Windows 7 event 1001 error report
Hello, I had recently a problem with my computer locking up. I had several open tabs Chrome and has been messing around with VirtualBox. My display frozen, white and Brown, and my helmet started playing static. I looked in the error logs, and that's what I found. I could not find someone else with my specific problem, so thanks for any help you can offer.
Log name: Application
Source: Windows Error Reporting
Date: 13/05/2016-16:33:03
Event ID: 1001
Task category: no
Level: Information
Keywords: Classic
User: n/a
Computer: computer
Description:
Bucket of error, type 0
Name of the event: AppTermFailureEvent
Answer: No available
Cabin ID: 0
Signature of the problem:
P1:
P2:
P3:
P4:
P5:
P6:
P7:
P8:
P9:
P10:
Attached files:
C:\Windows\Temp\WER1B8D.tmpatk.KDMP
C:\Windows\Temp\WER1B8E.tmp.AppCompat.txt
C:\Windows\Temp\WER3BBC.tmp.XML
These files are available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Kernel_0_0_134b3ca4
Symbol of the analysis:
Recheck for solution: 0
Report ID: 6dc1ff6a-06b8-11e6-98ae-50465d9e3d61
State: 0
Not a single 1001 the 23 events in the file. You have disabled of course the newspaper
You have a number of things that should be addressed
The maximum file size for the session "ReadyBoot" has been reached. Thus, events may be lost (not connected) to the file 'C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl '. The maximum size of files is currently set to 20971520 bytes.
Cannot find the description of event ID 27 of source e1cexpress. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.
This error EV is not responsible for freezing.
I would like to run a file system check to start
Tags: Windows
Similar Questions
-
I noticed a few errors reported recently in my event viewer. The system also works normally without any problem in my usual daily tasks. The two error reports are the following:
Log name: System
Source: Service Control Manager
Date: 05/07/2015-17:46:33
Event ID: 7031
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: Chris-PC
Description:
The diagnosis ended unexpectedly Tracking Service. It has done this 1 time. The following corrective action will be performed in 30000 milliseconds: restart the service.
The event XML:
7031
0
2
0
0
0 x 8080000000000000
1924056
System
Chris-PC
Diagnostic monitoring service
1
30000
1
Restart the service
------------------------------------------------------------------------
Log name: Application
Source: Application error
Date: 05/07/2015-17:46:32
Event ID: 1000
Task category: (100)
Level: error
Keywords: Classic
User: n/a
Computer: Chris-PC
Description:
The failing application name: svchost.exe_DiagTrack, version: 6.1.7600.16385, time stamp: 0x4a5bc100
The failed module name: ntdll.dll, version: 6.1.7601.18839, time stamp: 0x553e8801
Exception code: 0xc000000d
Offset: 0 x 00098001
ID of the process failing: 0x7e8
Start time of application vulnerabilities: 0x01d088cd0e13aeb1
The failing application path: C:\Windows\System32\svchost.exe
The failed module path: C:\Windows\SYSTEM32\ntdll.dll
Report ID: 9d1a2240-f4d8-11e4-a676-002481efc46a
The event XML:
1000
2
100
0 x 80000000000000
42593
Application
Chris-PC
Svchost.exe_DiagTrack
6.1.7600.16385
4a5bc100
ntdll.dll
6.1.7601.18839
553e8801
c000000d
00098001
7E8
01d088cd0e13aeb1
C:\Windows\System32\svchost.exe
C:\Windows\SYSTEM32\ntdll.dll
9d1a2240-f4d8-11e4-A676-002481efc46a
,I also get a DCOM error on each start, but have been informed that I can ignore it safely. The two errors reported above, however, are new, but, so far, seem not to cause performance problems.
All advice would be much appreciated.
Chris
I use Microsoft Security Essentials with free Malwarebytes as a scanner support. To remove unwanted pests, I use ADWCleaner on a when necessary basis. I remember only a serious malware incident in recent years, which I solved it quickly. SUPERAntiSpyware is not incompatible, but my experience is that there's little consequence. It is not on this computer, but I still have it on my laptop. Duplicates emisoft Malwarebytes so why bother with it?
