Variant of data object class

Similar Questions

• HTTPService data object / class variable number

  Hello
  
  I am building a Flex application with ActionScript classes where the class contains all events management. In a class like:
  
  {stuff package
  public var xml:XML() = new XML();
  public void MyObject() {}
  public void getData (): void {}
  Here I create an HTTPService object, fill in all the information and send it.
  }
  public void resultHandler(event:ResultEvent):void {}
  XML = XML (event.result);
  I get the XML very well here, but after the end of this call, I can't get this data more
  }
  error handler, etc.
  }
  
  
  The problem is that if I want to view/use these data in the result handler, that is fine, but if I try to store these data in a class variable, I can't recover this data from outside the class. If I refer to this object to another object, the data, all right and I can see the xml from the results Manager, but I can't seem to store these data, then pull it out via a class variable, or via a getter method that returns the variable. Is there something I'm missing here? Basically, I want to get the information via the HTTPService and store this information in a class variable that I can access it later. How can I do this?
  
  Thank you.

  Thanks for all your suggestions. The final problem was indeed the asynchronous nature of data calls HTTPService. I found a series of articles that has highlighted and provided solutions to the issue. An important quote from one of the articles is: "the fact that the web service calls flex are asynchronous have implications on how you design your code." and even, "the asynchronicity of remote calls has a major impact on how you design the customer."

  This is exactly the kind of information was missing and I have not found well-described in the Adobe Flex 3 documentation or tutorials I've read.

  Here are some links to more useful articles I found:
  http://tinyurl.com/34py5p
  http://techpolesen.blogspot.com/2007/09/coping-with-Flex-asynchronous-remote.html
  http://techpolesen.blogspot.com/2007/09/coping-with-Flex-asynchronous-remote_26.html
  http://techpolesen.blogspot.com/2007/11/coping-with-Flex-asynchronous-remote.html

• Process of reading/definition of component Java Spring or XSLT data objects

  I have a BPMN process that refers to a service component of spring.
  The spring has a Java class and within this category, I would like to be able to reference the data of the BPMN process objects.
  Ideally, I would like to simply read and write to these objects within the Java class.
  However, if this is not possible, I have not I can define the input parameter for the Java class and have it return an object.
  If I go this way, how spend or return an object of one type other than your standard types (string, int, boolean)?
  
  For example, I have a data object is a type that I created, based on a schema.
  How do I refer to one in a Java class?
  
  Hope that makes sense.
  Thank you
  Mike

  Mike,
  Steps 1 to 3 are correct. You should not change the WSDL file however. You have 2 options:

  1. create the POJO with your code of spring which have the same or similar structure to the schema you want to use. Add them as arguments and the return type of your operation. Then you can re-create the exposed service and it will regenerate your WSDL with the new definitions of type of these objects.
  2. you could generate your existing schemas JAXB java objects and use them as the argumengs and types back. We had problems in the past with this so it may not work for you, depending on your version.

  Thank you
  Adam DesJardin

• How to change data objects and update the corresponding task and task forms?

  Hi all
  
  I modified this thread because I found that I had many questions to ask.
  
  1.
  I'm quite new to OBPM and would like to know how to change data - for clarity objects add a new attribute "Dependents of the Client" "Customer care" - and therefore update the task that uses the 'customer information' what makes via data binding - I get an error message here - or via the data about the data Task-The chosen tab it does not appear to be linked to my approach in some sort.
  
  2.
  Will be the task form that I generated earlier in < 1 > update automatically? Is it possible to update manually if the task has been clearly customized?
  
  3.
  What are the objects of project data? They do not store values in my process. They are for the arguments only - like reusable process?
  
  Thanks in advance,
  
  Kind regards
  
  Yanis

  Hi Yanius,

  (1) assume that you start from scratch. First, you declare your data object structure. To do this, you must go to the BPM project Naviagtor, right-click on 'Catalogue of trades' and create a new Module. Then you can right click on the module you created and select the new object of trade. Add all the attributes you need. It is the same to declare a class in Java. Second, you must declare a variable of the type process you have created: select the process, go to the Structure display (if you don't go and activate it in menu view Jdev-> Structure). Right click on the Process data object and create your variable. It's like setting a variable in Java. In short, answering your question, make the path opposite: find in your process of type "Customer Details", then go to your catalog Business, right click and change the definition to add what you need.

