Variable shared do not get updated in host VI

Hi all

I recently bought a surfboard myRIO and began working with her. I would like to use the shared variable to get the rates of local lines all in porting my labview code later. However, I am not able to use the shared variable functionality at all, even for a simple code. I created a variable that is shared in the host pc and used in the RT and host VI. I guess that when I run the RT VI and VI of the host, the value given to the variable of the RT VI should be included in the host VI. However, this is not the case. The indicator to the host VI is still zero himself. I went through all the threads of myRIO related, but could not get any guidance. Thanks in advance.

Arya

Hi Sam

The program works now. I find this strange because I didn't have even a single change on my system, not even a reboot. I have a open and run the example of shared variable comes with labview. It worked fine, then I tried my code, and also, it began to update the loop counts. Quite strange! Thanks for the reply.

Arya

Tags: NI Products

Similar Questions

Host is not get updated in VC

I'm hardware CPU that it became Red alarms so I've migrated a few VM to host different, States of the processor remains the even though the percentage of CPU is 75%. The VC is not get updated, I use ESXi please suggest me what to do

If it's an ESXi host and then restart the management agent

1. connect to the host

2. restart the management agent

3. press a few minutes

4. She will get updated

LOV dependent parameter is not getting updated

Dear gurus,
I use the method below to copy a line and go to the createInsert page is to copy attribute values navigate successfully as expected, there are a few dependent LOV on my page. Passage in depenent LOV of parameters is not getting updated.
For example, the StateNameId attribute is text input LOV using StateVO for LOV and set the values of the attribute state name, State. and it has dependent attribute like L1ApproverId which is also a LOV input text that uses L1ApproverVO for LOV, L1LOV takes the State as a parameter to retrieve values based on the State.
When you click on L1ApproverLOV it gives old discs only, even if that we tested with StateNameId. Kindly help me out.
Here is the source.
{} public void copyProposal (actionEvent javax.faces.event.ActionEvent)
Add the code in the event here...
System.out.println ("inside the copyProposal method :::"); ")
AdfFacesContext adfctx = AdfFacesContext.getCurrentInstance ();
java.util.Map pageFlowScope = adfctx.getPageFlowScope ();
String userName = (String) pageFlowScope.get("user").toString ();
Date date = new Date();
System.out.println ("date:" + date);
Dim date1 = new SimpleDateFormat("dd-MMM-yyyy").format (new Date()) m:System.NET.SocketAddress.ToString ();
System.out.println ("date1:" + date1);
String date2 = new SimpleDateFormat("mm/dd/yyyy").format (new Date()) m:System.NET.SocketAddress.ToString ();
Calendar currenttime = Calendar.GetInstance ();
Date sqldate = new Date ((currenttime.getTime () .getTime ());
System.out.println ("current Date_Time:" + sqldate);
AppModuleImpl am = this.getAm ();
ViewObject proposalHeaderVO = am.getProposalHeaderView2 ();
Line propHeaderCurrentRow = proposalHeaderVO.getCurrentRow ();
String [] propHeaderAttrs = propHeaderCurrentRow.getAttributeNames ();
Skip copying the attributes of primary key or attributes that you want to ignore
String [] skipAttrs = new String() {"BranchProposalNumber", 'BranchHoSerial', 'ProposalId', 'ProposalDate', "CreationDate", 'ApprovalStatus', 'Attribute9', 'Attribute10',
'ProposalAmt', 'ApprovalRemarks', 'ApproverRemarkTemp', 'BudgetAmt', 'ConsumedAmt', 'RemainingAmt', 'AmountUtilized'}; , 'L1Approver', 'L2Approver', 'L3Approver', 'L1Code', 'L2Code', 'L3Code '.
The skipAttrList list = Arrays.asList (skipAttrs);
creating a new duplicate row
Line dupRow = proposalHeaderVO.createRow ();
copy all of the attributes of a
for (int i = 0; i < propHeaderAttrs.length; i ++) {}
String propHeaderAttrName = propHeaderAttrs [i];
int attrIndex = dupRow.getAttributeIndexOf (propHeaderAttrName);
Check if the attribute is in the attribute of jump list and that the attribute is updateable
If (! skipAttrList.contains (propHeaderAttrName) & &)
dupRow.isAttributeUpdateable (attrIndex))
Setting the value for the attributes
dupRow.setAttribute (propHeaderAttrName,
propHeaderCurrentRow.getAttribute (propHeaderAttrName));
dupRow.setAttribute (propHeaderAttrName,
// "Pending");
System.out.println ("name of the attribute:" + propHeaderAttrName);
}
dupRow.setAttribute ("AdfCreatedBy", userName);
