Value of the EL Expression always return false

Similar Questions

• CoverageInfo.isCoverageSufficient (CoverageInfo.COVERAGE_MDS) always returns false on Simulator

  Hello world

  In my application, I would like to send data on a certain interval using the BES (MDS).  When the Blackberry is on the cover, I send the data right away... but when the Blackberry is out of coverage, I'm storing data on the PersistentStore and send it to the next interval.

  This is the condition that I use to determine whether or not the Blackberry is on the cover:

  {If ((RadioInfo.getState ()! = RadioInfo.STATE_OFF & (RadioInfo.getNetworkService () & RadioInfo.NETWORK_SERVICE_DATA)! = 0) & {CoverageInfo.isCoverageSufficient (CoverageInfo.COVERAGE_MDS))}

  It works perfectly on a real device Blackberry... but it always returns false on the Simulator (I tried Curve 8310 Rogers and 8330 Curve with my code point 4.2.1).)  It seems to be this specific line which is not correct:

  CoverageInfo.isCoverageSufficient (CoverageInfo.COVERAGE_MDS)

  It is not a very big problem because it works on a real device... it's just development and debugging more complicated as I have to remember to put this line in the comments when you use the Simulator and remove the comments before installing the application on a real device.

  I have to do something special on the Simulator to enable this?  Or is it a problem with my code?

  Thanks for your help!

  I saw that too. Put the CoverageInfo into your own method and use DeviceInfo.isSimulator () to work around the call and returns "true" If you run on the simultor.

• Compare always returns false

  can you see why this always returns false ObservedType?

  < cfset isNullfwdExtraWindow = false >

  < cfif arguments.trade. ObservedType eq 'C' >

  isNullfwdExtraWindow = true >

  < / cfif >

  < cfif arguments.trade.ignoreBarrierStyleAndObserved >

  isNullfwdExtraWindow = true >

  < / cfif >

  nikos101 wrote:

  can you see why this always returns false ObservedType?

  ObservedType eq 'C' >

  isNullfwdExtraWindow = true >

  isNullfwdExtraWindow = true >

  This code is missing the cfset tag. You can try something like

• is it possible to pass the value of the variable validation function return Boolean message?

  

  Assume that L_BATCH_NAME is the name of the variable which will receive the value as

  declare

  l_batch_name: = "NA";

  BEGIN

  L_BATCH_NAME: = FUNCTION (PARAMETERS);

  IF CONDITION > 0

  THEN

  RETURN FALSE;

  ON THE OTHER

  RETURN TRUE;

  END IF;

  END;

  Hi Reema,

  ReemaPuri wrote:

  

  Assume that L_BATCH_NAME is the name of the variable which will receive the value as

  declare

  l_batch_name: = "NA";

  BEGIN

  L_BATCH_NAME: = FUNCTION (PARAMETERS);

  IF CONDITION > 0

  THEN

  RETURN FALSE;

  ON THE OTHER

  RETURN TRUE;

  END IF;

  END;

  1. create a hidden item I say P1_HIDDEN_ITEM

  2 type the error message for this element in your process of

  declare
  l_batch_name:='NA';
  
  BEGIN
  :P1_HIDDEN_ITEM := FUNCTION(PARAMETERS);
  IF CONDITION > 0
  THEN
  RETURN FALSE;
  ELSE
  RETURN TRUE;
  END IF;
  END;
  

  3 and refer to this element hidden in the error message.

  Record for the batch '||&P1_HIDDEN_ITEM.||' already exists.
  

  Kind regards

  Jitendra

• Reset timer does not work properly.  Find the timer just always return null...?

  I'm trying to get the meter backwards and the Clear_Form when the timer expires. I'm trying to reset the timer when you move the mouse or type text in all fields (for those who use the tab keys to navigate through the page).
  
  I tried procedures for 'Create' and 'Remove' the timer, and it did not work.
  
  I tried the Set_timer integrated to 'reset' the timer instead of create and delete timers, and it didn't work either.
  
  
  
  I'm building a requests for a customer to enter their personal information at a kiosk in the lobby of the waiting room, before an appointment with a representative, which will save all your meeting time. The timer will be to erase the personal information when a client leaves just during the process.
  
