vCenter web access do not allow me to generate shortcuts

Similar Questions

• VMware VDM Web Access does not support your operating system (Windows7 beta)

  I got this message when connecting to the Server Desktop VDM:

  "The unmet requirements."

  VMware VDM Web Access does not support your operating system'

  my version: Office: Windows 7 beta with IE8

  I works perfectly with Vista Business SP1 (as host operating system) with IE7:

  VMWARE VDM Client version 2.1.0 build-596

  How can I solve this?

  Thank you.

  I'm not sure that there is a way to solve it.   The beta version is not in the operating systems supported on page 22 of the VDM 2.1 guide.

  http://www.VMware.com/PDF/vdm21_manual.PDF

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• (Browser) clientless SSL VPN access is not allowed.

  I'm trying to set up an additional Anyconnect vpn profile.  I have one that is working properly but this news will not.  When I try to log in to download the client or try to connect with a computer that already has the customer I can not.

  The client side receives this error: "access (Browser) Clientless SSL VPN is not allowed."

  On the ASA journal:

  4 May 10, 2010 11:42:17 722050 group user <> IP <10.12.x.x>Session is over: SVC is not enabled for the user
  4 May 10, 2010 11:42:17 group 113019 =, Username =, IP = 0.0.0.0, disconnected Session. Session type:, time: 0 h: 00 m: 00s, xmt bytes: 0, RRs bytes: 0, right: unknown

  He does reference the main our ipsec connection group name.  I think it's very strange.  Here's the part of my config that treats the ssl client.

  tunnel-group type SSL - RDP remote access only
  tunnel-group SSL-RDP-Only general attributes
  address pool SSL_VPN_Users
  authentication-server-group FUN-LDAP
  Group Policy - by default-SSL-RDP
  tunnel-group SSL-RDP-Only webvpn-attributes
  enable VPN_FUN group-alias
  allow group-url https://64.244.9.X/VPN_FUN

  internal SSL - RDP group strategy
  attributes of SSL - RDP group policy
  value of VPN-filter RDP_only
  VPN-tunnel-Protocol svc webvpn
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list RDPonlyVPN_splitTunnelAcl
  WebVPN
  list of URLS no
  SVC request no svc default
  Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
  Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
  Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
  Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
  RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389
  Comment by RDP_only-.x RDP access list
  RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389
  Comment by RDP_only-.x RDP access list
  RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389
  Comment by RDP_only-.x RDP access list
  RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389

  mask of local pool SSL_VPN_Users 10.12.20.1 - 10.12.20.100 IP 255.255.255.255

  Post edited by: kyle.southerland

  After reviewing the config, the difference between groups Anyconnect and SSL-RDP-Only is the AAA server.

  AnyConnect group uses the radius for authentication (RAS01) server, while the SSL-RDP-Only group uses an LDAP server for authentication (FUN-LDAP), and the configuration of the FUN-LDAP server, you configure the mapping of LDAP attributes, which is to map the group "An1meR0xs".

  To test, change authentication LDAP aaa RADIUS for the newly created group.

  Hope that helps.

• vCenter Forum: you are not allowed to post in this forum

  When you try to create a post in the forum of vCenter, I get this message

  "Not allowed".

  "You are not allowed to post in this forum.

  "It seems that you are not allowed to view what you requested. You can contact your administrator if you think that it is a mistake. »

  Strange, because I posted in the forums of VMware View with no problems.

  Any ideas?

  -Keegan

  Hello

  "VMware vCenter" community is a community of high level, bringing together all the different aspects of vCenter, as Manager of the update, heart rate etc. as sub-communities. You cannot create discussions in these sub-communities, listed on the right side of the page when you look at the community of high level: http://communities.vmware.com/community/vmtn/server/vcenter

  To create a discussion on the vCenter Server, please use the 'VMware vCenter Server' subcommunitiy: http://communities.vmware.com/community/vmtn/server/vcenter/vc?view=all

  Little bit confused, I know

  Concerning

• Some Web pages do not allow (safari cannot connect to the server)

  I can't access some Web pages like the movie online, eBay, Amazon, etc. sites, when I try, I got the note as 'safari cannot connect to the server' and my chrome also got error like massage "this webpage is not available" more my App Store unable to work properly can not download updates»» I tried to delete all the data of the website... and uninstall extensions, but there was not work //I got a MacBook Pro 2014 middle with OS X EL capitan 10.11.2//some on help me please

  Please remove the 'ESET' product (if you have it installed) by following these instructions. If you have a different version of the product, the steps may be different.