dupRow.setAttribute ("Attribute10", userName);
dupRow.setAttribute ("ApprovalStatus", "pending");
dupRow.setAttribute ("L1Approver", propHeaderCurrentRow.getAttribute ("L1Approver"));
dupRow.setAttribute ("L1Code", propHeaderCurrentRow.getAttribute ("L1Code"));
dupRow.setAttribute ("L2Approver", propHeaderCurrentRow.getAttribute ("L2Approver"));
dupRow.setAttribute ("L2Code", propHeaderCurrentRow.getAttribute ("L2Code"));
dupRow.setAttribute ("L3Approver", propHeaderCurrentRow.getAttribute ("L3Approver"));
dupRow.setAttribute ("L3Code", propHeaderCurrentRow.getAttribute ("L3Code"));
dupRow.setAttribute ("Attribute7", propHeaderCurrentRow.getAttribute ("Attribute7"));
dupRow.setAttribute ("ActivityType', propHeaderCurrentRow.getAttribute ("ActivityType"));
dupRow.setAttribute ("the HierarchyName", propHeaderCurrentRow.getAttribute ("the HierarchyName"));
dupRow.setAttribute ("HiqBrandManager", propHeaderCurrentRow.getAttribute ("HiqBrandManager"));
Insert the duplicate line
proposalHeaderVO.insertRow (dupRow);
EXECUTION of SETPARAM for SelectActivities...
String activityType = (String) propHeaderCurrentRow.getAttribute ("ActivityType");
activityType = activityType.substring (0, activityType.indexOf("-",0));
System.out.println ("value by activity Type:" + activityType);
setParam (activityType);
}
< af:inputListOfValues id = "stateNameId".
popupTitle = "search and select: #{bindings." StateName.hints.label}.
value = "#{bindings." StateName.inputValue}.
label = "State of GPI/location.
model = ' #{bindings. " StateName.listOfValuesModel}.
required = "#{bindings." StateName.hints.mandatory}.
Binding = "#{backingBeanScope.backing_ProposalSearch.stateNameId} '"
labelStyle = "' make-weight: Bold" "
valueChangeListener = "#{backingBeanScope.backing_ProposalMaster.stateNameId_valueChangeListener} '"
returnPopupListener = "#{pageFlowScope.ProposalActivities.returnStateNamePopUpData} '"
autoSubmit = "true" >
< f: validator binding = "#{bindings." StateName.validator} "/ >"
< / af:inputListOfValues >
{} public void stateNameId_valueChangeListener (ValueChangeEvent valueChangeEvent)
Add the code in the event here...
AppModuleImpl am = this.getAm ();
ViewObject propHdrVO = am.getProposalHeaderView2 ();
Line rowHeader = propHdrVO.getCurrentRow ();
System.out.println ("attribut1 =" + rowHeader.getAttribute ("Attribute4"));
rowHeader.setAttribute ("L1Approver", null);
rowHeader.setAttribute ("L1Code", null);
rowHeader.setAttribute ("L2Approver", null);
rowHeader.setAttribute ("L2Code", null);
rowHeader.setAttribute ("L3Approver", null);
rowHeader.setAttribute ("L3Code", null);
rowHeader.setAttribute ("BrandManager", null);
rowHeader.setAttribute ("Attribute6", null);
String state_old = (String) valueChangeEvent.getOldValue ();
Status string = (String) valueChangeEvent.getNewValue ();
System.out.println ("value in old state:" + state_old);
System.out.println ("value in State:" + State);
}
{} public void returnStateNamePopUpData (ReturnPopupEvent returnPopupEvent)
RichInputListOfValues = lovField
(RichInputListOfValues) returnPopupEvent.getSource ();
ListOfValuesModel lovModel = lovField.getModel ();
CollectionModel = CollectionModel
lovModel.getTableModel () .getCollectionModel ();
JUCtrlHierBinding = treeBinding
CollectionModel.getWrappedData ((JUCtrlHierBinding));
selected lines are defined in a RowKeySet.As the LOV table only
supports simple selections, there is only one entry in the rks
RKS RowKeySet = returnPopupEvent.getReturnValue ((RowKeySet));
the key of table row ADF Faces is a list. The list contains the
oracle.jbo.Key
TableRowKey = rks.iterator () .next () (list);
Retrieves the iterator binding for binding mapping LOV
DCIteratorBinding dciter = treeBinding.getDCIteratorBinding ();
get the line selected by its key Houston
Key = tableRowKey.get (0) (Key);
stateCode = key.getAttribute (0) m:System.NET.SocketAddress.ToString ();
setIsApproverDisable (stateCode);
}
< af:inputListOfValues id = "l1ApproverId".
popupTitle = "search and select: #{bindings." L1Approver.hints.label}.
value = "#{bindings." Label L1Approver.inputValue}"=" ASM/MMR.
model = ' #{bindings. " Required to L1Approver.listOfValuesModel'} = 'true '.
columns = "35" shortDesc = "#{bindings." L1Approver.hints.ToolTip}.
Binding = "#{backingBeanScope.backing_ProposalSearch.l1ApproverId} '"
labelStyle = "' make-weight: Bold ' showRequired = 'true'"
partialTriggers = "stateNameId" >
< f: validator binding = "#{bindings." L1Approver.validator} "/ >"
< / af:inputListOfValues >
<? XML version = "1.0" encoding = "windows-1252"? >
<! DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd" >