  The timer keeps always just pulled over and over again, and I can't it stop/reset/create new timer when the mouse is moving etc... so he keeps almost touching news over and over again, which is not the desired effect.
  
  
  Could someone help me please? It seems like it should be a pretty basic function to the program, but I'm not find all messages about my question. I use Oracle 9i and 10g of form.

  Hello

  You do not have any code, so that it is difficult to guess what can be the problem. Remember that the timer name must be given capital letters in functions.

  François

• iPhone Firefox - javascript confirm dialogue always returns false on ok or cancel

  Script simple test here to alert the return of ok/cancel, which is always false for me

  http://www.wotnot.co.UK/_Test.php

  Please fix it in version 5.0, scheduled to be released Wednesday of this week.

  (Bug 1273963)

• List of value in the field of handling returned by getValueList() - ConstraintEnumeration

  I would like to create a script to extract, for each column using a domain, a list like this format:

  tableName. columnName | domainValue | domainValueDescription

  But the problem is that domain.getValueList (), agreeing with the documentation, returns a type of ConstraintEnumeration and may be a silly question, but I do not know how to navigate through this object to get the values and descriptions.

  It's the example script:

  var tables = model.getTableSet () .toArray ();

  for (var t = 0; t < tables.length; t ++) {}

  var table = tables [t];

  var columns = table.getElements ();

  for (var c = 0; c < columns.length; c ++) {}

  var column = columns [c];

  If (Column.getUse () == 0 & & column.getDomain ()! = null) {}

  field var = column.getDomain ();

  var valueList = domain.getValueList ();

  / / how iterate valueList?

  }

  }

  }

  I looked at the documentation but this class is undocumented, so I do not know the methods available and had no luck in trying to discover with the debugger.

  I appreciate all help.

  Thank you.

  Hello

  Yes, the documentation for ConstraintEnumeration does not seem to miss.

  For your case, there is a getValuesDescriptionMap() method that returns a map that contains an entry for each value and maps the values of their descriptions.

  David

• After weeks of the trial, Nag, always returns. Is there a solution?

  It is installed on a NEW system (Dell XPS 8500 with Win7 Pro) that was purchased with the explicit purpose of installation suite CS6 Master.

  So far:

  Called on the phone chated with technical support.

  After a long misunderstanding my question in July 30...

  ----------

  JAMES: C:\Program Files (x 86) \Common Files\Adobe\Adobe PCD
  JAMES: il
  Kumar: Yes .
  Kumar: OK .
  Kumar: file in Adobe PCD, you will get a folder by name Cache.
  Kumar: Please change the name to cache.old.
  Kumar: I would like to know if you have finished.
  JAMES: FACT
  Kumar: now, please launch the product.
  JAMES: NOPE still on trial
  JAMES: he launched... just sitting there
  Kumar: Please continue installation.
  Kumar: and then click on "The software license".
  Kumar: serial number Enter it.
  JAMES: not an option in the window of the trial, it is either
  JAMES: Licebnse the trail of Contiue or software
  Kumar: I know the option you found there?
  Kumar: Please click on 'the software license.
  JAMES: fact
  Kumar: serial number Enter it.
  -------
  Kumar apearently always supposed that I was getting an error or was trying to install... but I entered my serial No. as said and problem disappeared for a little time and a few days after that, I get a message from the interesting trial after a system restart when I opened the first:

  

  At this point, I completely uninstalled all adobe products. Repeat previous and deleted any Referances to the Adobe products that I could find in the registry.
  

  I then installed my old suite CS4 I improved some and then installed the upgrade of the suite master CS6 of disks I bought directly from Adobe.

  Everything worked fine for about a week and then...
  

  
  

  I was greeted with nag screen again today (after a reboot when I opened photoshop) informing me that the trial has expired (1 days left)
  

  Is there any solution for this?

  Ok

  I received permission to share what I found out about a solution with CS6 screen of the trial which is also known under the name a license not taking or do not remember the license information.

  Regardless of the result, please give me your comments I results are inconclusive at this stage to be an Adobe technical support policy and documentation.

