Vectors seem to step

Similar Questions

• How can I make a vector seems etched in its context?

  Hey everybody,

  I was wondering if anyone knew how to make seem engraved inside is by a vector. I'm doing a ripple, serious effect on a background. Here is the image that I have at the moment: I use Illustrator cc but I also photoshop cc. Please let me know!

  The usual trick is to put layer fill to zero and use the layer style bevel & Emboss management to the bottom.  Setting to zero just fill leaves the effects, but the content of the layer is no longer visible.

  

• How much time does it take for validation in 2 steps activate once implemented?

  I finished 2 steps to verify Setup, has been reduced to the "Manage your account" page on the site appleid and saw that my secure devices are not listed. Then I typed the button 'Edit' for this article and was released. When I joined, it seemed 2-step audit is more has been implemented, so I set up a second time, receives a different recovery code. Not really thinking, I typed in "Edit" and was even once disconnected.

  Signature, looks like 2 step verification has been cleared again. I try again or should I just take awhile 2 step check to activate after installing?

  I have no idea of what the community of this post to do so please forgive me if I posted in the wrong place.

  Are you following the steps described here.

  https://www.CNET.com/how-to/how-to-set-up-two-step-verification-for-your-Apple-i d.

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

• Cannot set up my new E4200 with Verizon FIOS on my Mac

  So, I bought an E4200 today. I don't know if it's v1 or 2. The box does not say v2, so I guess it's v1.

  I'm putting in place so I have the latest version of the operating system Mac OS (10.8 Mountain Lion), the installation CD is not compatible. I'm doing a series of manual upward, and it seems that step 1 is to go to 192.168.1.1, which is the same IP that my FIOS router use, so I have everything go right instead of to the E4200.

  Someone else did this thing works with Cougar and FIOS router?

  Excellent. You have an e4200v2.

  You can look down to a few threads and see that on the issue of e2500 wireless access point. It has a link to how your linksys router cascade.

  You can also google "e4200 Cisco support." to find your support page. Your support page will have all sorts of info including how to upgrade your firmware and how to connect your router.

  Ed. Oops. I wanted to say v2

• Run Wp 5.1 (dos version) in windows 7 Home premium

  I tried to run Wp 5.1 in Windows XP, SP 3 compatibility mode, but the program will not always open.  I am reluctant to Win 7 Home Professional level and download Microsoft Virtual Pc 2007 and Win XP because it is my wife's computer, and it could cause her grief.  Also I don't know if all the drivers are working and I still don't know if XP download will leave Wp 5.1 work.

  I could uninstall Win 7 and install Win XP, but this seems a step backwards.

  Has anyone tried to use an old program back in a 64-bit operating system?  WP 5.1 ran well in Win XP Edition family or professional.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• (Redirected) Format of date of birth

  Hello. I am trying to create a profile for my account of SFR and I can't seem to step 2, which is where I have to enter my date of birth and zip code. I get an error telling me that my date of birth is incorrect. What is the correct format for the date of birth?

  Better to post this thread in the Customer Care Forum here:

  http://en.community.Dell.com/support-forums/customercare/f/4674.aspx

  Bev.

• Test database search script

  Hello

  I have a real problem to find the database search Scripts, documentation around this seems terribly poor, is anyone able to help me?

  I created my search for data based on customer information.

  When I go to database search Options > data search Scripts I use the "display Script example" for purposes of test

  Its my understanding this should contact data of research based on the email address I enter and print the results.  If its unable to find the contact it will print 'Functions of customization not found'

  I stick my 'form Autopopulation Script' in an empty html file.  First question, I have to pull the < div > out of the JS (I put it in front of the JS)

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------

  < div id = "contactinfo" > < / div >

  < SCRIPT TYPE = "text/javascript" LANGUAGE = "JavaScript" > <!--/ /.

  function CreateRow (label, value) {}

  var p = document.createElement ('p');

  var b = document.createElement ('b');

  p.appendChild (b);

  b.appendChild (document.createTextNode (label));

  p.appendChild (document.createTextNode (value));

  document.getElementById('contactinfo').appendChild (p);

