Locking ESXi 4.1 mode access confirmation no access to the vCenter Server

Similar Questions

• PIX 501 to allow access to the ftp server

  Hello

  We have a public ip address of the pix 501 and the other, I want to access the ftp server on the internal network from the outside. I tried to configure the PDM by a static nat, which translate to the address of the FTP to the public address, but then none of the stations networks could out - how can I configure it?

  I would also like to know what ports should I open on the acl for access to the ftp server.

  Thank you, daguech

  Yes, sorry... You must use the unique host for addresses command. The access list is applied to your external interface?

  for example, the command would be:

  Access-group acl_out in interface outside

  Also, can you connect to the local ftp server behind a firewall?

• access to the weblogic Server console problem

  Hi all

  We have a problem of access to the weblogic Server console page.

  We have fresh installed the Enterprise Manager Cloud control 12 c and we can access the MS pages without problems.

  When trying to connect to the weblogic Server (https:// < our_server >: 7101/console) with Firefox, IE11 or if the page is loading and loading without showing the login page.

  But when trying to connect to this address with a place (elinks) browser on the unix machine we'll see the first page immediately.

  Any ideas?

  Thank you

  Michael

  Hi all

  We solved the problem in another way: we opened the ports http access.

  Because issues were security settings in Internet Explorer.

  Thank you

  Michael

• vCenter install fails when you try to install the vcenter Server to the node of the PSC in HA mode

  Hi all

  We have two controllers on duty platform build in HA mode. We are trying to install the vCenter server and we get the error message below.

  VCSCAValidateRemoteSSO: Unable to retrieve the remote SSO version: 12029

  2016-03-30 17:07:16.656 + 11:00 | vcsInstUtil-2656758 | I: PitCA_MessageBox: Displays the message: "Setup VMware vCenter Server could not verify that the distance vCenter Single Sign-On Server is version 6.0.0 or later. Check if the Server Single Sign-On remote vCenter is accessible and is version 6.0.0 or later. »

  Has anyone in the community runs vcenter server 6 HA with PSC inspectors sitting behind the f5 load balancer? Please share your thoughts if you have seen a similar problem.

  Thank you.

  Hi all

  We are able to go beyond the question of the installation. We did the capture of packets on both ends and discover that the reset was issued the installer by the licensing vCenter service running on the PSC.

  We have also created firewall rules more 18 altogether since the server vcenter for our f5 load balancing program, then 6 VIP of the F5 on the two controllers on duty Platform.

  I hope this helps other people who sought to install PSC in HA mode.

• DreamWeaver - has access to the customer server languages and scripts?

  DreamWeaver - has access to the customer server languages and scripts?

  Thanks to anyone who responds to this in advance.

  If the access you want to say, "can I write a JavaScript or PHP with Dreamweaver code?  Yes.

  If you mean something else, please provide details.

  Nancy O.

• ESXi 5.5 - Direct access to the local logical unit number

  I have a 5.5 stand-alone ESXi server.

  It has 2 local SAS controllers

  Controller 1 (HP Smart Array P410): data bank single RAID 10 with two VM's local logic unit number

  Controller 2 (HP Smart Array P812): only RAID 6 LUNS nothing on it yet...

  My question is that I need one of the virtual machine to access that LUN. Is it possible to give direct access to the VM to the controller and/or the unit number logic rather than create a vmdk and massive data store?

  If it is I know Flash would not work on these data, but that really doesn't matter in this case.

  Thank you

  Kenny

  Hi Kenny, and welcome to the communities,

  There is an article dealing with your situation KB: http://kb.vmware.com/kb/1017530

  Concerning

  Tim

• Ripping a 4.1 host in a new 5.5 Cluster WITHOUT access 4.1 vCenter Server

  I have a client who has his 2 4.1 vSphere hosts in a cluster of vCenter 4.1 which is NOT under its control or access. vCenter server access is with a 3rd party that he is nervous on his account supported by a new provider. I'm looking for the safest method (preferable without interruption) to import these 2 hosts into a whole new vSphere 5.5 cluster with 2 new hosts and vCenter 5.5 server. He has access to individual hosts via the vSphere Client as well as its local based NAS storage where the virtual machine of the resident. The end result is vMotion and Storage vMotion, virtual machine on the new guests and new storage without interruption then remove the old hosts.