< ViewObject
"xmlns ="http://xmlns.oracle.com/bc4j"
Name = "L1ApproverVO".
Version = "11.1.2.62.76".
BindingStyle = "OracleName".
CustomQuery = 'true '.
RowClass = "proposal.model.L1ApproverVORowImpl"
ComponentClass = "proposal.model.L1ApproverVOImpl"
PageIterMode = "Full".
UseGlueCode = "false" >
< DesignTime >
< name Attr = "_codeGenFlag2" Value = "access |" Coll | VarAccess "/ >"
< name Attr = "_isExpertMode" Value = "true" / >
< name Attr = "_isCodegen" Value = "true" / >
< / DesignTime >
Properties of <>
< SchemaBasedProperties >
< LABEL
ResId="proposal.model.L1ApproverVO_LABEL"/ >
< / SchemaBasedProperties >
< / properties >
< variable
Name = "p_state".
Type = "where".
Type = "Java.lang.String" > "
Properties of <>
< SchemaBasedProperties >
< DISPLAYHINT
Value = 'Hide' / >
< / SchemaBasedProperties >
< / properties >
< / variable >
< SQLQuery > <! [CDATA [SELECT pv.adfuser username, pv.tag emp_number, pv.full_name emp_name,
E-mail PV.email_address
SUBSTR (fv.lookup_code, 1, INSTR (fv.lookup_code, '-')-1) State
From apps. XXGP_PROPOSAL_APPR_HIERARCHY_V fv, pv apps.xxgp_proposal_employees_v
WHERE fv.lookup_type = 'XXGP_PROPOSAL_APPR_HIERARCHY. '
AND SUBSTR (fv.lookup_code, INSTR (fv.lookup_code, '-') + 1) = pv.tag
AND SUBSTR (fv.lookup_code, 1, INSTR (fv.lookup_code, '-')-1) =: p_state
Union
SELECT the user name pv.adfuser, pv.tag emp_number, pv.full_name emp_name,
E-mail PV.email_address
SUBSTR (fv.lookup_code, 1, INSTR (fv.lookup_code, '-')-1) State
From apps. XXGP_PROPOSAL_APPR_HIERARCHY_V fv, pv apps.xxgp_proposal_employees_v
WHERE fv.lookup_type = 'XXGP_PROPOSAL_APPR_HIERARCHY. '
AND SUBSTR (fv.rmm_code, INSTR (fv.rmm_code, '-') + 1) = pv.tag
AND SUBSTR (fv.rmm_code, 1, INSTR (fv.rmm_code, '-')-1) =: p_state
[[Group of pv.adfuser, pv.tag, pv.full_name, pv.email_address, SUBSTR (lookup_code, 1, INSTR (lookup_code, '-')-1)]] > < / SQLQuery >
< ViewAttribute
Name = "username".
IsUpdateable = "false".
IsPersistent = "false".
PrecisionRule = 'true '.
Precision = "255".
Type = "Java.lang.String"
ColumnType = "VARCHAR2".
AliasName = 'USER name '.
Expression = "USER name".
SQLType = 'VARCHAR' >
< DesignTime >
< name Attr = "_DisplaySize" Value = "90" / >
< / DesignTime >
< / ViewAttribute >
< ViewAttribute
Name = "EmpNumber.
IsUpdateable = "false".
IsPersistent = "false".
PrecisionRule = 'true '.
Precision = '150 '.
Type = "Java.lang.String"
ColumnType = "VARCHAR2".
AliasName = 'EMP_NUMBER. '
Expression = "EMP_NUMBER."
SQLType = 'VARCHAR' >
< DesignTime >
< name Attr = "_DisplaySize" Value = "150" / >
< / DesignTime >
< / ViewAttribute >
< ViewAttribute
Name = "EmpName".
IsUpdateable = "false".
IsPersistent = "false".
PrecisionRule = 'true '.
Precision = "240".
Type = "Java.lang.String"
ColumnType = "VARCHAR2".
AliasName = 'EMP_NAME.
Expression = "EMP_NAME.
SQLType = 'VARCHAR' >
< DesignTime >
< name Attr = "_DisplaySize" Value = "240" / >
< / DesignTime >
< / ViewAttribute >
< ViewAttribute
Name = "Email".
IsUpdateable = "false".