  }

  function SetElqContent() {}

  If (this. GetElqContentPersonalizationValue) {}

  CreateRow (': ', GetElqContentPersonalizationValue ('C_FirstName'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_LastName'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_EmailAddress'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_BusPhone'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Company'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Job_Title1'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Department1'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Address1'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Address2'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_City'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Zip_Postal'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Country'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_ANZ_Mail_Flag1'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_ANZ_SFDC_Contact_ID1'));

  } else {}

  CreateRow ("customization not found '," ");

  }

  }

  --> < /script >

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Secondly, I paste my "Script for integration" below it:

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------

  < SCRIPT TYPE = "text/javascript" LANGUAGE = "JavaScript" > <!--/ /.

  _elqQ.push (['elqDataLookup', escape ('66c01e80420c4bc88c0cab5f149ed81a'),' < C_EmailAddress > Enter_Email Address_here < / C_EmailAddress > ']);

  --> < /script >

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  I run this page and I get an error uncaught exception in my JS Console "_elqQ is not defined.

  After a lot of research and found some final or current, I decide that I must add the following above the previous scripts (still not entirely sure on that?).  Not mentioned at all in the page that provides the scripts...

  " < script src =" http://img.EN25.com/i/elqCfg.min.js "type =" text/javascript"> < / script > "

  This seems a step in the right direction (no error console) but I do not print anything either!

  
  

  My final code

  
  

  <! DOCTYPE html >

  < html >

  < head > < / head >

  < body >

  < div id = "contactinfo" > < / div >

  " < script src =" http://img.EN25.com/i/elqCfg.min.js "type =" text/javascript"> < / script > "

  < SCRIPT TYPE = "text/javascript" LANGUAGE = "JavaScript" > <!--/ /.

  function CreateRow (label, value) {}

  var p = document.createElement ('p');

  var b = document.createElement ('b');

  p.appendChild (b);

  b.appendChild (document.createTextNode (label));

  p.appendChild (document.createTextNode (value));

  document.getElementById('contactinfo').appendChild (p);

  }

  function SetElqContent() {}

  If (this. GetElqContentPersonalizationValue) {}

  CreateRow (': ', GetElqContentPersonalizationValue ('C_FirstName'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_LastName'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_EmailAddress'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_BusPhone'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Company'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Job_Title1'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Department1'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Address1'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Address2'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_City'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Zip_Postal'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_Country'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_ANZ_Mail_Flag1'));

  CreateRow (': ', GetElqContentPersonalizationValue ('C_ANZ_SFDC_Contact_ID1'));

  } else {}

  CreateRow ("customization not found '," ");

  }

  }

  --> < /script >

  
  

  < SCRIPT TYPE = "text/javascript" LANGUAGE = "JavaScript" > <!--/ /.

  _elqQ.push (['elqDataLookup', escape ('66c01e80420c4bc88c0cab5f149ed81a'),' < C_EmailAddress >Enter_Email Address_here< / C_EmailAddress > ']);

  --> < /script >

  < / body >

  < / html >

  Okay, so I found where the complete code 'Test '.

  Settings > Setup > site > monitoring > visitor tracking > visitor tracking package.

  In these files that I found rather than the

  If (window.addEventListener) window.addEventListener ('DOMContentLoaded', async_load, false);

  Else if (window.attachEvent) window.attachEvent ("onload", async_load);

  })();

     

  Just a little more tweaking and playing, and I'm finally here Yay!

• CC files appearing not although "file synchronization" is enabled

  I use 2 iMacs in different places.  Use 'File sync' automatically saves files such as 'Actions' & "Droplets" that I created in Photoshop?  If they were created on a computer but are not appear on the second computer, how to recover?

  Hello

  It seems your steps using Creative cloud correctly Photoshop wise, if you're looking to sync think like Actions etc, then you must use synchronization settings. This can help you to using Photoshop | Sync settings using Adobe Creative Cloud.

• Recorded in header/footer - Acrobat 8 Pro / Win7

  I need to use multiple headers/footers by page.   It works fine when I get the headers/footers manually, however, when I save the different header/feet that they will "overwrite" (i.e. clear) headers that are already in place when I apply a saved header.

  Is there a way to prevent "crush" does not happen?

