VDM - insufficient privilege on the vCenter Server

Similar Questions

• vCenter install fails when you try to install the vcenter Server to the node of the PSC in HA mode

  Hi all

  We have two controllers on duty platform build in HA mode. We are trying to install the vCenter server and we get the error message below.

  VCSCAValidateRemoteSSO: Unable to retrieve the remote SSO version: 12029

  2016-03-30 17:07:16.656 + 11:00 | vcsInstUtil-2656758 | I: PitCA_MessageBox: Displays the message: "Setup VMware vCenter Server could not verify that the distance vCenter Single Sign-On Server is version 6.0.0 or later. Check if the Server Single Sign-On remote vCenter is accessible and is version 6.0.0 or later. »

  Has anyone in the community runs vcenter server 6 HA with PSC inspectors sitting behind the f5 load balancer? Please share your thoughts if you have seen a similar problem.

  Thank you.

  Hi all

  We are able to go beyond the question of the installation. We did the capture of packets on both ends and discover that the reset was issued the installer by the licensing vCenter service running on the PSC.

  We have also created firewall rules more 18 altogether since the server vcenter for our f5 load balancing program, then 6 VIP of the F5 on the two controllers on duty Platform.

  I hope this helps other people who sought to install PSC in HA mode.

• Cannot connect to the vcenter until 10 minutes after the vcenter server computer starts

  I get the unable to connect to remote server message in vsphere client when I try to connect the server vcenter. However if I wait more than 10 minutes, I can properly connect to the vcenter server.

  Is there something wrong with it?

  And I wonder if the competent services to process the requests of connection on the vcenter server are not started immediately from the start?

  Where is installed your database? On the same box of vCenter server? If so, change the other boot option that delayed may not work because your vCenter will try to start before the database is online.

• Locking ESXi 4.1 mode access confirmation no access to the vCenter Server

  Hello

  ESXi 4.1.  I see options in conflict with access to a crowd that had lockdown normal mode activated via a server vCenter VM on a host in the cluster.  The vCenter server that sits on one of the hosts in the cluster lockeddown then became inaccessible or unresponsive connectivity wise.  So no connectivity between vCenter VM or VM vCenter and hosts.  Is someone can confirm if you can connect to this host lockedown by DCUI with root and disable lockdown configuration to allow the vSphere client to then connect to the host with root and troubleshoot the server vCenter VM?

  I read in some messages that this is only possible if the vCenter VM is in place and the communication to the host.  I also read that it is possible no matter what the State of the vCenter server once Total lockdown (disabling DCUI) is not enabled.

  I have this reference of the 'The new lock in ESXi 4.1 Mode' blog http://blogs.vmware.com/vsphere/2010/09/the-new-lockdown-mode-in-esxi-41.html

  "With active locking Mode, the only direct access to the host that remains open is through the DCUI. This allows to perform administrative tasks limited outside vCenter Server, such as restarting the management agents and the display of the log files. In addition, you can also disable Mode of Lockdown since the DCUI. This can be useful if vCenter Server is down or unavailable, and you want to return to a direct management of the host. Normally, without locking Mode, any user to the Administrator role can open a session in the DCUI.  However, in lock Mode, the root password is necessary; no other user can connect.

  Can anyone confirm.

  Any other person who may not be sure these questions, I can confirm that with root credentials, you can connect to the host directly and disable the lock mode regardless of the availability of vCenter.  Only if the Total lock mode turned on, or should I say DCUI is disabled, then you have no choice but to go through vCenter or reinstall and reconfigure the network.  VM would be always available if local or have to be reassembled and re inventoried etc.