My last reading of your event viewer reports, is that there is nothing serious at present on your computer.
-
Windows FAX and SCAN error reports - request server name. How to find the server name?
How can I find the name of the server to send e-mail using Windows FAX and SCAN.
Hi DonaldCombes,
1. are you able to use it earlier?
2. What is the exact error message you get?
3. don't you make changes occur the computer before the show?Try to use the full name of your Pc name of the server.
Configure your computer to send and receive faxes
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-your-computer-to-send-and-receive-faxesSolve fax problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-fax-problems -
Windows Error Reporting error re #1001 Event Viewer: MpTelemetry, MSE
I am running Windows 7 Home premium 64-bit. Get the Windows Error Reporting (information level) #1001-
Log name: Application
Source: Windows Error Reporting
Date: 18/01/2011 10:52:08AM
Event ID: 1001
Task category: no
Level: Information
Keywords: Classic
User: n/a
Computer: Joanne-PC
Description:
Bucket of error, type 0
Name of the event: MpTelemetry
Answer: No available
Cabin ID: 0Signature of the problem:
P1: 2152759308
P2: unspecified
P3: ScanFile
P4: 2.1.6805.0
P5: Microsoft Antimalware(BCF43643-A118-4432 - CHANTER-
D861FCBCFCDE)
P6: unspecified
P7: unspecified
P8:
P9:
P10:Attached files:
These files are available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue
\NonCritical_2152759308_1ec832eb2ce
eb154aa61793319bc5d9cdf3883dd_035c2
09a
Symbol of the analysis:
Recheck for solution: 0
Report ID: 48ee36c7-2323-11e0-90e7-002622f27952
Display state: 4
The event XML:
<>xmlns = "http://schemas.microsoft.com."
' / Win/2004/08/Events/Event ">
Reporting">
<>Qualifiers = '0' > 1001
4
0 0 x 80000000000000 s >
01-18T16:52:08.000000000Z"> 23730 >
Application
Joanne-PC
0
MpTelemetry
Not available
0
2152759308
unspecified
ScanFile
2.1.6805.0
Microsoft antimalware(BCF43643-A118-4432 - CHANTER-
D861FCBCFCDE)
unspecified
unspecified
C:\ProgramData\Microsoft\Windows\WER\ReportQueue
\NonCritical_2152759308_1ec832eb2ce
eb154aa61793319bc5d9cdf3883dd_035c2
09a
0
48ee36c7-2323-11e0-90e7 -.002622f27952
4
I get these since I installed MSE this time on Windows 7 and also on my most old laptop with Vista. I see that it is not critical, but I don't know what the problem is. I have not found a problem when the MSE is scanning or protect my computer.
Is this serious and I want to do something more? If someone can tell me how to investigate this type of info in case the Viewer, I would be happy.
Thanks for any help.
Joanne
Hi Joanne,You have any anti-virus or anti-malware to third party software installed with MSE (Microsoft Security Essentials)?I wouldn't think it's serious, but a mistake is a problem regardless of its gravity.However, I would like to you follow these steps and check to see if they help.Step 1:I would like you to put your computer in a clean boot State in order to eliminate any conflict of third party software causing the problem to occur. I suspect the involvement of a third-party software.Note: Please follow step 7 to your computer as usual after the test.Step 2:Note: Be sure to only install the version appropriate for your operating systemSee also:What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-ViewerAziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Windows error reporting service ceased to record events in the event viewer. The last successful entry was 26/03/2010. Since then whenever the service generates Werfault.exe to handle the error, the process seems stuck in a loop of consumer processor, but do nothing. It uses 99% of CPU (80% preferred), is not e/s and number of handles, thread, & working set do not develop.
