Identification of the monitor

Similar Questions

• App for free weights and the monitoring of sleep

  I'm new to Apple Watch and would like suggestions on application of lifting weight, and also for the monitoring of sleep.

  I had very mixed results with 'sleep followed' apps for the  watch. I landed on an application for the phone called sleep Cycle that uses the microphone on your phone, sitting on the nightstand next to you to track sleep instead. Don't ask me how it works, but it does. He also knows that my wife is using the application itself across the bed and that is not what we do mixed.

  Can't help much with weight lifting, sorry... I have gave for years ready. : PEI

• Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  N ° you need a computer logic board which has built in Thunderbolt.

• the monitor shows and heart on an indoor bike can be coupled to a workout

  during a class of inner rotation can Apple Watch and the cycle monitor be coupled so I can monitor my heart rate on the monitor of the cycle?

  Hello

  Apple Watch can be paired with a Bluetooth external heart rate monitor.

  More information:

  Use the Bluetooth with your Apple Watch - Apple Support Accessories

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

• Firefox has only display problems in the upper left region of only my Dell U3011 monitor; the monitor does not have these problems with any other application

  Some parts of the Firefox window are translucent, allowing the image of the desktop to show through. These regions are anything but great internet site central image which behaves normally. Unless the desktop is completely black this problem makes reading the tabs, address bar and the bookmark are difficult if not impossible. I encounter this problem only on my new Dell U3011 monitor. Firefox is the only application that has this issue on the Dell monitor. The monitor built into the laptop that animates the Dell monitor does not exhibit this problem. The laptop is a Lenovo W540 running Windows 7 64-bit. Thank you very much for your help. Steve Schupbach

  Hello stevesch

  first see : problem with Firefox going transparent troubleshoot and find a solution

  then with patience to see:

  questions/940393

  questions/940389

  questions/940374

  questions/940377

  questions/940384

  questions/940395

  Thank you

• HP Pavilion DPGEK44 Gaming: HP Pavilion Gaming DPGEK44 connected via the monitor HP Pavilion 24xw - no sound

  The sound on my laptop works fine until I connect it via HDMI to a monitor HP Pavilion 24xw.  Then the sound disappears.  If I disconnect it, the sound comes back.

  I tried to go to the 'Sound' of the control panel section.  There are two options:

  Realtek High Definition Audio speakers

  HP 24xw

  The default value is Realtek speakers.  When I use the test installation my laptop plays the sound test.  I've updated to the latest version of the driver.

  If anyone can help with why where the monitor audio disappears from my laptop?

  Thank you very much!

  Hi @Cat999,

  Welcome to the HP Forums!

  I understand that you have problems with your HP Pavilion Notebook DPGEK44 game, when you connect the HDMI cable to a HP Pavilion 24xw monitor. I'm happy to help you!

  Please try the steps in this guide, Troubleshooting HDMI screen and sound Issues.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• Satellite A500-1GL - the monitor turns off

  Hi I have a problem,

  in the last time my screen turns off but not alweys.

  Times when it fires:
  Occasionally, sometimes after the picture windows sometimes runs without problem. Three times a minimum of departure.

  Times, when it runs:
  -without adapter
  -play games of blizzard, AC adapter
  -When the TV is connected via the hdmi adapter

  I have this problem:
  -Clean the laptop from the inside, Don t help
  -new windows installed, Don t help

  The only time where the monitor has failed, I leave the laptop to watch if the monitor goes back to the.
  But not 72 hours came to nothing.

  Please help me, I m helpless

  On this virtual path, it is not easy to say why this is happening. Unfortunately, I think that there is not much you can do about it.
  Just in General, I imagine there is a connection problem, but it must be the subject of an investigation.
  Try contacting the closest service provider of Toshiba, to explain the situation and ask for help.

• HP 2311 x buttons on the monitor does not

  My monitor has decided that he does not want to turn off, or let me any setting.  Sometimes it works, sometimes it doesn't.  However more recently, he decided not do not work any more work.

  None of the buttons work, I get no message on the screen, I can't turn it off or change the settings.  I just got the monitor there are 3 or more months and this just started happening recently.  He did that sit on my desk.  Anyone with experience please help me!  I have an LG which is 2 years old and everything still works very well on this subject, it's not that I play with anything other than the power buttons, but it's pretty boring.  Any help is appreciated.

  Hi Paul,.

  Your monitor is covered by the warranty for a year if you bought it new.  Maybe you need to contact HP support.  HP support number is 800-474-6836 or 800-HPINVENT or online here.

  Try a reset of the monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.

• Equium M50 - 192 - I get nothing on the monitor

  Hi all

  I m in trouble with the screen on my laptop. When the computer is turned on, I get nothing on the screen, not even the backlight. If I turn then to the computer market several times, then the monitor will work.
  Once it works there is no problem. If I have a connected external projector that works very well, but I still have nothing on the screen.
  Anyone have any ideas?

  Thanks in advance.
  Steve

  When the external projector is connected, you can switch between the projector and LCD using the FN + F5 key combination? What is your laptop pre-installed with recovery image?

