Vcenter added?

Similar Questions

• ESXi 5.1 to vCenter added buy FULL rather than IP domain name

  We have ESXi 5.1 and I added it to vCenter 5.1 by IP (everything works fine) but I wanted to add it by name. I have DNS resolve his name and IP (reverse) correctly.

  (1) I didn't know if I could add it again, by its name since it is already there by IP.

  (2) if I can, what is my dosage? What I need to change the Hosts file? Don't think that Yes, because I have working DNS.

  Concerning

  That's why. If you are not able to ping on your host, you cannot add using the host name.

  You can edit your hosts file and add your ESX.

  so go in C:\Windows\system32\drivers\etc Then edit the hosts file

  And add your host 192.168.0.75 lgs - esxi.local lgs-esxi

  And try to add your host.

  Kind regards

  Julien

• How to stop a particular vCenter alerts

  Hello

  I know that I have asked a few questions simple and stupid these days, but believe me, I got this tool foglight for installation in our environment that I have no idea, but no other no appointment... must be done. so tried my ways.

  Scenario 1:

  I have 3 guarded vCenters currently in my FVE 8, we will do a normal maintenance on a vCenter, how can I stop all alerts for this specific vCenter. What I have to edit each rule or is it possible to stop the agent that collects the data... something like that.

  Scenario 2: I want to add a new environment of vCenter for my tool existing Foglight, how this can be achieved.

  Your prompt response will be highly appreciated.

  Thank you

  Kind regards

  Learn 2 eager

  Scenario 1 - you can create a power failure for alarms http://edocs.quest.com/foglight/5611/doc/wwhelp/wwhimpl/common/html/frameset.htm?context=forge&file=AdministrationConfiguration/SettingUp_Ref.41.php&single=true

  Scenario 2 - you need to check if you are sized to the guarded vcenter added primarily for your follow-up global is not affected by the added objects/metric/alerts. Regarding the addition of a vcenter, you do this in the virtual environment dashboard > Administration tab.
  Follow these instructions http://edocs.quest.com/foglight/571/doc/wwhelp/wwhimpl/common/html/frameset.htm?context=cartridgeInf&file=vFogStorage-install/1_GettingStarted.28.php&single=true

  Hope this helps

  Golan

• Recently added that in environment VMware ESXi hosts do not appear

  I'm running worm vFoglight 6.7. recently, I added 2 new 5.1 ESXi host and 2 data stores into my vsphere cluster. These new fabrics do not appear in vfoglight under dash VMware environment. I tried to update the server vCenter added by re activating the latter. Without success. Could someone help me how to get it to update.

  Give a washer, they can probably find what is happening and turn it on.  It is very rare that I've ever seen an upgrade fails or not be able to recover the worst of him.

• vCOPS 5.7 change label to vCenter

  Hi all

  is there a way to Rename label of the vCenter added by the Admin interface? Or you have to Cancel registration et re-save it? I 5.7.1 version.
  
  Thank you very much.
  
  Matrix

  Hi Matrix,

  You can make the custom UI (https::///vcops-custom). Then, go to the overview of the environment, select the instance of the adapter and click on modify. Here, you can change the name of the resource whose efficiency has done what you want.

  If needed I can provide you with screenshots.

  Thank you

  Alex D.

• vCenter Agent

  I use vCenter 5.1 and we'll be adding 5.1 vSphere hosts in a farm in the data center. When 5.1 ESXi hosts are added vCenter server installs an agent on ESXi hosts? My understanding is the hosts have no console for agents, but I would like to understand the interaction between ESXi and vCenter and determine if an agent installation takes place - thank you

  In ESXi 5.1, vpxa is by default installed module in ESXi. Once the vCenter added, he starts talking to vpxd

• constant vCO - specifically vCenter

  Hello

  I would like to know which constants are available in vCO, including how the vcenter which currently serves back...

  MfG,

  Dave

  I think that the id property returns a url with the domain name or ip address of the machine of vcenter. Which of the two will be returned depends on what you entered in the configuration of the plug-in when vCenter added. Do you need another 'name' of the vCenter?

• Physical Vcenter accident.

  I have two ESX Server physical vCenter 4.0 + 1. The crash of vCenter (hardware problem),

  now, I have prepared an another physical vCenter, I need to connect two ESX 4.0 for the new vCenter server or is it ' to do something else?

  Thank you very much.

  Hello

  Yes you can connect again VCenter (his watch some attention, ignore this)... If you get the error like this"this host connect in the different VCenter. then you must restart the service vpxa in two esx host, if get error again, you must remove the vmware-vpxa in two hosts, after that it should connect again VCenter...

  How to uninstall vmware-vpxa in host: -.

  1.

  Disconnect the ESX host in VirtualCenter. Right-click on the host and click Disconnect.

  2.

  Log in as root to the ESX host using a SSH client.

  3.