Three Windows updates were installed in shortly after the last successful log entry (automatic update is enabled):
KB915597 def 1.79.702.0 & def 1.79.495.0 both for Windows Defender
KB980182 for IE 7
I think that my system is clean, at least Spyware Doctor think it is. I also did some tests Ad-Aware. Windows Defender analyzes every day without error.
Has anyone else encountered this problem?
Hi Wannknow,
It's good information - and thanks for the thanks! You really only need to run an adware or virus (malware) program at the same time. What I would recommend is that you choose an adware program - either "Windows Defender" or "spyware doctor" and disable the other. This can be your root problem, so at this point I turn back on 'report of problems and solutions' and see if you experience the same problem:
Again, here are the instructions:
1. open Control Panel. (Press Ctrl-ESC and type 'control' is faster access method).
2. click on "System and Maintenance" and then click "problem reports and solution."
3. click on change settings in the left panel of the problem reports and Solutions window.
4. Select Advanced settings. In the "for my programs, problem report is: ' select 'off '. Click on CLOSE the
Hope this helps,
Steve <> Microsoft partner
-
Event 1001 bugcheck BSOD Windows 7 Ultimate 64 bit
I've updated all the drivers, I always get this random BSOD can someone give me pointers or a solution to this problem starts to be a real frustrating of processes on the computer is only a few months, his current running Windows 7 Ultimate 64 bit, before it was 8.1 Home 64 bit had the same issues, so I went back to 7. I check the event viewer and see it displayed.
Log name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 02/12/2015-12:45:03 AM
Event ID: 1001
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: DumaMink
Description:
The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000024 (0xfffff88007a303f8, 0xfffff88007a2fc50, 0x00000000001904fb, 0xfffff880012f1bf7). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 120215-44631-01.
The event XML:
1001
0
2
0
0
0 x 80000000000000
8038
System
DumaMink
0 x 00000024 (0xfffff88007a303f8, 0xfffff88007a2fc50, 0x00000000001904fb, 0xfffff880012f1bf7)
C:\Windows\MEMORY. DMP
120215 44631-01
Then I see this posted a few laps down
Log name: System
Source: Microsoft-Windows-Kernel-Power
Date: 02/12/2015-12:44:38 AM
Event ID: 41
Task category: (63)
Level: critical
Key words: (2).
User: SYSTEM
Computer: DumaMink
Description:
The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.
The event XML:
41
2
1
63
0
0 x 8000000000000002
7992
System
DumaMink
36
0x1904fb
0xfffff88007a303f8
0xfffff88007a2fc50
0xfffff880012f1bf7
fake
0
Hello
Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.
You can consult the troubleshooting steps mentioned in the following Microsoft support article.
Resolve stop (blue screen) error in Windows 7
Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk be lost.
System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
Let us know the results. Hope this information was useful.
-
Two files (*.txt and *.dmp) error report are created when an application "has a problem" and are located in the Local Settings/Temp folder. These can be sent to Microsoft. If they are, they are immediately removed from the Temp folder.
I would like to send them to the developer of an application to help resolve a failure to properly load the application. How can I do this?Hello
I suggest you to return the item and check if it helps:
How to configure and use error reporting in Windows XP
http://support.Microsoft.com/kb/310414
Procedure to view and manage event logs in Event Viewer in Windows XP
-
Vista - system queued windows error reporting problem
My Vista disk cleanup utility reports that I can save 258GB by removing "system queued windows error reporting." Well well... my HD is only 145GB so somethiing is bad.
I read a url that has a fix: http://www.oamate.com/is-it-safe-to-delete-system-queued-windows-error-reporting.html
Is this a correct solution? Looks like it's a bug of Microsoft for you, but I can't find anything about this on the Microsoft.com site. In this forum, there is a thread that says it's OK to dele it, but I don't want to lose all my data!
Thank you
Its ok to delete the data in queue for the error report windows.
In the event of a hardware or software problem on your computer, Windows collects information that describes the problem, called a problem report. Report details can include, for example, the name of a program that has stopped working, the date and time that a problem occurred, or the version of the program, which has encountered the problem.