  (2) the human task will not update automatically (annoying). If you change the object itself, so you don't need to change your mappings because actually there the same object you are through the task as in / out argument. There are two things here: the human task and form associated with it (where probably change you the subject i.e. customer details). Go to the form (.jspx) - click on the tab links (by default, you are in the Design). In the links page, there is a link on top: "Page Définition File" (something like proj/pageDef/...xml). Open the XML file and go to the source. There you can add manually now all the attributes you need and that were not available before (i.e. dependent Client). It's a little complicated, but at least you don't have to recreate it. particularly useful if you have already implemented and subsequently form, you need to add more things (business is very good to say otherwise, "I would like to see something else in the form" ;)

  (3) project data objects are visible by all processes that you have in the project rather than the object of process data that are visible only to the method where you set the variable to. This means that you declare an object of data of the project once and then it will be available to all processes. Keep in mind that each process has a copy of it. In other words, it is not like a global variable that everyone sees. If edit you in a single process, other processes will not see the new value.

  I hope that I have answered your questions.
  See you soon,.
  Felipe

• Attention impossible to bind to property 'somevar' on the 'Object' class object is not an IEventDispatcher?'

  Hi all

  How to fix under WARNING:

  Attention impossible to bind to property 'somevar' on the 'Object' class object is not an IEventDispatcher

  Thank you

  Sunil Rana

  Hi Paul,.

  I found the solution on the net & here's news

  Cast the data in your itemrenderer as an objectProxy.

  itemRender.mxml

  http://www.Adobe.com/2006/mxml '.

  verticalScrollPolicy = "off".

  horizontalScrollPolicy = "off".

  creationComplete = "init (); » >

  Import mx.utils.ObjectProxy;

  [Bindable]
  public var dataProxy:ObjectProxy;

  private function init (): void {}
  dataProxy = new ObjectProxy (data);
  }
  ]]>
      

  Thank you

  Sunil Rana

• Date to the Date object string

  Hello
  
  How I'd go on parsing the date in DD/MM/YYYY format strings in a date objects. I'm sure its an easy problem but I can't find a simple way to do as most of the API wants a different format as DD/MM/YYYY
  
  Thanks for any help

  Hello

  in the actionscript 3.0 Cookbook, there is a class DateFormat described, which allows to parse strings of objects date.

  You can download the code for the dateformat.as from there.

  http://www.rightactionscript.com/ASCB/

  Best regards
  Kcell

• Determine whether the instance of the object is of a specific object class.

  I was not able to find the answer in the documentation or in the forum. My terminology is perhaps a bit off (Java and c# background back to PL/SQL programming).
  
  The general question is: given an object instance how to determine if the type of the instance is of the same kind as a specific object class.
  
  In particular, I do a unit test and examine the returned object instance. The effective yield is described as follows
  
  -This data structure contains a pointer to an LDAP session
  SESSION OF SUBTYPE IS RAW (32);
  
  I expect an instance of DBMS_LDAP. SESSION. To confirm this, I propose that the returned pointer DEREF and see if it's a type of DBMS_LDAP. SESSION. When this is confirmed, then I can further the return of reference.
  
  Draft code is
  
  BEGIN
  IF DEREF ({RETURN$}) some_operator_which_compares_object_types DBMS_LDAP. SESSION
  THEN
  RETURN TRUE;
  ON THE OTHER
  RETURN FALSE;
  END IF;
  END;
  
  where some_operator_which_compares_object_types is what I need to know.
  
  Thank you for your help. And of course, the other way to do business and/or links to the correct location in the documentation are appreciated.
  
  Kind regards
  Bill

  I think you are looking for [IS OF | http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/conditions014.htm] condition.

  SQL> create or replace type mytype as object(a number);
    2  /
  
  Tipo creato.
  
  SQL> declare
    2  x mytype := mytype(1);
    3  begin
    4  if x is of (mytype)  then
    5  dbms_output.put_line('OK');
    6  end if;
    7  end;
    8  /
  OK
  
  Procedura PL/SQL completata correttamente.
  

  Max
  [My Italian blog Oracle | http://oracleitalia.wordpress.com/2009/12/29/estrarre-i-dati-in-formato-xml-da-sql/]

• Binds the data object graph, causing memory

  Hello

  I want to create a WPF application that uses Measurement Studio to display the data points on the graph.

