - > 10.2.0.1.0
  
  Please let me know if anyone of you has solutions.

  Hello

  I had this error, I think it's related to the bug listed on Metalink as 6360779 which is would have been set in Application Express 3.1.1.00.09 see http://www.oracle.com/technology/products/database/application_express/html/3.1.1_patchnote.html?_template=/ocom/print

  However, I use the version above to the apex and received the error, I found that I had put a % at the end of a label sign, that caused the error. Remove the % sign, helped him drag / move to continue.

  Hope this helps

  Paul

• Vista operating system. I get an error report "can't find printable HTML article.

  Firefox returns the error report, "Could not find printable html section" when you click on the printer friendly button. The printer friendly option work in Internet Explorer. Vista operating system.

  The developer of the page made a typo: the button is pressed by a script that seeks the printable element, but on the page, this item is marked printable - and JavaScript required an exact match.

  As a solution, you might set the font using the web console of Firefox. However, it would be wise to complain on the site if they did this on every page.

  To open the web console: Ctrl + Shift + k

  To correct the fault of typing, type or paste the following text at the side of the > and press ENTER:

  document.getElementById("printready").id = 'print ';

  Then click the printable version button to bring up the page in print.

  You can close the web console using the X on the toolbar or by pressing Ctrl + Shift + k new

  I hope this helps.

• Windows Error Reporting service stopped recording of events in the event log, and now when it spawns werfault.exe, the process consumes the CPU until he is killed.

  Windows error reporting service ceased to record events in the event viewer. The last successful entry was 26/03/2010. Since then whenever the service generates Werfault.exe to handle the error, the process seems stuck in a loop of consumer processor, but do nothing. It uses 99% of CPU (80% preferred), is not e/s and number of handles, thread, & working set do not develop.

  Three Windows updates were installed in shortly after the last successful log entry (automatic update is enabled):

  KB915597 def 1.79.702.0 & def 1.79.495.0 both for Windows Defender

  KB980182 for IE 7

  I think that my system is clean, at least Spyware Doctor think it is. I also did some tests Ad-Aware. Windows Defender analyzes every day without error.

  Has anyone else encountered this problem?

  Hi Wannknow,

  It's good information - and thanks for the thanks! You really only need to run an adware or virus (malware) program at the same time. What I would recommend is that you choose an adware program - either "Windows Defender" or "spyware doctor" and disable the other. This can be your root problem, so at this point I turn back on 'report of problems and solutions' and see if you experience the same problem:

  Again, here are the instructions:

  1. open Control Panel. (Press Ctrl-ESC and type 'control' is faster access method).

  2. click on "System and Maintenance" and then click "problem reports and solution."

  3. click on change settings in the left panel of the problem reports and Solutions window.

  4. Select Advanced settings.  In the "for my programs, problem report is: ' select 'off '. Click on CLOSE the

  Hope this helps,

  Steve <> Microsoft partner

• Windows 7 event 1001 error report

  Hello, I had recently a problem with my computer locking up. I had several open tabs Chrome and has been messing around with VirtualBox. My display frozen, white and Brown, and my helmet started playing static. I looked in the error logs, and that's what I found. I could not find someone else with my specific problem, so thanks for any help you can offer.

  Log name: Application
  Source: Windows Error Reporting
  Date: 13/05/2016-16:33:03
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: computer
  Description:
  Bucket of error, type 0
  Name of the event: AppTermFailureEvent
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1:
  P2:
  P3:
  P4:
  P5:
  P6:
  P7:
  P8:
  P9:
  P10:

  Attached files:
  C:\Windows\Temp\WER1B8D.tmpatk.KDMP
  C:\Windows\Temp\WER1B8E.tmp.AppCompat.txt
  C:\Windows\Temp\WER3BBC.tmp.XML

  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Kernel_0_0_134b3ca4

  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: 6dc1ff6a-06b8-11e6-98ae-50465d9e3d61
  State: 0

  Not a single 1001 the 23 events in the file.  You have disabled of course the newspaper

  You have a number of things that should be addressed

  The maximum file size for the session "ReadyBoot" has been reached. Thus, events may be lost (not connected) to the file 'C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl '. The maximum size of files is currently set to 20971520 bytes.

