Vandalized monitor A730 help!
Still starts and the screen lights up but broken glass prevents the "mouse pointer" control and you cannot select anything on the screen.
Is there anyway I can access by using different monitor?
Thank you
Vacuum out the pieces of glass.
Then able to see well enough to move to the other monitor.
Thank you
Tags: Lenovo Desktops
Similar Questions
-
Mac Pro: 5 Monitor Configuration help
Hey guys!
I have been working on a fairly massive project and am in need of some specific knowledge, Mac Pro, I did not.
We will use the end 2013 Mac Pro as our work computer to bid on multiple auctions on multiple screens simultaneously. To illustrate the concept:
* Forgive my skills as God art *.
The problem we run into is wiring all 5 screens for the Mac Pro. Poster 2-5 have only the HDMI and VGA inputs. We are in need of the best possible quality who can offer screens of theses, my idea was just to pick up MiniDisplay 4 HDMI adapters to connect to the wall mounted monitors and use a Thunderbolt cable to connect the Thunderbolt Display. However, I have been informed and influenced in the delicate on the Mac Pro website formulation in the belief that the end of 2013 Mac Pro can handle 2 HDMI monitors.
I would like to know your opinion on using MiniDisplay 4 HDMI adapters or not will work. And if no, what is the way to achieve the best quality on the whole upward.
I thank very you much for your time and help!
-Austin
The 2013 MP can handle two monitors inherited (HDMI and DVI) with the cheaper passive miniDP > HDMI or DVI adapter. For more than two adopters must be active adapters.
All adopters VGA are active.
This is an active NPD > adopting HDMI
http://www.Newegg.com/product/product.aspx?item=N82E16815158351
-
Card ATI Radeon 4570 - NO SOUND in my monitor: Please help!
Hello
I use Sony Vaio NW160 and have been using my HDMI cable to connect to my samsung TV and it works fine.I bought a new monitor (LG 235V) HDMI... and I am unable to get any video sound is fine. I currently have Windows Vista.1. the HDMI cable is fine as I tested it with my TV again2. the port monitor works great as my other laptop with HDMI out works fine with this monitor.3. the current driver ATI Radeon 4570. I tried the upgrade of the driver by using the Device Manager but I received a message saying that it is up-to-date.I don't see any support site that talks about information about updated drivers.Help, please! Thank you in advance!You have HDMI on the list:
Start-> Control Panel-> Sound-> reading tab?
If Yes, is it defined as default playback device (must be).
Try to download and install the latest graphics driver package from the manufacturer of your PC or, Alternatively, than ATi/AMD (rather than using the Device Manager directly to day).
-
can faulty monitor, someone help?
I bought my monitor 10 months ago, but in recent weeks his developed a fault and was referred to acer twice now and they have not repaired properly. Here telling me now that theres nothing wrong with it then ive made 3 videos and posted on youtube. Would you please take a look and tell me if this is normal for a monitor. Im having problems running and ive tried different video inputs show its very hit and Miss. Any advice would be appreciated.
https://youtu.be/x2rtNu1bGMo .. .test 1 - connected power alone (edited to remove my address)
https://youtu.be/LOXNvuryIAI ... test 2 - input connected DVI
https://youtu.be/VZ6PnE6l2-0 ... test 3 - hdmi input test
Last updated: after sending my monitor in the center of repair Acer four times to repair the same fault, they have finally seen the light and replaced the monitor for a new brand. If there is a small Board that I would pass it to someone else who suffers several times with an Acer product, it would be a movie question, put it on youtube and send Acer a link to the video. Also his challenge is emailed to the team as they seem to have more power to solve your problems. Front line staff but just to give you the copy gineric and paste society speal whilst the team seems more human and can actually fix your current problems (many thanks to AngryAsir for providing me with there email address) unfortunately I can not post e-mail address here it will get removed.
The good points of Acer: fast free support to the top and delivery service for items under warranty
Bad Acer points: probably there repair center. Honestly, if I was as bad at my job, because they are where I work, I'd get the bag in the first week.
-
I have a macbook pro and I have PS, and ID CS6 but I have lost the serial number... Please help!
Please go through: https://helpx.adobe.com/x-productkb/global/find-serial-number.html
-
How to disable/BPEL/BAM monitoring running help
Hi all
How to toggle the integrated monitoring of BPEL for BAM (which uses the Express data objects of the monitor) during execution.