• Cannot start the vCenter Server Service

  Cannot start the vCenter Server Service. To get this message to control the attached screenshot

  2013-09 - 03T 21: 34:18.800 + 05:30 [info 03612 'utilvpxdVdb'] [VpxdVdb::SetDBType] connect to DSN: VMware vCenter with username

  2013-09 - 03T 21: 34:18.800 + 05:30 [03612 error 'utilvpxdVdb'] [VpxdVdb::SetDBType]: database error: ODBC error: (IM002) - data [Microsoft] [ODBC Driver Manager] source name not found and no default driver specified

  2013-09 - 03T 21: 34:18.800 + 05:30 [03612 "Default" error] error obtaining configuration information from the database

  This looks like a problem in the registry for the part of the database or a correctly configured system DSN.

• If the vcenter server is what will be the impact?

  Dear team,

  If the vcenter server is what will be the impact? Please provide us with feedback on the same.

  concerning

  Mr. VMware

  Even if the DRS will not work if your CV is failure

• Disconnect the vCenter Server host machine

  I get error message after converting physical machine Desktop ESXi 5 using VMware Converter Standalone 5.0 utility whenever I deleted the host of the vCenter Server computer.

  This utility is installed on the desktop computer physics but prompt error on the screen "System Destination of"VMware Converter utility.

  Error.

  "The creation of host resource access is limited to the server"130.0.34.210"who manages the host. Use the destination administration server.

  You can help.

  Know not question, http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2012310

  Use vCenter server as a destination and try

• The vCenter server's FULL domain name.

  People,

  Using vSphere SDK Web services, is it possible to get the domain name FULL of the vCenter server that I have connected to? For example, foo - test.domain.com is the name of a field FULL of my RESUME, but I can connect to the Victoria Cross with SDK giving the name as foo-test. Once connected, is their any property by which I can get the FQDN of my CV, IE like foo - test.domain.com.

  Help in this regard is highly appreciated.

  Many thanks in advance,

  -Mani.

  (1) this property reflects maybe just how the guestOS has been set up if she had the FULL domain name or not, I'm not 100% sure but I always put my host names a FQDN. You can watch the underlying guestOS to see how it is set up compared to others which show the COMPLETE domain name

  (2) your original question was on vCenter FQDN, this property as mentioned is only for vCEnter and not for ESX (i). If you need to search for this information, you must watch the HostSystem that represents your ESX or ESXi host. You'll want to take a look at the HostDnsConfig property to find the short hostname under the host name and the domain under the domain name and that will provide COMPLETE domain name.

  I think the best way to interrogate this information actually uses your DNS infrastructure, it is what it is. Looks like not all your environments are configured using domain name FULL which in my books, is not a best practice. If this is the case, what data are only as good as the original configuration in order to make virtual infrastructure out of the image and simply use DNS to query for it. It is trivial to extract the IP addresses of your vCenter and the host ESX (i), so you can use it as a base to make your look up.

  I also recommend to take a look at the API reference documentation, it is the best place to find this information and using the search feature is also very useful to fine-tune the properties that interest you - http://www.vmware.com/support/developer/vc-sdk/visdk41pubs/ApiReference/index.html

  I hope this makes sense

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware VCP3, 4

  VMware VCAP-DCA4

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Can the vcenter server that an ESX host is connected to determine through query of the esx host cmd line?

  Can the vcenter server that an ESX host is connected to determine through query of the esx host cmd line?

  All points will be awarded. Thxs.

  Look in

  /etc/opt/vmware/vpxa/vpxa.cfg
  

  you will see that the IP VCMS listed something like

  1.1.1.1
  

• Error 25003. Installation failed to create the repository of the vCenter server.

  Hello

  I try to install vCenter Server 4.0. When the Installer tries to Creator repository an error pops up:

  Error 25003. Installation failed to create the repository of the vCenter server.

  I click OK and the installation of double-dipping.

  The last records in the Setup log are:

  Found "C:\Program Files\VMware\Infrastructure\VirtualCenter Server\vpxd.exe".

  Run as user logon administrator

  Found "C:\Program Files\VMware\Infrastructure\VirtualCenter Server\vpxd.exe".