  Back up all data before making any changes. Never install any product "anti-virus" or "anti-malware" again.

• vCenter Web Client does not

  I recently (about 4 hours ago) installed the vCenter device on my host and had running.  When I'm with thevCenter via the client, everything goes well and I can manage the server.  The problem is that I can't seem to be able to use the web client.  I have check and the web client runs but when I go to the page I'm greeted by the default Apache screen telling me that Apache is running, but something is not configured right.  I was wondering if anyone else saw cela and if so, how you fix it.

  

  Welcome to the community,

  Try https://192.168.192.22:9443 / vsphere client

  André

• Firefox 29.0.1 will only print complete web pages, will not allow the selection of printing

  just updated to firefox 29.0.1. now, I can't highlight and print a selection. I can highlight a section, but when I hit the "print" key it goes to a page of print preview, highlighting is gone, it displays the full web page (on which I can't highlight), and then when I hit print again, I get the menu print properties, but it won't let me choose the 'selection' in the range of impression-obviously because my 'selection' disappears when I go to the page of Print Preview. There, can anyone help? Of course, I'd appreciate some tips! Thank you.

  I use a HP Pavilion Desktop, windows 7, printer HP Officejet 4500 active, of all updates

  Use Ctrl + P (file > print; if necessary press F10 to display the menu bar) to get the window with the choice of the selection.

• Error number: Ox800CCC92 using Outlook Express 6.0 for email. Password continues to be rejected. Can get in emails via the web access but not my office.

  I am trying to log into my cox on Outlook Express 6.0 e-mail account.  I keep getting rejected for an invalid password.  The same password works if I pass by internet at webmail.cox.com.  I can send and receive e-mail from there.  I tried to speak with Cox and Microsoft without success.  The full error message is:

  There was a problem connecting to your e-mail server.  Your password was rejected.  Account: 'pop.cox.net', server 'pop.cox.net', Protocol: POP3, server response: '-ERR user name or password.': Port: 110, secure (SSL): no, Server error: Ox800CCC90, error number: Ox800CCC92

  Try to use port 995 for the outgoing and 465 for incoming as shown here.

  Names of Cox for POP and SMTP mail server
  http://WW2.Cox.com/residential/Sandiego/support/Internet/article.Cox?articleid=%7Ba8fb24c0-6440-11df-CCEF-000000000000%7d

  A moderator will soon be along to move this thread to the appropriate forum such as this one is for the feedback: site forum only. Please note the forum, proposed future questions about this program or feature.

• Error access Uri not allowed in the app BlackBerry Tablet or PlayBook

  I built an app Live TV based it consist of URLs with jquery

  and my end of uri with .aspx more of. com\

  For example http://---xmlnew.aspx

  http://---xmlnew.aspx?type=lang

  http://---xmlnew.aspx?bandwidth=medium

  No problem with the url

  How should my config.xml and index.html in this case?

  You must white-list the actual URL. If those that are generated dynamically, then you will need to white list of all possible, or turn off websecurity.

• Question about web access install

  Hi all

  Can you please help me answer this question.

  setting up web access on VC is optional or not? as far as I can see, Web access is automatically installed with VC. all you need to do is specify ports, but after reading this text on web access pdf Pub, now I confused.

  -

  ---

  VI Web Access is installed when ESX Server is installed. On the VirtualCenter server, you

  can install VI Web Access from the VirtualCenter Server Windows installation package

  -

  ---

  I tried my self installation of VC but I have not any Web Access option select/deselct option

  Please clarify this point for me

  Thanks in advance

  AJ

  Hi all

  Question of Ajay on access Web is a good thing, let me clarify.