Thank you!Hello
Here you can find the documentation for your all queries concerning the deactivation/activation and other things too.
http://docs.Oracle.com/CD/E25054_01/admin.1111/e10226/soacompapp_mang.htm#CEGJECJF
The advantage of the activating/deactivating the monitoring of execution is. Monitoring of Composites led a charge of overload in servers or BPEL process. Thus his gives some performances to publish.
This option so we can handle load on process. His means that when you want to monitor you can if not disable.Best regards
Shiva Shankar
TechDemocracy -
Hey guys!
I have a 3.0 host running esx, for some reason hosts the 4.0 kept crawling on 3 simple servers and I suspect a hardware problem, anywyas
what I do email alert configuration instant admin? I mean if a virtual machine is slow or restarts or stop?
We do not have vcenter configuration but then, how to do it please
Thank you
RJ
We will all live a virtual life...
You can use Veeam Monitor (there is also a free version).
André
-
Monitors flicker and "Input Signal Out of Range"
Hello!
I have a Mac Mini (end 2012) 2.3 GHz Intel core i7 running up-to-date El Capitan, with two HP monitors 2071d.
These monitors have DVI connections. It is connected with Mini DisplayPort to DVI adapter, and the other with HDMI to DVI adapter (provided with the Mac Mini).
Everything has been fine for a year until this week. Two monitors are:
(1) intermitantly began flickering of the scrambled images
(2) flickering intermittently at black or white noise
(3) intermittently flickering white noise
(4) the message of the form 'input out of range Signal. 1600 x 900 at 60 Hz settings."
How is this problem go and come, but rather continues today.
After research, I tried to start safe mode, but the problem persists.
I read that put the computer to sleep and then wake up could solve this problem... it worked a
couple of times, but the issue soon returned.
I tried to reset several times VRAM/LANDAU and SMC.
I doubled checked all the connections.
Under the system of preferences > display (when the image is stable long enough for me to see) everything looks OK. Under the screen of the 'Default display' tab is selected. On the color tab, there are three HP2071d listed (with a selected) in the window display profiles. I've linked by selecting one of the other "HP2071d" listed without noticeable change.
I also reset both monitors to factory settings via the menu screen of the monitors.
I also came across this mini Mac EFI Firmware Update 1.7 for flickering on end of 2012 Mac Minis, but when I tried to run I got "this software don't is not supported on your system. Ugh. It turns out that my Mac Mini is already updated to MM61.0106.B0A (2015-002)
My Information System > Hardware > graphics/display info is:
Graphics Intel HD 4000:
Chipset model: Intel HD Graphics 4000
Type: GPU
Bus: integrated
VRAM (dynamic, Max): 1536 MB
Seller: Intel (0 x 8086)
Device ID: 0 x 0166
Revision ID: 0 x 0009
Exhibition:
HP W2071d:
Resolution: 1600 x 900 at 60 Hz
Per pixel: 32-bit color (ARGB8888)
Display serial number: 6CM3171PFF
Mirror: on
State of the mirror: mirror material
Online: Yes
Rotation: support
HP W2071d:
Resolution: 1600 x 900 at 60 Hz
Per pixel: 32-bit color (ARGB8888)
Display serial number: 6CM3170P31
Main screen: Yes
Mirror: on
State of the mirror: mirror of Master
Online: Yes
Rotation: support
I am of the ideas of what else to check/try.
Thanks for any assistance that anyone can provide.
bdcs64 wrote:
Hello!
I have a Mac Mini (end 2012) 2.3 GHz Intel core i7 running up-to-date El Capitan, with two HP monitors 2071d.
These monitors have DVI connections. It is connected with Mini DisplayPort to DVI adapter, and the other with HDMI to DVI adapter (provided with the Mac Mini).
Quite the same configuration except here, with 2 Samsung S22B310 DVI monitors on an i5 2.5 GHz in late 2012.
Everything has been fine for a year until this week. Two monitors are:
(1) intermitantly began flickering of the scrambled images
(2) flickering intermittently at black or white noise
(3) intermittently flickering white noise
(4) the message of the form 'input out of range Signal. 1600 x 900 at 60 Hz settings."
How is this problem go and come, but rather continues today.
Both monitors isn't good. Which would lead us to think that the Intel HD 4000 is overheating and the problem is not with any of the adapters or cables. Although, if one of the cards was not internally, it could put additional heat stress on the graphics chip.
