VCO get virtual machines by name never ends
Hello
I have a problem, when I run the virtual machines by name get, nothing is returned and it never ends. I have another script that tries to do:
VcPlugin.getAllClusterComputeResouces)
and it ends never either. I did successfully before but no it does not, it is as if something is wrong with the vCenter or something. If I log in the vCenter I can look up and see all the clusters and virtual machines, but I can't ask him to the VCO.
Any ideas on this would be useful.
Thank you
The issue was the vCenter for this device VRO had run into issues and querying the vCenter did not work from the VRO device. After restarting the device of VRO polling was very good.
Tags: VMware
Similar Questions
-
Get the address IP of the virtual machines by name of VLan
Dear,
There the script for the list of virtual machines with its IPS and VLANs?
as VLan VMName name, IP Address,.
Concerning
Rajesh
The following modification of my previous script shows that IPv4 IP addresses:
Get - VM |
{ForEach-Object
$VM = $_
$VM | Get-VMGuest | Select-Object - ExpandProperty NIC |
{ForEach-Object
$Nic = $_
foreach ($IP in $Nic.IPAddress)
{
If ($IP. Contains('.'))
{
"" | Select-Object - property @{Name = "VM"; Expression = {$VM. Name}},
@{Name = 'IP address'; Expression is {$IP}},
@{Name = "NetworkName"; {Expression = {$NIC.NetworkName}}
}
}
}
} -
Get virtual machines in a subnet
I need to get all the virtual machines in a subnet given with something like this:
Get - vm | where {$_.2ndOctet - eq "110"} #(vous voyez l'idée)
How can I select a set of virtual machines based on their IP address so that I get all virtual machines in the subnet 10.110.0.0/16?
Thank you!
The easiest way would be something like this:
Notice-EEG - ViewType VirtualMachine. Where {$_.guest.} IpAddress-like "10.110. *. * »} | Select Name, {$_.guest.} Ip_address}
If you are comfortable with regular expressions you could do something like this as well:
Notice-EEG - ViewType VirtualMachine. Where {$_.guest.} IpAddress-match "10\.110\. [65-66]. * »} | Select Name, {$_.guest.} Ip_address}
-
Stop/start multiple virtual machines with names created automatically
Hi all
in my test environment, I want to stop or start multiple virtual machines via the script.
Their name is always like this:
'vm-100-qa', 'vm-101-qa","vm-100-qa","vm-102-qa '...
Now I would like to just stop every VM 'vm-140-QA' to 'vm-160-qa.
I created a table "$a = 140.160", but I don't know how to implement this in a script 'Shutdown-VMGuest-comments '.... »
Sorry for this stupid question. I am a beginner absolute powershell.
Thank you very much in advance,
Petrie
You can do something like this
140..160 | %{ Shutdown-VMGuest -VM "vm-$_-qa"}
-
30EA2: Keep Getting "redevelopment" dialog box that never ends during Migration
I get a dialog box which is soberly titled "Upgrade" in the Migration Wizard. Initially, I was getting it over the stage? (Selection of the repository). I simply tap the Cancel button and it seemed to allow me to move forward, but then no data have been identified in step 5 of the Wizard (screenshot).
Then I tried offline migration and now I get the dialogue when I click on the button 'Finish' at the end of the Wizard (step 9). The "Cancel" button is disabled and only the 'Close' button is available. When I click on 'Close' to clear the dialog box, I get an error in the wizard: "cannot use this connection for the Migration repository, no update available."
Upgrade, Upgrade, Upgrade... What hell he is talking about?The migration repository was created using an older version of SQL Developer? In this case I delete the repository and create it using 30EA2.
Concerning
Wolfgang -
Hello
I entered the following two functions in my shell powercli
Two functions I have installed function {Get-VMEvents
< #.
. Logbook
Get events for an entity or query all events.
. Description
This function returns the events for the entities. It is very similar to
cmdlet Get-vievent. Please note that get-VMEvent can handle 1 vm at a time.
You can't send picture of vms in this version of the script.
. Example of
Get-VMEvents 0All-types "VmCreatedEvent", "VmDeployedEvent", "VmClonedEvent".