  What happened:

  It is my position that the root cause of the problem for me and most of the others is caused due to the corruption of files in the installation process when these conditions are met:

  1. The PC has enabled hibernation
  2. A hard drive and HD controller condition exists which is not 100% compatible with the hibernation process.
  3. You install a new product from adobe, and before the end, sometimes in the installation process... some or all the hibernation process occurs.
  4. If #3 happens at the wrong time one or more zones that are part of the process of validation of license are not correctly written on the hard drive, thus creating a problem of validation of license on starting the program (when the cache files are supposed to be deleted). This can occur after the first reboot of the system after first confirming your license or a few complete reboots or hibernation.

  The Western Digital drives hard specific simultaneously caused corruption of files on Vista Windows system as an example of this. When a file is damaged, according to the way in which it can present one or more times in the same place. It may or may not be disposable makes bad both in a sense uber read-only. I have a Seagate st31000524AS connected to a Chipset Intel 7 series/C216 family SATA AHCI Controller. Let me know what yours is, and maybe we can get the list.

  Easier solution:

  (Being in IT for 20 years... the solution by default, most technicians use for something else insoluble by a reload of software retail: erase disk and all reload correctly)

  What finally ended my dilemma was to reinstall the whole system from scratch a disc of Win7pro factory after having used a HD utility to return the drive to 000000 s. Then I disabled sleep extended, then installed CS6 Master Suite, anti-virus, then all the rest.

  Since then I HAVE NEVER had PROBLEM!

• selection of the cmdlet return false?

  Hello
  
  In the specifications, sometimes the select() applet method return false. I suspect what circumstances cause the false return of the applet?
  
  In my mind, before the selection, the applet is resting while he should be ready to be selected. Therefore invoke the select() method should always return true in all cases.
  
  Kind regards
  
  Mike

  For some reason application, an applet may refuse to be selected:
  -It could be a 'server' applet, whose only purpose is to provide a shareable object of other applets
  -l'applet can have "invalidated" by the issuing company (expiry, loss/theft, etc...)

  It is the application provider to define the cases where a cmdlet refuses selection.

• Why GetMonitorBrightness function returns false in the following code?

  I create an application in Qt (its an IDE-platform) in which I want to add the functionality of change of brightness of the screen, but when I call the function GetMonitorBrightness, it returns false, and I don't know why. Maybe my code is not good I don't know please help me solve this problem.

  And I only monitor then there is no need to call the GetNumberOFPhyscialMonitors function right?

  My Code:

  void EyeCare::on_startcaringButton_clicked()
  

  {
  

      HMONITOR monitorHandler = NULL ;
  

      LPDWORD minBrightnessLevel = NULL , maxBrightnessLevel = NULL,
  

      currentBrightnessLevel = NULL ;
  

      HWND windowHandler ;
  

      windowHandler = FindWindow(NULL,NULL) ;
  

      monitorHandler = MonitorFromWindow(windowHandler, MONITOR_DEFAULTTOPRIMARY) ;
  

      if (GetMonitorBrightness(monitorHandler,minBrightnessLevel,
  

                           currentBrightnessLevel, maxBrightnessLevel) ){
  

          DWORD newBrightnessLevel = (*maxBrightnessLevel) - 50 ;  // my current brightness is 100%
  

          SetMonitorBrightness(monitorHandler,newBrightnessLevel) ;
  

          SaveCurrentMonitorSettings(monitorHandler) ;
  

          style.append("color: green ;") ;
  

      }else
  

          style.append("color: red ;") ;
  

      ui->startcaringButton->setStyleSheet (style) ;
  

      QErrorMessage *errorMessage = new QErrorMessage ;
  

      errorMessage->showMessage(GetLastErrorStdStr());
  

  }
  

  QString GetLastErrorStdStr()
  

  {
  

    DWORD error = GetLastError();
  

    if (error)
  

    {
  

      LPTSTR errorMessage;
  

      FormatMessage(
  

                  FORMAT_MESSAGE_FROM_SYSTEM |
  

                  FORMAT_MESSAGE_IGNORE_INSERTS |
  

                  FORMAT_MESSAGE_ARGUMENT_ARRAY |
  

                  FORMAT_MESSAGE_ALLOCATE_BUFFER,NULL,
  

                  error,0,(LPWSTR) &errorMessage,0, NULL );
  

      return QString :: fromWCharArray(errorMessage) ;
  

