Question about web access install

Similar Questions

• Various Questions about wireless access controller

  Help me please with these fundamental questions about the role of the access (AC) wireless controller.

  Assume that the access controller and Access Point are connected via IP:

  -Wireless frames sent to AP to acre; include the original MAC header (on the way to wireless access)?  If Yes, is there a Cisco AC gets to fill the WLAN and LAN it is plugged (which means that it outputs as ethernet frames as if they were issued by Mobile Stations).

  -Is the AC necessarily the default gateway for mobile stations? I guess not. But it is possible the default gateway?

  The Cisco AC can function as a DHCP relay?

  The AP creates a tunnel to the controller. All IP traffic from the AP to the controller will address the AP source and dest IP to the interface of the Manager of the AP on the controller. The wireless client traffic is encapsulated inside this tunnel. When it hits the controller the CAPWAP is removed leaving the customer's original package to be sent to the local network through the controller.

  The controller should not be the default gateway for wireless clients because it is not a router. Think of it as a device that converted into wired wireless traffic.

  Normally, the controller acts as a proxy DHCP. Once the customer has joined a WLAN, the controller sends the DHCP packets to the DHCP server on behalf of clients such as the IP address of assistance normally configured on the router for cable customers. You can also configure the controller to act as a DHCP server for wireless clients.

• Questions about web browser Blazer

  Hello!

  This forum gave me WebOS Software. Here are my questions:

  1. somehow my husband lost him "want to connect to the internet... "questions when he opens the Web. Is there anyway to get it back? HEW doesn't have the internet on its Centro package like he uses it rarely, so I want it to be aware of when it connects.

  2. when my husband opened Web is only to copy ring of his card in the phone. Who is using the web? See Article "Understanding ringtones" #45124. We only are not be charged for this last (yay!)

  Thank you

  Clare

  Thank you!

  He was opening a blank page (hopefully) and I noticed after that tapping GB (when looking for a file) the shipment had a red X in front of it. No arrows or black triangle well, only the bolt, world, House, box w/little horizontality and signal strength flat contraption. But it's OK as long as it is not plug.

  Clare

• Question about web gateways OAM and load balencie interaction.

  Must before the web gateway load balancing OAM maintain sessions?
  
  The platform is Microsoft Windows Server 2003 R2.
  
  Any comment is appreciated.

  When the user authenticates OAM defines the obSSOcookie that contains all the details of this user's session. If a user accesses ANY webgate configured for SINGLE sign-on in this area, no new authentication is required. The Webgate knows the user identity based on the details of the obSSOCookie, and authorization rules OAM for this domain policy kick in. This occurs regardless of any load balancer hardware or backend even application. Therefore, you load balancing should not be configured for the post-it, just for the Webgate and SSO sessions. An important consideration is that your load balancing program is setup for NAT or not. This will affect the IPValidation parameter. If the NAT is used, then you must turn off IPValidation, or use an exception IPValidation for the VIP on the load balancer.

• Questions about scripts in ai2

  Hello
  
  Two questions about the new install script.
  
  (1) where to find documents on the "object model" which is available for use during the writing of scripts. There the Javadocs available to all classes, getters, setters, etc that can be used?
  For example, I want to write a custom rule to detect foreign keys "without columns. For some reason, this error occurs during generation DOF, but I have not found a standard rule of prior design detect these problems before the generation of DDL. So, I'm interested in knowing how to navigate through the object model to create a rule of mine (IE is it a table.getFK (.getColumns ()) use?).
  
  (2) is it possible to use Groovy as a scripting language? If Yes, does anyone have the docs (or even draft notes) on how join as a script engine in the Data Modeler?
  
  Thank you, BP

  Hi BP,.

  to detect foreign keys "without columns. For some reason, this error occurs during generation DDL

  What version did you use to create these cases? There was such a problem in one of the pre-production versions published two years ago.

  Meta definitions, you can watch datamodeler\datamodeler\xmlmetadata directory.
  In fact, it is preferable to define the rule of index/constraint - you will get a clue that is used to represent the PK, UK, the FK constraints and indexes.
  So for your rule, you select index/constraint as object and the next Java scrip will be your rule:
  var index;

  {if (index.isFK () & {index.getElements () .length == 0)}
  fake;
  } else {}
  true;
  }

  If you remove index.isFK (control) then the rule will be valid for all PK, UK, the FK constraints and indexes.

