Values of the graph axis apex

Similar Questions

• Visualization of more values on the graph of the DAQ card

  Hello

  I acquire a Signal using the data acquisition card, the problem is that I can view only a few values on the graph of a waveform. Guide kindly of me if I want to see the points more on the graphical waveform, what I would do in my programming window.

  Concerning

  I think that you just want to use a TABLE instead of a chart.  A graph has an associated history, so that it shows more that just the last data series acquired you and wrote to the curve.

• display the values on the graph

  Hi all

  My requirement is...

  

  My work is about...

  

  It is:

  I'm not able to view the values on the graph as first screenshot.

  I tried all the options available in the properties of chart...

  Please, help me to solve this requirement, thanks...

  It's a really last, so easy to miss.

  If that's what you looked can you may close the debate and mark if necessary? It will help others who are looking for the same thing. For now, it is still this question is no answer.

• The export of certain values of the graph xy to the worksheet

  Hello

  I'm newish to labview and I'm trying to extract the values used to draw the graph XY, but only for x = 0, 10... 90, 100... 360.

  instead of extract values 361, I only need 37. I tried to use another statement, but with no success.

  Any help?

  Or use the table decimate for each 10 value in the input array.

  Mike...

• JavaScript input parameter should take the value of the element page Apex

  I have a JavaScript function which i dwonloaded ffrom net to generate bar codes

  DrawCode39Barcode(data,checkDigit).

  I call this function in the body of page attribute by using the following script

  < div id = "P5_X" > < / div >

  < script type = "text/javascript" >

  / * < ! [CDATA [* /]]

  function get_object (id) {}

  var object = null;

  If (document.layers) {}

  object = document.layers [id];

  } Else if (document.all) {}

  object = document.all [id];

  } else if (document.getElementById) {}

  object = document.getElementById (id);

  }

  Returns the object;

  }

  get_object('P5_X').innerHTML = DrawCode39Barcode('1-1-1111',0);

  < /script >

  When I run the page, the barcode for the value 1-1-1111' is generated. Please help so that when this page is running it will automatically take the value of the page item P5_X as parameter instead of hard coded value ' 1 - 1-1111'

  I think it would be simpler. You use the same id for the region and the order of the day, they must be different id

  JavaScript code can be in a dynamic action who sets fire to the loading of the page, or load Execute on the page of your page properties section.

  $('#barcode').html (DrawCode39Barcode ($v ('P5_X'), 0));

• How to get the value of the textfield to apex tabular

  Hi I have a database application in 4.2.6 with region 2 oracle apex, first region is a part of textfield and the second area is a table

  now I wanted to ask, how to get a textfield value in area of punch, and put in tabular form

  I show you the image:

  

  It asks to click on report attributes, and then change column marked with a pencil icon

  

  

• How can I reverse the y-axis to have the lowest number at the top?

  Hello, I do a study on the water level of the river and I need to invert the values of the y-axis. It is very easy to do with Microsoft Office Exel but I don't know how to do it with the number.

  I have numbers 3.6.1

  Hi I,.

  I have some difficulty to visualize data and graph is to create. In my mind, data points are projected on the chart to indicate an increase in the level of the surface of the River (or debit) level.

  Perhaps an example of data would be clearer demand.

  Kind regards

  Barry

• Extraction of a part of the graph

  I need to extract a part of the graph.

  I know the start and end point in the x-axis and I need to know the values of the y-axis.

  I used express VI 'extract a portion of the signal' but I don't get the values correctly.

  There is a picture with this, in which the part in the red zone is the part that I have to extract.

  Use get subset of waveform

• in writing the new value to the table, do not change the scroll position

  I have a program that writes a new value to a chart of every minute.  (The x axis is time).  I show the last weeks of a data value in the graph, but I also axis scroll bar visible so that users can scroll back to see the previous weeks.  The problem is that if they have scrolls in a few weeks and the graphical update of one minute that happens, the graph jumps at the present time (week last of the watch).  Is it possible to have the table simply stay put even when when a new value is written for her?