    }
  

  }
  

  My header files:

  #include

  #include

  My library files:

   

  dxva2.dll (copied ' c:/windows/system32' folder Dll in my project folder)

  dxva2.lib (copied "c:/windows/system32" in the library of my project folder folder)

  This is how include you the Qt library:

  win32:CONFIG(release,debug|release): LIBS += -L&&PWD/Dll/ -ldxva2
  

  win32:CONFIG(release, debug|release): LIBS += -L$$PWD/Library/ -ldxva2
  

  else:win32:CONFIG(debug, debug|release): LIBS += -L$$PWD/Library/ -ldxva2
  

  else:unix: LIBS += -L$$PWD/Library/ -ldxva2
  

  INCLUDEPATH += $$PWD/Library
  

  DEPENDPATH += $$PWD/Library
  

  Hello

  This issue is beyond the scope of this site and should be asked on the forums Technet or MSDN.

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

  Concerning

• Count (1) returns the null value in the Group of

  Hi the gems... Good afternoon...
  
  I read that the COUNT() function always returns 0 (zero) if there is no corresponding row in the table.
  
  The following code returns 0 as expected:
  

  SELECT COUNT(1) FROM book_table
               WHERE client_id = 10009
                 AND book_id = 5465465
                 AND book_sub_id = 'gfdf'
                 AND amount = 78686

  But when I used the GROUP BY clause in the query, then he returned to nothing:
  

  SELECT COUNT(1) FROM book_table
               WHERE client_id = 10009
                 AND book_id = 5465465
                 AND book_sub_id = 'gfdf'
                 AND amount = 78686
  group by client_id,book_id,book_sub_id,amount

  Why this is happening... Please suggest...

  When you use just rely on its own (and you must use count (*) not count (1) as the optimizer based on CSSTidy will re - write internally to count (*) anyway)... then you say you want a count of all rows.

  When you introduce the group by clause you say thay want returned a number of records within specific groups... but if there are no groups, he cannot give you a line for any group with its county equivalent, because there are no lines for the groups. With the grouping, you have must have at least 1 row per group to get an account for her.

• The regular expression problem

  Dear friends,

  In my script I have some sections that test the contents of an edit field before it is processed further.

  Perfectly things like the following:

  var re_Def = /#[A-Za-z][A-Za-z0-9_]+/;          // valid variable name ?
  items = ["#correct", "notcorrect", "#This_is4", "#thisIs", "@something", "#ALLOK", "", ];
  // search    0            -1          -1!!        -1!!          -1        -1!!     -1      <--- incorrect method
  // test    true         false         true        true        false       true    false    <--- correct method
  for (var j = 0; j < items.length; j++) {
    var item = items[j];
    alert ("'" + item + "' ==> " +  item.search(re_Def) + "\n" + re_Def.test(item));
  }
  var re_Def = /(\[ROW +\d+\]|\[COL +\d+\]|\[CELL +\d+, +\d+\]|Left *\(\d*\)|Right *\(\d*\)|Above *\(\d*\)|Below *\(\d*\))/;
  items = ["[ROW 17]", "[Row n]", "[ROW n]", "[CELL 3, 9]", "[CELL 3 9]", "Abbove()", "Right(3)"];
  // result  true        false      false         true         false        false         true    
  for (var j = 0; j < items.length; j++) {
    alert ("'" + items[j] + "' ==> " +  re_Def.test(items[j]));
  }
  

  But what follows always returns false, independly of the content of the string element:

  var re_Def = /{[EFJ]\d*}|{I}/;    // valid format def?
  var item = "{E27}";
  var result = re_Def.test(item);
  alert (result);                   // false !!
  

  RegEx buddy told me, that
  -l' REGULAR expression is correct
  -the result must be true, not false

  -The verbose definition of the RegEx is:
  Match is the following regular expression (attempting the next alternative only if this one fails) "{\d* [EYF]}."
  Match the character "{" literally "{}".
  Match a single character present in the list "J" "[EYF]."
  Match a single digit 0. 9 paper"\d*»
  Between zero and unlimited times, as many times as possible, giving as needed (greedy) «*»
  Match the character "}" literally "}".
  Or match number 2 below (the entire match attempt fails if it cannot match) regular expression "{i}".
  Match the characters "{i}" literally "{i}".