  Components access Web are automatically installed with ESX Server and vCenter Server.  At some point in the history of the product, there is an option during the installation of VirtualCenter, where you can choose to install Web access or not.  This is no longer the case at 2.5 or 4.  Web access is also enabled by default previously.  In my last use of the product, I find that the service on vCenter Server is already started, which means that Web Access is running by default.  For ESX Server, the access to the Web server is not running, but can be easily launched.  It's for vSphere 4, so fellow users, you can add what is the default status VI3 if you run this version of the product, so we have that here as well.

  Kind regards

  Jon C. Hall

  Technical developer certification

  VMware, Inc..

• Embedded Web access through the PL/SQL gateway

  Hello
  
  I'm trying to use the PL/SQL gateway embarked on an application written for 10g XE with APEX 3.2. I can access the application from the computer on which APEX is installed by going to http:// < hostname >: 8080/apex /, but this page does not load on any other computer. I followed all the steps to configure the EPG that I could find in the guide on this forum and installation, and it still does not work.
  
  Here's what I've done so far:
  (1) run the apex_epg_config.sql script to configure the EPG
  (2) unblocked the anonymous user account (EDIT USER ANONYMOUS ACCOUNT UNLOCK)
  3) updated the directory of the images (apxldimg.sql)
  (4) set the port HTTP (EXEC DBMS_XDB. SETHTTPPORT (8080))
  (5) enabled remote access (exec dbms_xdb.setListenerLocalAccess (l_access = > FALSE))
  
  Any thoughts on why web access may not work? Is there something else I need to do before users can access my application on the internet?
  
  Thank you
  Josh

  Well, you tried to shut down (or add an exception) / firewall/antivirus?

  Published by: Felipe Bertaglia on July 28, 2009 19:36 - / antivirus

• Make a REST Web service call. Error code: 401 Access to the requested resource is not allowed

  Hi all

  I'm having a hard time finding ways to Rest Web service calls.

  I tried this runs directly through the browser and I get an error.

  http:localhost:8080/r EST/bean/atg/userprofiling/ProfileServices/loginUser? [email protected] & arg2 = password

  13:18:20, 613 [RestSecurityServlet] error code: 401

  Access to the requested resource is not allowed: / atg/userprofiling/ProfileServices

  1. atg.rest.RestException: access to the requested resource is not allowed: / atg/userprofiling/ProfileServices

  at atg.rest.processor.RestSecurityProcessor.checkAccess(RestSecurityProcessor.java:546)

  at atg.rest.processor.RestSecurityProcessor.handleGetRequest(RestSecurityProcessor.java:313)

  at atg.rest.processor.RestSecurityProcessor.doRESTGet(RestSecurityProcessor.java:199)

  at atg.rest.servlet.RestPipelineServlet.serviceRESTRequest(RestPipelineServlet.java:417)

  at atg.rest.servlet.RestPipelineServlet.service(RestPipelineServlet.java:260)

  at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)

  at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:320)

  at atg.rest.servlet.RestPipelineServlet.service(RestPipelineServlet.java:264)

  at atg.rest.servlet.HeadRestServlet.service(HeadRestServlet.java:130)

  at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:267)

  Documentation, I understand that I need to create a session, the session is needed to access the secure components since this

  method specific 'ProfileServices.loginUser' was declared as non-secure, restSecurityConfiguration.xml

  In addition, there are two different ways in which I can connect

  1. 1. with the help of RestSession.createSession providing the user name and password.
  2. 2. or by using ProfileServices.loginUser or ProfileFormHandler

  Can someone please clarify

  If you call the REST web service from a Java client, you can create a RestSession object using the createSession method. But in your case you seem to be invoking it with an HTTP request, which, by default, would be considered a GET request by application of the REST of the ATG. So either a GET, he would try to get a property "loginUser" of the component/atg/userprofiling/ProfileServices (based on your URL) that would always fail.