IsPersistent = "false".
PrecisionRule = 'true '.
Precision = "240".
Type = "Java.lang.String"
ColumnType = "VARCHAR2".
AliasName = 'EMAIL '.
Expression = "EMAIL".
SQLType = 'VARCHAR' >
< DesignTime >
< name Attr = "_DisplaySize" Value = "240" / >
< / DesignTime >
< / ViewAttribute >
< ViewAttribute
Name = "State".
IsUpdateable = "false".
IsPersistent = "false".
PrecisionRule = 'true '.
Precision = "30".
Type = "Java.lang.String"
ColumnType = "VARCHAR2".
AliasName = 'STATE '.
Expression = 'STATE '.
SQLType = 'VARCHAR' >
< DesignTime >
< name Attr = "_DisplaySize" Value = "30" / >
< / DesignTime >
< / ViewAttribute >
< ViewCriteria
Name = "L1ApproverVOCriteria".
ViewObjectName = "proposal.model.L1ApproverVO"
Concert = 'AND' >
Properties of <>
< CustomProperties >
< property
Name = "displayOperators".
Value = "InAdvancedMode" / >
< property
Name = "AutoPlay".
Value = "true" / >
< property
Name = "allowConjunctionOverride".
Value = "true" / >
< property
Name = "showInList".
Value = "true" / >
< property
Name = 'mode '.
Value = "Basic" / >
< / CustomProperties >
< / properties >
< ViewCriteriaRow
Name = "L1ApproverVOCriteria_row_0".
UpperColumns = "1" >
< ViewCriteriaItem
Name = "username".
ViewAttribute = "user name".
Operator = 'STARTSWITH '.
Concert = 'AND '.
Required 'Optional' = >
Properties of <>
< SchemaBasedProperties >
< DISPLAYWIDTH
Value = "15" / >
< / SchemaBasedProperties >
< / properties >
< / ViewCriteriaItem >
< ViewCriteriaItem
Name = "EmpNumber.
ViewAttribute = "EmpNumber.
Operator = 'STARTSWITH '.
Concert = 'AND '.
Required 'Optional' = >
Properties of <>
< SchemaBasedProperties >
< DISPLAYWIDTH
Value = "15" / >
< / SchemaBasedProperties >
< / properties >
< / ViewCriteriaItem >
< ViewCriteriaItem
Name = "L1ApproverVOCriteria_L1ApproverVOCriteria_row_0_EmpName".
ViewAttribute = "EmpName".
Operator = 'STARTSWITH '.
Concert = 'AND '.
Required 'Optional' = >
Properties of <>
< SchemaBasedProperties >
< DISPLAYWIDTH
Value = "30" / >
< / SchemaBasedProperties >
< / properties >
< / ViewCriteriaItem >
< / ViewCriteriaRow >
< / ViewCriteria >
< ViewCriteria
Name = "L1ApproverVOCriteria1".
ViewObjectName = "proposal.model.L1ApproverVO"
Concert = 'AND' >
Properties of <>
< CustomProperties >
< property
Name = "displayOperators".
Value = "InAdvancedMode" / >
< property
Name = "AutoPlay".
Value = "false" / >
< property
Name = "allowConjunctionOverride".
Value = "true" / >
< property
Name = "showInList".
Value = "true" / >
< property
Name = 'mode '.
Value = "Basic" / >
< / CustomProperties >
< / properties >
< ViewCriteriaRow
Name = "L1ApproverVOCriteria1_row_0".
UpperColumns = "1" >
< ViewCriteriaItem
Name = "State".
ViewAttribute = 'State '.
= '=' Operator
Concert = 'AND '.
"Value =": p_state ".
IsBindVarValue = 'true '.
Required = "Optional" / >
< / ViewCriteriaRow >
< / ViewCriteria >
< ResourceBundle >
< PropertiesBundle
PropertiesFile="proposal.model.ModelBundle"/ >
< / ResourceBundle >
< / ViewObject >