  3221225477 returned by process

  ERROR: Failed to create the repository of VirtualCenter

  Displaying the Error 25003

  Description of our environment:

  • VCenter service runs under the SYSTEM account.

  • Autonomous mode eval version.

  • All ports are standard.

  • Using SQL2005 Express on the installation media.

  • I downloaded the trial version.

  • The server is VM on ESX with SP2 of Win 2003 x 86 CZE Standard Edition

  • The server is not in AD

  • Space 7.5 GB free disk

  I also tried to create the manully database but no luck.

  Thanks for the tips.

  After Installing Win XP SP3 ENG everything works OK... If the problem was really in the language version of the operating system...

• Changing the vCenter Server IP address

  I am trying to build a new vCenter environment, we are currently waiting on IP ports and patch our networks team but I would "If I can" start building the server vCenter for this environment, there will be a virtual server.

  We have a test environment in place for the moment that we have a shared iscsi data store that once the environment has been built, we can remove from the inventory and add to the new environment once completed.

  Can we see problems with IP addressing if I build the server with a temp IP then import into my new environment and then change the IP address?

  Yes,

  As you say you have a DB server as physics that won't change, even if you go for the production.

  So, all that you requested

  (1) SSO - for SSO db if you use existing DB for this tha'ts then fine, but if you plan to have additional server to DB, you will find difficulty

  (2) SQL server for VC - as you said that you use existing DB... It is very good

  (3) installing vcenter server and inventory... require you to have details of the SSO server. If you use the IP agreement for the installation of VC, there is difficulty, where you must uninstall VC and inventory services.

  Kind regards

  Sachin Bhardwaj

• When I installed the web client vsphere using vcenter server iso, encounted an error that the vcenter server signon administrateu use name and password is invalid

  VCenter server is version 5.1 and this server is a member of the working group.

  It comes to my administrator:

  

  So, I used ISO server vcenter and installed web client pulg-in vsphere, it prompted:

  I've used many ways, but failed.

  usernme:admin@system-domain,

  so, I do not know how to solve, and I only know this administrator password.

  I'm not vCenter sign the only to have another admin, please help.

  

  and another question: how install and configure the data via the vsphere 5.1 customer protection, vsphere isn't vsphere web client.

  You must provide credentials for the user admin@system-domain.

• Customer Web on esxi 5.5 hangs with loading... change the settings of the vcenter Server

  Hello

  Whenever I have use the Web Client (chrome or IE) and try to change the elements of vcenter server - manage - General Settings tab, like mail or time-out settings he is right there with loading in progress... appears.

  Statistics seems to be the only item that appears.  Any ideas?

  Thank you very much for your help!

  Dan

  Hello

  You can be hitting this problem: KB VMware: cannot access the Advanced Web Client vSphere vcenter server settings panel

• Insufficient privileges in the creation of MV that he select another schema table

  Hello

  Before asking this question, I checked with similar questions in the forum, but I don't see my situation, or I'd say I'm not clear on the solution.

  I got the privileges CREATE MATERIALIZED VIEW and CREATE ANY MATERIALIZED VIEW and I want to create a MV in my schema, but the MV selects data in another schema, and I had the privilege to choose this table. Here is my code

  Create VIEW MATERIALISEE CPY_GL_HANDS_OFF_DTL

  UPDATE THE BEGINNING WITH THE LARGEST (SYSDATE, TO_DATE ('2013.10.30.23.30.00 ',' YYYY.)) MM DD. HH24.MI. THE NEXT SS SYSDATE')) + (50519 /(24*60*60)) FULL

  ENABLES QUERY REWRITE

  SELECT

  *

  Of

  User_a.GL_HANDS_OFF_DTL@dblink;

  I run it, and I get ORA-01031: insufficient privileges. According to my research so far, the schema of the latter requires the CREATE TABLE privilege, even though she already had RESOURCES (which already includes the CREATE TABLE). Is this true? That's my problem. I only have read access to the table of the dblink, I can't control the privileges of this scheme. Advise please if this is the real problem?

