Vectors and vectors and storage

Similar Questions

• Backup and storage to iCloud

  Why make backups if you use iCloud storage?

  This should explain it further - iCloud: overview of backup and storage iCloud

• What is the date of GA of Foglight for Enterprise Virtualization v. 7.0 and Storage Manager 3.0

  Hello

  I was wondering what should Foglight for Enterprise Virtualization v. 7.0 and Storage Manager 3.0 available for download

  Thank you

  Eli

  Foglight for virtualization 7.0 is now available on Supportlink here. Storage Management 3.0 is available here.

• County of vMotion and Storage vMotion over the last 24 hours

  I am under the below a line to count the number of vMotion and Storage vMotion, which happened in the past 24 hours in the middle and it not give me the required result, but when I combine them in the script that I use to collect additional information, it's just returns 0 (zero) as the County.

  Rely on Storage vMotion and vMotion

  Get-VIEvent - MaxSamples ([int]: MaxValue)-start (Get-Date). AddDays(-1) |

  Where {$_.} GetType(). {Name - eq "TaskEvent" - and $_.Info.DescriptionId - eq "VirtualMachine.relocate" - or $_.Info.DescriptionId - eq "StorageResourceManager.applyRecommendation"} |

  Measure-object | Select-Object - ExpandProperty County

  Get-VIEvent - MaxSamples ([int]: MaxValue)-start (Get-Date). AddDays(-1) |

  Where {$_.} GetType(). {Name - eq "TaskEvent" - and $_.Info.DescriptionId - eq "VirtualMachine.migrate"} |

  Measure-object | Select-Object - ExpandProperty County

  Combined script

  Get-Cluster |

  {ForEach-Object

  $Cluster = $_

  $VMHost = $Cluster | Get-VMHost

  $CpuUsageMhz = $VMHost | Measure-object-property CpuUsageMhz-sum | Select-Object - ExpandProperty sum

  $CpuTotalMhz = $VMHost | Measure-object-property CpuTotalMhz-sum | Select-Object - ExpandProperty sum

  $MemoryUsageGB = $VMHost | Measure-object-property MemoryUsageGB-sum | Select-Object - ExpandProperty sum

  $MemoryTotalGB = $VMHost | Measure-object-property MemoryTotalGB-sum | Select-Object - ExpandProperty sum

  $Cluster | Select-Object - property @{Name = "ClusterName"; Expression = {$_.} Name}},

  @{Name = 'vSphere HA'; Expression = {$_.} HAEnabled}},

  @{Name = 'Analysis HA-Host'; Expression = {$_.} ExtensionData.Configuration.DasConfig.HostMonitoring}},

  @{Name = 'HA-Failover capacity'; Expression = {$_.} ExtensionData.Summary.CurrentFailoverLevel}},

  @{Name = 'HA-Admission Control'; Expression = {$_.} HAAdmissionControlEnabled}},

  @{Name = 'Configuration problem'; Expression = {[string]: join (",", ($_.))} ExtensionData.ConfigIssue | {{(Select-ExpandProperty FullFormattedMessage))}}.

  @{Name = 'vSphere DRS'; Expression = {$_.} DrsEnabled}},

  @{Name = "The DRS automation level"; Expression = {$_.} DrsAutomationLevel}},

  @{Name = "Use of the CPU (Mhz)"; Expression is {$CpuUsageMhz}},

  @{Name = "Cpu (Mhz) Total"; Expression is {$CpuTotalMhz}},

  @{Name = 'Cpu use (%) » ; {Expression = {[Math]: Round(100*$CpuUsageMhz/$CpuTotalMhz)}},

  @{Name = "use (GB) of memory"; Expression is {$MemoryUsageGB}},

  @{Name = "Total (GB) of memory"; Expression is {$MemoryTotalGB}},

  @{Name = 'use of memory (%) » ; {Expression = {[Math]: Round(100*$MemoryUsageGB/$MemoryTotalGB)}},

  @{Name = 'VMS NB'; Expression = {$_ |} Get - VM | Measure-object | {{Select-Object - ExpandProperty County}},

  @{Name = 'Virtual machines without VMXNET3 NB'; Expression = {$_ |} Get - VM | Get-NetworkAdapter | WHERE-object {$_.} Type - not "Vmxnet3"} | Measure-object | {{Select-Object - ExpandProperty County}},