Dear gurus,

Thank you for your support and answers.

Problem solved, I added view accessors name in the attribute skip list. now it does not work as expected.

Oracle BI Publisher data report OEM12c is not getting updated...
Hello

We have integrated BI Publisher with EM12c. I developed a report that verifies database extended information (initial maxextents, next) at the tablespace level. The dataset is chosen as a repository of EM. The report runs absolutely perfect until that new data are added to a database. For example, I created a new table space. The new tablespace associated info is not get updated despite the fact that I updated the data source and checked that the tablespace exists in the database.

Can someone pls help.

Thank you
Diakité
You can get real-time, but here are two examples (host and Oracle Home) to perform a refresh manually in bulk or on a per-target basis:
http://docs.Oracle.com/CD/E24628_01/EM.121/e27046/troubleshooting.htm#EMLCM12164

Can not get updates Windows 7, error code 646

Windows updates fail almost always error code 646 today.

Other error codes are application error 100, event id 1000 and mshtnl.dll (registry errors?)

8 Windows Explorer has stopped working properly, running on windows 7

There has been a change in the health of windows, event 42

Here are some of my problems

* original title - can not get updates, Windows 7 instead of 8 as its supposed to, registry errors *.

Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

http://support.Microsoft.com/kb/2258121 releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

Can not get updates more (error Code 80080005)

original title: can not get updates any longer

Have not been able to get updates since January. Get the error code 80080005, but there is no solution for it.

Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).

Please check that you are logged into an account with administrative privileges.

Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate. What follows applies only to Windows Vista.
1. Download AccessChk (Sysinternals). This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services. Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx
2. Save the file on your desktop zip and extract the file:
  -Right-click on the file and select extract all...
  -Click Next when prompted for the Destination.
  
  Therefore, you should see a folder called AccessChk on your desktop.
3. Open the folder AccessChk
4. Hold the SHIFT key and right-click in the window. Select "open here command prompt.
5. A command prompt window should open a similar message:
  C:\Users\\Desktop\accesschk >
6. Type the following command and press ENTER:
  "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
  Tip: You should be able to copy and paste the command into the command prompt.
7. Close the command prompt window. Open the Accesschk folder on your desktop (if it has been closed).
8. Double-click Accesschk.txt (text file), it should open Notepad.
9. Copy and paste your results with a new question in the forum of Windows Update. (Make sure that you write 0x80070005 in the subject).
Reference1

If this is not enough: -.
1. If please download the subinacl.msi from the following link and save the patch to installation on the desktop:
  
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  SubInACL (SubInACL.exe)
  SubInACL is a command line tool that allows administrators to get the security information on files, registry keys, and services, and the transfer of information from one user to another, from local or global group to and from a domain to a domain.
2. Please, go to the desktop and double-click on the downloaded file.
3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
4. Click the "Start" button in the "Search" bar, type: "Notepad" (without the quotes) and press ENTER.
5. Copy the following commands, and then paste them into the opened Notepad window:
  
  off @echo
  
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
  
  @Echo =========================
  Completed @Echo.
  @Echo =========================
@pause
After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.
View the desktop and right click the reset.bat file, then choose "Run as Administrator".
You will see a window of type BACK treatment.