  Typo unrecognized? Test the faulty method?

  Results are fake, as soon as I use the list of characters []] - but look at the first block of code: there are also lists of character they are treated properly.

  The braces in the regular expression must be escaped to be taken literally:

  var re_Def = /\{[EFJ]\d*\}/;
  

  Kind regards

  JoH

• Question to submit the value of the box in a tableview

  Hello everyone, I have a tableview and a checkbox in one of the columns. However, I have problems in retrieving the value for the checkbox control in my action method. Any help to solve this is highly appreciated...
  
  My FXML:
  

  <BorderPane id="adminTab" xmlns:fx="http://javafx.com/fxml" fx:controller="controllers.TabInboxController">
  ......................................
  ......................................
       <Tab fx:id="billReferralTab" closable="false"> 
           <text>Bill Referrals</text>
           <content>
            <BorderPane fx:id="billReferralsPanel">
                <center>
                 <TableView fx:id="billReferralsDataTable"/> 
                </center>
                <bottom>
                 <VBox spacing="15">
                     <children>
                      <Separator orientation="horizontal"/>
                      <Button text="Accept the Bills" onAction="#addBillReferrals" defaultButton="true"/>
                     </children>
                 </VBox>
                </bottom>
            </BorderPane>
           </content>
       </Tab>
  ......................................
  ......................................
  <BorderPane/>

  My controller: I need to retrieve the last State (enabled or disabled) of my check boxes in the table column. However it always returns false...
  

  //All imports
  public class TabInboxController implements Initializable {
  
      @FXML
      private TableView<BillReferralDataModel> billReferralsDataTable;
      @FXML
      private BorderPane billReferralsPanel;
  
      @FXML
      protected void addBillReferrals(ActionEvent event) {
          try {
              UserBean userBean = CAClient.getInstance().retrieveUserBeanFromCache();
              String userId = userBean.getLoginId();
              ServiceLocator serviceLocator = ServiceLocator.getInstance();
              BillReferralsDataSLBeanRemote billReferralsRemote = serviceLocator.retrieveBillReferralsEJB();
              ObservableList<BillReferralDataModel> billReferralsList = billReferralsDataTable.getItems();
              for (BillReferralDataModel billReferralDataModel : billReferralsList) {
  
                  // ALWAYS displays false irrespective of my checkbox status on the screen...
                  System.out.println("isAddToHome?::"+billReferralDataModel.getAddToHome());
                  System.out.println("isPending?::"+billReferralDataModel.getPending());
  
              }
          } catch (NamingException ex) {
              Logger.getLogger(TabInboxController.class.getName()).log(Level.SEVERE, ex.getExplanation(), ex);
          }
      }
  
      @Override
      public void initialize(URL url, ResourceBundle rb) {
          UserBean userBean = CAClient.getInstance().retrieveUserBeanFromCache();
          Integer committeeId = userBean.getCommitteeId();
  
          ObservableList<BillReferralDataModel> billReferralsList = retrieveBillReferrals(committeeId);
          billReferralsDataTable.setItems(billReferralsList);
          billReferralsDataTable.setColumnResizePolicy(TableView.CONSTRAINED_RESIZE_POLICY);
          CheckboxTableCellFactory checkBoxFactory = new CheckboxTableCellFactory(Pos.CENTER, billReferralsDataTable);
          billReferralsDataTable.setTableMenuButtonVisible(true);
  
          TableColumn billIdCol = new TableColumn("Bill Id");
          billIdCol.setCellValueFactory(new PropertyValueFactory<BillReferralDataModel, String>("billId"));
          billIdCol.setCellFactory(alignmentFactory);
  
          TableColumn addReferralCol = new TableColumn("Add");
          addReferralCol.setCellValueFactory(new PropertyValueFactory<BillReferralDataModel, Boolean>("addToHome"));
          addReferralCol.setCellFactory(checkBoxFactory);
          addReferralCol.setEditable(true);
          addReferralCol.setOnEditStart(new EventHandler<CellEditEvent<BillReferralDataModel, Boolean>>() {
              