  For script engines - you can start here - https://scripting.dev.java.net/
  I see groovy is supported - http://groovy.codehaus.org/JSR+223+Scripting+with+Groovy
  How to install it - you can follow the instructions in the first link above, it's much easier just to copy related jar in the "ext" directory - for groovy I copied "groovy - 1.7.5.jar" (I downloaded 1.7.5 version)
  in the "D:\jdk1.6.0_20\jre\lib\ext" directory on my computer. You must restart the Data Modeler - I engine script groovy as a choice in the engine drop-down list box.

  You must test how Groovy will return true or false for the Data Modeler - generally ordinary (not library), it is strange that you see in the example. If the library is used then the standard return is used.

  Philippe

• Question about Dell OEM: SLP Windows 7 Installation disk domestic; can it be installed and activated on other computers from Dell?

  I bought a Dell installation disk and I want to use it to install a better version of Windows on my Dell PC. I have windows Vista and I want to use it to update my OS Windows7 Home Premium. However, the license type is SLP:OEM and no detail... not sure what SLP: OEM means... I thought that the OS discs are the same. Someone told me no retail editions are not suitable for a new OS, but I'm confused. The disc says, Windows 7 Home premium 64-bit, but didn't holograms who have all MS OS disks and the disk is labeled for use with a Dell system only, if the means it will work very well on my Dell PC? The label does not which brand or model this disc is for, but said only for the Dell PC which is my PC. I'm assuming, the disk won't work on all Dells, maybe someone can offer suggestions, any help is much appreciated. Thank you!

  I have a few other questions about Windows 7, can I ask you about this on your Web site? Do not know how to contact you on your website. I can see other people responding to your articles, but that's all. I thought that maybe their might be a forum to post a question... Thank you for everything.

  You can comment on my site but comments will be public and it is easier to answer questions in the forums.

  If you want to be more precise, you can post in the Dell Community Forums. :

  http://en.community.Dell.com/support-forums/software-OS/

  There are also ways to private message me there is something I don't think that can be done by non-moderateurs on Microsoft Answers. However, I prefer answering questions on the forum:

  http://en.community.Dell.com/members/natakuc4

  Concerning the compatibility with Windows 7, I have listed a full pilot system here compliment:

  http://dellwindowsreinstallationguide.com/driver-sets/Inspiron-desktops/Inspiron-518-Windows-7-64-bit/

  Theres nothing to worry about your circuit board, the only driver who can break your system's BIOS update. I only list the last official update BIOS list Dell in my unofficial driver sets.

  The webcam should be covered by Dell Webcam Central but what is the monitor?

  http://ftp.Dell.com/Monitors/Dell_SX2210-Monitor_Webcam%20SW%20RC1.1_%20R230103.exe

  The main difficulty is to get a genuine product key Windows 7 64 bit. The time now it's easier to buy the 64-bit Windows 8.1. No matter if you buy Windows 7 or 8.1 64-bit both going to Windows 10 free when the RTM is out.

• A few questions about the making of the animated for a site Web Nav buttons

  Hello, I have a few questions about creating some animated for a NAV buttons.

  There are 2 actions I want to trigger on pouting above.

  If I want to use a static (PNG) image I created in Photoshop for the real button, can I use that? I want well drag the button down on the passage of the mouse and drag upward on the mouse. If I push the part of the "Web" button (sorry, that it comes from a Photoshop guy) it will disappear in the final animation? Another way to say this, if I put something lively off the coast of the white area, it no longer appears in the movie (.swf) when it is published?

  For the second part. You can see a bit of what I want to do if you look high Nav of the page of the website: http://www.photoshopsupport.com/index.html

  I need the 'light' above the button and it's going to be on another < div > color so I can't put a solid color of BG for my flash document. But I want to get the effect of the 'bar' lighting up above the button and the real key slide downwards to pouting on.

  You can provide any help would be greatly appreciated.

  We target the dynamicaly graph. Since the MouseEvent is now on the invisible sprite and not the graph itself, the one-for-all function has no reference to this graph. You can access the invisible sprite with event.target (or event.currentTarget), you can also target the chart because we declared "mygraphic" custom property to serve as a reference for the graphic. Thus, event.target.mygraphic is the benchmark for graphics.