  Cannot find the description of event ID 27 of source e1cexpress. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.

  This error EV is not responsible for freezing.

  I would like to run a file system check to start

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 
  
  
  All instructions are in our Wiki article below... If you have any questions please ask us.
  Check the file system (CFS) analysis and repair system files & DISM to fix things SFC cannot

• Error report: cartridge error cartridge on left must be replaced

  It comes to my printer in Israel - model ID J5783 - all-in-one

  [Personal information]

  CB249a-002 HR-01

  On my printer the restart after an absence extended (5 months), I replaced both cartridges, because

  they had dried.

  At the end of the procedure, the screen displays the following error report:

  "CARTRIDGE ERROR - CARTRIDGE ON LEFT MUST BE REPLACED".

  Since your several recommendations did not work, I went back the color cartridge and I bought

  a new.  Now, I have the same problem again.

  By way of explanation, please note: I spend 2 months each time in spring and autumn in

  in Israel and have a complete set laptop DELL and HP printer all in one at each location.

  Please advise me what I should do about this problem.

  Thank you

  Margot Rosanes-Csuka

  Hi Margot Rosanes-Csuka,.

  Follow the steps outlined in the document below and then let me know if you continue to have problems?

  "Print cartridge is missing, improperly installed, or not intended for your device" Error Message is displayed on the front panel of the all-in-one device

• Change the order of the columns does not cause any data found error report

  Hello. I have a weird problem (and I'm new to APEX). I have a subregion of report that shows the details of a master record based on the ID of the parent area. When I have everything first to change SQL for the query and apply the changes page works fine. When I go back and change the region > attributes report and use the arrows to change the order of the columns the region then returns:
  
  error report:
  ORA-01403: no data found
  
  I tried to change the query so that the columns found in the desired order and who has also not returned no data error. If I go back to my original query (which had 2 fewer columns) the page works again. Then I change to the new query (2 addtl columns), and then it works again, until I have change the order of the columns again. Don't know if it would be serious or not, but one of the columns is a 2 columns of the table concat.
  
  Any ideas would be appreciated, because I'm out of them.
  
  Thank you!
  
  use: Apex 4.0
  DB: 10g Exp

  "807428," Hi

  using 4.0 or 4.0.1? Can you reproduce the same problem on apex.oracle.com as well?

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• How to get the values of the cells of an interactive report?

  Hello
  
  We use the APEX 4.0, with Oracle 10 g r2 on Windows XP.
  
  I have a page with an interactive report, and I configured the "link" column to link to a target custom (instead of see a row).
  This custom target is simply a call to a function of ajax (I hope!) view more information (in another region) on the clicked folder.
  
  I think I have to display the primary key in the report and then get the value of call my function as:

  javascript:my_function(ID);

  to be able to find the information right on the straight line.
  
  But, how to get the value?
  
  Kind regards.
  
  Yann.

  Hello
  Got to the report attributes tab and scroll down to the section of the link column. Click on the lightning bolt next to the column value, a popup displays Columsn names in reports of each locked in a pair of #.

  You pass the column for your javascript like this function

  
  javascript:my_function('#ID#');
  

  Kind regards

• How to put in Spanish, ESN CP1252, oracle character set WE8MSWIN1252

  Select * from NLS_DATABASE_PARAMETERS
  
  database character set is

  NLS_CHARACTERSET               AL32UTF8
  NLS_NCHAR_CHARACTERSET         AL16UTF16  
  NLS_LANGUAGE                   AMERICAN
  NLS_TERRITORY                  AMERICA

  Select * from NLS_INSTANCE_PARAMETERS;

  PARAMETER                         VALUE
  --------------------------------- ---------------------------------
  NLS_LANGUAGE                      SPANISH
  NLS_TERRITORY                     SPAIN

  How to put in Spanish, ESN CP1252, oracle character set WE8MSWIN1252
  
  Please suggest.
  
  Thank you in advance

  Is it really OK to convert AL32UTF8 WE8MSWIN1252?
  AL32UTF8 NLS_CHARACTERSET

  TO

  WE8MSWIN1252 NLS_CHARACTERSET

  Please suggest