Sending a problem report allows Windows to notify you if a solution is available. If a solution is not available, you can ask to provide additional details about the problem in order to create a. Additional details can include files or parts of files that help to identify the problem and explain how it has affected your computer. Windows does not intentionally collect personal information, and you can view additional details in a problem report before sending it to Microsoft.
If you want to disable this feature, follow the steps mentioned in the link below
http://www.howtogeek.com/HOWTO/7863/disable-error-reporting-in-XP-Vista-and-Windows-7/
hope this helps
-
the parameters of Windows error report
I deleted the windows error report schedule settings in the scheduling of the task. does anyone have the settings? screenshots would be useful. I have no idea how to create from scratch. Help...
using Vista Home premium
If you delete a report of events in Event Viewer you cannot restore unless you saved it first. You have to re-create the task.
-
then jeutiliser disk can clean up to remove per user archived windows error reporting
can I use Disk Cleanup to remove user archived Windows, error report I 102 mb here can I remove it sefely
Thank you
Hello
In the event of a hardware or software problem on your computer, Windows collects information that describes the problem, called a problem report. Report details can include, for example, the name of a program that has stopped working, the date and time that a problem occurred, or the version of the program, which has encountered the problem. I suggest you to check the below link.
http://TechNet.Microsoft.com/en-us/library/cc709644 (WS.10) .aspx
Yes, you can clean your system and remove the unwanted files using Disk Cleanup utility. Click on the link below.
Delete files using disk cleanup
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
-
I kept getting annoying "authentication failure. Please check your user name and password of the account '... xyz. "" error every 30 seconds. "
I tried to restore my system and antivirus running - even to reinstall my anti-virus. I deleted the accounts in question and kept still getting the error message. Note, receive emails has never been a problem.
I finally disabled the element of the system of "Windows Error Reporting Service" MS configuration and now the error pop ups have disappeared. Is it correct to keep this function disabled?
Thank you.
To check the event logs, go to start / Control Panel / administrative tools / event handler.
To achieve the reliability and performance monitor, go to start / search and type in reliability, and then double-click the program icon that appears.
I hope this helps. You can always check these sites periodically and do not need WER to warn you of a problem (even if it is perhaps faster) - you can check manually. WER serves a purpose and he gives notification of a problem (which is good), but not in the circumstances that you knew. This is a "nice to have" feature - not absolutely necessary. We can try testing again to see if we can find the problem with WER if you're at it - or you can simply leave it off and make periodic checks of manual (decision is yours).
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
The blue screen of death occurred during online communication using a Logitech VID communications program. The following error report translated by:
-Fault bucket 0x7E_lvrs. ReadWriteThread + 243, type 0
Event name: BlueScreen
Answer: no
Cabin ID: 0Signature of the problem:
P1:
P2:
P3:
P4:
P5:
P6:
P7:
P8:
P9:
P10:Attached files:
C:\Windows\Minidump\Mini013110-01.dmp
C:\Users\Douglas\AppData\Local\Temp\WER-78015-0.SysData.XML
C:\Users\Douglas\AppData\Local\Temp\WER7CDD.tmp.version.txtThese files are available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report0eeec72b
Online from the best part of twenty minutes before it occurred. The two users of the
program had the same result. (Blue screen of death) The two of us are running Windows Vista Ultimate Edition on motherboards model Intel D850EMVR with the latest bios update, Intel Pentium IV 3.06 Ghz, 533FSB CPUs, 2 GB of 168 pin memory of Samsung PC800 ECC, ATI AIW 9600XT 256 MB AGP video cards, Sound Blaster Audigy 2ZS with discs Live sound cards, ASB3940 Advansys SCSI adapters , Nakamichi5 disk SCSI MJ - 5.16 drives, Iomega SCSI ZIP 100 drives, and Lite on model SHM-165H6S DVD/CD rewritable EIDE drives. The two systems using model Logitech 9000 Pro webcam. (The two systems are essentially clones) Communication between Memphis, TN and Windsor, ON, CAN.Hello
This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
methods in the next message and then return to the if necessary troubleshooting tool.Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.When you get to the pilot and sections of the memory of the troubleshooter check the following message to
update drivers and memory test and then return to the troubleshooter if necessary.BCCode: 7F 0x0000007E
Cause
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.