He will receive all events of type "VmCreatedEvent", "VmDeployedEvent"
'VmClonedEvent '.
. Example of
Get-VMEvents-name 'vm1' - type 'VmCreatedEvent '.
Will be out of the events of creation of virtual machine: "vm1. It's faster than the vms piping is of
result of Get - vm. There is no need to use get - vm to move names to get-vmevents.
Yet, it is OK when you do, it will be just a little more slow < span class = "wp-smiley wp-emoji wp-emoji-blink of eye" title = ';') > ;) </span >
. Example of
Get-VMEvents-name 'vm1' - category 'WARNING '.
Will be out all events for vm: 'vm1. It is is faster than the names of piping of
cmdlet Get - vm. Category will get-vmevent to search only the defined category
events.
. Example of
Get - vm "vm1 | Get-VMEvents-types "VmCreatedEvent", "VmMacAssignedEvent".
Shows events for vm1 which will be regarding the events of creation,.
and events when when / what mac address is assigned
. VM parameter
This setting is a unique string that represents the name of the vm. He expects this single vm name
There in the virtual Center. Now in the first version of the script, it will only load a case
where there is 1 instance of vm selected name. In the future it will load multiple as
Well.
. Types of parameters
If none is specified, it will return all the events. If specified will return
Only the events with selected types. For example: "VmCreatedEvent."
"VmDeployedEvent", "VmMacAssignedEvent" "VmClonedEvent", etc...
. Category of a parameter
Possible categories are: warning, info, error. Please use this setting if you
you want to filter events.
. Setting all the
If you need to set this parameter, so command queries all events
Center Virtual Server virtual machines.
. Notes
NAME: VMEvents
AUTHOR: Grzegorz Kulikowski
LASTEDIT: 09/11/2012
DOES NOT? #powercli @ irc.freenode.net
. Link
# >
(param
[Parameter (ValueFromPipeline = $true)]
[ValidatenotNullOrEmpty()]
$VM,
[String []] $variétés.
[string] $category,
[switch] $All
)
$si = get-view ServiceInstance
$em is get-view $si. Content.EventManager
$EventFilterSpec = new-Object VMware.Vim.EventFilterSpec
$EventFilterSpec.Type = $types
{if ($Category)}
$EventFilterSpec.Category = $category
}
If {($VM)
$EventFilterSpec.Entity = new-Object VMware.Vim.EventFilterSpecByEntity
switch ($VM) {}
{$_-is [VMware.Vim.VirtualMachine]} {$VMmoref = $vm.moref}
{$_-is [VMware.VimAutomation.ViCore.Impl.V1.Inventory.VirtualMachineImpl]} {$VMmoref = $vm. ExtensionData.moref}
default {$vmmoref = (get - view - ViewType virtualmachine-filter @{'name' = $VM}) .moref}
}
$EventFilterSpec.Entity.Entity = $vmmoref
$em. QueryEvents ($EventFilterSpec)
}
If {($All)
$em. QueryEvents ($EventFilterSpec)
}
}
function get-vmcreationdate {}
< #.
. Logbook
Gets if possible virtual machine created.
. Description
This function will return the object with information about the creation time, method, of months,.
creator of particular virtual machine.
VMname: SomeVM12
Createduserid: 10/08/2012 11:48:18
CreatedMonth: August
CreationMethod: cloned
Creator: office\greg
This function displays NoEvent property in case when your VC do not
more information on these specific events, or your vm events no longer have
entries for the subject being created. If your VC data base has more tension date it is no longer possible
you find this event.
. Example of
Get-VMCreationdate - VMnames 'my_vm1', 'My_otherVM '.
This will return items that contain date information of creating virtual machines with names
myvm1 and myvm2
. Example of
Get-VM-location 'Cluster1 | Get-VMCreationdate
This will return items that contain information created for virtual machines that are
Located in Cluster1
. Example of
Notice-EEG - viewtype virtualmachine - SearchRoot (get-datacenter "mydc") user.user | Get-VMCreationDate
This will return items that contain information created for virtual machines that are
located in the data center "mydc" container If you use this feature in an existing loop where you
having the cmdlet get-view virtual machines, you can pass them via pipes or as a parameter VMnames.