  @{Name = 'VMotions NB'; Expression = {$_ |} Get-VIEvent - MaxSamples ([int]: MaxValue)-start (Get-Date). AddDays(-1) | Where {$_.} GetType(). {Name - eq "TaskEvent" - and $_.Info.DescriptionId - eq "VirtualMachine.migrate"} | Measure-object | {{Select-Object - ExpandProperty County}},

  @{Name = 'SvMotions NB'; Expression = {$_ |} Get-VIEvent - MaxSamples ([int]: MaxValue)-start (Get-Date). AddDays(-1) | Where {$_.} GetType(). {Name - eq "TaskEvent" - and $_.Info.DescriptionId - eq "VirtualMachine.relocate" - or $_.Info.DescriptionId - eq "StorageResourceManager.applyRecommendation"} | Measure-object | {{Select-Object - ExpandProperty County}}

  } |

  Export-Csv "C:\Script\Clusters.csv" - NoTypeInformation - UseCulture

  Could you please someone check the script above and let me know if there is something wrong

  Thank you!!

  But wait a minute, you mean that the "Num vMotions" and "Num of SvMotions" properties have a value of 0?

  This is normal, since you ask for events for the entity of the group, while you should do it for all the virtual machines in the cluster.

  Try the attached version.

• ESXi installation process and storage CF

  Hi all

  It's been a while since I worked with the CF based storage so forgive me if this is a silly question!

  I remember at the time of ESX 3.5 when a host is created, it is strongly recommended that you unplug your HBA as the installer ESX 3.5 was inclined to wipe your FC LUNS during installation.

  Is this always the case? If I add a bright new ESX5.1 host in a cluster existing I have to disconnect from the connected FC SAN for the generation?

  Thank you

  Chris

  No, during the installation of ESXi, it scans all the storage controller and storage/LUN connected to the server. Setup ESXi offer screen user input to select the storage that you want to install ESXi and installation takes place on the selected disk.

  If you are using a scripted installation, make sure that mention you the right VMHBA device in the KS file and remove the firstdisk option. For even if the device driver of the CF charged first by ESXi, KS file controller resumes the VMHBA right for installation.

• Bought Office Acrobat 11 DC Pro to my PC running Windows 7 - I have more than enough RAM and storage, but get the message: "this application cannot be installed on this operating system. The installation program will end now. Please refer to the minimum s

  Bought Office Acrobat 11 DC Pro to my PC running Windows 7 - I have more than enough RAM and storage, but get the message: "this application cannot be installed on this operating system. The installation program will end now. Please refer to the minimum requirements to... "Can't determine the location on the Adobe Web site to get answers. Any suggestions?

  I deleted an earlier version of Acrobat Pro from my computer. Still, I get the same message.

  Hi John,.

  Please specify if you have purchased DC Acrobat or Acrobat 11 or upgrade you to the latest patch for Acrobat 11, that is to say 11.0.11 so that we can help you accordingly.

  I wonder if you have checked your system requirements before you download Acrobat.

  I would also ask to share with you the screenshot of the error message with us.

  You could probably uninstall Acrobat using cleaning tool. Here is the link for the same thing.

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  If you were installing DC, check out the following link to download.

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html (classic)

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-DC-downloads.html (continued)

  Concerning

  Sukrit diallo

• Isolate the vMotion and storage traffic?

  We use ESXi 5.1 using two physical switches for management traffic and two physical switches for VM and storage vMotion traffic. We use a DVSwitch with VLANS separated for VMs (125), storage (126) and vMotion traffic (127). My question is really about the physical switch setting. I have installation of VLANs, 125, 126 and 127 on my main switch with each of them having a layer 3 interface. I think that only the network of the VM (vlan 125) needs a layer 3 interface. In other words, my VLAN storage and vMotion is not routable by removing the 3 layer interface.

  Does this sound correct?

  Another twist, I have a Juniper switch where all layer 3 interfaces are defined. It is connected to 4 switches in the rear of my IBM Bladecenter. Two of these switches are Cisco 1 GB switches that carry all traffic to the management through a vSwitch network. The other two switches are BNT 10 GB switches that carry traffic for Storage vMotion and VMs. Of course, it's a network connection, because it carries several VLANS.

  My only question now is should I eliminate interface layer 3 on my storage network located on one vlan separate

  Well, you need your storage system accessible on these IP addresses by the systems for the management of the other subnets or such? You already have all traffic from subnet inter between iSCSI and other networks? If this isn't the case, then there is no need to have routable iSCSI network.