  John,

  I believe you can use the property of 'Reporter Panel updated' to achieve this.  Set the property to TRUE on a mouse of the user enter event of the chart in order to prevent the update of the table while the user moves the scroll.  Set it to false on mouse leave. I tried the same thing with a mouse to the bottom/mouse event, but it does not behave as expected.  You can PLAY autour with different events to see what works the best, but this basic technique should work.  Take a look at the attached screenshot for details.

  Dan

• How to rename the bars title, then change the properties of the graph

  Hi all
  
  I have doubts:
  1 can the title bars as a component container, graphics, etc., be changed? Exodus we can rename the product table chart
  2. don't short allows to configure the properties of the charts? as change axis Y de.4,.8 to point to only integers as 1.2?
  
  It will be really great if someone can help me on above issues.
  
  Thank you very much.
  
  Kind regards
  Amrit

  Hi Amrit,

  The values of the y-axis duplicate occur when the data that you draw non-integer values, but the table is configured to display (integer) formatting for axis y. For example, the axis is trying to show something like 0, 0.4, 0.8, 1.2, 1.6, 2.0 - but, with axis set up for formatting integers, values will truncate and display something like 0, 0, 0, 1, 1, 2. A patch has been applied for the 2.3 release for this problem and can be obtained by contacting the Oracle service (and the fix will be in the next version 2.4, if you are able to take the most recent version). Note that the fix just checks that, when it is configured for formatting integers, numbers are not duplicated on the axis y. However, if data comes to a noninteger number as 0.6, the bar height is somewhere between the graduations of 0 and 1. So if your graph tends to have, for example, small fractional values, you probably want to avoid setting up the axes to display integers, since the end of wil given by being too small compared to the scale of the axis.

  -Sasha

• Get the value of the frequency of the power spectrum

  I'm rather new to LabView and want to measure the frequency of the peak in a spectrum of power of a real signal. In addition, I want this value of frequency and amplitude to save to a file. Right now I am able to trace a spectrum of power using an express VI, which gives me the correct frequency value in the graph.

  However, I'm not able to extract the value of the frequency with different screws, I found in LabView after browsing through the various discussions in this forum. Can someone tell me please in the right direction? I use a digitizer NI PXI-5124 to record the signal in a rack of NOR.

  If it is the dominant frequency you are looking for you can use the vi extracted a single signal. You can also change this vi to include the details of the search if it isn't the dominant frequency, I have not included it in my example, but you can check it in the help file.

  Ian

• passing the value of the table to the point

  Hi guys,.
  
  I have a question about flash cards. I created a Flash (3D Pie) chart and an element. At present the 'link' of this table column is NULL, but now I want to pass the value of the column 'value' to the order of the day, when you click the value in the graph. Does anyone know how this link should be built?
  Hope you understood what I meant... If not let me know and I'll try to explain once again.
  
  
  For the moment, it's just like that:

  select  
  NULL LINK,
  s1.STATUS_NAME label,
  (select count(supplier_id) from zf_asn_summary z01 where z01.status_id = z1.status_id) value 
  
  from 
  zf_asn_status s1, 
  zf_asn_summary z1 
  where 
  y1.status_id = s1.status_id
  
  order by s1.status_name

  Thanks and greetings
  Patrick

  How about this one

  select
  'f?p='|| :APP_ID || '::' || :APP_SESSION || '::::PXX_ITEM:'|| value LINK,
  label,
  value
  from
  (select
  s1.STATUS_NAME label,
  (select count(supplier_id) from zf_asn_summary z01 where z01.status_id = z1.status_id) value
  from
  zf_asn_status s1,
  zf_asn_summary z1
  where
  y1.status_id = s1.status_id
  order by s1.status_name)
  

• DateTime on x-axis of the graph of the intensity

  How can the x-axis of a graph of intensity be configured to the DateTime data type, similar to the graphic waveform XAxis?  You can set the FormatString DateTime MajorDivisions, but has no way of installing the x-axis values.  Waveform curve has a foot (double [], DateTime, TimeSpan) function that will implement the XScale with the correct DateTime values, but the graphic intensity doesn't seem to have a similar capability.  I tried to configure the graphic intensity YAxis MajorDivisions DateTime Format string and pass then the plot function Tick values for the yScaleStart and YScaleIncrement, but it does not work probperly.  MS2012 release notes say that the curve of intensity has now an automatic formatting for displaying DateTime on axes X and Y.  I tried to use this feature to test the DateTime X and the ability to axis Y; However, the function of automatic formatting is not available for the chart of the intensity.  Any help is appreciated.