Reference2

This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

I uninstalled windows 10 and installed windows 7 again but it's not getting updates

I uninstalled windows 10 and installed windows 7 again but it's not getting updates

You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

How to reset the Windows Update components

http://support.Microsoft.com/kb/971058

Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

http://support.Microsoft.com/kb/929135

Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

I suggest before you stop and install the updates, disconnect from the Internet, first.

my creative cloud is not getting updated. the update does not start yet. There has been 0% for the last 24 hours now

my creative cloud is not getting updated. the update does not start yet. It was 0% for the last 24 hours

Hello

Please follow the steps below and check it, if it helps:

1 - click wheel settings in the upper right of the cloud creative app > Preferences > sign out

2 force quit Adobe all activity monitor processes / end of task for Adobe on the process from the Task Manager (e.g. cc, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

3-

MAC: Right-click on the icon in the Finder and select the 'Go - To' folder option. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol") ~/Library (It will open the folder of the user's library.)

Then go to the Application Support > Adobe > OOBE folder and folder AAM Updater so trash

WINDOWS: C:\Users\\AppData\Local\Adobe\ MAA UPDATER and OOBE times

4-

MAC: Go to the Apple icon > System Preferences > privacy and security > firewall > TURN OFF (to do this, you will need to click on the padlock in the lower left of this machine and then enter your mac password)

Go to the Apple icon > System Preferences > Security and privacy > General > allow applications downloaded on should be in ANY

WINDOWS: see, turn the firewall on or off - Windows Windows help

5 make sure there is no other Internet active safety program - if it is then go ahead and launch CC app and login and check

Let us know if that helps.

Kind regards

Bani

just reinstall photoshop cs5 and can not get updates installed?

just re-installed photoshop cs5 and can not get updates to load and install.
the program works.

CS5 update does not work?

iterator does not get updates

Hi all...
I use Jdev 11.1.1.6
When I enter the page (popup in my case) iterator is populated by a selection drop-down list (before entering the page)
for the first time that iterator is filled correctly
< trh:tableLayout id = 'tl1' width = '100% ' borderWidth = "1" cellPadding = "5" >
< af:iterator value = "#{pageFlowScope.Bean.list}" var = 'temp' "
ID = "dc_i2" >
< trh:rowLayout >
< trh:cellFormat >
< af:outputText value = "#{temp.var1} 'escape = 'false'"
ID = "dc_ot10" / >
< / trh:cellFormat >
< / trh:rowLayout >
< / af:iterator >
< / trh:tableLayout >
Run the backingBean to see the list
{} public void populateInterator (ActionEvent event)
.......
setList (XXX.getList ());
System.out.println ("list =" + list);
}
When I change the value af:inputText below, I run a search in backing bean
< af:panelGroupLayout >
<af:inputText binding = "#{pageFlowScope.Bean.Text}" clientComponent = "true" autoSubmit = "true" valueChangeListener="#{pageFlowScope.Bean.updateIterator}"/ > "
< / af:panelGroupLayout >
Work at the backingBean
{} public void updateIterator (ValueChangeEvent valueChangeEvent)
.......
setList (XXX.getList ());
System.out.println ("list =" + list);
}
When I print the values on console (jdev), I and desired list, but this list is not getting updated on the front end.
< trh:tableLayout id = 'tl1' width = '100% ' borderWidth = "1" cellPadding = "5" >
< af:iterator value = "#{pageFlowScope.Bean.list}" var = 'temp' "
ID = "dc_i2" >
< trh:rowLayout >
< trh:cellFormat >
< af:outputText value = "#{temp.var1} 'escape = 'false'"
ID = "dc_ot10" / >
< / trh:cellFormat >
< / trh:rowLayout >
< / af:iterator >
< / trh:tableLayout >
Clues or advice where fishing can be?

After you set the list, give a PPR on the list.