  For the ESXi hosts themselves there is usually zero reason to have vmkernel iSCSI interfaces be routable since you already do management etc on another routable network (and responses of hosts would be sent there as well except if you define static routes custom).

• Should separate you network traffic and storage?

  To give some background, we use FCoE, and each server has 6 adapters. The way it was intended was 2 for network, storage 2 and 2 to the DMZ. The subject was brought on the use of network and storage 4 to increase the flow.

  Could someone point me to the best practices of the present or advice if they believe that it should be separate or combined?

  Thank you

  I always recommend using a disparate network for IP storage (or at least one VLAN unique), unless you have some really strong QoS that will ensure you packets of storage (as with something like a blade case). The problem is that storage is much more sensitive to latency as (most) network traffic, and contension could cause significant problems.

  http://blogs.VMware.com/Networking/2011/11/VDS-best-practices-.html

  IP storage traffic is via the ports of vmknic and this traffic varies with disk i/o requests. More data are transferred to configuration-to-end jumbo frame, with each Ethernet frame, reducing the number of images on the network. Plu framework reduced the load on the servers and targets and improves the performance of IP storage. Congested and low speed networks can cause latency issues that disrupt access to storage over IP. It is recommended to provide path at high speed for IP storage and avoid any congestion in the network infrastructure.

• I used REGEXP_REPLACE to remove Scott. is it possible to delete all information on Scott and storage simultaneously using REGEXP_REPLACE...?

  I used REGEXP_REPLACE to remove Scott. is it possible to delete all information on Scott and storage simultaneously using REGEXP_REPLACE...?

  
  

  Select REGEXP_REPLACE (dbms_metadata.get_ddl('TABLE','EMP'), '("Scott")', ", 1, 0, 'i') twice;

  
  

  result:

  CREATE TABLE 'EMP '.

  (SELECT 'EMPNO' NUMBER (4,0) NOT NULL,)

  'ENAME' VARCHAR2 (10),

  VARCHAR2 (9) "JOB."

  "MGR" NUMBER (4,0).

  "SAL" NUMBER (7.2).

  "DEPTNO" NUMBER (2.0)

  ) PCTFREE, PCTUSED, INITRANS 40 10 1 MAXTRANS 255 NOCOMPRESS SLAUGHTER

  TABLESPACE 'USERS '.

  
  

  I want to:

  
  

  CREATE TABLE 'EMP '.

  (SELECT 'EMPNO' NUMBER (4,0) NOT NULL,)

  'ENAME' VARCHAR2 (10),

  VARCHAR2 (9) "JOB."

  "MGR" NUMBER (4,0).

  "SAL" NUMBER (7.2).

  "DEPTNO" NUMBER (2.0)

  )

  Hello.

  In fact, it's a Japanese forum here.

  I'm sorry, English is not good for me...

  According to the reference,.

  DBMS_METADATA

  The description of the parameter called SEGMENT_ATTRIBUTES, it is written like this.

  > If TRUE , include clauses attributes segment in the DDL. If FALSE , omit them. Default value is TRUE .

  Before you SELECT it, it's OK if you run the following.

  exec DBMS_METADATA. SET_TRANSFORM_PARAM (DBMS_METADATA. False SESSION_TRANSFORM, 'SEGMENT_ATTRIBUTES',);

  I hope you find it informative.

• Hosts and storage of VDC.

  Hello.

  I'm trying the vCloud API v1.0 for details of a VCC of the vCloud Director. But I am struggling to find a way to bind the VCC with the host (physical machine) and storage it is associated. Can you get it someone please let me know if you know a way to find the host and the storage associated with a VCC?

  Thank you!

  Hello

  To get the relationship using vCloud API 1.0

  1. api/v1.0/admin/extension/providervdc/id - contains info on the hosts, data warehouses. the provider VDC also contains a link to get the references of vdc.

  2. api/v1.0/admin/providervdc/id/vdcReferences - that gives all the VCC references supported by this provider vdc.

  I hope this helps.

  With the help of vCloud API 1.5, query service contains all this information.

  Kind regards

  Rajesh Kamal.