  Before you disconnect it external projector please go to the laptop LCD screen using FN + F5 key combination. When the office is back on the LCD screen, remove the connection cable.

• Satellite Pro P300 - Fn + f5 combination does not change the monitor

  On two laptops of P300, we have a problem that the fn + f5 combination does not change the layout of the monitor.

  If you press fn + f5, you see the bar where the different modes are displayed, but if you release the layout remains the same (laptop as a single monitor)

  Thank you, best regards,.

  Davy

  Hello

  In my opinion the previous action (installation of the catalyst hotkeys and reinstalled the hotkey driver) is the reason why the FN + F5 does not work properly.

  In my opinion, you should clean the registry first.
  Use CCleaner. It s free and cleans up the registry.
  In addition, you must remove the catalyst shortcut keys because this may affect the Toshiba FN Hotkey feature.
  Finally, install the Toshiba drivers from the Toshiba page
  More info (right on the Toshiba driver page), you will find details on the tools simple and drivers and what are they for...

• PS2 and Qosmio G20 - use of the monitor button, it just sounds

  Could someone please help? Hooked my ps2 using the composite cable but when I press the monitor just button, it beeps and does nothing.
  I know that the plug is broken can I get a picture through win DVR.
  Any suggestions would be greatly appreciated. Thank you

  1. open programs, then
  Improving the image-utilities-2 utilities. Toshiba
  3 monitor the setings of entry
  4. Select monitor IN or S video IN
  5. apply the settings

  Enjoy

  min

• Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls.

  I have an iphone 6. Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls. Help, please.

  It is a problem of carrier - I would like to talk with my carrier

  Your signal may be weak or you can be in a dead zone - or there may be interference - those that can cause the call to go directly to voicemail

• Satellite A200 - 1 M 8: the monitor shuts off and cannot back up to Vista

  Hello

  I have the Satellite A200 - 1 M 8 with original Vista. Sometimes, I have some problems with the display (I have the latest drivers).
  The monitor turns off (not as usual but it is gray instead of black) applications flow normally (I hear the music of film, this) but I can't get back into windows.

  When I push button hibernation and I try to go back to windows, I see the blue screen then the computer resets.

  It happens very often and is really frustrating because my internet disconnects and downloads.

  I don't think that the temperature is too high because I think it's cool. How to fix this?
  Maybe some graphics settings or new BIOS?

  Please help me. I can't stand it!

  null

  Hello

  Your laptop is preinstalled with recovery delivered image, or if you have installed your own operating system?

  I have the Satellite A200-1CR preinstalled with original Toshiba Recovery DVD. I use the laptop quite intensively all day, but I never noticed anything like that. Since when did you notice this strange behavior?

• 750se envy: envy of the brand new office no signal to the monitor via HDMI

  Just got my new 750se envy and 25 x 25 backlit monitor. After putting it all together, I connect the monitor of the Tower via HDMI. Tower boots, display lights, I pop in setting up the drive, but the monitor says that it cannot find a signal. I test my old monitor to the new Tower (a monitor of series pavilion aged 7 years). Same results. The Tower seems to be the treatment given that you can hear what it read the disc.
  
  I take another hdmi cable and and test exactly as described above. New monitor, new Tower and new hdmi cable still no signal. Old monitor, new Tower and new hdmi cable still no signal.
  
  Just to be sure, I plug my new monitor to my old HP Pavilion desktop computer. Tower lights up as usual, and the new monitor immediately comes to life with color. I can safwly guess it's the tower. I open the side panel and check all jacks to make sure they are warm and fully attached. Nothing seems to be loose or out of place.
  
  I start to sting online for answers. I met this reset of the BIOS. Press F10 to 8 seconds, down, 3 times arrow, enter twice and restart. Nothing. Still no signal. Can I assume there is something wrong with the Nvidia GeForce GTX 960 and windows the cause? Maybe turn hdmi ports are messy? It was the only other subjects I really found on the issue. Everything seems to work, just no signal between the monitor and Tower.

  89kowens

  Since it is a relatively new machine, instead of hurt for hours to fix yourself, why not just let HP repair at our expense!
  
  You must contact the HP Customer Support directly so they put you in contact with HP Tech Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  Good luck

• Satellite 4100XCDT: how to set up the monitor

  Hello
  I recently bought a Satellite 4100XCDT, he had no operating system, so I installed Windows 98 Second edition on it. I installed the audio driver and the graphics driver and they work fine, but I can't configure the monitor. Whenever I start it detects TWO monitors plug-and-play for some reason any. I can't see a driver on the Toshiba site and don't know what to do. I tried setting up as a Billboard Mobile, but failed.

  I hope someone can help,
  Thank you.

  Hello

  On the download from Toshiba site there is display driver for Win98SE (version 6.45.5441 - 58.22). Try to use it.

  http://support.toshiba-tro.de/tools/satellite/s4070-90-100/Windows-95-98/Windows-98/display-Win98-64554415822.zip

  Good bye