. Example of
$report = get-cluster "cl-01' | Get-VMCreationdate
$report | Export-csv c:\myreport.csv
Stores all reported creationtimes object in the array $report variable and export the report to a csv file.
You can also filter the report before you write in the csv file using select
$report | Where-Object {$_.} {CreatedMonth - eq "October"} | Select VMName, CreatedMonth
So that you see only the vms that have been created in October.
. Example of
Get-vmcreationdate - VMnames "my_vm1", testvm55
WARNING: my_vm1 is not found, typo?
VMname: testvm55
Createduserid: 05/10/2012 14:24:03
CreatedMonth: October
CreationMethod: NewVM
Creator: home\greg
In case when you receive virtual machine that is not appropriate in the infrastructure of yor, a warning is displayed.
You can always store the full text of the report in the $report variable, but it includes all the information on
dates of creation of the missing vm. A warning always only for your information there is
probably a typing mistake in the name of the virtual machine.
. Parameter VMnames
This parameter must contain objects of virtual machine or strings representing vm
names. It is possible to supply this function wiith VM objects coming from get - vm or
get - view.
. Notes
NAME: Get-VMCreationdate
AUTHOR: Grzegorz Kulikowski
LASTEDIT: 27/11/2012
DOES NOT? #powercli @ irc.freenode.net
. Link
# >
(param
[Parameter (ValueFromPipeline = $true, mandatory = $true)]
[ValidateNotNullOrEmpty()]
[Object []] $VMnames
)
{in process
{foreach ($vm to $VMnames)
$ReportedVM = "" | Select VMname Createduserid, CreatedMonth, CreationMethod, creator
If ($CollectedEvent = $vm |) Get - VMEvents - types "VmBeingDeployedEvent", "VmRegisteredEvent", "VmClonedEvent", "VmBeingCreatedEvent" - ErrorAction SilentlyContinue)
{
If ($CollectedEvent.GetType ().) IsArray) {$CollectedEvent = $CollectedEvent |?} {{$_-is [vmware.vim.VmRegisteredEvent]}}
$CollectedEventType = $CollectedEvent.gettype () .name
$CollectedEventMonth = "{0: MMMM}" $CollectedEvent.CreatedTime f
$CollectedEventCreationDate = $CollectedEvent.CreatedTime
$CollectedEventCreator = $CollectedEvent.Username
Switch ($CollectedEventType)
{
"VmClonedEvent" {$CreationMethod = "Cloned"}
"VmRegisteredEvent" {$CreationMethod = "RegisteredFromVMX"}
"VmBeingDeployedEvent" {$CreationMethod = "VmFromTemplate"}
"VmBeingCreatedEvent" {$CreationMethod = "NewVM"}
default value {$CreationMethod = 'Error'}
}
$ReportedVM.VMname = $CollectedEvent.vm.Name
$ReportedVM.CreatedTime = $CollectedEventCreationDate
$ReportedVM.CreatedMonth = $CollectedEventMonth
$ReportedVM.CreationMethod = $CreationMethod
$ReportedVM.Creator = $CollectedEventCreator
} else {}
If ($?) {
If ($vm - is [VMware.Vim.VirtualMachine]) {$ReportedVM.VMname = $vm.name} else {$ReportedVM.VMname = $vm.} ToString()}
$ReportedVM.CreatedTime = 'NoEvent.
$ReportedVM.CreatedMonth = 'NoEvent.
$ReportedVM.CreationMethod = 'NoEvent.
$ReportedVM.Creator = 'NoEvent.
} else {}
$ReportedVM = $null
Write-Warning "$VM is not found, typo?
}
}
$ReportedVM
}
}
}
Now, if I use the first command
Get - vm testvm
I get a response of
Name PowerState Num CPU MemoryGB
---- ---------- -------- --------
Receiving TestVM 4 4,000
But if I do
Get-vmcreationdate testvm
he responds with
WARNING: testvm is not found. misspelling?
I can't understand why he says this?
What will be the final objective to query the server vcenter set and export a CSV of the creation of each day VM - is their an easier way to do it?