• Random virtual machines after vMotion and Storage vMotion network loss

  Hi all -

  I have a couple of tickets open with VMware and our supplier of SAN, EqualLogic, on this issue.  Since the configuration of our production and DMZ clusters we noticed that the virtual machines will sometimes drop network connectivity after a successful vMotion and Storage vMotion.  Sometimes, although much less frequently, virtual machines also spontaneously lose network overnight.  What happened only a few times.  The strange thing is that the other guests on the VM host are fine - they lose any network.  Actually, I can do no more than 3 computers virtual host to another, and 2 of 3 can switch correctly, so that we lose the network.  The work around?  Simply 'disconnect' from the virtual NETWORK card 'reconnect' and the virtual machine will start the return packets.  I can also switch the VM troubled return to the host State and it will find the network.  I can it reboot and re - win network.  I can re - install the virtual card completely, and she re - win network.

  VMware has seen a lot of mistakes of SAN in our log files in order to update us our SAN firmware to the latest version.  That seems to have fixed that but we still have the issue.  Here are some of the specifications - all environments are virtually identical except for memory:

  Of PowerEdge R810

  NICs Broadcom 5709

  EqualLogic SAN running 5.0.5 F/W

  We use frames.  ESXi is fully patched.  I haven't seen a boss or not, it is only some guest operating system that loses the network, but we are a Windows environment.

  When a virtual machine loses the network, we can not:

  • Ping to it
    
  • Ping it
    
  • Ping him at the virtual machines on the same host or vSwitch
    
  • Ping outside our network
    
  • resolve DNS, etc..
    

  I followed some KBs VMware without success, including:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003839
  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & externalId = 1002811 (port security is not enabled)

  -All the VMware tools have been updated to the latest version correct and corresponds to the ESXi host
  -Connected to the service ESXi console, I cannot ping the VM problem by name of host or IP address, but I can ping do not affected by the issue of the OTHER virtual machines.  I can also pings the service console.
  -Connected to the troubled virtual machine itself, I cannot ping other virtual machines, I can't resolve host names, I cannot ping by IP.  The machine virtual CAN ping itself by IP, but not hostname.  I cannot ping other virtual computers on the same virtual switch or network by either IP or host name.  I can't ping the vSwitch network management.
  -All vSwitches are configured in the same way and the same.
  -Notify the switches is set to yes
  -There are a lot of available virtual ports
  -We tried the E1000 and VMXNET virtual cards with no difference.
  -All cards are configured to negotiate, but we tried to force individuals speeds as well as with no difference

  I appreciate your help.  I have problems getting anywhere on this issue with the sellers.

  wkucardinal wrote:

  Still having the issue...

  Sometimes, it might be useful to really check that all uplinks VMNIC for all VLAN does work them. Try this is to create a new portgroup on the vSwitch used by your virtual machines on the host of the first, put a test VM on the portgroup, then go into the NIC teaming policy from the new portgroup and select "Override switch command failover."

  Then down vmnic all except one in unused, then only a single VMNIC is active. Then set the portgroup VLAN to a production of VLAN and try to see if we could ping some expected from the different addresses. If it works, then move VMNIC work until unused and move up to another asset. Try again, and this for all the vmnic. If it works, then you have verified that the configuration of VLANS and other settings are correct on the physical switch in the face of this host ports.

  If several VLANs, repeat the process for all other productions VLAN. Then repeat on the other hosts.

  While that may take some time, occurs if everything is properly configured on the physical switches. When occurs a vMotion virtual machine gets a new "Port code" and is assigned to a new outgoing VMNIC. If there is an error of configuration on one or more physical ports that might seem random, but may still happen on VLAN x on y VMNIC. Given that Port ID policy you use indeed spread randomly VMs on the vmnic these problems may be difficult to diagnose. (Make a disconnection of the VM vNIC gives the virtual machine a new port-ID, which it will move to a new outgoing VMNIC, which might seem to solve the problem.)

• Collection of information HBA and storage

  Hello together.

  I'm looking for a script that collect for me some HBA information and storage. We use vSphere 4 U1 and need a Script that collect following information

  Name of Runtime

  Full device name

  Identifier of

  Capacity

  Name of the data store

  Political path

  State (active / standby)

  PWWN

  and maybe some information storage area as a vendor, Firmware Version, if that's possible.

  I found examples of may for some information, but not all together.

  Can someone help me because I'm not a God of script.

  Thank you

  Kind regards

  ron9999

  Hi Ron,

  I tried to do the script that you are looking for, but do not understand what you mean with "Name of the Runtime" and I do not know how to retrieve the version of the firmware. So I let these two. With the identifier did not know which one to choose, because there is more than one. If I put things in the wrong place maybe you can give an example of a production line with real data, you don't want to see it.