  To call the method ProfileServices loginUser() with your argument, you need to tell the system to the REST of the ATG to process your incoming request not GET, but as a demand that you can do to atg-rest-http-method of the parameter control in your application like this

  http:localhost:8080/rEST/bean/atg/userprofiling/ProfileServices/loginUser? [email protected]& arg2 = password & atg-rest-http-method = POST

  It should work in this way, your restSecurityConfiguration.xml is correct.

• After the upgrade to Windows 10, I was not able to access my email to Outlook Web Access. I get this message: error HTTP 401.2 - Unauthorized: access is den

  Firefox stopped 40 access Outlook Web access, a week ago. I always get the following message:

  You are not authorized to view this page
  You have no permission to view this directory or page using the credentials you provided as a Web browser sends a header field WWW-Authenticate the Web server is not configured to accept.

  Please, try the following:
  Contact the Web site administrator if you believe you should be able to view this directory or page.
  Click the Refresh button to try again with different credentials.

  Error HTTP 401.2 - Unauthorized: access is denied due to server configuration.
  Internet Information Services (IIS)

  Technical information (for support personnel)
  Go to Microsoft Product Support Services and perform a title search for the words HTTP and 401.
  Open IIS Help, which is accessible in IIS (inetmgr) Manager and search for topics titled words of security, authentication and Custom Error Messages.

  Thank you for your help.
  Najib

  Firefox 40 change something that affects authentication: is no longer, it appears a name of user and password dialog box to prompt for credentials for embedded resources if they are hosted on a different server. These can include a framed page, an external script or an image, for example.

  If you right-click on the error page, "This frame" appears on the menu? If so, who might follow and Open Frame in a new tab to see if it is hosted on a different server? If you reload the page without frame, it works normally?

  If you are unable to work around the problem by unframing page, you can undo the change as follows. Of course, please be wary of this guest appearing on other sites where it can be to get you to reveal your credentials to another site.

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste auth and make a pause so that the list is filtered

  (3) double-click the preference of network.auth.allow - subresource-auth and edit the 1 to 2, and then click OK

  • 1 shows the dialog box logon only for pages framed, images, etc., hosted on the same site
  • 2 allows the connection to pages dialog box framed, images, etc., hosted on any site

  -What changes anything with your OWA server? If not, you can restore its default value definition; It must be something else.

• How to solve the local origin: / / is not allowed by Access-Control-Allow-Origin.

  I try to use the $.ajax call other service, this method of correct running on iphone, android, but failed on Simulator bb10,.

  get the message from the web Inspector:

  XMLHttpRequest does not load http://www.example.com/getData

  Place of origin: / / is not allowed by Access-Control-Allow-Origin.

  I added in the config.xml file.

  I try to google for the solution, but I failed, can anyone help me, thank you.

  I've solved, I think that the blackberry document must provide detailed on webworks settings.

  This losing my several times.

• Access to the LAN IP is not allowed

  Hello

  I'm doing an Ajax call to an IP local netowork by Wi - Fi on a port other than 80...  When it is run on a real device, I always get 'access to XYZ is not allowed"where XYZ is the URL of my attempt.

  The app is intended to be an application of management of an area of material from a certain manufacturer that the user has on their home network. The online 'Cloud' service API tells the application what is the local IP address of the box, then the application is attempting to establish API calls against unity on this IP address.

  Calling example: http://192.168.2.15:1234 / api_call_here

  In the config.xml file, I tried many things, including:

  .. .and...

  http://192.168.2.15:1234"/ > (which does not work for me in production, since I never know before hand local IP address)

  .. .but nothing seems to allow the connection to another LAN IP. WebInspector indicates that the connection has been blocked by NativeCode:1.

  Can it be done?  Or that somehow blocked by the framework?

  Thank you

  DOM

  Overall whitelisting for XHR is not currently supported.

  For your scenario to work, you will need to disable the web security.