  Paste the following string of commands in the SSH session:

  service mgmt-vmware stop & service vmware-vpxa stop & stop vmware-vmkauthd service & service xinetd restart & rpm - qa | grep-i vpxa | AWK '{print $1} ' | XARGS tr/min-ef $1 & userdel vpxuser & rpm - qa | grep-i aam | AWK '{print $1} ' | XARGS tr/min-ef $1 & mgmt-vmware service start & service start vmware-vmkauthd

  Note: This is a list of concatenated command strung with the "&" operator. This is useful by chaining several commands like the following command does not start until the previous completed successfully.

  Here is a description of the commands:

  4.

  *

  Service mgmt-vmware stop & stop vmware-vpxa service & service vmware-vmkauthd stop & command service xinetd restart stops the management services for the service console.

  *

  Rpm - qa | grep-i vpxa | AWK '{print $1} ' | XARGS tr/min-ef $1 command removes the vpxa agent.

  *

  The vpxuser userdel command removes the vpxa user who is installed once you connect the host to VirtualCenter.

  *

  Rpm - qa | grep-i aam | AWK '{print $1} ' | XARGS tr/min-ef $1 command removes the AAM RPM (AP) who gets reinstalled when configuring HA.

  *

  The departure of service mgmt-vmware & service vmware-vmkauthd launch the following command restarts the services.

  *

  The vmware-cmd - l command lets you know when to pass it is running so that you can connect to VirtualCenter.

  Note: When you see a list of virtual machines in output, the command sequence is complete.

  5.

  Log server VirtualCenter using the VMware Infrastructure (VI) Client.

  6.

  Select the ESX host in the inventory.

  7.

  Right-click on the ESX host and click on connect. This step starts a re-installation of the agent.

  To reinstall the components of VMware HA:

  Log in as root on the ESX service console.

  Type rpm - qa | grep-i aam

  It returns two packages that are named similar to:

  *

  VMware-aam-haa-#. #. ##-

  *

  VMware-aam-vcint-#. #. ##-

  Remove these packages with rpm - e, followed by the name of one of the returned package. Repeat for both files.

  Run the command:

  RPM - qa | grep-i vpxa

  A package named VMware-vpxa-#. #. #-# is returned.

  Remove this package using rpm - e, followed by the name of one of the returned package.

  Test the Vcenter added newly created to see if this solves the problem of the host.

  Source

  Concerning

  Senthil Kumar D

• Conecting ESX hosts running management infrastructure in vCenter

  Just need to sanity check on something.

  To date, we have conducted our infrastructure management (Mgt AD, SQL Mgt, vCenter, etc.) on the two (free) stand-alone ESXi hosts. All other ESXi hosts are then managed by the virtual instance of vCenter.

  I'm now update all the hosts of the 'management', the replacements come with ESXi Foundation, I would like to add as nodes in Virtual Center, is that going to cause difficulties?

  I guess that in the case of a failure vCenter I'll still be able to connect directly to the Mgt hosts to solve?

  Am I missing something?

  Foundation of ESXi? I assume you mean Infrastructure Foundation (ESX).

  These ESXservers to vCenter added should not cause difficulties

  and you are able to connect to the ESX Server itself, using the VI Client or ssh if the vCenter fails.

• natachasery and switch

  I'm not strong to the network domain. Can someone guide me on the configuration of physical switch between cables natachasery (esxi)

  
  

  There are 2 physical switches and there are 4 esxi host each host has 4. NIC one on-board adapter (2 network cards) - a pci adapter (2 network cards). adapter integrated with 2 network cards to connect to physical switch 1 and adapter with 2 network cards pci connect to physical switches 2 but in vcenter added vswitch1 the vmnic 0 and vmnic 2 and vswitch 2 added vmnic 1 and vmnic 3 is it true config?
  

  
  

  Yes, I know that there is no connection between your physical network adapters and the physical switches, but if you look at a level above, you will see that the "cross connection" is a vSwitch level, so if a physical switch (or network card) you won't lose connectivity in the event of failure. Take a look at the following picture:

  

• Web Client - continually loses connection - Essentials Plus 6.0.0b

  Hey guys, looking for some help on a very annoying issue.

  Essentials more 6.0.0b

  3 guests ESXi (HP DL360 G9)

  A win 2 K 8 R2 server vCenter Server hosting and platform services controller.

  I had no problem ESXi configuration on hosts, configure vCenter, adding hosts to vCenter, configure SSO with our domain name and a few virtual computer running test.

  The problem I have is with the web client.  While using it, it frequently disconnects with the message "Could not connect to vSphere Web Client.  Contact your administrator to resolve this problem. ».   It happens randomly.  I then refresh the web page, it is up to the top and it works normally again for a while until the error repeats.  This occurs by using any browser on a few different workstations.

  The client desktop ordinary vSphere works very well.  No disconnects, no errors.  It's just the web client.

  I increased the storage available in flash for the site on Unlimited. Other ideas for me to try?  I've attached a screenshot of the error in Chrome.