Common exception codes are:
- 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).
Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques.
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.
If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .
In case of exception code 0 x 80000002, the trap frame provides additional information.
If you do not know the specific cause of the exception, consider the following questions:
- Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
- Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.
If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.
Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.
You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.
The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.
-------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlHere are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during "blue screen of death," collisions
http://www.NirSoft.NET/utils/blue_screen_view.html
Displays information on all the "crash" of a table - freeBlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.
You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
How to fix the error in the windows system event log
How to diagnose in the event log error... pls help.
Here are some notes on the event viewer reports that can help you. When you have a lot of mistakes, you need to focus on system errors and warnings, even if it's the applications that are giving you grief. Problems with the first sorting system can do the easier application problems. Note the time that the computer is started last and deal first with those at the beginning of the boot. Correct previous errors can be solved later.
1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.
2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.
3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.
4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Click the button copy on the general tab allows you to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.
5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.
6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.
7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.
-
Hello
When I present reports of error and asks me to send additional information, I get the above error. I have read and tried all the solutions already asked for this problem except for the removal of error reports (because if I do that, how could they be downloaded for analysis?)
Just to confirm, I have:
Restarted with a clean Windows with only Microsoft services running and no boot entry and retried the upload.
A ran the SFC system without any problems.
Insured to the logs and alerts are allowed through the firewall and temporarily disabled my virus scanner traffic analysisThe persistent questions seem to be Google Reader goes down, and several accidents related to my AMD video driver.
Hope you can help.
Hi Kyle,.
Did you do any change in software of hardware on the computer before this problem?
You can read the following steps and check if it works.
Method 1:
Check if error reporting is enabled.
For do I suggest you check if error reporting service Windows has stopped working. Try to start the service by following the steps below:
a. click Start> type of search in the servicesbox, press enter > find windows error reporting service in the list of the list of services > right click , and then click Start.
(b) also to run the service as Auto, please follow the steps below.
c. right-click on the service from the list of windows error reporting services and then click Properties > there will be a pop-up screen > check for startup type and select Automatic under drop down menu and apply the settings.
Note:
The purge will remove the existing report but if the problem reappears to collect the reports again and you will be able to move forward with the process of reporting errors.
Purge all existing reports by using the disk cleanup utility, and then see if you can send information to the server of problem reports.
Refer to this help article.
Delete files using disk cleanup
http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup
Method 2:
Please refer to Google Drive Known Issues, you can also ask your question in the support of Google using Google Drive question forums.
For the problem with the AMD video driver, you can try to update the drivers for the latest on the manufacturer 's Web site and check if that helps.
To know better the question you can always check the event viewer details related to the issue.
With the event in the Event Viewer logs, you can get information about your hardware, software and components of the system and monitor the events of security on a local or remote computer. Event logs can help you identify and diagnose the source of current system problems or help you predict potential system problems.
Open event viewer
http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
Please return to the State of the issue and also let us know in case you need assistance on issues related to Windows.