  We have already implemented a HAL, the data in the reports of the UI (after a few manipulations), using the DAQmx.

  I saw in your examples you display only the last second points, but my users can choose to see the data in an hour, and if I continue in the data memory of the points for the last hour I get out of memory (the data object become very big).

  How can I display in the chart of the data of the last X minutes / hours without keeping all the data in memory?

  Sorry, it was my fault (the years were defective in my local test as well, just, I had not noticed). Fortunately, what makes the solution even simpler: the CustomXAxis implementation can change just object ISourceDataProvider.TryGetSourceDataStart() { return default(DateTime); } .

  Also, for future reference: to the changes of the properties in WPF, you must be a dependency property or INotifyPropertyChanged , but not both (i.e. didn't need you OnStartTimePropertyChanged in CustomXAxis ).

• Variant of data with Null void management / vi

  Hi all

  I create an application that uses a DataSocket to generate Variant data.  I then transform variant in its form 'real data' (Boolean, U8, DBL) by using the 'Variant' to Data.vi, it works very well when there are data from the DataSocket however if no data is present, an error is received (error code 91).  I added a check to see if there is no current using the code below, data however as there are more than a dozen cases of this code throughout my program of conversion of the variants for a mixture of; Boolean values, U8 and DBL, I want to put this code in a Sub VI, I believe this would be more careful and do real programmers.

  My problem is that the "output data" must be able to adapt to the "Type" of entry before execution (as does "Variant of Data.vi"), but I could not find a way to do it.  Does anyone have any suggestions on what I need to do to get there?

  Thanks in advance,

  Mark

  With the help of LabVIEW 2010 Full Development System

  Wrap the function in a case structure and use empty String/path? with the cable Variant function to determine if the variant is empty.  Run the variant to the data if it is not empty.

  Edit: Looks like you added a picture I posted and do what I was proposing.  Anyway, I don't know that you can really conclude it in a Subvi with different types.  If you have a limited number of different types, you could maybe do a polymorphic VI.

• Binds a shared variable to a NOR-PSP data object does not work

  Hello

  I want to share data between a RT-target and one or several hosts (LV 8.6.1). Shared network variables are deployed to the target RT.  According to NOR to access shared another project or host variables must be done by defining a variable shared on the host computer and the aliasing they NEITHER-PSP data object on the target.

  

  I did and the shared host variable was an error (0x8BBB0011) during execution.

  

  Next I have an alias to a shared variable, deployed on the host to another project. It worked.

  Another thing I tried was to bind the variable of the RT-target to a display element:

  

  This works! And as you can see that the path of the NOR-PSP data object is exactly the same thing! So, what is the difference between linking a data object to a shared variable and a display element?

  Is there a bug in the EVS, or am I missing something here?

  Home project:

  

  The VI editor

  

  Hope someone has an answer.

  Concerning

  Matthias Quade

  Dear Mr. Quade,

  Thanks for posting on the Forum of National Instruments. There is a known issue with the path of the linked with LabVIEW 8.6.1 variable

  Please download the patch for LabVIEW 8.6.1, it should solve your problem:

  http://Joule.NI.com/nidu/CDs/view/p/ID/1255/lang/de

  Best regards from Munich

• put the value of the calendar in the Date object

  Hello

  I'm completely stuck and moving in circles.

  I have a specific date at which I entered in a calendar object using the following:

  caltestTime.set(Calendar.YEAR,2011);
          caltestTime.set(Calendar.MONTH,5);
          caltestTime.set(Calendar.DAY_OF_MONTH,7);
          caltestTime.set(Calendar.HOUR,11);
          caltestTime.set(Calendar.MINUTE,27);
          caltestTime.set(Calendar.SECOND,00);
  

  Now I'd put this in a Date object, so I can do some running on it and then convert back to a calendar object. Is there a simple way to do this? Or is it just not possible? I would liketo finish with a Date object that represents the time as in the calendar object. Help, please.

  Cyriel

  Calendar.setTime (Date of) sets the calendar date.

  Date d = Calendar.getTime () becomes the object of Date in the calendar.

• What is custom data objects?

  Hello

  What is the custom data object? Use of custom data object?

  Thank you

  POOJA

  Hi Pooja,

  The custom data objects are used to store data that can be linked to a Contact or company record and they are not part of your account or customer contact record. Custom data object records can also go by the name data cards.

  Use: -.