  Last updated.    Research has me a little more to the 'upstream' tool    I don't know what that means exactly, but I learned that if I add a header/footer registered, run 'control upstream', I can then add another header/foot to save without overwriting the first.

  So, there are at least 2 options (other than writing a script) to be able to use several feet/headers stored on a single page PDF.    Print to PDF the addition of the saved header/foot or run 'upstream' between adding the header/feet to save.

  Preflight seems fewer steps and is probably my answer for now.

  Thank you all.

• Regression of fusion 2.0.4...

  Just installed the 2.0.4 upgrade and started my Debian Sid existing VM mode full-screen.

  The menu bar of Mac OS X (for VMware Fusion) doesn't go away and now blocks access to the

  GNOME menu bar. Since I also changed the 2.6.29 kernel, the VMware tools (VMware, not

  packages of "openvm' from the Debian repositories) do not compile (even after changing to the)

  correct version of gcc - 4. (3) I have to downgrade to 2.0.3 and the 2.6.26 kernel for now...

  I call it a regression.

  hkoster1 wrote:

  Well wooded, this core question is just a matter of time, I realize that. and this is no big problem back 2.6.26.

  Real regression in 2.0.4 is this darned, menu bar which also refuses to get in the way in another virtual machine with Ubuntu

  Installed jaunty. I think Ubuntu is supported by VMware, and this casual has problems a week before going official

  seems a step backwards for me. It must be something for VMware to worry.

  Have you tried to uninstall/reinstall VMware Tools in the affected virtual machines and or uninstall/reinstall Fusion 2.0.4 and you post the MD5 checksum in the .dmg disk image file that you have installed since then to ensure it is a valid .dmg disk image file?

  BTW, you are a spokesperson for VMware?

  NO.

• Impossible workflow of fire at the University Complutense of MADRID 11g

  Hello
  
  I created workflows of criteria at the time of the recording I provide the specific criteria.
  But the workflow does not appear in the list of active workflow, that is, the workflow does not get fired.
  
  Please let me the solution for the same thing.

  Just guessing now:

  1. perhaps the list of users is empty in the workflow step so that the content between and falls immediately? Or used aliases has no associated user so it seems that step a users but does not work.
  2. perhaps there is custom code that is originally the content jump out of the workflow?
  3 perhaps metadata used to capture the document to the workflow are actually not matching. For example a rule derived from the value may change the value of the metadata.
  4. check the historical table of the workflow in the comic book to see if the content is actually showing only incoming that will tell you if she even makes the workflow at all.
  5. check the metadata about an item that was supposed to get into the flow of work and ensure that it is corresponding to the security group and another metadata field that you defined.
  6. create a workflow simple test as security group = public and title = document workflow test with your user, as editor-in-Chief and archive a document with this title to see if it captures. No custom or special code jumps simple one-step workflow.

  Who can help you find what is missing

• Ripple Delete for PE9 (Mac)

  I have a lot of very short clips on 15 different time lines.  Due to my editing process, most of the clips not abut each other.   How can I remove gaps on each scenario or for all the timelines at the same time.  I can't find a button or ripple delete dropdowon.  It is the EP 9 on a Mac.  Thank you.

  Thank you for pointing this out. Now, all of this makes sense to me.

  Unfortunately, as you will have Clips above the others, which will prevent the use of Rt-click method "delete and close space. Seen the Clips (Audio or video) above where there is a gap, eliminates this method.

  We can now "lasso", basically, with the cursor, select several Clips and drag them as one. With Snap ON, if a dragged a group of Clips, video Track 2, to the left or to the right, for example on the program could yield them to the head or the tail of an another Clip, either above or below 2 video track. However, with so many Clips on so many video titles (more), the Clips that you are moving will be snapping at all--can be very frustrating.

  I think I will start with a video track and her videos, each video track 1 or maybe the video track in the foreground and then manually are contiguous, after I had done it all necessary trimming (essentially setting the In and Out of the clip as necessary or desired) and then any tightening. Once completed, I would skip to the next track of the video and do the same thing.