  This is possible without any downtime of the virtual machine. However, as you deploy new fresh vCenter again, you will need to reconfigure settings HA/DRS. Also, since you have no control over the old vCenter, given old vCenter performance you can't as well. If you don't care about performance data, you're good to go.

  Here's how you can make this migration:

  1. deploy the new vCenter: for your condition: vCenter device will work just fine: reference:http://www.virten.net/2013/09/vmware-vcenter-server-appliance-5-5-vcsa-limitations/

  2. create the cluster on new vCenter, set up the same.  first add your new ESXi 5.5 clustered host. Make sure that the shared on the old host ESXi storage is visible on the new host as well. If it is not possible, you can run without shared as well storage vMotion. Reference:VMware vSphere 5.1

  3. now you can add your old webhost to the new cluster, make sure that vMotion requirement are already configured:

  Documentation Centre of vSphere 5.5

  4. Add your old host to new cluster. Once you add these ESXi host in new vCenter, both will be disconnected automatically old vCenter. If your host processors are different, you must enable EVC: make sure you understand impact of the VCA, the same configuration.

  Reference: VMware vSphere 5.1

  VMware KB: Enhanced vMotion compatibility (EVC) support processor

  VMware KB: EVC and CPU compatibility FAQ

  VMware KB: Activation CVS on a cluster when vCenter Server is running in a virtual machine

  5. you can migrate your old Web host VMs to new host, once the migration is complete, you can keep your old Web host in maintenance mode and remove the same.

• Newbie question on access to the RADIUS server

  I've worked before on RADIUS servers running on Windows but not on Unix. I'm new to an environment without any documentation and I make sure I have access to the GANYMEDE/ACS config.

  I go to my config switch and I see that ' 10.0.0.1 radius-server.

  Then I ssh into ' 10.0.0.1' and I see the below after "method.

  From the bottom, you have an idea on how to access the configuration of the ACS in case I need to change any setting it? I tried http://10.0.0.1 but it does not work.

  -bash-3, $00 ls
  bin features core net sbin TT_DB
  Start the etc. opt system usr lib
  export of CDROM lost + found tftpboot var platform
  dev House Dem proc tmp flight-bash-3. $00 ls
  bin features core net sbin TT_DB
  Start the etc. opt system usr lib
  export of CDROM lost + found tftpboot var platform
  dev House Dem proc tmp flight

  Try http://10.0.0.1:2002 for ACS listening on port default 2002.

  Pete

• blocking direct access to the oracle server

  Dear Sir

  One of our condition of pci - dss to stop direct access to the db. One solution I know:

  TCP.validnode_checking = YES

  TCP.invited_nodes = (192.168.1.91, visionhost.solutionbeacon.com)

  But this option will allow the IP address of the node invited with sqlplus using tns names also. Have any have experience to solve the problem of ending up with pci - dss?

  In which paragraph of the PCI - DSS doc that makes you think that there is a problem? I work with version 3.0 (November 2013) and I can't find anything like that. For example, paragraph 8.7 c, "review of database access control settings and application of database to verify configuration settings that the user access directly to the or queries of databases are limited to database administrators" does not say that the DBA is not able to connect to the application server. And all the stuff of firewall in requirement 1 close the access to the network and between networks, not within the network.

  Are you sure that you have a problem? There is no interest to 'fix' something that doesn't have a reference in the doc.

• Access to the web server that is running in VMWare Fusion (Windows 7)

  Hello:

  I have an old asp application running on the Windows IIS7 server running in VMWare Fusion on my Macbook. It works very well if access http://localhost side windows in Fusion.  How do you get it from other computers on the network? I usually not done anything with access to the network on the windows side. I tried to use the same IP Mac address is visible, which is 192.168.0.xxx, that does not work. On the Windows operating system side it has the IP address 192.168.216.xxx, I think it's just a fake to connect with the Macbook side of things.

  What URL to use? VMWare Fusion additional requirements?

  Thank you!

  If you value Network Adapter to the Virtual Machine Bridged then use either DHCP or assign a proper IP address provision that is beyond the scope of the address Pool IP DHCP from the router to the network card in the Windows Virtual Machine, you can reach then the virtual machine just like any other physical local network Machine by using its IP address example: http://192.168.0.10

  If you cannot use Bridged so you use NAT with Port Forwarding.  To enable Port Forwarding on VMnet8, change you the [incomingtcp] section in Library/Preferences/VMware Fusion/vmnet8/nat.conf by the example shown in the config file.  Do it with the stop the Virtual Machine, not suspended, and VMware Fusion closed.