I was intending to use
get - vm | Get-VMCreationDate | Export-Csv-path "d:\\reports\vmcreationinventory.csv ".
But at the present time, each unique virtual machine is indicating "is not found."
Attached is an example with a virtual machine called gbvls
Although you may be better communicate with the author of these functions, from what I can tell, it seems to indicate that none of the specified events were found for these virtual machines.
You can check if there are targeted with the cmdlet Get-VIEvent ordinary events.
If you can see events, there could be a problem with the Get-VMEvents function.
$vmName = 'testvm '.
$tgtEvents = "VmBeingDeployedEvent", "VmRegisteredEvent", "VmClonedEvent", "VmBeingCreatedEvent".
$vm = get-VM-name $vmName
Get-VIEvent-body $vm - MaxSamples ([int]: MaxValue) |
Where {$tgtEvents - contains $_.} GetType(). Name}
-
Get the VM from the list of virtual machines serial number?
Property. I have been breaking my head against that for hours and finally gave up and ask me for help. I have this function below that I found at http://www.peppercrew.nl/index.php/2011/04/get-virtual-machine-bios-serial-number/.
It works fantastic for an individual VM, however I have a list of 250 VMs that I need this information, because our management software requires a unique serial number for each virtual computer.
I tried to edit the script to import from a .txt file and information through a foreach loop and am just not having any success. What I am doing wrong?
function Get-VMSerial{ $VMList = Get-Content C:\VMList.txt foreach ($VM in $VMList){ $VirtualMachine = Get-VM $vm.name param([VMware.VimAutomation.ViCore.Impl.V1.Inventory.VirtualMachineImpl]$VirtualMachine) $s = ($VirtualMachine.ExtensionData.Config.Uuid).Replace("-", "") $Uuid = "VMware-" for ($i = 0; $i -lt $s.Length; $i += 2) { $Uuid += ("{0:x2}" -f [byte]("0x" + $s.Substring($i, 2))) if ($Uuid.Length -eq 30) { $Uuid += "-" } else { $Uuid += " " } } Write-Output $Uuid.TrimEnd()} }
How to watch your CSV?
You have a header of column in there? Something like
Name
VM1
VM2
In this case, you can change the last line
Get-VM (Import-CSV C:\VMList.csv | Select -ExpandProperty Name) | Select Name,BIOSNumber
-
New virtual machine migrated script DVS/PG
I would extend this script with the possiblilty of typing any virtual machine can be used for migration.
I get this error
As the pipeline input channels are not supported
$strvm = Read-Host "Please enter the name of vm | Get-NetworkAdapter | Together-NetworkAdapter - NetworkName (Get-VirtualSwitch-distributed - name MyDVSwitch |) Get - VirtualPortGroup - name 'virtual machines'). Name
Try like this
$strvm = Read-Host "enter the name of the virtual machine.
Get-VM-name $strvm | Get-NetworkAdapter | Together-NetworkAdapter - NetworkName (Get-VirtualSwitch-distributed - name MyDVSwitch |) Get - VirtualPortGroup - name 'virtual machines'). Name
-
PowerShell syntax to check if a virtual machine is
I wrote a Powershell script that prompts the user to a VM host name and stores the value in the variable '$desktop '. Subsequently the VM is powered via the command get - vm that is (get-vm-name "$desktop")... However, if the host name is not a powershell error is displayed and the script is abandoned.
I want to ask is if there is a query method VirtualCenter to verify if the virtual machine host name exists, before issuing the command get - vm. Can someone help with the proper syntax?
Thank you
could be a way to do this:
$Exists = get-vm -name $desktop -ErrorAction SilentlyContinue If ($Exists){ Write "VM is there" } Else { Write "VM not there" }
If you found this information useful, please consider the allocation of points for correct or helpful.
Alan Renouf
-
Download of Virtual Machine Manager of console.
Hello
I installed the evaluation for Service Center Virtual Machine Manager. http://www.Microsoft.com/en-US/Download/details.aspx?ID=40843
I got the operating system and managed to connect my Hyper-V hosts. However, I'm trying to get Virtual Machine Manager console download so that I can connect from another system to test the operational aspects without having to be located on the server.