  Thanks and greetings

  acquired through ROLE privileges do NOT apply in the PL/SQL name procedures

• Error of insufficient privileges on the creation of model running in a stored procedure

  Hello

  I get the error of insufficient privileges on execution of the DBMS_DATA_MINING. Script CREATE_MODEL in a stored procedure.

  If I run the same DBMS_DATA_MINING. Script CREATE_MODEL in an anonymous block with just begin... end;

  I am able to create a model successfully, but if I do the same thing after having stored the script in the stored procedure, it is throwing error of insufficient privileges.

  Scripts:

  BEGIN

  DBMS_DATA_MINING. () CREATE_MODEL

  Model_name = > < template name >

  mining_function = > dbms_data_mining. CLASSIFICATION,

  DATA_TABLE_NAME = > < data table name >

  CASE_ID_COLUMN_NAME = > < case ID >

  target_column_name = > < target column >

  SETTINGS_TABLE_NAME = > < settings table >

  DATA_SCHEMA_NAME = > < schema >

  SETTINGS_SCHEMA_NAME = > < schema >

  );

  END;

  The foregoing, works very well and created a model with the model given with success.

  But if I keep the above, in a stored procedure as - MINING_TESTING

  create or replace procedure MINING_TESTING as

  BEGIN

  DBMS_DATA_MINING. () CREATE_MODEL

  Model_name = > < template name >

  mining_function = > dbms_data_mining. CLASSIFICATION,

  DATA_TABLE_NAME = > < data table name >

  CASE_ID_COLUMN_NAME = > < case ID >

  target_column_name = > < target column >

  SETTINGS_TABLE_NAME = > < settings table >

  DATA_SCHEMA_NAME = > < schema >

  SETTINGS_SCHEMA_NAME = > < schema >

  );

  END;

  Compiles correctly.

  Enforcement - EXEC MINING_TESTING;

  Error message throw sufficient privileges.

  The error message complete below:

  Error report:

  ORA-01031: insufficient privileges

  ORA-06512: at "SYS." DBMS_DATA_MINING', line 1798

  ORA-06512: at "MIS_ORABI_ODM.CA_MINING_TESTER", line 3

  ORA-06512: at line 1

  01031 00000 - "insufficient privileges".

  * Cause: An attempt was made to change the user name or password

  without the privilege appropriate. This error also occurs if

  trying to install a database without the need for employment

  access privileges.

  When Trusted Oracle is configure in DBMS MAC, this error may occur

  If the user has been granted the privilege necessary for a higher label

  that the connection is active.

  * Action: Ask the database to perform the operation or grant administrator

  the required privileges.

  For users Trusted Oracle get this error, well that granted the

  the privilege that is suitable for the top label, ask the database

  administrator to grant the privilege to the appropriate label.

  Hello

  DataMiner UI grants privileges to a role, so if you're depending on these privileges you must proceed as follows when you create a stored procedure.

  Your stored procedure was created with the default authid which is definers. It will not use the privileges for the role. Solution is to create the stored procedure with authid current_user. This will pick up the privileges for the role. Another option is to apply the following subsidies directly to the user account:

  grant CREATE MINING MODEL

  CREATE THE TABLE,

  IN ORDER TO CREATE

  Example of stored procedure:

  create or replace procedure MINING_TESTING AUTHID CURRENT_USER as

  BEGIN

  DBMS_DATA_MINING. () CREATE_MODEL

  MODEL_NAME =>

  mining_function-online dbms_data_mining. CLASSIFICATION,

  DATA_TABLE_NAME =>

  CASE_ID_COLUMN_NAME =>

  target_column_name =>

  SETTINGS_TABLE_NAME =>

  DATA_SCHEMA_NAME =>

  SETTINGS_SCHEMA_NAME =>

  );

  END;

  Thank you, Mark