• Customer Web on esxi 5.5 hangs with loading... change the settings of the vcenter Server

  Hello

  Whenever I have use the Web Client (chrome or IE) and try to change the elements of vcenter server - manage - General Settings tab, like mail or time-out settings he is right there with loading in progress... appears.

  Statistics seems to be the only item that appears.  Any ideas?

  Thank you very much for your help!

  Dan

  Hello

  You can be hitting this problem: KB VMware: cannot access the Advanced Web Client vSphere vcenter server settings panel

• Blocks access to the http server homepage

  I can't seem to find how to block (or redirect away from) the Web Server home page.
  For example:
  A user accesses http://servername:7777 / pls/apex/f? p = 101:1 (a valid url)
  Then they come back to the end of the url to access http://servername:7777
  It's 'Welcome to the Oracle HTTP Server' page of my web server. How to block (or redirect away from) this page?
  I think it should be easy, but I can not find directions on how to do...
  Thank you

  You can change the index.htm file in the htdocs OHS_HOME to do a redirection of metatag like this:

  
  
  

  Or you could put a rule in the httpd.conf file.

  See: http://en.wikipedia.org/wiki/URL_redirection

  Thank you

• VM Fusion 4 - access to the Web server

  Is it possible to put in place the VM Fusion 4 with a server/service on a Windows XP image (or 7) web.

  I saw suggestions on how I can access web server/service of the Mac, but not from the wider network.

  Thanks in advance.

  Lee.

  Do you have properly configured the host firewall and firewalls or for test purposes temporarily disabled all firewall?

  I do not see the status of the firewall host, but by default it is and would block incoming requests.

  Firewall host is defined as follows:

  Firewall:

  Firewall settings:

  Mode: Restrict incoming connections for specific services and applications
  Applications:
  QLEnableXRayFolders: allow all connections
  com.getdropbox.Dropbox: allow all connections
  com Skype.Skype: allow all connections
  The firewall logging: Yes
  Stealth mode: No.

  That would certainly block communications in this scenario.

• access to the domain server functions do not

  When I'm in my area I want to access my server.

  However its server.mydomain.com host name does not work.

  In Terminal Server hostname gives server.mydomain.com

  nslookup server.mydomain.com

  give the right IP

  Nslookup 10.0.xxx.xx... the IP number reverses to the server.mydomain.com.

  But if I put in afp://server.mydomain.com

  It does not work.

  I put in the number of ip...

  It worries me because is not the expected behavior.

  WHY?

  Stone

  Maybe you're ssl certs are not certified. You can purchase one from a certification authority or be your own and use openssl and many other methods.

  You see that the internet wants to be safe, so they want to make sure that someone will never fake like your domain name. This means CERT must be used to show another device that you are who you claim to be.

• ESXi 5.1 status host HA is showing that the election

  Hello

  I have a node 4 ESXi 5.1 HA and DRS Cluster. Recently, I replaced all these hosts SSL certificates and prior to this activity, I had turned off the AP. Now, after replacing the hosts SSL certificates - when I am allowing the PA on the cluster, 1 single ESXi host is projection status of HA - ' Running (Master) and rest all three hosts are 'Election' HA status.»

  Tried to re - install the HA agent on the host, but issue still persists. Also tried the re - configure the AP on hosts ESXi, deactivation and activation of AP on the cluster, but no luck.

  Can someone help me for that to be resolved.

  Thank you

  KC

  Hi all

  Thanks for all your response.

  Problem is solved without the help of the HostReconnect.pl script. I followed the steps below and now all ESXi hosts demonstrate normal HA status.

  (1) put the host in Maintenance Mode. Unplug and remove from the vCenter server.

  (2) restart the management through DCUI Agent.

  (3) uninstalled the HA agent using the command line.

  (4) add the host to the Cluster.

  5) out of Maintenance Mode.

  By following these steps - correctly configured the AP on all four ESXi hosts. Now a single host is show as master and rest three hosts are displayed as slaves HA status.

  Kind regards

  KC