Can someone help us locate the download so I can install it locally.
Hello Stephen,
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
http://social.technet.Microsoft.com/forums/SystemCenter/en-us/home?category=VirtualMachineManager
Thank you
-
Windows XP mode virtual machine does not start after the upgrade to Windows 10
Hello
After the upgrade to Windows 7 Pro for Windows 10 Pro, my virtual Windows XP machine (which was created from the "XP" mode in Windows 7) no longer starts.
It shows:
This system is not allowed to run "Windows XP Mode". Now, the virtual machine will be turned off.
How can I activate the Windows XP Mode in Windows 10 Pro? I mean, I have not lost my right to run Windows XP Mode, just because I've upgraded to Windows 10, right?
VMware Workstation 12.1
Hello
How can I activate the Windows XP Mode in Windows 10 Pro? I mean, I have not lost my right to run Windows XP Mode, just because I've upgraded to Windows 10, right?
I fear that the statement is pretty much on the mark.
Microsoft caught only supported XP Mode in Windows 7, it has been since Windows 8.
See also:
https://support.Microsoft.com/en-us/KB/2724115
You might be able to extract the folder integer vhd it and import it in VMware Workstation as a separate virtual machine. In the end, 'XP Mode' just was running a virtual machine in your Windows 7 after all.
--
Wil
-
WAIT % - % IDLE, what is the average for a virtual machine?
I did some research on performance of VM problems and worked with the media to see that there is maybe a bottle neck IO that occur with a virtual VMware machine I have performance problems on. The technician found that the WAITING % - % IDLE on average for this virtual machine is around 200%. The tech said it was abnormally high. I forgot to ask her what was normal but wanted to put a post to see if some people out there know what they are on average. What is an average number of see? I have the system done nothing right now and I see 579% waiting and 372% IDLE. The technology has been able to confirm that no IO queue was occurring in the VMkernel or on the HBA controller.
Some average % positions would be useful. Thank you.
gdewulf18480 wrote:
Supposibly the amount of time in a State of waiting for I/O is the WAIT - IDLE % difference. I was wondering if anyone had the numbers for this feeling. Is there anyone with some of them?
Q: How will I know the VCPU world waiting for I/O events?
A: WAIT - % IDLE % can give you an estimate on how much time processor is spent waiting for I/O events. It is an estimate only, because the world wait perhaps for other than the i/o resources. Note that we should do it only for the worlds of the WWW, not the other kind of worlds. Because the VMM worlds represent the best guest behavior. For the disk i/o, another alternative is to read the disk latency stats that we explain in the drive section.
WAIT % by itself cannot be used, you must develop and examine the individual vCPU % EXPECTATION values and subtract their idle time. You can't do it on the initial view of a single line by VM CPU in esxtop. If technology that you mentioned did not explain it, he doesn't know what it takes.
I have lots of virtual machines that are never less than 300% when I wait - % idle and I have no problems.
It is an example, I caught NimSoft server:
DHSNMS1 100 100 5 192.63 193,80 0.24 0.03 291,44 1.04
%EST USED (s) 192 - in other words, almost two processors are used 100%
The %Idle is 1.04% WAIT 291.44 - according to the calculation of waiting idle, I have a super serious problems of e/s past But this isn't the case, and expanding, I can see that.
5665 vmware-vmx 100 1 0.09 0.11 100.00 0.00 0.00 0.01
5667 100 vmassistant.566 1 0.62 0.65 99,63 0.00 0.00 0.00
5703 100 mks:DHSNMS1 1 0.01 0.01-100.00 0.00 0.00 0.00
5704 vcpu 100 - 0:DHSNMS1 1 32,35 32.88 67,28 0.28 0.11 67,14
5705 vcpu 100 - 1:DHSNMS1 1 31,58 32.05 68.11 0.00 67.85 0.12
So the changed values unfortunately because of ESXTOP bike when you develop... which is annoying, but anyway. In this you see % waiting is 67 and 68 with another respectively being 3 to 100% (which is normal) and the idle being %, 0, 0, 0, 67 and 67.8. Doing the calculation on the processors shows a wait - slowed virtually 0 - or very little IO wait past with processors. But if you add up all the expectations of % and % is idling, you have 434ish, and the 134ish and do the calculation is the difference of 300 - which is the 3 who are always 100%.