  Send emails to contacts who have tweeted about a certain subject.

  Contacts of segment and filter for inclusion in an email campaign.

  Kind regards

  Eloqua Experts

• Cvent Feeder should send information to a Contact record or a custom data object?

  We use Cvent to organize our event series each year. The event series contains ~ 18 events each year. This will be the first year we try Cvent trough to connect the information that we collect to Cvent and push it in Eloqua? Should push us to a record of individual contact or a custom data object?

  My first inclination is to match to a contact record. My reasoning for this is that the event creates many new perspectives and we want these people to become contacts in Eloqua, so that they can be put in feed and then also synchronized in Salesforce. Our Organization has also had a very limited use of custom data objects so far, we're still learning the system, and it's so advanced capabilities of segmentation may still be beyond our capacity at the moment. My fear is that if we were to store data of Cvent in custom data objects, data objects that can be linked to a contact record because they are quite new perspectives there. On the other hand, a lot of information from the event record (beyond names, emails and addresses) is really intended for a custom data object. Any advice as to how we should do that?

  My recommendation is to use a custom data object. -Especially if you store specific information about the event.

  While I'm not 100% on the configuration of Cvent, you probably have the ability to set the default mapping that relates to the LCO to the contact table. -It is usually an email address

  Otherwise, you also have the option of specifying the parameter 'Mapping the default used in Upload' for the CDO. -Make sure it is set up properly as well. -Yet once, it is usually to address Email

  As long as they are set up correctly, the system will automatically create a new contact for you if the 'E-mail address' the participant Cvent is NOT already a contact Eloqua... More importantly, if the 'Email address' the participant Cvent is already a contact-> a new contact will NOT be created. (Instead, the existing contact will be related to multiple records LCO)... That's what you want

  This way don't unnecessarily create you more contacts than you need to.

  Once you get this sorted out, you'll be amazed how it is easy to start to use these CDO into Segments.

  Let me know if it helps.

  ***********

  Chris Continenza

  Senior Marketing Automation Consultant at Tegrita Consulting Group

  Tegrita Consulting Group

  Web: tegrita.com

  Phone: 1.800.771.3308

  E-mail address: [email protected]

• Can I evaluate and fill out a form with data from a custom data object?

  I'm not a developer, but I'm trying to find as much information for my web team so they can implement this for me.  We use the E10.

  I have some information for the contacts stored in a data object custom I want to use for pre-population information access door and in another form.  For example:

  1. User enters his email address into a form and hands
  2. A search and contact and custom data object (CDO)
     1. If the contact has a CDO with the required information, he fills the following form with the information
     2. If the contact does not have the required ORDER, it displays information and a link to the place where to go next

  Is it possible, and where should I direct my developers learn more about treatments?

  Richard

  Hi Richard,

  You can certainly do so using data for the Eloqua Web search (Setup > data Web Look Ups). A database search allows you to request data stored in Eloqua, bring up the page and with a few JS, we determine if they will go on track 1 or 2 you described above.

  

  Is that an advanced feature requires knowledge of HTML and JS. Here is a good article on data search that should help:

  Using the Eloqua Cookie to customize your Web site

  If you have any specific questions, our support team is very familiar with this feature and can help to solve problems or answer specific questions.

  -Andrew.

• Boxes and custom data objects

  I am creating a form with a list of checkboxes based on interests of customers - there are 8 in total and they can select several options.

  What I want to do is to create shared lists for each option which will serve as a member of segment for future mailings.

  I also need to store data for that person together so if I never, I can go and say ' well, Joe Bloggs here is interested in X, Y and Z, so I'll put him in the countryside, A and B'.

  Are the data objects custom the way forward? I had a go at creating and mapping it, but I don't know what to do with these boxes!

  Thank you!!

  For the shared list, simply use the step "Add to shared Contact list" of your form and make it to the condition that the box is checked. You will need 8 of these steps, one for each option.

  To preserve the data, I would like to use a custom data object. Create a new CDO set with an address field of the email and one for each of your boxes (and any other information you want, of course.) And then use the processing stage of 'Update Custom Data object - With Custom Values'. You can define this step to add a 'yes' or 'on' or whatever you want to the appropriate field in the ORDER. Yet once, make this step on the box being checked in your form. Yet once, you need to create 8 of these steps, but once you get the first fact, others should go faster.

  PS, I kept typing "from" instead of "form". Argh.