  I found the problem.  It is AVG Anti-Virus Business Edition, version 2016.  More specifically, in the program, it's the web component or components of the computer (resident shield), most likely the web component.  The 2013 version has similar components, but does not cause a problem with the web client.   All workstations, that I tried first had been upgraded to the version of 2016.    Disable AVG on these systems will stop the question.

  ... Now to see if I can find to change the specific settings in 2016 AVG.  I'll post here if I find.   I will also contact AVG about that, I'm sure I won't be the first person to encounter this problem.

• Choose an account to use for the Orchestrator configuration

  There are 3 places where Orchestrator requires a specific, specify the installation user account:

  1. in "Orchestrator Configuration" tab "Authentication" - registration of the Orchestrator with SSO

  2. in "Configuration of Orchestrator" on the tab "License"-> "add a vCenter Server License.

  3. in the Orchestrator Client, under the workflow "to add an Instance of vCenter.

  
  

  If after all this has been implemented successfully by an employee who uses his user account AD for these 3 functions, then later an employee leaves and the account is removed from the AD, it will cause a problem with each of the above configurations that have been made?  Will be always registered orchestrator, under license, and vCenter added Instance?  Or things begin to break / stop working?

  
  

  Thank you!
  

  SSO should continue its work and license will continue to work until the service restarts... and the controls for the license with the vCenter server... I don't think that you will be able to install any new plugins if the account has disappeared, as well.

  My recommendation would be to use a service account is configured in Active Directory or SSO vSphere.

• In vRA6.2.1 default vRO casts cannot connect to the server Orchestrator

  VRA 6.2.1 installed and configured successfully.

  VCenter added Endpoint

  Tested create workflows of catalog data center and it works very well

  Imported from my plugin for orchectrator

  Tested a workflow and throws are unable to retrieve, etc...

  VRA rebooted device

  By default orchestrator test connection failed.

  Selected option orchestrator external and provided same vRA incorporated vRO credential

  Test connection successful - don't know why it failed when I choose default orchestrator

  Now tested my workflow plugin and it works great.

  Later, I chose the default orchestrator still test connection fails - any reason?

  (1) "default orchestrator" doesn't really mean "the on-board Orchestrator. It means "the orchestrator server configured in the system by the system administrator.

  We can consult, by connecting w / system_admin and see what is there. If there is a mismatch - repair

  (2) if (1) is not an issue, then connect with the root user in the vRA WILL and run the following command "vcac-vami vco-service-reconfigure.

• vRealize Operations Manager 6 - trial and question

  Hello-

  Recently, I have deployed the trial for vRealize Operations Manager 6. I have 2 Server vCenter added, seems to work very well, but the other shows the joint as crucial. I did a little research but didn't find anything clear about the cause or the resolution of these messages. I hope someone can help point me in the right direction.

  Thank you!

  There may be services on your vCenter which are not running, or inaccessible.

• Chargeback Manager does not display the hierarchy

  Hello

  After you have created a new hierarchy, Chargeback Manager cannot display hosts, clusters, etc. In vCenterDC_Errors.log, following error appears constantly:

  2013 08-09 T 12: 48:30.442 + ERROR 0200 [StorageSyncJob (4) on VC 515] [storage. StorageSyncJob] 4433: Transport error: error 503: Service unavailable

  org. Apache.Axis2.AxisFault: Transport error: error 503: Service unavailable

  at org.apache.axis2.transport.http.HTTPSender.handleResponse(HTTPSender.java:311)

  at org.apache.axis2.transport.http.HTTPSender.sendViaPost(HTTPSender.java:200)

  at org.apache.axis2.transport.http.HTTPSender.send(HTTPSender.java:76)

  at org.apache.axis2.transport.http.CommonsHTTPTransportSender.writeMessageWithCommons(CommonsHTTPTransportSender.java:400)

  at org.apache.axis2.transport.http.CommonsHTTPTransportSender.invoke(CommonsHTTPTransportSender.java:225)

  at org.apache.axis2.engine.AxisEngine.send(AxisEngine.java:438)

  at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:402)

  at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)

  at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)

  at com.vmware.vc.sps.InternalSpsServiceStub.queryCapability (unknown Source)

  at com.vmware.vim.vcenter.datacollector.job.storage.StorageCapabilityInfoCollector.collectCbStorageCapabilities(StorageCapabilityInfoCollector.java:68)

  at com.vmware.vim.vcenter.datacollector.job.storage.StorageCapabilityInfoCollector.collect(StorageCapabilityInfoCollector.java:50)

  at com.vmware.vim.vcenter.datacollector.job.storage.Accumulator.collectAndStore(Accumulator.java:98)

  at com.vmware.vim.vcenter.datacollector.job.storage.Accumulator.accumulate(Accumulator.java:72)

  at com.vmware.vim.vcenter.datacollector.job.storage.StorageSyncJob.run(StorageSyncJob.java:54)

  And, in the GUI, the collector of data has linked errors with synchronization of storage, can someone please help me fix?

  Kind regards.

  Hello

  Could check you if the storage VMware Profile-Driven Service runs on the server vCenter added Server... ? If not, start the service. It should work

  Thank you