-
Hey I have windows 10 and cc 2015 photoshop keeps crashing here is the error report:
Log name: Application
Source: Application error
Date: 09/02/2015 11:26:53
Event ID: 1000
Task category: (100)
Level: error
Keywords: Classic
User: n/a
Computer: myPC
Description:
The failing application name: Photoshop.exe, version: 16.0.1.168, time stamp: 0x55af6140
The failed module name: atio6axx.dll, version: 6.14.10.13399, time stamp: 0x55bfc60d
Exception code: 0xc0000005
Offset: 0x00000000001752f6
ID of the process failed: 0x114c
Start time of application vulnerabilities: 0x01d0e50cfe28b35e
The failing application path: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Photoshop.exe
Path of the failing module: C:\WINDOWS\SYSTEM32\atio6axx.dll
Report ID: 489f5592-2ce8-4e83-9a71-95309651eba0
Faulting full name of the package:
ID of the failed package-parent application:
The event XML:
" < event xmlns =" http://schemas.Microsoft.com/win/2004/08/events/event "> "
<>System
< name of the provider = 'Error of Application' / >
< qualifiers EventID = '0' > 1000 < / EventID >
< niv.2 > < / level >
< task > 100 < / task >
< Keywords > 0 x 80000000000000 < / keywords >
< TimeCreated SystemTime = "" 2015-09 - 01 T 23: 26:53.000000000Z "/ >"
< EventRecordID > 2029 < / EventRecordID >
Application of < channel > < / Channel >
myPC < computer > < / computer >
< security / >
< / system >
< EventData >
Photoshop.exe < data > < / data >
< data > 16.0.1.168 < / data >
< data > 55af6140 < / data >
< data > atio6axx.dll < / data >
< data > 6.14.10.13399 < / data >
< data > 55bfc60d < / data >
c0000005 < data > < / data >
< data > 00000000001752f6 < / data >
< data > 114 c < / data >
< data > 01d0e50cfe28b35e < / data >
C:\Program Files\Adobe\Adobe Photoshop 2015\Photoshop.exe < data > CC < / data >
< Data > C:\WINDOWS\SYSTEM32\atio6axx.dll < / data >
< data > 489f5592-2ce8-4e83-9a71-95309651eba0 < / data >
< data >
< / data >
< data >
< / data >
< / EventData >
< / event >
Hi Cozbro,
Hope you are doing very well.
Please, try the steps mentioned below.
First go to the web link AMD Catalyst 15.8 Beta Driver for Windows and install updates to the graphics drivers available in case it does not ne pas travailler work for you, so please treat the steps mentioned below.
- Open Device Manager
- Expand display drivers
- Right-click on the graphics card AMD
- Click on update driver software
- Select Browse my computer for driver software
- Click on let me pick from a list of device drivers
- And now select Standard VGA
Snap shots attached-
Note- Right-click on AMD, Intel, you will see
Note- Click on let me pick from a list of device drivers
Step 1: Launch now PS and see if it opens.
Step 2: If it opens very well then are the steps mentioned below to disable PS to use the graphics processor.
Step 3: Click on edit - Preferences - performance use turn off graphics card option.
Step 4: Press the return/enter key and close the Psalm
Step 5: After completing the above steps, make sure you return on the ordinary properties of graphics card.
Step 6: PS open again and check if it opens correctly.
Note: Make sure that you go back to Device Manager and go back to the original properties of your graphics card driver.
Please let us know if this helps
Concerning
Rohit
Maybe you are looking for
-
I saved several groups almost 50 pellets.Yesterday, I was looking for some videos on Youtube. When some videos seen regularly, I select a video that seems to expect too much to appear.I close firefox.After the reopening, he opened with a default page
-
The window to add information about synchronizing with my existing computer has 2 buttons - add a new account - and - I have an account-. The Create button again will respond, but since I already have an account that did not help. The button "I have
-
Integrated video makes to small size
I use embedded video of VK http://VK.com/Matthew.Klimek on my Google Blogger pages: http://Matthew-Klimek.blogspot.com/ http://newtonfamilyreunion.blogspot.com/ The size of the video was reduced considerably, this problem only occurs through the Fire
-
Satellite M40X-115 - cursor will not stop!
I have a toshiba Satellite M40X-115 laptop with XP. My cursor starts moving and will not stop. For example when I try to log on to the laptop and click in the password field. the cursor starts moving, fills the space, I try to delete it, but the curs
-
create a remote hard disk recovery
HP support assistant proposed to create the recovery of our new laptop (HP Envy 17-j008eo) - by default, the program 'create recovey together' can create recovery set to DVD (single & double layer) and external USB Flash drive. As I have a good NAS R