  Obviously, you want to end up with say the Clips on the video track 1, starting at 00. 00; 00; 00 (unless you add something like a title, black Video or other) and how far the end of these Clips. Then, on the next video track, your Clips will start where the previous ended and so on. If one were to examine the video tracks, this would seem like "steps".

  Once you have the clamps on their video track and then moved en masse to start, where the previous ended, things will be much easier. Snap will be easier to deal with and so very useful.

  Now, PrPro facilitates such an arrangement, because it allows to make sequences, and each has its own scenario. The user would put their 25 Q & A sessions in 25 sequences and modify each sequence completely. Then, we could use various methods to combine them all in a timeline. One method would be to create a 'main sequence' and then copy of each of the individual sequences, paste it into the 'master '. Another method would be to use the nesting sequence, but one would still need to 'shift' the material to the nested sequence, so that each does not overlay another. I often use this first method, in some of my productions, where each "segment" has it own sequence and timeline, and then I combine them in a sequence/timeline 'master '. However, this method is ONLY available in PrPro and not before.

  I keep tryig to find an "easy" way for you to work on your project, to keep clips completely free Audio track, but before has no way of blocking (as a PrPro, and as I filed feature requests for) and lack the track targeting capabilities, as fully as PrPro , so I see no way, but manually move the Clips on their respective titles of the video and then by creating this provision "stairs".

  As I use PrPro much before, I could be missing something here, but you could Explorer group, where you select Clips, as well as on the same video track and choose the group. I thought with more vertical grouping, so don't know not if it will be effective when you group horizontally?

  Maybe others can offer advice or suggestions, to make life easier for you, and I keep you thinking about, in case something goes off in my mind.

  Good luck, and the big question - you really got me thinking on this one!

  Hunt

• Sweet Illustrator files?

  Hello Forum

  I'm learning my way around after effects and Illustrator CS4.

  How is it that when I import AI files in After Effects, vectors appear soft?  somwhere along the lines the vectors seem to be converted into a bitmap.  I remember after effects 5 there was a vector button in the timeline that could be used to refine the vector lines.  I don't find in CS4...

  I am importing of contours, no fonts.

  Any idea is appreciated.

  Thank you.

  SK

  In the column of switches in the timeline, the second switch from left to right, you will find continuously rasterize icon. It looks like a small Sun. Turn it on, and providing that the composition window is set to full resolution and Correction of the Pixel format is disabled for the place not BY comps, your vector layers will look sharp in the comp window and make it very well.

  Some effects applied to Illustrator objects force rasterization of these layers in After Effects. In this case, you can modify the rasterization of the document settings in Illustrator and re-save the file so that they behave better, or you can delete the layer effects that cause problems and to reproduce the effect of EI. There is no layer effects that force the pixelation that cannot be reproduced inside the AE.

• HTML vs Word

  Just following another recent request on this subject. With Vista not supporting Winhelp we moved to output HTML but always using the word for the basic document.
  What are the main advantages of the use of the Word HTML editor?
  We tried a conversion of sampling, but he made a mess of text styles and formats. However, we encounter a few a number of problems with the project to the word and I was wondering if moving to HTML for you. A colleague (more knowledgeable than me) is of the opinion that using Word for help docs is a dying practice and can be difficult to support in the future. Perhaps, but most people are familiar with Word rather than a separate editor so I hesitate about moving even if we can solve the problems of conversion (and unfortunately the document is full of local styles).

  Thanks for the comments. I guess I'll have a quartet to the ball sooner than later and see if it stops the problems we had. Seems a step back a bit, however, lose the word link. Well.

• How can I configure on a second two-factor authentication apple that isn't an icloud but rather my itunes account account ID? Only, I seem to be able to use two steps on the second account.

  How can I configure on a second two-factor authentication apple that isn't an icloud but rather my itunes account account ID? Only, I seem to be able to use two steps on the second account.

  You can not. Two Apple factor authentication is a feature of iOS and OS X, based on your AppleID being associated with iCloud account to send and receive authentication 6-digit codes. An AppleID that is not associated with iCloud account cannot be used for 2-factor authentication.

  For Apple ID - Apple Support two-factor authentication

  You can set up validation in 2 steps (which is different) with any AppleID - see frequently asked questions about check in two steps for Apple ID - Apple Support