              // The control never goes in here when I click on my checkboxes
              @Override
              public void handle(CellEditEvent<BillReferralDataModel, Boolean> t) {
                  ((BillReferralDataModel) t.getTableView().getItems().get(
                          t.getTablePosition().getRow())).setAddToHome(t.getNewValue());
              }
          });
          addReferralCol.setOnEditCommit(new EventHandler<CellEditEvent<BillReferralDataModel, Boolean>>() {
              // The control never goes in here when I click on my checkboxes            
              @Override
              public void handle(CellEditEvent<BillReferralDataModel, Boolean> t) {
                  BillReferralDataModel dataObject = (BillReferralDataModel) t.getTableView().getItems().get(t.getTablePosition().getRow());
              }
          });
  
          TableColumn pendingCol = new TableColumn("Pending");
          pendingCol.setCellValueFactory(new PropertyValueFactory<BillReferralDataModel, Boolean>("pending"));
          pendingCol.setCellFactory(checkBoxFactory);
          pendingCol.setEditable(true);
  
          billReferralsDataTable.setEditable(true);
          billReferralsDataTable.getColumns().setAll(billIdCol, addReferralCol, pendingCol);
      }
  
      private ObservableList<BillReferralDataModel> retrieveBillReferrals(Integer committeeId) {
          ObservableList<BillReferralDataModel> billReferralsDataList = null;
          try {
              ServiceLocator serviceLocator = ServiceLocator.getInstance();
              
              ... ... ... ... ... ... ... ... ... ... ...
              RETRIEVE DATA FROM THE DATABASE
              ... ... ... ... ... ... ... ... ... ... ...
              
              billReferralsDataList = FXCollections.observableArrayList(billReferralsList);
              Logger.getLogger(TabInboxController.class.getName()).log(Level.INFO, "Bill Referrals Data List Size::{0}", billReferralsDataList.size());
          } catch (NamingException ex) {
              Logger.getLogger(TabInboxController.class.getName()).log(Level.SEVERE, "Failed to get EJB connection");
              Logger.getLogger(TabInboxController.class.getName()).log(Level.SEVERE, ex.getMessage(), ex);
          }
          return billReferralsDataList;
      }
  }

  Plant cells to generate checkboxes:
  

  public class CheckboxTableCellFactory implements Callback<TableColumn, TableCell> {
  
      Pos position;
      Object object;
  
      public CheckboxTableCellFactory(Pos thisPosition, Object thisObject) {
          this.position = thisPosition;
          this.object = thisObject;
      }
  
      @Override
      public TableCell call(TableColumn arg0) {
          final CheckBox checkBox = new CheckBox();
          checkBox.setUserData(object);
          TableCell tableCell = new TableCell() {
  
              @Override
              public void updateItem(Object item, boolean empty) {
                  super.updateItem(item, empty);
                  if (item != null) {
                      boolean selected = ((Boolean) item).booleanValue();
                      checkBox.setSelected(selected);
                  } else {
                      checkBox.setVisible(false);
                  }
              }
          };
          tableCell.setAlignment(position);
          tableCell.setGraphic(checkBox);
       return tableCell;
      }
  }

  My grain of data model:
  

  package model;
  
  import java.io.Serializable;
  import java.util.ArrayList;
  import javafx.beans.property.*;
  
  public class BillReferralDataModel implements Serializable {
  
      private StringProperty billId = new SimpleStringProperty(this, "billId", "");
      private BooleanProperty pending = new SimpleBooleanProperty(this, "pending");
      private BooleanProperty addToHome = new SimpleBooleanProperty(this, "addToHome");
  
      public String getBillId() {
          return billId.get();
      }
  
      public void setBillId(String billId) {
          this.billId.set(billId);
      }
  
      public final StringProperty billIdProperty() {
          return billId;
      }
  
      public boolean getPending() {
          return pending.get();
      }
  
      public void setPending(boolean pending) {
          this.pending.set(pending);
      }
  
      public final BooleanProperty pendingProperty() {
          return pending;
      }
  
      public boolean getAddToHome() {
          return addToHome.get();
      }
  
      public void setAddToHome(boolean addToHome) {
          this.addToHome.set(addToHome);
      }
  
      public final BooleanProperty addToHomeProperty() {
          return addToHome;
      }
  }

  I'm sure that I'm missing out on a minor addition. Any hint on solving this would be appreciated.
  