  Of course, this is just an example. There are other variations of this trick.

  ____________________

  Design Cyboide

  Web site creation

• How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  Feel free to change the title

  How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  You're talking about Facebook?

  Try the gyration of the Secure Browsing

  http://www.Facebook.com/help?page=1079

• Question about Auth Web certificate for WLAN Ciscon controller

  We test a Cisco's WLAN controller and I'm a bit confused about Web authentication certificate.  We use the Microsoft Certificate Services and we want to use it for authentication certificate.  The question I have is how to generate a CSR on the WLAN Ciscon controller so that I can generate a certificate on our CA internal?

  Thanks in advance

  This document will guide you through the process:

  http://www.Cisco.com/en/us/products/ps6366/products_configuration_example09186a0080a77592.shtml

• A few questions about installing Windows on a Mac

  Hello world.

  I'm considering installing Windows on my 2006 iMac. I have a few questions I was hoping you might be able to help me with that. I know that this machine will run Windows 7 or 8, in terms of system resources, but probably doesn't have the RAM for 10.

  The girl has reached Apple Obsolescence and no longer can be upgraded to newer versions of Mac OS. Unfortunately, this also means that she can not get the latest version of iTunes and don't talk to my phone. But she still my entire library of music.

  I know that used at least iTunes is available on Windows, but I seem to remember that they took it. Y at - it an option to put my iTunes music on an iPhone 6 in a Windows environment? I don't mind if I need to convert files or otherwise work for her. I have just a few old out-of-print stuff that I really miss being able to listen to anywhere other than my office.

  I'm pretty much stuck with versions before 10, due to the RAM thing. Honestly, I haven't used Windows since around 1998, with the exception of a terminal XP at work, so I don't know much about it. Any recommendation on which version is the best? And I can buy a copy online directly from Microsoft?

  If I would be better off buying a new laptop for very cheap, it is also a possibility. But my Mac still works well, despite not being not supported for updates, and I hate wasting perfectly good material. I just don't have the money for another Mac right now.

  Hello

  Any questions on iTunes, the best place to ask the community Apple iTunes is their program, not Microsoft.

  @@@@@@@@@@@@@@@@@@

  Microsoft sells more XP, Vista, 7, or 8/8.1.

  End of sale: http://windows.microsoft.com/en-au/windows/lifecycle#section_2

  Try Amazon.com, etc.

  See if this helps you:

  "Install Windows 8.1 on a Mac".

  http://Windows.Microsoft.com/en-us/Windows-8/install-Windows-on-Mac

  And take a look at this article:

  "By using Boot Camp to install Windows and tools from dev on your Mac"

  https://msdn.Microsoft.com/en-us/library/Windows/apps/jj945423.aspx?f=255&MSPPError=-2147217396

  "Boot Camp 5.1: frequently asked questions about the installation of Windows 8.

  5.1 Boot Camp supports operating systems Windows 8.0 and 8.1 of Windows on Mac with Intel processor.

  https://support.Apple.com/en-us/HT201457

  See you soon.

• Question about installing windows on a Macbook Air

  Hello!

  I was just wondering if I would be able to use the student updated Windows Upgrade Pro 8 (the http://www.microsoftstore.com/store/msapac/en_GB/pdp/Windows-8-Pro-Upgrade---Student-Offer/productID.282175100) to install Windows 8 on my Macbook with BootCamp. Or Windows products 8 student updated only applies for machines with existing versions of Windows installed?

  Thank you!

  Hi Tatiana,

  If you are still looking for more details here is what, in my view, could help you.

  As Shenan Stanley says, if you do not have a qualifying previous OS such as Windows XP, Vista or Windows 7, you can not use the Windows 8 Pro Upgrade. Also, here is a link that talks about

  Boot Camp: Frequently asked questions about the installation of Windows 8

  I hope this helps.