  Function Get-DatastoreByHba {
    param([string]$Hba)
  
    $Datastores = Get-Datastore | Get-View
    $Datastore = $Datastores | `
      ForEach-Object {$_.Info.Vmfs} | `
      ForEach-Object {
        $Vmfs = $_
        $Vmfs | `
        ForEach-Object {$_.Extent } | `
        Where-Object {$_.DiskName -eq $Hba} | `
        ForEach-Object {$Vmfs.Name}
      }
    Return $Datastore
  }
  
  $Datastores = Get-Datastore | Get-View
  Get-VMHost | ForEach-Object {
    $VMHost = $_
    $VMHostHBA = $VMost | Get-VMHostHba
    $VMHost | Get-ScsiLun | ForEach-Object {
      $ScsiLun = $_
      $ScsiLun | Get-ScsiLunPath | ForEach-Object {
        $ScsiLunPath = $_
        $HBA = $VMHostHBA | Where-Object { $_.Device -eq $ScsiLunPath.Name.Split(":")[0]}
        $wwn = $HBA.PortWorldWideName
        $wwnhex = "{0:x}" -f $wwn
        $Report = "" | Select-Object -Property VMHost,Device,Identifier,CapacityMB,Datastore,MultipathPolicy,State,PWWN,Vendor
        $Report.VMHost = $VMHost.Name
        $Report.Device = $ScsiLunPath.Name
        $Report.Identifier = $ScsiLunPath.ScsiLunID
        $Report.CapacityMB = $ScsiLun.CapacityMB
        $Report.Datastore = Get-DatastoreByHba -Hba $ScsiLunPath.Name
        $Report.MultipathPolicy = $ScsiLun.MultipathPolicy
        $Report.State = $ScsiLunPath.State
        $Report.PWWN = $wwnhex
        $Report.Vendor = $ScsiLun.Vendor
        $Report
      }
    }
  }
  

  The PWWN conversion code is borrowed from LucD.

  Because the forum software has problems with hooks, and contains the script, I am also attaching the script.

  Best regards, Robert

• Problem with the importation and storage of library

  I have sewing miss the logic in the import and storage of the photos in the library. This causes a situation that whenever I need a picture I need to go to C: and import it. My library is almost empty and I don't see how the images can be stored. In any case, this has created situations where I open the import window and I can see the pictures, but I can't access somehow? I get same messages telling me that there is that a dublicate somewhere, but where, remains a mystery. I am so set on logic in windows to manage and store files and which confuses me maybe? Is there a tutorial "how to import and store your images in Lightroom? Enlighten me about the logic of this.

  Thank you

  Lightroom is a database; not a file browser. A file Explorer "focuses on" your records, sees that the pictures are here and allows you to work with them. Lightroom does not. He knows only the photos that have been imported into Lightroom. Once the photo is imported into Lightroom, then Lightroom knows the location of the photo and it's metadata and you can perform tasks (such as editing on the photo). At no time does Lightroom contains your photo. At no time Lightroom stores your photo. But since it is not a file Explorer, if you move or rename or delete the photo outside of Lightroom, then Lightroom no longer knows where's the picture (it is not a file browser) and if the photo is reported as missing (it has a question mark icon) and you can no longer perform tasks on this photo.

  Therefore, once you import a photo in Lightroom, you must perform all the management of this photo of in Lightroom. This means do not move or rename or delete the photo in your operating system or another program. You will need to browse/search the photo in Lightroom, not your operating system. All the actions performed on the photo must be done in Lightroom.

  Why? A database allows you to organize in a way that is not possible (or possible but very difficult) to do in your operating system. The main tool of organization ensuring (in my opinion) by Lightroom's keywords. Keywords and other metadata (captions, titles, collections, etc.) give you the opportunity to organize in ways that folder organization cannot reach.

  In addition, Lightroom allows you to simplify your workflow (if you want). My workflow is very simple. In my workflow, there is no need to move photos from here to there, to reach the organization. A photo comes out a camera and is placed in a folder by default (by date of capture), and he never moves out of this folder again. Instead, I use the keywords and other metadata to enable me to quickly find my photos, and another advantage is that I don't no need to know the pictures are found in the folder. With 22000 photos, I just can't remember what they are stored in folders - it is a task that is impossible for me to do. However, I can find any photo quickly; for example, if the content of the photo is a skyscraper, I simply tell Lightroom to find all my photos that have the keyword "skyscraper" and Lightroom will find that almost instantly and I didn't even have to know which folder the file was in. It is difficult for me to imagine a simple workflow.