So there is no way we can answer your question, we can only help you to understand how the values should be interpreted.
Waiting for i/o States almost always go on the disc anyway, it is unlikely, therefore, the network or the user entered, looking at the stats of disc ESXTOP is a much better way to determine if there is a problem of e/s.
-
How do you exit name of Virtual Machine of ' Get - VM | Get-AdvancedSetting' command?
Hello, I have a question which is hopefully enough simple to answer.
I'm having this problem explained in KB 2078352 and you want a list of VMs affected before hotfixing them, to see if it helped with our problem or not.
Sample line:Get - vm | Get-AdvancedSetting - name tools.deployPkg.fileName
Name value Type Description
---- ----- ---- -----------
tools.deployPkg.f... imc1D01.tmp VM
tools.deployPkg.f... imc937E.tmp VM
tools.deployPkg.f... imc32EE.tmp VM
tools.deployPkg.f... imc6030.tmp VM
This shows only the value of the file names, but not the names of virtual machine. So I was just wondering how I can get an output of name of virtual machine with this information?
Thanks in advance.
Try adding a Format-Table may
Get - VM | Get-AdvancedSetting |
Select @{N = "VM"; E={$_. @entity.name}}, Name, Value | Format-Table - AutoSize -
I don't know if this is the right place to post this question, I develop software to support VMWare PCoIP and need to know how to get the host name of the physical machine (which manages the virtual machine and View Client) within a virtual machine before the user logs in Windows of the virtual machine.
I understand there are two ways to read the host name, via the HKEY_CURRENT_USER\Volatile Environment registry and environment variables, but they are available once the user is connected. I need info before the user connects.
Is there a VMware API that can be called or asked the host name?
Thank you.
Not on the broker, but there are the startup scripts to log on to the computer virtual itself: http://pubs.vmware.com/view-52/topic/com.vmware.view.integration.doc/view_integration_startsession_script.9.2.html
Note that these executed when a virtual desktop computer allocated connection, not to the point that the client connects - it is possible for the customer to not complete the connection (crash, cancel, network failure) and so any what solution you design must handle this.
Mike
-
Help to get a list of virtual machines with switch network and name
I'm trying to get a simple list of virtual machines on a single host and include their name and networkname.
When I run this Get - vm | where {$_.} $host.name - eq "ESX.local"}, I get the virtual machines with their name. When I run this Get-networkadapter - vm Get - vm | where {$_.} $host.name - eq "ESX.local"} I download news network with the name of the network, which is what im after. " I want to combine these 2 commands and get vm name and network name in a csv. The network name is the Group of ports, the VM is affected change settings for example, it could be vlan10 or what you named your group of ports in the switch DV. I've attached a screenshot of the orders successfully.
Hello, brisketx-
You could do a little more efficiently by getting first the VMHost (s) that are of interest, then get their virtual machines and then using a computed property for the names of network for virtual machines. As:
Get-VMHost esx.local | Get-VM | Select-Object Name, @{n="NetworkName"; e={(Get-NetworkAdapter -VM $_ | %{$_.NetworkName}) -join ","}}
You can then, of course, lead to Export-Csv to write the data to a CSV file. How does do for you?
Maybe you are looking for
-
Is it supposed to autofill authentication information for the site specified on any Apple device?
-
New HP f010na, try to connect to Samsung tv with HDMI. The laptop can detect the screen, but TV shows the message 'mode not supported' FRO the HDMI connection. Anyone got any ideas? Thank you very much.
-
I am using data socket server to send and receive data from my camera (a wave front sensor) on the same computer. The data I received is a variant, and I need to convert the variant type to another type of data that I can use in Labview for the calcu
-
How to restore my acer aspire m1100 to its factory settings without the disc?
I need to restore my computer to its factory settings just clear everything out of it, but I don't have disks or remember the administrator password.
-
Epson Stylus Photo RX620 does not work with win 7
Epson Stylus Photo RX620 will not print driver installed after the upgrade to Vista. / Scanner works fine.