• Question about installing standalone Agent in patched environment

  Hi all

  I have a question about the installation of an autonomous Agent of ODI, some information on the situation: I have Studio ODI 11.1.1.7.0 installed and configured. Everything worked fine until we have improved our environment from planning to 11.1.2.3.500 patch.  We had to apply the patch 18687916 for ODI solve some problems, but everything worked well again after that.  Now I need to install an autonomous agent to run scenarios in a batch, the agent will be on the same server as the ODI studio.  My question is can I run the installer and only select the autonomous agent then reapply the patch 18687916 or do I need to get out the patch 18687916 first, or something totally different? 

  Hello

  I think you should restore the 18687916 patch and then install the standalone agent, then patch 18687916 it.

  But wait answer of the guru.

  In my case, I did the thing above, and it works very well if it was my test environment.

  Thank you

  Pratik

• HTML (Web), I have a question about the models.

  Hello CC animate developers.

  New features are really good.

  HTML (Web), I have a question about the models.

  <! DOCTYPE html >

  < html >

  < head >

  < meta charset = "UTF-8" >

  < title > $TITLE < /title >

  < meta name = "ad.size" content ="width = $WT, height = $HT" > "

  $CREATEJS_SCRIPTS

  $SCRIPT_START

  var canvas, stage, exportRoot;

  function init() {}

  $CJS_INIT

  }

  $PLAYSOUND

  $SCRIPT_END

  < script type = "text/javascript" >

  "clickTAG" var = "";

  < /script >

  < / head >

  < onload = "init (); the body"style =" background-color: #D4D4D4; " margin: 0px; ">

  < a href = "javascript:window.open (window.clickTag)" >

  < div style = "position: absolute;" cursor: pointer; box-sizing: border-box; border: 1px solid #000000; overflow: hidden; height: $HTpx; Width: $WTpx; Background: rgb (255, 255, 255.0); "> < / div >

  < canvas id = "$CANVAS_ID" width = "$WT" height = "$HT" style = "background-color: $BG" > < / canvas >

  < /a >

  < / body >

  < / html >

  In the example above, the model;

  < Meta name = "ad.siz of" content = "width = $ WTI height = $ HT" > "

  and

  < Div style = "position: absolute;" cursor: pointer; box-sizing: border-box; border: 1px solid # 000000; overflow: hidden; height: $HTpx; Width: $WTpx; Background: rgb (255, 255, 255.0); "> < / div >"

  I use labels. But these tags in the template and import, it gives an error does not occur.

  I think it was a mistake. I want to help in this regard.

  $ HT or Properties $WT , I get an error when I use elsewhere.

  I think I should be able to use anywhere I want.

  The same problem here - I worked around by some DRM models with different values of ad.size, but it's a solution quite short-seight

  Also - you are not able to create the model with transparent background by removing style = "" background-color: $BG ' as it also throws errors - is the only solution that I managed to get updates style = "background-color: $BG; background: none; ", but it's a really bad way of coding things.

  It would be really great to have freedom in changing patterns.

• Please, I want to ask questions about photoshop cc 2015 when I install on my pc I have message means that I have to change my screen althoug I later change my pc and I vedio card 2 gb

  Please, I want to ask questions about photoshop cc 2015 when I install on my pc I have message means that I have to change my screen althoug I later change my pc and I vedio card 2 gb

  Thanks for the update.

  I shared the article of the same error: error: "Photoshop has encountered a problem with the display driver"

  You need to update your graphics card drivers.

• a few questions about the migration of content/web content

  Hi all
  
  
  I have a few questions about the migration of the website and content (from development to test) which are not specified after reading the oracle documentation.
  
  -> When we make the site replication will be migrated content (data files).
  
  -> when we move will contained all the ED and RD etc (any object type web site migrated).
  
  --> are the two the necessary step for migration when we migrate web site.
  
  
  Thank you
  
  -Yves

  --> When we make the site replication of the content will be migrated (data files).

  It depends on how you do it. The tool 'Site Studio Replicator' won't move any content, only the structure of the site. The 'Manage replication Site' page can be used to migrate content with the structure of the site but I do not recommend for large sites, I use separate tasks to archive to move the content. "Backup and restore" page stores the entire site in a ZIP file, not advisable for large sites.

  --> When migrate us content will be all ED and RD etc (any object type web site migrated).

  Yes. It uses the metadata xWebsites field to identify the elements that belong to the site.

  --> are the two the necessary step for migration when we migrate web site.

  Depends on how you do it, but yes, all bits are needed.