Personally, I will try a few things.
1. turn off, unplug everything, open the bottom cover and give it a good cleaning to make sure it cools properly.
https://www.iFixit.com/device/Mac_Mini_Late_2012
2. try each monitor individually for awhile configurations see if the problem follows the monitor cable adapter installation.
(I know he'll be a brake after obtaining used monitors to double)
3. try using > MacFanControl to monitor and help control the temperature of the GPU ITPP.
http://www.CrystalIDEA.com/Macs-fan-control
FWIW, I do not use screensavers, but I do a lot of videos as well as some games of light on both my 2010 and 2012 of the Mini and I really believe that MacFanControl has really helped to extend the life of graphics on these two systems.
I use the control based on the sensors on the sensor of GPU ITPP and configured so that it starts slowly rise in power of the fan above 129' F
-
Qosmio X 305-bad image on the external monitor quality
My x 305-701 has excellent image on the original monitor, but if I connect the laptop to Acer 22 ' VGA cable I get a blurry image on the external monitor only.
It does not matter if I use two monitors at the same time or just the Acer, the external monitor is always blurred the laptop monitor is always perfect. I tried the external monitor in 1440 x 900 and 1680 x 1050 and have adjusted the frequency of refresh of all available parameters, 59 Hz, 60 Hz and 75 Hz, and the blurred image is still there.
I love this Qosmio and appreciate it even more on the widescreen monitor any help would be greatly appreciated.
I know that LCD screens are blurry if set to non-native resolution. I think you need to set the correct resolution for the external monitor. Check your external display native resolution and set in display settings.
-
Anyone WHO is running 2 monitors from lightning on a Mac Mini (Windows 7)?
Did someone drive actually two screens Thunderbolt out of a Mac Mini (late 2014, complete the form below) in bootcamp with Windows 7? Apple says you can do (see below), I couldn't, and I'm pretty technically competent. Windows 7 in Bootcamp runs absolutely perfectly, I used all the latest drivers and drivers from Bootcamp OK/set of tools for my machine (Apple publishes sets of specific tools for each machine). Windows just absolutely does not see the second monitor Thunderbolt, I went through each option of control panel in Windows 7. To do this, of course, works very well under OS X. I am currently using Parallels to work around the problem, but the decline in performance is much too tight, and I need to run Windows directly in the training camp with two monitors. Help, please.
Are the two monitors of TB Garland or connect directly to the Mini?
-
I recently acquired a TOSHIBA monitor model No. DA1566M-01 which was manufactured in December 1996. can someone help me identify this monitor or help me to find technical information about him?
It also has a control Module attachable LCD attached to show a model number of PMD-C0455I can't find drivers or any other information about this monitor or screen LCD suite mod.
can anyone help?
I hope this can help you:
http://members.DriverGuide.com/driver/detail.php?DriverID=79371Good bye
-
30 "monitor works only in the resolution of 1280 x 800 on MacPro 3.1
I gave a HP LP3065 30 '' screen and connected it to my MacPro 3.1 (2008) via cable dual link DVI - D.
The only resolution that works is 1280 x 800, but obviously I'm looking to run 2560 x 1600. I can choose other resolutions, but, in doing so, I get a crazy movement across the screen color.
I have a secondary monitor, who works at resolutions higher via an adapter dvi / vga
I tried to hook up the monitor to the two DVI ports on the back of the MacPro, with or without the second monitor, nothing helps.
I also tried all the monitor DVI inputs. But there is no VGA or HDMI input.
I'm on OS X 10.6.8 due to some compatibility issues with some software, I am running - this could be the problem?
Or would it be a questionable dual link DVI - D cable?