  Thank you!

  Jon

  Hello

  Try the following code piece.

              // Set the label format correctly            intensityYAxis1.MajorDivisions.LabelFormat = new NationalInstruments.UI.FormatString(NationalInstruments.UI.FormatStringMode.DateTime, "g");
              intensityYAxis1.Mode = NationalInstruments.UI.IntensityAxisMode.AutoScaleExact;
  
              double[,] data = new double[100, 100];
  
              for (int i = 0; i < 100; i++ )
              {
                  for (int j = 0; j < 100; j++ )
                  {
                      data[i, j] = (i + j) / (colorScale1.Range.Interval * 2);
                  }
              }
              // IntensityGraph only understands double values. But graph can interchange the data value from different types using the DataConverter provided by NI.
              intensityPlot1.Plot(data,
                  0,
                  1,
                  (double)DataConverter.Convert(DateTime.Now, typeof(double)),
                  (double)DataConverter.Convert(TimeSpan.FromDays(1), typeof(double)));
  

  It will be useful.

  Habim stone

  National Instruments

• Dynamics and 100% width of the HTML5 graph in apex 4.2

  I have problems with the size of the HTML5 Apex 4.2 graphic.

  Apex engine generates a call like this before the end of the page:

  (function() {apex.widget.chart ("R2294624206389386", {"type": "SVG_ONLY", "width": "800", "height": "200", "regionId": "2294624206389386"}) ;})}) ();

  He gets out of #GENERATED_JAVASCRIPT # of page template and in turn creates the graph.

  Due to being wwv_flow_flash_charts_5.chart_width of digital field, there is no way I could successfully enter and save value '100%' for the width of the graphic, so my card ever gets developed to fit the container div element.

  Does anyone have a portable solution for the same problem?

  Height and width of the graphics leave empty.

  Although these areas show a necessary asterisk, they aren't required more.

  Now, the table should automatically adapt to the size of the screen. My tests have shown that it doesn't work very well according to the models are used.

  Just try it, hope you lucky ;-)

  Kind regards

  Peter

• Add new values for the axis desabscisses when adding a new series

  Hi all

  I work with and I found myself with a problem when I try to add new series.

  < mx:ColumnChart id = "cChart" height = "100%" width = "100%" dataProvider = "{dataChart}" showDataTips = "true".
  >
  < mx:horizontalAxis >
  < mx:CategoryAxis id = "cAxis" categoryField = "{name}" / >
  < / mx:horizontalAxis >
  < mx:series >
  < mx:ColumnSeries yField = xField "{field}" = "{name} field" displayName = "{displayName}" / >
  < / mx:series >
  < / mx:ColumnChart >

  DataProvider is a table something like this:

  -Datachart - > [nameField:A, area: 20;]

  nameField:B, field: 30;

  [nameField:C, field: 80]

  In my application, user boxes add new series after the graph is created. For example, imagine that he wants to put on the table of following values:

  -Datachart - > [nameField:A, area: 13;]

  nameField:B, field: 62;

  nameField:D, field: 30

  [nameField:E, field: 92]

  Now, start the problem:

  When the graph is (adding series with ACE) refresh the values on the axis desabscisses are the same 'old'. In these cases ('A', B', 'C'), but the new do not appear (',' E').

  Is there anyway to fix this?

  Replace this part:

  var currentChart:Array = cChart.series;
  currentChart.push (series1);
  cChart.series = currentChart;  This code do nothing!

  with

  var currentChart:Array = cChart.series.reverse () .reverse ();
  currentChart.push (series1);
  cChart.series = currentChart; But this one does!

  This is to ensure that you will create a NEW array instead of use the reference to the former.