  Thank you.

  Hello Florent.
  I have not read all your codes but from the title of your question. I think that you are not been able to get the status of the Update checkbox. To obtain the present value of checkbox, you must update 'OBJECTS' tableview to plant cells check box. For the State of the elements of this update...

  SIMPLE ALGORIGTHM
  -CLICK EVENT IS PAST IN THE CELL (BOX)
  -FUNCTION CELL_FACTORY TRIGGERS
  -YOU WILL GET THE INDEX OF THE LINE
  -UPDATE THE TABLE VIEW "ITEMS" WITH AND UPDATE THE SPECIFIC INDEX
  -THE CHANGES WILL HAPPEN THIS WAY

  Thank you
  Narayan

• cstmt. Execute() returning false

  I'm trying to insert values into the table db help
  CallableStatement
  
  but
  cstmt. Execute() always returns false
  
  Here is the code

         try
            {
               //Connection conn = (Connection)oapagecontext.getApplicationModule(oawebbean).getOADBTransaction().getJdbcConnection();  
                 Connection conn = am.getOADBTransaction().getJdbcConnection();
                 CallableStatement cstmt = conn.prepareCall("{call apps.xx_GL_Vacancies.insert_transaction(?)}");
                 String project_id;
                 if(vo.getCurrentRow().getAttribute("VacancyId")!=null)
                  {
                   project_id=vo.getCurrentRow().getAttribute("VacancyId").toString();
                 //project_id=Integer.parseInt(project_id);
                  cstmt.setString(1,project_id);
                      pageContext.putDialogMessage(new OAException("hello"+project_id) );
                    boolean temp=cstmt.execute();
                       pageContext.putDialogMessage(new OAException("hello"+project_id+"temp"+temp) );
                     cstmt.close();
                   }                 
             
             }
                   catch(Exception e)
                      {
                       String message = "Error in Data Saving: " + e;
                       throw new OAException(message, OAException.ERROR);
                      }

  HA,

  U could perform writeDiagnostics. If yes then share the SOP

  Kind regards
  GYAN

• validation error message is not displayed for an attribute as a list of value of the entry

  Hello world

  I use jdev 11.1.1.7.0

  In my application, I created an entity Obj and Obj employees base table.

  for the attribute JobId , I took the actions listed below:

  1. in the EO staff, I created a validation for this attribute and in some cases the error message returns (the error message is "the salary is not high"):

      /**
       * Validation method for JobId.
       */
      public boolean validateJobId(String jobid) {
  
  
          if (...) {
              return false;
          }
  
  
          if (...) {
              return false;
          }
  
  
          if (...) {
              return false;
          }
  
  
       
          return true;
      }
  

  2. employees Vo, I created a LOV for this attribute (the view accessor is JobsViewObj) and I display the attribute entry of text with a list of values.

  in the jspx page, I drag / drop this attribute as below:

            <af:inputListOfValues id="jobIdId"
                                  popupTitle="Search and Select: #{bindings.JobId.hints.label}"
                                  value="#{bindings.JobId.inputValue}"
                                  label="#{bindings.JobId.hints.label}"
                                  model="#{bindings.JobId.listOfValuesModel}"
                                  required="#{bindings.JobId.hints.mandatory}"
                                  columns="#{bindings.JobId.hints.displayWidth}"
                                  shortDesc="#{bindings.JobId.hints.tooltip}"
                                  autoSubmit="true">
              <f:validator binding="#{bindings.JobId.validator}"/>
            </af:inputListOfValues>
  

  I opened the popup and I select a line in the list and then I click Ok. After that, if the validation method (validateJobId) returns false, the error message ("the salary is not high") must be show to the user. but the error message does not appear. I don't understand why this is happening.

  Can anyone guide me on this problem?

  Concerning

  Habib

  Hello Dario,

  I just found this post: http://andrejusb.blogspot.nl/2013/12/workaround-for-infamous-bug-13626875.html that apply ExceptionMode = immediate adjustment to control the use of data in DataBindings.cpx, then the error message is displayed as I hope.

  Concerning

  Habib