  Note: you can continue to use the files as a method of organization, you don't have to use keywords, but you must "respect the rules of Lightroom" and use Lightroom to move pictures from here to there, and you must use the methods of Lightroom to rename your photos; etc. And of course, if your organization only be made via the files and folders, you do not get profits of keywords and other metadata.

  Then, I suggest you do the following with your workflow:

  Import photos into Lightroom once and only once. After that, there are all the management of the pictures that have been imported into Lightroom. Photos should be assigned keywords as appropriate and enter captions, titles and other metadata. All the searching and browsing of photos that were imported should be made in Lightroom, preferably using keywords and other metadata.

  References:

  http://forums.Adobe.com/docs/doc-3682

  http://TV.Adobe.com/watch/getting-started-with-Adobe-Photoshop-Lightroom-5/Lightroom-5-IMP orting your images.

  http://TV.Adobe.com/watch/getting-started-with-Adobe-Photoshop-Lightroom-5/Lightroom-5-org anizing-your-pictures.

• Creation of names of users and storage space began with the numbers or _ $#.

  Hi all
  
  Could you please explain to me
  
  If the creation of users and storage names began with numbers or _ $# is fine. Are there any constraints or slandered oracle. ?
  
  
  Thanks in advance.
  Dev

  After watching a few google links, I want to sum-up rule for the design of Tablespace:

  1. always create tablespace locally managed (management of the measure).

  2. never create tablespace with hundreds of small data files to avoid a slower recovery.

  3. the types of segments that are used in the same way must be stored together.

  4. the system must be designed for the most common usage.

  5. the regions should be exceptions.

  6 feud among storage space should be kept to a minimum.

  7. the data dictionary must be isolated.

  8. always give a name to the tablespace; so it may be easy to know what contains this tablespace.

  9 http://webhelp.esri.com/arcgisdesktop/9.2/index.cfm?TopicName=Recommendations_to_minimize_disk_I/O_contention&anchor=iooracle

  10. never use quotation marks double tablespace name.

  11 create the tablespaces explicitly using CREATE TABLESPACE rather than implicitly by creating a table without specifying a tablespace name.

  12. create an a tablespace less as temporary for user types.

  13 specify the suffix ".dbf" for names of applications datafile, '.log' for log data file names.

  14. set the default storage parameters to take into account the size of the typical object.

  15 specify PCTINCREASE 0. Exceptions can only be made with the approval of the Central s/n.

  16 AUTOEXTEND must be enabled.

  17 MAXSIZE must be set.

  After posting the links to doc, I want to sum-up rule for the creation of the user:

  1. always follow "Requirements Minimum for passwords"
  http://docs.Oracle.com/CD/B28359_01/network.111/B28531/authentication.htm#CHDFDHAJ

  2. never use double quotes with username and passwords.

  3 assign a default Tablespace for the user.

  4 assign a Tablespace Quota for the user.

  5 avoid giving the ability for users to create objects in a table space, because the schema is the logical database for the user.

  6 enable auditing for many reasons.

  7 assign a temporary Tablespace for the user.

  8 identify the appropriate profile and role to the user.

  9. only letters, numbers and the underscore character are allowed in names. Although Oracle allows for $ and the #, they are not needed and may cause unexpected problems.

  10. all names are uppercase. Or at least unimportant in which case. Ignoring this rule usually leads to making reference to the tables and the columns very clumsy because all names must be in double quotes.

  11. the first character of the name must be a letter.

  12. keep meaningful names, but at the same time, do not use long_names_describing_every_single_detail_of_particular_object.

  Sources: https://www.cms.gov/DBAdmin/downloads/OracleStandardsandGuidelines.pdf
  http://www.gplivna.EU/papers/naming_conventions.htm
  http://www.Oracle-base.com/articles/Misc/NamingConventions.php
  http://SS64.com/ora/syntax-naming.html

  Concerning
  Girish Sharma

  Published by: Girish Sharma on March 2, 2012 15:09

  Published by: Girish Sharma on March 2, 2012 15:12

• Absent the privacy and storage room in Control Panel

  In Chrome, Miss me the privacy and storage room in the same Adobe Flash Player settings panel in non-private windows navigation/incognito mode. Other browsers work fine. Please check image as an attachment.

  

  Relocation of browser resolved the problem.
  Thanks for your help fpMonster!