Any help greatly appreciated
Data sheet:
Model name: Mac Pro
Model identifier: MacPro3, 1
Processor name: Intel Quad - Core Xeon
Processor speed: 2.8 GHz
Number of processors: 2
Total number of cores: 8
L2 cache (per CPU): 12 MB
Memory: 22 GB
Bus speed: 1.6 GHz
Boot ROM version: MP31.006C.B05
Version of the SCM (System): 1.25f4
Serial number (System): CK8260F1XYL
Material UUID: A20B53A7-55CB-5DB4-B540-74EE815E0B99
ATI Radeon HD 2600 XT:
Chipset model: ATI Radeon HD 2600
Type: GPU
Bus: PCIe
Slot: Slot-1
The PCIe track width: x 16
VRAM (Total): 256 MB
Seller: ATI (0 x 1002)
Device ID: 0 x 9588
Revision ID: 0x0000
ROM revision: 113-B1480A-252
EFI Driver Version: 01.00.252
Exhibition:
HP LP3065:
Resolution: 1280 x 800
Per pixel: 32-bit color (ARGB8888)
Display serial number: CZN821309M
Main screen: Yes
Mirror: Off
Online: Yes
Rotation: support
L194W:
Resolution: 900 x 1440 @ 75 Hz
Per pixel: 32-bit color (ARGB8888)
Mirror: Off
Online: Yes
Rotation: 270
Try a different cable, dual-link.
However, since you said "I can choose other resolutions, but, in doing so, I get a crazy mobile color across the screen." you card graphics could be at fault. First, open the side cover and make sure that the fan turns freely and that the fan and cooling areas are free from accumulation of dust and dirt.
-
Toshiba Gigashot A100 FE can't see videos on the monitor of the cam
Hello
I have a big problem with this camcorder.All of the programs that I cannot read the Hd support and if I connect MY camcorder to the TV, it seems very broad and I don't see any screen that appear on the LCD of the cam.
The program comes with the bug of cam with 2 PC with Vista and XP.
I can t see my work except in the cam monitorHelp me, if there is a solution
Excuse my English bed I m from France
Thank youHello
Have you checked the cam settings? There you can set TV out and choose between 16:9 and 4:3 output. You have a 16:9 TV?
> The program bundled with the bug of cam with 2 PC with Vista and XP.
Sorry, but this is not understandable to me. What so you mean exactly? You have access to the data and if you connect your can on the PC? -
Remove the keyboard from the monitor
I put the keyboard on the screen, now I can't remove it. Help! Michele thanks
How can I remove my keyboard of my monitor? Help me please!
According the information you provide, I'm guessing that you have opened to the top on the screen keyboard and now you want to close. But unfortunately, we do not know the version of Windows that you are running.
For Windows XP, you should have the close button in the upper-right corner of the keyboard, you can click once to turn it off. You can learn more about Windows XP keyboard on screen here.
For Windows Vista and Windows 7, take a look at the following web page. There is a tutorial which explains how to disable the on-screen keyboard:
http://www.Vistax64.com/tutorials/72733-screen-keyboard.html
If you are running other versions of Windows operating system, let us know about it. You can read the following article to determine the version of the Windows operating system you are running:
What version of the operating system Windows am I running?
http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-runningHope the helps of information.
-
My acer apirse 8930 monitor is out of sync
original title: my acer 8930 monitor apirse malfunctioning outputs work fine just the drivers reinstalled main monitor any help?
the laptop screen is kind of out of sync, there are two sections that the top 3/4 is kind of the opac and down 1/4 looks like thw top 1/4 If you know what I mean! also the extrenal hdmi and vga work very well...
Hello
go to the link below and look for the latest Acer drivers
http://support.Acer.com/us/en/product/default.aspx
If the problem persists contact your computer acer laptop screen:
Maybe you are looking for
-
Undetectable key logger?
I saw a key recording software that says "undetectable" sound on a Mac. I think I may have something on my Mac, I looked for the community for the recording of the key software, I'm not on the computer. So-called undetectable software, is there anyw
-
Hi all I have a Satellite A210 FS3 as reference to my first PC Toshiba laptop, so I don't have good knowledge in IT.I Windows Vista and that you want to reinstall, so I don't have cd backup, do not have backup in the D partition and can't find this r
-
I'm unable to sign my computer to the appearance of the Windows form.
Windows 7 Edition Home Premium
-
side-by-side configuration is incorrect for msn messenger
To the right Hello I would like to ask questions about my msn messenger I tried to open the msn Messenger and he gave me: C:/Program Files/Windows Live/Messenger/msnmsgr.exe The application has failed to start because its side-by-side configuration
-
Compaq Presario c300 - Windows XP Recovery disk is not hard drive
Compaq Presario c300 - S/No: CND6441F50 Prod No.: #ABU - Windows XP Media Center RT150EA When you try to restore a new copy of Windows XP and after booting with a Windows startup disk, download to the point where you can select "recovery or install n