AdfFacesContext.getCurrentInstance () .addPartialTarget (yourListComponent ());

Index of book does not get updates

Hi all
I have a book of FM 10 close to 200 pages and 7 chapters. It has a nice (markers).
Today, I discovered that the index is not get updated when I update the book. New entries do not come.
"Generate Table of contents, lists, and indexes" is selected by updating. And it was working fine before, this problem came a lot recently. I noticed today.
When I try to generate a new index, the generated file is empty. Although the index entries in the book are very good, FM does not detect them.
I'd appreciate quick help much in this case.
Kind regards
Com

> I imported these (all formats including the masterpages and ref pages)

> of the old index file, and now it's all the same to the research.

It is Plan B and is a more reliable route, but is more work that's Plan.

> ... I'm not being able to ressuract the old index as you said...

That's happened?

Form AD and AD does not get updates
Hello

I have updated to a user of the IOM in Admin Console for a particular domain. The field is getting updated in the definition of user IOM.
However, this field is not getting updated.

I'm trying to understand how an update to your user IOM - updates to the AD form.
I think that there are two tasks in the definition of user AD process.
one is "Update field", and the other is 'field of change '.

Where this field named made frm? How does the form AD knows that there is an update.

In OID, we have a Lookup.USR_PROCESS_TRIGGERS search. Is there something similar for AD?

All ideas are welcome. I will award points. THX.

Concerning
Vijay Colin
I'm trying to understand how an update to your user IOM - updates to the AD form.
I think that there are two tasks in the definition of user AD process.
one is "Update field", and the other is 'field of change '.

Where this field named made frm? How does the form AD knows that there is an update.

In OID, we have a Lookup.USR_PROCESS_TRIGGERS search. Is there something similar for AD?

You must add the task of Change FieldName tends in AD Process Definition to Lookup.USR_PROCESS_TRIGGERS. Now if the update coming IOM triggers this task that copies the updated value of the UserForm to the AD form. Once the value is copied to a field in the form of process AD field updated task name is called which will update the same target.

Lookup.USR_PROCESS_TRIGGERS triggers all specified tasks when update happens on a particular area on the user profile and it is common for all targets.

my project writes the data from the accelerometer on USB but variable shared do not communicate with modbus

Hello

I have a program that reads input 3 off 9234 modules on a cRIO, the idea of the program is to read that data and save it in a bin on a disc file hard usb connected, the program uses also the shared variables to connect signals max since the 9234 then send thm to a modbus slave, my problem is that I'm now the exact data on the USB key that I do not get anything It's the modbus link down, I attach the program for you to see, all shared variables are on the loop speed low rt, any help would be grateful.

Thank you very much

Jason

Hi Tori,

Thanks for the reply I found the flaw that it's on the FPGA 9234 principal, max run-up was forced instead to adapt to the source, now that I've adapted to the source, it works, thank you for taking the time to look at and answer.

Kind regards

Jason

Can not get updates after SP2 installed on Win Vista Home

I just installed SP2 on two computers. A Compaq laptop and the other a HP desktop computer. I can't receive any update on computers.

Windows Update insists that the computer is up to date.

In comparison, my own computer with Windows Vista SP2 has many applied updates.

How can I fix this?

Charles_W_Davis,
If it's been a few days since you have installed SP2 and don't always get updates then you may need to reset Windows Update components. Run the hotfix article tool, and then run Windows Update. First, run the tool in normal mode, then test, if it is not corrected, then run it in aggressive mode. Post back with the results. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.

Can not get updates after the download and the installation and reboot

I have a Dell Dimension E521, Window Vista Home Premium desktop computer. Iwill download and install updates, but whenever I restart my computer I have installed. But to install anything, I need to reset the time and date, and the time zone. No updates of any kind can be installed. I can't move IE7 to IE8 or any site at all. My windows freezes constantly and I often crashes. Drivers will not install either. Help, please!

After that you turn on your computer and reset the time to be correct, it does keep time until what you restart it?

If she keep the correct time until the reboot, the problem lies with a coin size $5 trickle battery in your motherboard.

Replace it.

You must have the correct time to get updates and install it properly...

Mick Murphy

Variable shared do not get updated in host VI

Similar Questions

Maybe you are looking for